Similar Questions

• Server Terminal Server 2000 running, Memory Dump, restarting and checking bug error 0x0000007f

  I've been to dump memory and blue screen on a Windows Server 2000 Terminal Server running.

  I had to change the server for a complete memory dump to just check bug 64 MB because memory dumps were fill the C drive and it is the same mistake each time it fails.

  It is a production server and is vital to my business.

  I don't want to just install the 5 or 6 different patches from Microsoft that references the same exact error code, error message stop and symptoms for Server 2000.

  I just replace the memory new inside with two sticks and I even changed the boxes it was with one that has no hardware problem as I have a few of them.

  So he this 2000 Server had the motherboard, processor, memory, network, Audio card, changed video cards and I always get this accident a few times a day.

  I can't find anything definitive on this so if anyone has had the same problems and found a solution, then I'd be very happy to help.

  I am doing a complete network upgrade in the next month or two.

  My work is located in the middle of the busy season and I cannot take the server down and impossible to install anything that could cause a hard accident and not to start again.

  I'm in the middle of an upgrade of the network and we'll go virtual with this server with as many others as I can.

  I need to this Terminal Server to stop crashing and to find a solution for it, while the summer crowd is full swing at my work and it will improve after this summer.

  Any help would be awesome.

  Thank you and sorry for the long post.

  Here's the info I get from BlueScreenViewer when you look at the minidump

  Bug UNEXPECTED_KERNEL_MODE_TRAP control chain

  Bug check code: 0x0000007f

  Parameter 1: 0x00000008

  Caused by the driver ntoskrnl.exe

  Plant address: ntoskrnl.exe + 66e09

  32 bit processor

  This forum is for the support of end users, the users of the computer at home, have problems with Windows.  People server all hang out them in the TechNet forums then you might want to try this post it there instead.

• Update of security for the SQL Server 2000 Service Pack 4 (KB960082)

  I have tried to run this update for MONTHS now, but have not had the time to research the problem so far.

  I am running Windows XP Professional Version 5.1 (Build 2600.xpsp_sp3_gdr. 090804-1435: Service Pack 3)

  When I try to run the update, the installation fails. Update history gives me the error Code: 0 x 643.

  I went to the Article number 958052 Knowledge Base that had me activate the logging, update retry and off the record. He then told me to contact Microsoft Support for assistance. But when I tried to do this, Microsoft wanted to charge me $259 for help. I'm sorry, but I don't think that I would have to pay for Microsoft fix their own mistakes.

  The last really successful update was KB978542 on 02/06/10, but number KB979683 says also has been a success, it reinstalls whenever I have try KB960082.

  As far as I know, I don't even have SQL Server 2000 installed on this computer. If I do, I've never consciously used, so I don't know yet why I need this update.

  Can anyone help me get this update installed so I can move forward?

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6d6211e2-c7f5-43f3-951f-744769442589 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Appears license expired & deleted after restarting the service

  Hello Foglight community,

  I'm having a strange problem, I have an expired license and every time I restart the server this vFoglight to hosts, the license is displayed again.

  How can I remove this license for good?

  Thank you in advance.

  Kind regards

  Guillermo. -.

  Check this support solution KB

  https://support.quest.com/SolutionDetail.aspx?ID=SOL82145&category=solutions&SKB=1&product=Foglight

  Solution SOL82145

  return

  Title

  License file Old (Expired) appears when you restart the machine vFoglight.

  Description of the problem

  The old license file appears in the console at fresh vFoglight startup.

  Cause

  Problem is that the old license file still exists in the directory forcing vFoglight server to check the licenses.

  Resolution

  Steps to fix the problem are as below

  1. VFoglight server connection.
  2. Delete the old license file located in the /license directory
  3. Restart the machine vFoglight

  Hope this helps

  Golan

• High on the Server Terminal server using the server Esxi5 host CPU utilization

  P2V fact for a server terminal server 2000 on Esxi5. The problem is its high CPU usage showing when 4 or 5 users are connected and then it freezes.

  Already maximum data to the processor, but it is still an issue.host server had 2 processors with 12 cores and got 1 Server terminal server as a guest.

  Help, please...

  A few days ago, I wrote a blog about this problem and the solution:

  http://vknowledge.NET/2012/02/25/Windows-2000-Server-on-vSphere-5/

  Kind regards

  Mario

• License expired Message Server

  After starting MAC OS Server 5.2 websites and create a new Web site (actually a mirror of an existing site of very simple server implementation) I open Safari and try the URL and I get the message:

  Please ask your server administrator to install the license.

  If you are the administrator, please connect to the administration.

  The Web site service is set to point to the static IP address of my Mac - Pro running MAC OS Server. All files are in place. If I use https://aaa-macpro.local/default , I see the default Web site.

  But if I try to arroyohome.com which is the URL of my Web site which is set to point to the static address of the Mac - Pro MAX OS Server operation you get this server license expired Message. I do not use certificates at this stage

  The problem is resolved. I uninstalled MAC OS Server and started from scratch. After making sure that I was the only person in my network and also by ensuring that the server created a DNS entry for my server, I made the tutorial on websites (Lesson 1) and tested that the default Web sites are created correctly and that everything started working.

  BTW, the server license expiration message was / is incorrect. Browsers were all complaining about certificates and refusing to accept the ones I created. Expired "500 Server license" error is a catch-all message. The site that I am hosting is not encrypted, but MAC OS Server encrypts the default Web site on port 80, which may () caused a lot of questions because I was deploy my site. On lesson 2

  Step 7. Check the redirection to the secure site

  I disabled this function for my deployed site...

• license Terminal server

  I need to move some licenses from the server terminal server to a new server, but could not find the original documents for these licenses. Is it possible to get information so I can move them to a new server?

  Hi BarrySalas,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Services Remote Desktop (Terminal Server Services) on TechNet. Please post your question in the TechNet Windows Server forum.

  (Services Terminal Server) remote desktop services

  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads

• Services Terminal Server under Small Business Server 2008

  I have small Business Server 2008 Standard and you bought 5 client access licenses. I'm unable to use the client access licenses - will they work with Small Business Server 2008 Standard? I'm not an expert in this area

  Hello

  Your linked windows question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the Remote Desktop Services TechNet Forum:

  (Services Terminal Server) remote desktop services:
  http://social.technet.Microsoft.com/forums/en/winserverTS/threads/

  Hope the information is useful.

• I managed to install user Terminal Server 2003 10 CLIENT access on a Small Business Server Premium 2003R2 licenses but I've always allowed 2 simultaneous connections.

  The Terminal server server is located on the the same computer as the SBServer also I have validated licenses with Microsoft as well as installation.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Activation of Server Terminal server licenses

  I have a question on a server terminal server licensing. I used the version of the Server Terminal server before 120 days. After that, I bought a server terminal server licensing by user. I called Microsoft to activate it. I was able to activate successfully. But how do I know Terminal Server that I use now is 120 days or active version? I saw no different between activate before and after turn on.

  Hey PantakarnSantawanphaet,

  For assistance with Terminal server please join the IT Pro community community TechNet link below:
  TechNet - Windows Server - Remote Desktop Services (Terminal Services)

• Licenses on the Terminal Server

  Hello.  We have an application that runs on a computer that is accessing the Acrobat object model to run code to manage PDFs on the PC.  We want to put this on a Terminal Server, which will be used for up to 6 people at any time.  I don't know what are the terms of licensing Terminal Server, I rang sales, they have said that his company, they said his support and finally, they said "we'll call back you today", but did not.  The real product is never opened by the users, we just want to access the model object programmatically. Help appreciated.

  The EULA does not allow. For a special permit, you need to talk with Adobe... We cannot really help you with that.

• Acrobat for the Terminal Server: Options and licensing

  Hi team,

  We need adobe Acrobat Professional for Terminal Server. Need us about 5 licenses for team A.

  Now the total number of Terminal Server users is 20, but only members of the team need to users of Adobe Acrobat pro i: e 5

  (1) first we can deploy Adobe acrobat Pro in a terminal Server 2012

  (2) how does the license

  
  Could you please tell me my options.

  Thank you

  Hello

  Please see Acrobat on Terminal server license

  Kind regards

  Sheena

• a base license can be installed on a server terminal server?

  What type of license you have to have to put on a server terminal server. talk about Presentation adobe acrobat Pro 11

  Hi Chopper6677,

  Please go through the link below.

  http://wwwimages.Adobe.com/www.Adobe.com/content/dam/Adobe/en/legal/licenses-terms/PDF/CIT rix_policy_acrobatX_AXI_11-12 - 2012.pdf

  Kind regards

  Anand

• Whenever I connect to a remote connection, I get an error message "unable to connect to this Terminal Server session remote control"

  Original title: unable to connect to this Terminal Server session remote control?

  Whenever I work with my friendly by connecting remotely, this information is pop ups as follows:

  Remote control cannot connect to this Terminal Server session. It is a known problem with Windows 2000 and XP and can occur under certain, rare conditions. To remady this situation, ask the local user switch to another session (connecting, on or off), or restart the computer.
  I know it's something related to windows authentication. But want to know in detail about this notification.
   

  Hi Victor,

  The question you posted would be better suited in the TechnNet Forums.

  I would recommend posting your thread in the link below:

  (Services Terminal Server) remote desktop services:

  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads

• 2611XM Terminal Server + ACS + new authentication when selecting menu options

  Hello

  I managed to configure ACS authentication on my 2611xm router,

  After you connect to the router, I have an autocommand configuration to run a menu.

  My problem is when you select the option in the menu,

  You are then re invited to reauthenicated against the router before connecting to the line,

  can someone tell me how to prevent it.

  Thank you for your time and effort in advance, I have attached a config below.

  DDRAS01 #sh running-config

  Building configuration...

  Current configuration: 6854 bytes

  !

  ! Last modification of the configuration at 10:28:49 GMT Sunday, February 21, 2010 by

  !  NVRAM config update at 19:25:53 GMT Saturday, February 20, 2010 by

  !

  version 12.4

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  encryption password service

  Service linenumber

  sequence numbers service

  !

  hostname DDRAS01

  !

  boot-start-marker

  boot-end-marker

  !

  Security of authentication failure rate 3 log

  Passwords security min-length 6

  logging buffered 51200 informational

  record of the rate-limit all 10000

  recording console critical

  enable password 7

  !

  AAA new-model

  !

  !

  AAA authentication login default group Ganymede + local

  AAA authentication login if_needed local

  the AAA authentication enable default

  AAA of authentication ppp default local

  AAA authorization exec default group Ganymede + local authenticated by FIS

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  !

  AAA - the id of the joint session

  clock timezone WAS 10

  summer time clock WAS recurring last Sun Oct 02:00 last Sun Mar 03:00

  no location network-clock-participate 1

  No network-clock-participate wic 0

  IP cef

  !

  !

  !

  !

  list of IP domains

  list of IP domains

  IP domain name

  the IP 2033 172.16.1.1 host dd-cr-01F

  ddsws01 host IP 172.16.1.1 2034

  ddsws04 host IP 172.16.1.1 2035

  ddce565 host IP 172.16.1.1 2040

  IP-name server

  IP-name server

  !

  !

  !

  password username d ' operators 15 7 privilege

  !

  !

  property intellectual ssh source interface FastEthernet0/0

  property intellectual ssh event logging

  property intellectual ssh version 2

  !

  !

  interface Loopback0

  IP 172.16.1.1 255.255.255.255

  !

  interface FastEthernet0/0

  IP 255.255.255.0

  Speed 100

  full-duplex

  !

  interface Serial0/0

  no ip address

  Shutdown

  !

  interface BRI0/0

  no ip address

  encapsulation hdlc

  Shutdown

  !

  interface FastEthernet0/1

  no ip address

  Shutdown

  automatic duplex

  automatic speed

  !

  IP forward-Protocol ND

  IP route 0.0.0.0 0.0.0.0

  !

  IP http server

  no ip http secure server

  Ganymede IP source interface FastEthernet0/0

  !

  radius of the IP source interface FastEthernet0/0

  exploitation forest installation local6

  logging

  SNMP-server RO community

  SNMP-server RW community

  SNMP server location

  contact Server SNMP d ' operators

  !

  title of menu ddras01 ^ C

  Server Terminal Server for Cisco

  Select number from the list below

  Use "ctrl + shift + 6" then 'x' to switch to the menu

  ^ C

  text of ddras01 to menu 1 connect to the DD-CR-01

  order of menu 1 ddras01 resume JJ-cr-01 / dd-cr-01 2033 telnet connection

  ddras01 text menu 2 connect to DDSWS01

  order of menu 2 ddras01 resume ddsws01 / ddsws01 2034 telnet connection

  text menu 3 ddras01 connect to DDSWS04

  order of menu 3 ddras01 resume ddsws04 / ddsws04 2035 telnet connection

  text menu 8 ddras01 connect to DDCE565

  order of menu 8 ddras01 resume ddce565 / ddce565 2040 telnet connection

  menu 9 ddras01 text output

  menu ddras01 command menu-exit 9

  ddras01 menu clear-screen

  menu ddras01-status line

  menu-ddras01 line mode

  radius-server host 10.2.0.50

  RADIUS-server application made

  radius-server key 7

  !

  control plan

  !

  privilege exec 15 level write terminal

  writing level 15 privileges exec

  Ping privileges exec level 1

  privilege exec 10 undebug ip icmp level

  privilege exec 10 undebug ip level

  level of privilege exec 10 undebug all

  privilege exec 10 undebug level

  terminal monitor exec level 10 privileges

  privilege exec 10 level terminals

  privilege exec 15 level show running-config

  See configuration at the privileged exec level 5

  show privileges exec level 5

  privilege exec 10 debug ip icmp level

  privilege exec level 10 debug ip

  privilege exec 10 level debug all

  debugging privileges exec level 10

  clear interface of privileges exec level 10

  clear counters at level 10 privilege exec

  level of privilege exec 10 clear

  !

  Line con 0

  password 7

  Synchronous recording

  line 33 64

  No exec-banner

  exec-timeout 0 0

  no activation-character

  No exec

  preferred transport telnet

  transport of entry all

  character of exhaust-27

  StopBits 1

  FlowControl hardware

  line to 0

  line vty 0 4

  password 7

  Synchronous recording

  ddras01 menu autocommand

  line vty 5 181

  password 7

  Synchronous recording

  ddras01 menu autocommand

  !

  NTP-period clock 17208487

  source NTP FastEthernet0/0

  NTP server

  end

  Hello

  You have aaa login default configured for authentication, with this you get invited

  When you try to access the line.

  Under line VTY 5 181 try adding:

  authentication of the connection /NOAUTH

  exec authorization /NOAUTH

  Add the lines of aaa:

  /NOAUTH AAA authentication login no

  /NOAUTH AAA authorization exec no

  This should stop the authentication to the lines.

  -Jesse