Test application built using JRE 5.0 on OS 4.6

Similar Questions

• How to set an application built using the C API for myRIO 3.0 to run when starting on a myRIO-1900

  It is even possible to define such an application to run at startup? If so how would you do it?

  I've compiled a program using the API and eclipse distribution OR and can run Eclipse or by running while SSH in the myRIO. Is the only document I could find about this one: http://digital.ni.com/public.nsf/websearch/B37FA04A1CB84B6C862571A30060EF03?opendocument&Submitted&&...

  The link is a little outdated, so I'm not sure of the relevance, it is today. I changed the lines of lvrt.conf to:

  RTTarget.ApplicationPath=/c/ni-rt/startup/startup.rtexe
  RTTarget.LaunchAppAtBoot = True

  None of the settings seem to do anything. I also tried to run the program as a script using rc.local which does not seem to be used in the same way as it is in Ubuntu. My compiled pogram does not include the .rtexe extension although I can add it later that might not be the same.

  I made sure that startup programs 'disable' has been disabled on the Server Web myRIO.

  Thank you

  Just in case someone has a similar question:

  https://decibel.NI.com/content/message/144527#144527

• How to simulate a DAQ hardware and use it to test applications without hardware?

                         How can I simulate a DAQ in MAX material and use it to test applications without hardware?

  If my application requires input from external hardware to do how can I simulate a DAQ hardware in LabVEIW?

  I need to simulate several digital inputs and outputs to test the software. currently I have not the material and material DAQ here.

  answer with your valuable suggestions.

  Thanks in advance

  RENN

  Hello

  There is no option to simulate the traditional device. You need hardware for it so I would say to simulate a PXI system that has a configuration similar to the PCI-6014 and make a small change to your request...

• DPS test app built, but do not launch on iPad (air2)

  Ive built an application using the generation feature app in Adobe InDesign cc 2014 after my folio was done and I created the certificates according to the step by step guide, but my test application will not launch on iPad. the icon remains stuck in grated being on and the installation of say. After letting it go for 45 minutes, I tried the removal and reconstruction of app, but does the same thing. During an hour has passed and it is yet to complete the installation. I did something wrong? Anyone of these problems?

  Chris

  If it does not appear greyed out which means the mobileprovision file you used to make the app has no UDID of your device inside. Make sure that the device ID is in the mobileprovision file and you are using the correct mobileprovision file, and then try again.

  Visit this link for more information: https://helpx.adobe.com/digital-publishing-suite/kb/unable-install-developer-ipa.html

  See you soon,.

  Vikas

• formsweb.cfg use JRE 7

  Installed: OL6 Update 4, Java 7 update 17, wls1036_generic.jar, Fusion of forms and reports 11.1.2.1
  
  I can access the forms on my desktop where I manually installed JDK/JRE 7 update 17. I'm going to hurt access from my laptop where I have not manually installed JDK/JRE 7. I'm trying to get the Forms Server to install to test my setup as follows. I would also prefer to have these parameters be dynamic, in that it still load the latest version of JRE 7.
  
  Parameters used in formsweb.cfg
  
  -jpi_download_page = http://www.oracle.com/technetwork/java/javase/downloads/index.htm
  
  -jpi_classid = clsid:CAFEEFAC-0017-0000-FFFF-ABCDEFFEDCBA
  
  -jpi_codebase = http://java.sun.com/update/1.7.0/jinstall-7-windows-i586.cab#Version=1, 7.0
  
  -jpi_mimetype = application/x-java-applet
  
  
  
  Thanks in advance for any help/advice.

  First of all, you have to decide is whether or not you need to use Internet Explorer 64-bit. In most cases, there is no reason to use it. The default IE in Win7 is 32 bit, even if you use the 64 bit OS. This is important because you must use a 32-bit JRE with a 32-bit browser and 64 with 64. So, in your case because you also have XP clients, you need to configure to use JRE 32 bit on all the client machines.

  In General, if you can get a form to run in a browser version it will run in any version. So, that means that once you have configured any version of IE (32 bit) and all other versions configured for any version of FF, should work. If they don't, it means that you have a problem with browser configuration (e.g. security settings blocking the JRE) or there is a problem of compatibility between the browser and the JRE.

  This configuration should work for all the browser with forms 11.1.2.1 certified

  jpi_classid=clsid:CAFEEFAC-0017-0000-FFFF-ABCDEFFEDCBA
  jpi_mimetype=application/x-java-applet;version=1.7
  jpi_codebase=http://java.sun.com/update/1.7.0/jinstall-7u17-windows-i586.cab#Version=1,70,17
  jpi_download_page=http://www.oracle.com/technetwork/java/javase/downloads
  

  Be sure to view the information of Client Certification forms for 11.1.2.1

  http://www.Oracle.com/technetwork/developer-tools/forms/Oracle-Forms-111210certmatrix-1886127.xls

• Essays not published updated folio in the new test application

  Hello

  Here is my situation;

  Version of the app and folio currently in the app store: v26 (v26 is also the version of the folio "published" to the application direct)

  Update app submitted to app store version: v27

  Version of the folio uploaded to the producer of DPS (but not "published" / "day"): v27

  Version of the viewer of content on iPad: v28

  Version of the "test app" built in App Builder: v27

  Here's my question: how to test my new v27 folio with a test v27 application?

  I tested the folio v27 with v28 Content Viewer, but because I updated the Content Viewer in v26 to v28, I didn't have the ability to use content v27 Viewer. Any advice?

  Thank you

  DW

  Ah! I get it. Build your own version of the Adobe Content Viewer that v27 target. Create a new application in App Builder in the Details page of the application "Adobe Content Viewer" as type of app, then select change the v27 version. Then install that on your iPad, log in your account and you will see the new folio.

  Neil

• License Manager for applications built in LabVIEW

  What I have is a licensing system to add to applications built in LabVIEW that works more or less like a volume, or as FlexLM license server, where a customer is allowed to so many instances/seats of a program.  Most of what I found looking around my own has been for licenses Add-ons for LabVIEW, which is not what I'm looking for (it's what makes third-party attribution license and activation tool box, for example).  I want it to work like saying the CAD program to work - we have X licenses to run SolidWorks, so when someone starts the program, it fist check with the license server to see if a license is available.  If so, the application opens, and then withdraw the license when the app is left.

  I found Protection PLUS 5 of SoftwareKey SDK.  It looks pretty good.  I like that they have a licensed server product that manages the whole "set up a license server" for me.  I think that some (or a lot) of work, this could be useful.

  The problem I have with the product is that it's a terrible LabVIEW library.  It is not to add to the palette of features anywhere.  Not one of the screws included have a description.  They don't follow things to standard LabVIEW style, like the error code from the lower left and the lower right (actually go in and out of the top middle).  They have an online site that lists what each command and how it works, but it's a pain to work looking back from a webpage to LabVIEW.  The only example they included is a little obtuse.

  So I guess I have two questions.  The first is, has anyone used 5 over Protection, and what did you think of him?  The second is, is there an another add-on which recommend you people?

  Oh, just remembered, but I don't know if it has this feature - http://sine.ni.com/nips/cds/view/p/lang/en/nid/211731

• Support adding custom box in an application built in LabVIEW 2009

  Hello

  Can someone please help me add custom box in an application built in LabVIEW 2009? I had successfully built my application in labview 8.6, 8.5 and 8.2 before including custom on the box. However, when I tried the same method in LabVIEW 2009, it only shows about LabVIEW 2009 box rather than my custom on the box.

  Here's what I did:

  (1) a written one "on Application.vi" in the folder VI built;

  (2) included this "On Application.vi" in the "Still included" section in Application source files to build;

  (3) built on demand;

  (4) Ran the built application, the box about showed only LabVIEW 2009 subject (attached a picture).

  You can see that it is my custom icon on the top left corner of the image.

  Your help is greatly appreciated,

  Cathy

  Thanks Christian. To place a check mark in the 'use LabVIEW 8.x file layout' box did not work. I found a solution although LabVIEW 2009 has this inherent problem of not showing custom on the box, and there f2 patch to fix this problem.

  Cathy

• BlackBerry smartphone to test applications

  Hello

  The members of the forum can advise on how to test applications on real hardware. I just bought a 'sim free' Pearl 9105 from amazon. But I paid no attention... it's actually from a 3rd party vendor, and they sent a device unlocked with logo orange etc. He has problems with the WiFi, no app store App etc. I also had a wait upgraded to OS 6. It did not work on after spending much time after the methods advised, I gave up. As it is not provided, as announced, I return it. But only just read the return policy and it is not favorable. My mistake I might, if it was directly from Amazon, which would have been more just.

  Which leaves me a strange feeling. What are the developers officially supposed to do? Rather than being messed around, is there a standard way to get a feature of development that are available with the version of required operating system etc. ready to go. I hate wasting time with all this and would rather be sitting here software test and writing and above all contributing to the platform. In any case, perhaps with feedback from other developers it will all become clear.

  I actually look for os 6 upgrade would be a piece of cake and solve all these problems, but it now seems more that I joined the pirates rather than BONE fide developers, and this isn't what I want to do :-)

  Help, please

  Hi, I am also a new developer is just beginning to find some things again, but I can give some useful suggestions for you:

  First of all,

• Create an application that uses BIS

  Hello, I'm new to this,

  NYW, my question is simple.

  I made an application that uses the Internet to view pages, to get the XML...

  When I tested it on a device, all seem to operate when the aircraft was on a wifi connection.

  But when the device using BIS or BES, this will not work!

  so can you please give me a sample code to see how I can be able to use BIS or BES.

  Sorry for my English.

  check these:

  http://supportforums.BlackBerry.com/T5/Java-development/different-ways-to-make-an-HTTP-or-socket-con...

  http://supportforums.BlackBerry.com/T5/Java-development/sample-HTTP-connection-code-and-bis-B-access...

• How do you remove Simulator Test applications?

  I use the BB plugin for Eclipse and have created a few test applications. My 'Office' Simulator now has icons for them and I would like to delete all but one or two. How do I do that? Whenever I have raise the emulator, they are there.

  Thank you.

  Go to the folder of Simulator and

  Delete all *.dmp file

  Delete all the files (* .cod, * .debug, * .jar, *.cso, *.csl) related to the applications that you want to remove.

• Close applications that use ports 80, 443, 8000, 8002 and 8004

  Operating system: Windows 7 Professional

  I set up a test server that is demanding that I closed all applications that use ports 80, 443, 8000, 8002 and 8004, because these are required by the Test Server. I don't know how to do this. Any help would be greatly appreciated.

  Best,

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• No connection option of right for the Windows test application

  I built a test application for Windows 8.1 and everything works but there is no option for connection within the app to qualify.  I activated the rights in the application builder, he has made to my server to existing law, but I can't find the connection option in the application itself.  Free folios are appearing, but no paid folios aren't.

  Can someone point me to what obvious step I have to Miss?

  Drag on the location of the application and tap on what seems to be the Sign In System. It's actually the Sign In option for the application. Let us know if it does not work.

• HP workspace: is it possible to try HP work space with applications that uses my business?

  Hey everybody,

  Is there a way to try HP work space with applications that uses my business?

  Thank you

  Bill

  Yes, buyers of all bundle HP Elite x 3 on or before January 31, 2017 can enjoy a free 60 days HP Workspace Premium service launch promotion offer.5 which is more a $150 value per user! 6. contact your partner HP or HP account representative to activate the free promotional offer for 60 days.