test DB has no AMM, the request takes 5 seconds, the prod DB has AMM query takes 5 minutes
I created a copy of test of production for a long time, when I was creating the test I have not activated AMM.
A developer created a new report and told me that it took seconds to run on the Pb test, as he was taking up to 10 minutes on the Pb of the production. I got it to extract the SQL code for the report and he ran from a command line, and on the Pb test, it took 5 seconds and more than 5 minutes on the Pb of the production.
I then checked the AMM with the show memory_target parameter to see if AMM was activated and on the Pb of the prod is 1 GB on the DB test is 0
memory allocation requests show this for prod:
NAME VALUE
------------------------------ ----------
PGA maximum allowed 578929664
pga_aggregate_target 0
SGA_TARGET 0
MEMORY_TARGET
-------------
578929664
for the BP to test:
NAME VALUE
------------------------------ ----------
PGA maximum allowed 214604800
pga_aggregate_target 101711872
SGA_TARGET 624951296
MEMORY_TARGET
-------------
839556096
I have not dbcontrol currently enabled on the Pb test, so I could not watch the advisors of the memory, but it is enabled on the Pb of the prod, that tells me it should be to the 1 GB is currently at.
Two of these db are on the same server.
Now I wonder if I should disable the AMM on the prod server and allocate manually to match the test, or should I change the AMM if possible so that it can perform as good as the Pb of test?
Thanks in advance.
I tried the suggestion of Geert earlier but I forgot to mention that it made no difference.
However, I managed to find out what it is, starting at the beginning by looking at all the init parameters. It was then that I noticed the Prod OPTIMIZER_FEATURES_ENABLE was set to 9.2.0.8, while the test was 11.2.0.3, a quick alter system set optimizer_features_enable = '11.2.0.3' scope = both and the query ran<5 seconds,="" just="" like="" the="" test.="" it="" also="" got="" rid="" of="" the="" note="" that="" the="" cpu="" costing="" was="" not="">5>
I thought a bit more wording accurate in the order note explain plan could be useful - but in any case, it makes sense, I guess...
However, this has been a useful exercise for me, I have a better idea how they use the remote database for retrieving information and will make suggestions, it may be easier to create views of the side remote (SQL Server), rather than on the side of the Oracle.
Still do not know how the test done with the right parameter and the prod has not, I used to create the init.ora file to create the test instance by getting a carbon copy of the production spfile, but I missed this setting this time.
In any case, it's a good thing I had the right parameter under test - otherwise the Developer & users may have accepted, he was going to be a slow and left...
Thanks again for all your help
PS. Now here is the plan explain of production:
SQL> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(NULL,NULL,'ALLSTATS LAST')); SQL_ID bqh1aq71rshpp, child number 1 ------------------------------------- SELECT /*+ GATHER_PLAN_STATISTICS */ DOMCUST.CUSTOMER,DOMHEADER.WOODTYPE,DOMHEADER.ISSUEDATE ISSUEDATE, vw_testlots.TLOT_PREV PREV_LOT, VW_TESTLOTS.TLOT_NEXT NEXT_LOT, DOMLOTS.lotno ship_lot, VW_PTMS_LOTS.AIRDRY AIRDRY,VW_PTMS_LOTS.BRIGHTNESS BRIGHT,VW_PTMS_LOTS.DIRT DIRT,VW_PTMS_LOTS.VISCOSITY VISCOSITY, (A.CCSF_0+B.CCSF_0)/2 CCSF_0, (A.TEAR1_0+B.TEAR1_0)/2 TEAR1_0, (A.BL_0+B.BL_0)/2 BL_0, (A.BURST_0+B.BURST_0)/2 BURST_0, (A.BULK_0+B.BULK_0)/2 BULK_0, (A.POROSITY_0+B.POROSITY_0)/2 POROSITY_0, (A.BOND_0+B.BOND_0)/2 BOND_0, (A.OPACITY_0+B.OPACITY_0)/2 OPACITY_0, (A.CCSF_1+B.CCSF_1)/2 CCSF_400, (A.TEAR1_1+B.TEAR1_1)/2 TEAR1_400, ( Plan hash value: 2207188603 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads | Writes | OMem | 1Mem | Used-Mem | Used-Tmp| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | 0 | SELECT STATEMENT | | 1 | | 255 |00:00:05.90 | 1091K| 45 | 45 | | | | | | 1 | SORT AGGREGATE | | 255 | 1 | 255 |00:00:00.91 | 385K| 0 | 0 | | | | | |* 2 | FILTER | | 255 | | 57880 |00:00:01.11 | 385K| 0 | 0 | | | | | |* 3 | TABLE ACCESS BY INDEX ROWID | LOTTEST | 255 | 1 | 57880 |00:00:00.99 | 385K| 0 | 0 | | | | | |* 4 | INDEX RANGE SCAN | UK_LOTNO | 255 | 45 | 767K|00:00:00.85 | 5015 | 0 | 0 | | | | | | 5 | SORT AGGREGATE | | 255 | 1 | 255 |00:00:00.52 | 158K| 0 | 0 | | | | | |* 6 | FILTER | | 255 | | 55792 |00:00:00.47 | 158K| 0 | 0 | | | | | |* 7 | TABLE ACCESS BY INDEX ROWID | LOTTEST | 255 | 1 | 55792 |00:00:00.36 | 158K| 0 | 0 | | | | | |* 8 | INDEX RANGE SCAN | UK_LOTNO | 255 | 45 | 516K|00:00:00.55 | 1372 | 0 | 0 | | | | | | 9 | SORT ORDER BY | | 1 | 1 | 255 |00:00:05.90 | 1091K| 45 | 45 | 70656 | 70656 |63488 (0)| | | 10 | NESTED LOOPS | | 1 | | 255 |00:00:04.47 | 547K| 45 | 45 | | | | | | 11 | NESTED LOOPS | | 1 | 1 | 255 |00:00:04.47 | 546K| 45 | 45 | | | | | | 12 | NESTED LOOPS | | 1 | 1 | 255 |00:00:03.88 | 383K| 45 | 45 | | | | | | 13 | NESTED LOOPS | | 1 | 1 | 255 |00:00:03.02 | 979 | 45 | 45 | | | | | | 14 | NESTED LOOPS | | 1 | 1 | 255 |00:00:03.01 | 712 | 45 | 45 | | | | | |* 15 | HASH JOIN | | 1 | 1 | 255 |00:00:03.01 | 527 | 45 | 45 | 858K| 858K| 1283K (0)| | | 16 | NESTED LOOPS | | 1 | 19 | 255 |00:00:00.01 | 28 | 0 | 0 | | | | | | 17 | NESTED LOOPS | | 1 | 1 | 9 |00:00:00.01 | 17 | 0 | 0 | | | | | | 18 | TABLE ACCESS BY INDEX ROWID | DOMCUST | 1 | 1 | 1 |00:00:00.01 | 2 | 0 | 0 | | | | | |* 19 | INDEX UNIQUE SCAN | PK_DOMCUST | 1 | 1 | 1 |00:00:00.01 | 1 | 0 | 0 | | | | | |* 20 | TABLE ACCESS FULL | DOMHEADER | 1 | 1 | 9 |00:00:00.01 | 15 | 0 | 0 | | | | | |* 21 | INDEX RANGE SCAN | PK_DOMLOTS | 9 | 21 | 255 |00:00:00.01 | 11 | 0 | 0 | | | | | | 22 | VIEW | VW_PTMS_LOTS | 1 | 101 | 15101 |00:00:03.05 | 499 | 45 | 45 | | | | | | 23 | SORT UNIQUE | | 1 | 101 | 15101 |00:00:03.02 | 499 | 45 | 45 | 1328K| 587K| 1180K (0)| | | 24 | UNION-ALL | | 1 | | 15101 |00:00:03.06 | 499 | 45 | 45 | | | | | | 25 | HASH GROUP BY | | 1 | 100 | 15101 |00:00:02.98 | 0 | 45 | 45 | 3004K| 982K| 3262K (1)| 1024 | |* 26 | FILTER | | 1 | 100 | 15842 |00:00:02.99 | 0 | 0 | 0 | | | | | | 27 | REMOTE | | 1 | | 16563 |00:00:02.95 | 0 | 0 | 0 | | | | | |* 28 | TABLE ACCESS FULL | PTMSLOTS | 1 | 1 | 0 |00:00:00.01 | 499 | 0 | 0 | | | | | |* 29 | INDEX UNIQUE SCAN | PK_DOMLOTS | 255 | 1 | 255 |00:00:00.01 | 185 | 0 | 0 | | | | | | 30 | TABLE ACCESS BY INDEX ROWID | DOMHEADER | 255 | 1 | 255 |00:00:00.01 | 267 | 0 | 0 | | | | | |* 31 | INDEX UNIQUE SCAN | PK_DOMHEADER | 255 | 1 | 255 |00:00:00.01 | 12 | 0 | 0 | | | | | | 32 | TABLE ACCESS BY INDEX ROWID | LOTTEST | 255 | 1 | 255 |00:00:00.91 | 383K| 0 | 0 | | | | | |* 33 | INDEX UNIQUE SCAN | PK_LOTTEST | 255 | 1 | 255 |00:00:00.91 | 382K| 0 | 0 | | | | | | 34 | SORT AGGREGATE | | 255 | 1 | 255 |00:00:00.91 | 382K| 0 | 0 | | | | | | 35 | TABLE ACCESS BY INDEX ROWID | LOTTEST | 255 | 1 | 261 |00:00:00.90 | 382K| 0 | 0 | | | | | |* 36 | INDEX RANGE SCAN | UK_LOTNO | 255 | 1 | 261 |00:00:00.90 | 382K| 0 | 0 | | | | | | 37 | SORT AGGREGATE | | 255 | 1 | 255 |00:00:00.90 | 382K| 0 | 0 | | | | | |* 38 | FILTER | | 255 | | 57880 |00:00:01.09 | 382K| 0 | 0 | | | | | |* 39 | TABLE ACCESS BY INDEX ROWID| LOTTEST | 255 | 1 | 57880 |00:00:00.97 | 382K| 0 | 0 | | | | | |* 40 | INDEX RANGE SCAN | UK_LOTNO | 255 | 45 | 767K|00:00:00.85 | 1798 | 0 | 0 | | | | | |* 41 | INDEX UNIQUE SCAN | PK_LOTTEST | 255 | 1 | 255 |00:00:00.53 | 162K| 0 | 0 | | | | | | 42 | SORT AGGREGATE | | 255 | 1 | 255 |00:00:00.53 | 162K| 0 | 0 | | | | | | 43 | TABLE ACCESS BY INDEX ROWID | LOTTEST | 255 | 1 | 264 |00:00:00.52 | 162K| 0 | 0 | | | | | |* 44 | INDEX RANGE SCAN | UK_LOTNO | 255 | 1 | 264 |00:00:00.52 | 162K| 0 | 0 | | | | | | 45 | SORT AGGREGATE | | 255 | 1 | 255 |00:00:00.52 | 162K| 0 | 0 | | | | | |* 46 | FILTER | | 255 | | 55792 |00:00:00.46 | 162K| 0 | 0 | | | | | |* 47 | TABLE ACCESS BY INDEX ROWID | LOTTEST | 255 | 1 | 55792 |00:00:00.35 | 162K| 0 | 0 | | | | | |* 48 | INDEX RANGE SCAN | UK_LOTNO | 255 | 45 | 516K|00:00:00.57 | 5282 | 0 | 0 | | | | | | 49 | TABLE ACCESS BY INDEX ROWID | LOTTEST | 255 | 1 | 255 |00:00:00.01 | 255 | 0 | 0 | | | | | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Predicate Information (identified by operation id): --------------------------------------------------- 2 - filter(:B1-365<=:B2+365) 3 - filter(("WOODTYPE"=:B1 AND "PRODDATE">=:B2-365 AND "PRODDATE"<=:B3+365)) 4 - access("LOTNO"<:B1) 6 - filter(:B1-365<=:B2+365) 7 - filter(("WOODTYPE"=:B1 AND "PRODDATE">=:B2-365 AND "PRODDATE"<=:B3+365)) 8 - access("LOTNO">=:B1) 15 - access("DOMLOTS"."LOTNO"="VW_PTMS_LOTS"."LOTID") 19 - access("DOMCUST"."DOMCUSTID"=1) 20 - filter(("DOMHEADER"."DOMCUSTID"=1 AND "DOMHEADER"."ISSUEDATE">=TO_DATE(' 2014-05-30 00:00:00', 'syyyy-mm-dd hh24:mi:ss') AND "DOMHEADER"."WOODTYPE"='H' AND TRUNC(INTERNAL_FUNCTION("DOMHEADER"."ISSUEDATE"))<=TO_DATE(' 2015-05-30 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))) 21 - access("DOMHEADER"."DOMID"="DOMLOTS"."DOMID") 26 - filter("A"."StartTime">GREATEST(SYSDATE@!-730,TO_DATE(' 2013-04-16 13:00:00', 'syyyy-mm-dd hh24:mi:ss'))) 28 - filter("PRODTIME">SYSDATE@!-730) 29 - access("DOMHEADER"."DOMID"="DOMLOTS"."DOMID" AND "DOMLOTS"."LOTNO"="DOMLOTS"."LOTNO") 31 - access("DOMLOTS"."DOMID"="DOMHEADER"."DOMID") 33 - access("A"."LOTID"=) 36 - access("LOTTEST"."LOTNO"=) 38 - filter(:B1-365<=:B2+365) 39 - filter(("WOODTYPE"=:B1 AND "PRODDATE">=:B2-365 AND "PRODDATE"<=:B3+365)) 40 - access("LOTNO"<:B1) 41 - access("B"."LOTID"=) 44 - access("LOTTEST"."LOTNO"=) 46 - filter(:B1-365<=:B2+365) 47 - filter(("WOODTYPE"=:B1 AND "PRODDATE">=:B2-365 AND "PRODDATE"<=:B3+365)) 48 - access("LOTNO">=:B1) 105 rows selected. Elapsed: 00:00:00.12
Tags: Database
Similar Questions
-
Why the alerts listed below is generated? What is the cause of this and the resolution?
1 script the replication consistency AD AD partner operations master Client-side Test database has not finished2 could not determine the FSMO role holder3. overall the status of essential Services4. all replication partners failed to replicate.5. the report of chess AD Machine account has authentication of data6. registration of DNS of essential domain controller records is failing7 AD Site Performance Health Rollup monitor8 AD Site availability health Rollup monitor9 AD domain availability health Rollup monitor10 field Performance Health Rollup monitorPlease someone help me to get the Exact details, Cause and resolution of these. These all relate to an AD alerts generated in SCOMHi Nimit Kumar,
You try to post your question here for assistance:
http://social.technet.Microsoft.com/forums/en-us/home
Thank you.
-
I chose the trial for InDesign download version and it has been downloading for 30 minutes. It normally takes too long or I did something wrong?
Clear the Temp / Tmp folder and try again
Or you can also download the direct download link:
http://prodesigntools.com/Adobe-CC-2015-direct-download-links.html
Let me know if you need help
-
My computer takes 20 minutes to start and also has a black screen
Hello world
I have a Dell Dimension 9200 and recently every time I start my computer or it reboot, it takes 20 minutes to get to the desktop and also has a black screen. This issue has occurred only recently and I don't know what is the cause and so advice would be welcome.
Other strange things include all my system restore points are missing and so I can't return the operating system to a previous date when it was working properly.
And when I did a test on the hard disk, one of the internal drives have had a "Fail" result - Code 7 back. I don't know if this was caused by a virus or is the result of a mechanical failure in the hard drive itself.
Thank you very much.
Gordon
Bev.
-
Immediately after I've upgraded to the new Firefox, it took 15 minutes to open a window. I can't even force quit it takes any active memory. None of my favorites are showing the toolbar or the menu drop down and after about 15 minutes, I get a script error is not generated by a script from Mozilla. Even after the error, I can't do anything in the window of Firefox!
Create a new profile as a test to see if your profile is the source of the problems.
See "basic troubleshooting: a new profile:
If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.
See:
See also:
-
Why my hp officejet 6500 has more printer take ten minutes to four pages of fax?
HP Officejet 6500 a Pus E710n-z series
Windows 7
Why my hp officejet 6500 has more printer take ten minutes to four pages of fax? No change has been made and no error message. This seems to be an extremely long time for only four pages!
Firmware has been day t0 then did a hard reset and tested a fax. seems to be faster, but was not a very detailed page. will be able to say when I have more pages to send. If this is no better at this moment, will post back.
-
Test system has no stand A1000-G stopped
My ZTE G-1000 entered into test mode. It shows the following message appears on the screen.
PS
Do not touch in the first 5 seconds
Touch the second 5 seconds.
ALSPS step 1 FAIL
ALSPS step 2 FAIL
Nipple Fail! System shutdown! (bottom end)
Not able to get out of this mode and also not able to tab.
Please suggest a way to solve this problem.
Thank you!!
Hello
Thanks for the reply.
I kept it running until the battery has drained. Then I plugged in the charger and the tab back. He started to work normally.
Thank you
-
Why the total time required for the test sequence is different during the test runs
Hello
-J' have different test resources to test our product which includes engines and the NOR-Box (6351).
-Number of test files in sequence that are called during the test (ca. 20)
-The problem is that when I run these test sequence files separate (say only 3 out of 20), total time by these tests are t1, t2 and t3, but when - I left all 20 tests to run without jumping all the time needed by the 3 tests above is t1 + 60 s, t2 + 80 s and t3 + 50sec. Why it is so and how can I avoid this problem.
-The tests are motors to move, take samples or box then save them on my computer after testing the limits. Since they are time critical, when I do all the running tests in a test go a lot do not PASS. I can't run them separately because it takes more time, more interference by user and also more than one report that is not desired.
-J' tried unloading after execution steps, but it did not help.
Kind regards
RB
This probably depends on that made your sequence. Have you tried shrink where extra time is being spent? You can time how long different parts of your sequence are following the steps of the expression as follows:
Locals.StartTime = Seconds()
Locals.ElapsedTime = Seconds() - Locals.starttime
You can also watch time module in your reports. There is nothing specific on TestStand that should cause some sort of slow down like this. I recommend trying to figure out where the extra time is being spent. I suspect once you do, the cause will become obvious.
-Doug
-
HP OfficeJet 7310 all-in-One slow takes 15 minutes to print the page
Why my HP OfficeJet 7310 all-in-One printer suddenly run so slow it takes 15 minutes or more to print a page? I use MacBook with OS 10.7 Lion and reinstalled the latest drivers that have been for OS Snow Leopard. How to speed this up?
Hello
If the same behavior appears in copying autonomous
Even though the USB cable is disconnected, so the computer is without impact on the device and not related to the problem
By the information provided, the problem is with your printer hardware
However, make sure that your cartridges are without impact on your printer
Make sure the expirations of ink did not both for black and color, as well, try to isolate the problem and check if cartridges it may as follows
Remove the color cartridge and try to print from the computer
Now repeat the same thing with black ink only
If the problem occurs with a specific cartridge only, replace the cartridge.
If the same behavior is displayed for either of these tests, I suggest you try a different power outlet. If there is no change yet, contact the HP call center in your area, in an attempt to reset your device.
It is our last chance, otherwise it will repair the product
-
dynamic test license fails in submitting the application
Yet another topic for dynamic license key. I think I read all and have not seen this problem before.
At this stage, we are unable to apply because the license test dynamics model fails. Test Request and Response of Test data seem to meet the requirements documented for dynamic licensing model API. You can see the POST data successfully saved in our database, and the criterion seems to return a properly formatted response.
Our test results show the following information from the portal of new applications to the Blackberry. I changed domain names and the script, but the MESSAGE and the key data are real. Good luck to find the algorithm.
Is someone can you please tell me what is the problem with the answer? The error message in the supplier portal is as follows.
Incorrect response format. Key not found
The output of test from the supplier portal is as follows.
HTTP URL for keys
http://example.com/whatever.php
Request trial
POST whatever.php HTTP/1.1
Content-Type: application/www-url-encoded
Host: example.com
[email protected]&product=youFarkle&version=1.0&TransactionID=123&test=true
Test the response of
HTTP/1.1 200 OK
Content-Type: application/www-url-encoded
Content-Length: 20
key = EF5859DAB283A56A
Any help is greatly appreciated.
Tooter
Seems good.
I would check for hidden control characters, etc..
Maybe try setting the content instead of the url encoded text type.
-
When starting my computer, the internet takes 5 minutes to get running .i think of something else is running in the background, I'm not that. then when I finnally get on the interniet, he died suddenly. This goes on all day. can someone help me find a solution. Dean of the thanks
Sorry, but clarification, hear you the browser takes a long time to start and connect, or the actual Internet connection takes a long time to set up (wireless link maybe) and dips?
What browser are you using IE9? If so, try another browser as a test as FireFox
It could be Malware so eliminate this possibility first. To update your AntiVirus and scan and then download, install, update (updated by right-clicking on its icon and 'run as administrator' then go in the
tab) and run a scan with Malwarebytes.Does this help?
-
Loading the Google's HTTPS version causes Firefox to do 3 background request every 45 seconds even after closing the page.
With any other HTTPS sites that support HTTP Strict Transport Security (HST), I noticed connection only 1 history.
How can I disable these background connections?Hello, I'm no expert on the matter, but it is quite possible that the spdy Protocol, which is used by google on its secure sites (twitter atm) and is causing the behavior that you have seen.
"SPDY connections are persistent connections. For optimal performance, it is expected that clients will not close the open connections until the user navigates away from all web pages referring to a connection, or until the server closes the connection. Servers are encouraged from the connections open as long as possible, but can stop idle connections if necessary. »
http://mbelshe.github.com/SPDY-specification/draft-mbelshe-SPDY-00.XML#RFC.section.2.1You can try to disable support for the spdy Protocol in firefox (in all: config) and see if that changes the number and length of connections to the server.
-
early 2009 iMac 2.66 processor
OS X El Capitan worm 10.11.3
249 GB available
It takes 5 minutes to start and I get a lot of time waiting pinwheel
I cleaned up google and firefox and checked for malware
How can I speed it up?
First start by going to system-> startup disk preferences and select your startup disk. Sometimes after an update OS X startup disk becomes unselected for the firmware needs to address each possible boot device, including USB, SD card, DVD, network, etc... and wait before Timeout interface moves the next possible candidate.
After that, start in safe mode
http://support.Apple.com/kb/ht1564>
This will NOT load any substance left 3rd, you have installed. Many times, it is 3rd party additions that cause problems of this kind.
You can edit the output of EtreCheck, who will analyze the someone
https://discussions.Apple.com/docs/doc-6174>
Look at the Applications-> Utilities-> Console of all frequently repeated journal entry, such as the process begins, process dies, starts, dies, starts, dies, wash, rinse, repeat also. This type of failure can go under the radar of other controls.
-
The monitoring of test data to write in the CSV file
Hi, I'm new to Labview. I have a state machine in my front that runs a series of tests. Every time I update the lights on the Panel with the State. My question is, how is the best way to follow the test data my indicators are loaded with during the test, as well as at the end of the test I can group test data in a cluster, and send it to an another VI to write my CSV file. I already have a VI who writes the CSV file, but the problem is followed by data with my indicators. It would be nice if you could just the data stored in the indicators, but I realize there is no exit node =) any ideas on the best painless approach to this?
Thank you, Rob
Yes, that's exactly what typedef are to:
Right-click on your control and select make typedef.
A new window will open with only your control inside. You can register this control and then use it everywhere. When you modify the typedef, all controls of this type will change also.
Basically, you create your own type as 'U8 numéric', 'boolean', or 'chain' except yours can be the 'cluster of all data on my front panel' type, "all the action my state machine can do," etc...
-
test of strength of dirt the program cannot start because OpenAL32.dll is missing
test of strength of dirt the program cannot start because OpenAL32.dll is missing
Hello
Did you change your computer before this problem?
You can follow the suggestions and check out them.
Method 1
Check to see if the problem exists in a clean boot state.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
a.Click Startand then click run.
b.Type msconfig and then click OK.
The System Configuration utility dialog box appears.c the general tab, click Normal Startup - load all device drivers and services, and then click OK.
d.When you are prompted, click restart to restart the computer.
Method 2
If the problem exists, you can uninstall and reinstall the program.
How to change or remove a program in Windows XP
http://support.Microsoft.com/kb/307895
Note: Make sure you have the installationd disk before you uninstall the program
See also:
How to manually remove programs from the add tool / remove programs
http://support.Microsoft.com/kb/314481
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
How to back up and restore the registry in Windows XP
Maybe you are looking for
-
problem of copy / paste into Keynote 6.6.2
Hello! somehow, it is impossible to copy and paste objects (text, shapes, images etc.) in Keynote from one slide to another, or within the existing slide. using keyboard shortcuts and menu functions do not work. just copied objects do not appear. no
-
I'm running a 2014 macbook pro i7, 16 GB ram, ssd 1 TB and after the upgrade to el capitan, I can't get a good recording out of logic. I also tried Reaper and too present the problem to a lesser degree. I tried Rolands buffer suggestion: http://www.
-
Windows Movie Maker - How to move video files already in a project
OK so I have a number of video files that have been 'imported' in Windows Movie Maker from my USB drive. Now, I did my project already and am almost complete with my film. However, is there anyway I can move the videos on my computer so I don't have
-
HP Deskjet 2050 J510: Continuous scanning
With the help of W7, Firefox 35. For some reason I cannot now continue with a scanning operation ending up with all pages in one group. Now, they must be analyzed individually. How is it possible for me to get the routine of scanning a page, removing
-
My printer Dell all-in-one said that the Active Directory domain Service is unavailable?
When I try to print the printer tells me there is no communication and that the Active Directory domain Service is not available