Test failover with physical standby

Similar Questions

• Manual failover with several Standby logical

  Hello
  
  I failed to run with two standby failover logic. The transition to the
  at the first news is successful, but when I try to sinchronize the second logical standby I
  get this error in the alert.log and the trace:
  
  SERVICE NAME:(SYS$USERS) 2011-02-21 02:05:32.644
  SESSION ID: (138.8) 2011-02-21 02:05:32.644
  The main database identifier does not match the database
  identifier associated with the standby redo log of the
  logical standby database.
  ORA-16086: standby database contains no logs available pending
  
  The scenario is llike this:
  
  Server role
  primary Leopard
  Tiger to sleep 1
  Lion to sleep 2
  
  The passage of leopard to Tiger works well. But new primary sinchronization, tiger, with
  second sleep mode, lion, breaks with the error ORA-16068.
  
  Is this possible?
  
  Thanks in advance!

  You did not provide a version number, or enough information to find out how you have configured a part any configuration.

  If the first line into two logical Standby it replicates standby who then reply standby B or both all too?

  If the primary went what mechanism is in place, the new principal to replicate to B? Expect to also replicate logic from the previous day, return to the primary origin?

  We need a lot more information to help you.

• Failover to physical standby

  Hi all

  I have a custodian of data configured in my local system. Please find the slot configuration of the data protection

  Data type of guard:-physical Standby (version Oracle 11 g)

  Service responsible for log transport:-ARCH

  No newspaper to redo the previous day:- neither primary Nor in standby mode

  I'm failing by using the command 'alter database recover managed standby database finish. "

  Please find the below info alert log after this command.

  Killed Dec 03 01:42:14 2013

  ALTER database recover managed standby database finish

  Try to perform a recovery of Terminal (PRD)

  Beginning media recovery: recovery ensures managed (PRD)

  Parallel media enabled rapid recovery

  Managed Standby recovery not using real time applies

  Media, recovery waiting for thread 1 sequence 145

  "Terminal recovery Timestamp is December 3, 2013 01:42:15.

  Terminal recovery: application standby redo logs.

  Terminal recovery: thread 1 seq # 145 again required

  Media, recovery waiting for thread 1 sequence 145

  Terminal recovery: allowance end Redo log

  Recovery Terminal: waiting for redo logfile created 3 ' / data/PRD_DR/arch/arch_1_0_831359165.arch'

  This waiting for redo log file is created as part of the recovery

  operation.  This waiting for redo log file should be deleted after the

  transition to a primary operation complete.

  Recovery Media Log /data/PRD_DR/arch/arch_1_0_831359165.arch

  Terminal retrieval: newspaper 3 reserved for thread 1 sequence 145

  Online Redo Log recovery: thread 1 mem Group 3 Seq 145 reading 0

  Mem # 0: /data/PRD_DR/arch/arch_1_0_831359165.arch

  Identified end-of-Redo for thread 1 sequence 145

  Incomplete recovery applied all redo them ever generated.

  Change recovery completed by 559773 23/11/2013 time 13:38:13

  Recovery media Complete (PRD)

  Terminal recovery: success of

  Activation reset sleep ID 1895332757 (0x70f87b95)

  Completed: alter database recover managed standby database finish

  Killed Dec 03 01:42:50 2013

  change the database for validation at the crossing elementary school

  ALTER DATABASE TRANSITION TO PRIMARY SCHOOL (PRD)

  Waiting for the transition from role maximum is 15 minutes.

  Backup controlfile written to trace the file /apps/oracle/diag/rdbms/stand/PRD/trace/PRD_ora_9466.trc

  tkcrrxms: kill 3 process (all the RFS)

  Terminal standby recovery start SCN: 559772

  RESETLOGS after complete through change 559773

  Log in/data/PRD_DR/REDOLOG11 line. JOURNAL: Thread 1 Group 1 had been previously authorized

  Log in/data/PRD_DR/REDOLOG21 line. JOURNAL: Thread 1 group 2 was previously disabled

  Standby became primary YVERT: 559771

  Killed Dec 03 01:42:53 2013

  Here, my question is, why oracle implicitly creates a newspaper waiting redo pending data base for the realization of "alter database recover managed standby database finish".

  Thank you

  Like to, its due to the following bug.

  Bug 5889025 : FINISHING SWITCH GENERATES INCORRECT STANDBY REDO LOG.

  This bug refers to version 9i and standby redo logs/realtime concept is not available.

  OP using the 11g version...  Although if you see in the State of the article, the State is "92 - closed, not a Bug", according to me this is the default behavior and is not bug.

• Log_archive_format with physical standby

  Oracle RDBMS: 11.2.0.2 (RAC) on RHEL 5.6
  
  
  We need to define any particular value for log_archive_format parameter when creating physical database from the night before?
  
  In our primary, the value of the parameter is log_archive_format = 't_ % s_ % r.dbf % '. Do we need to change it to another value or can leave us like this for the physics of the standby database?
  
  Number of documents online in various blogs include log_archive_format ='% t_ % s_ % r.arc as well as all the other required parameters for the physical creation of the standby database. I am bit confused, can someone please clarify.
  
  
  Thank you

  Hello;

  Do we need to set any particular value for log_archive_format parameter while creating physical standby database?
  

  N °

  In our primary the parameter value is log_archive_format='% t_% s_% r.dbf'. Do we need to change it to a different value or can we leave it like that for physical standby database?
  

  I love them the same thing only it gaps check more easily. Yours seems to be the default for Linux.

  SQL> show parameter log_archive_format
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  log_archive_format                   string      %t_%s_%r.dbf
  SQL> 
  

  On all mine, I don't put that and allow you to apply the default value for the parameter.

  Best regards

  mseberg

• Testing failover with VMware vCenter / SRM and SQL on protected volume.

  OK, MRS. works well in test mode, although we would like to test a failover / then backspace over the weekend...

  We run SQL 2012 on a virtual machine as well as vCenter/SRM on another virtual machine, both on the protected volumes.

  If the failover stops all VM, makes a new replication then turns on the virtual machine on the DR site, it would fail because we had SQL and SRM on a protected volume?  I can understand moving protected site vCenter / SRM VM to another volume, but SQL Server is also used for other data bases we want protected.  My guess is that MRS is not smart enough to not stop SQL server last.  What should do?  What is everybody doing?

  Thanks in advance.

  You need a RS and SRMDB on both sites. The SRM on the site of DR will manage the entire process and not the vcenter/srm on the production site.

  BTW. a Microsoft SQL Server 2008 Express (R2 SP1) - 64-bit is supportet to SRMDB. Check partnerweb.vmware.com/.../interop_matrix.php

  Kind regards

  Joerg

• Test of physical Standby DB 11 g

  Hi all

  My company is considering a DR test in a few months, and since I never did this until I was wondering what would be the best way to go on the DB pending tests. This is a database of 11G (11.2.0.3). I read the following articles:

  http://gavinsoorma.com/2009/09/11g-snapshot-standby-for-real-time-testing/

  http://www.Pythian.com/blog/testing-a-physical-standby-database-in-Oracle-10G/

  http://www.Oracle.com/technetwork/articles/SQL/11g-DataGuard-083323.html

  From what I can tell the snapshot method is the easiest. My main question is when the primary method still must send the archive logs to the waiting or can I defer only to archive log shipping? How we test normally the site of DR is completely disconnect the network connections and put everything in place for the primary will not be able to speak to the waiting and vice versa. Or is the best method to follow the other article that speaks using the flashback database?

  Thanks in advance for your help.

  From what I can tell the snapshot method is the easiest. My main question is when the primary method still must send the archive logs to the waiting or can I defer only to archive log shipping?

  Are you in 11g, yes instant is a nice feature to test your intelligence. If you enable the destination, there is no problem. Meanwhile if too many records are generated and then it takes a long time to get a site to DR.

  How we test normally the site of DR is completely disconnect the network connections and put everything in place for the primary will not be able to speak to the waiting and vice versa

  You can also completely disconnect the primary DR and tests after the conversion of the physics on the eve of the snapshot if it is your condition to do so.

  Or is the best method to follow the other article that speaks using the flashback database?

  In traditional flashback, you will need to take care just like the creation of restore point with guarantee, mode standby manually and run again then flashback to the restore point. Snapshot is really simple and easy to use. If am in your position of course I use the standby database snapshot.

• Problem creating physical standby with RMAN

  Hi guru

  Perhaps this impact that all face you when creating physical standby DB. I'm trying to create a physical standby database Using RMAN double order a server

  (pri machine) machine on standby.

  Here are the steps I followed to create the above:

  Step 1:-activate forced logging

  SQL > ALTER DATABASE FORCE LOGGING;

  Step 2:-set up a standby Redo Log

  SQL > ALTER DATABASE ADD STANDBY LOGFILE GROUP 10

  2 > ('/ oracle/dbs/log1c.rdo','/oracle/dbs/log2c.rdo') SIZE 500 M;

  Step 3:-set the parameters of primary database initialization

  SQL > create pfile='?/dbs/pfileorcl.ora' of spfile;

  Edit the pfile to add the sleep settings, shown here:

  db_unique_name = "orcl".

  LOG_ARCHIVE_CONFIG = 'DG_CONFIG = (ORCL, orcldr)'

  LOG_ARCHIVE_DEST_2 = "SERVICE = orcldr LGWR ASYNC VALID_FOR =(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME = orcldr'"

  * .fal_server = orcldr

  * .fal_client = orcl

  * .standby_file_management = auto

  Step 4:-activate archiving

  SQL > SHUTDOWN IMMEDIATE;

  SQL > STARTUP MOUNT;

  SQL > ALTER DATABASE ARCHIVELOG;

  SQL > ALTER DATABASE OPEN;

  Step 5:-tnsnames for eve of the configuration database

  This should be done on the primary database to edit tnsnames.ora or using the command NetCA and create by the name orcldr

  orcldr =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = Eve-svr)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcldr)

  )

  )

  Step 6:-backup of database and copy it to standby mode

  This backup script must be run on primary and copied to sleep on the same mount point, run these scripts with RMAN, all files in /rman_backup need to be copied in /rman_backup on the standby server.

  $rman target.

  RMAN > run

  {

  allocate channel c1 type disk;

  allocate channel c2 type disk;

  backup of database format ' / rman_backup/%U';

  ARCHIVELOG backup all the format ' / rman_backup %U ';

  backup current controlfile to Eve format ' / rman_backup/%U';

  }

  Step 7:-availability of measures database

  Installation of Oracle software

  This should be the same version and patch group with exactly same ORACLE_HOME mount point.

  Commissioning of the listener

  Create and start a listener on the database of sleep by using NetCA, or create listener.ora in $ORACLE_HOME/network/admin

  LISTENER =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = Eve-svr)(PORT = 1521))

  )

  Step 8:-set of backup database initialization parameters

  Copy the pfile file created in the database primary it renames in initorcldr.ora and change these settings:

  db_unique_name = "orcldr".

  LOG_ARCHIVE_CONFIG = 'DG_CONFIG = (orcldr, ORCL)'

  LOG_ARCHIVE_DEST_2 = "SERVICE = orcl LGWR ASYNC VALID_FOR =(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME = orcl'"

  * .fal_server = orcl

  * .fal_client = orcldr

  *. LOG_ARCHIVE_DEST_STATE_2 = 'ENABLE '.

  Step 9:-installation tnsnames for the primary database

  This should be done on the pending change tnsnames.ora or using the command NetCA database and create it in the name orcl

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = primary-svr)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcl)

  )

  )

  Step 10:-copy a password file

  A password file must be created on the primary and copied to the standby site. The sys password must be the same on both sites. Copy orapworcl in $ORACLE_HOME/dbs and rename the file in orapworcldr

  Step 11:-create for Oracle mount points

  Mount point must be created on the standby server with the same convention used in primary education, which includes the location for controlfiles, redo logs, data files, destination of the newspaper Archives and alert logs.

  $ mkdir Pei/u01/app/oracle/oradata/orcl /.

  $ mkdir Pei/u01/app/oracle/flash_recovery_area /.

  $ mkdir Pei/u01/app/oracle/admin/orcl/adump

  $ mkdir Pei/u01/app/oracle/admin/orcl/bdump

  $ mkdir Pei/u01/app/oracle/admin/orcl/cdump

  $ mkdir Pei/u01/app/oracle/admin/orcl/udump

  Step 12:-use RMAN to restore the backup and standby configuration

  Connecting to RMAN and run the following command to create the database pending, this must be performed on the standby server after the backup copy and the tnsnames parameter.

  $ export ORACLE_SID = orcldr

  $ rman target sys/tiger@orcl auxiliary sys/tiger@orcldr

  RMAN > target double standby database dorecover;

  Here, I'm getting problem such as:

  While he was trying to connect to databases traget and auxiliary, I noticed that when RMAN is connected across the two databases it shows

  ORCL (DBID xyz)

  ORCL (unmounted)

  Here, in my opinion the second database must be the name of the standby database or auxiiary db name is Eve db which is orcldr in my case

  After this issue, I am faced with the second issues such as:

  in command

  target double standby database dorecover;

  After you change the command to

  RMAN > duplicate target database "sleep."

  RMAN-05520 database name mismatch

  Can u please let me know where I can be wrong

  Finally I have the problem after all this googling and thinking the same thing.

  Thanks to you all

• How to check if physical Standby is in phase with the primary

  Hi all
  
  I'm new in Data Guard. In our current production, my boss asked me to write a shell scripts for monitoring physical standby and archive primary's sync (gap of archive)
  
  I refer metalink [861595.1 ID], but when I ran the first query to the primary node, the screen lock.
  
  On primary
  ========
  
  SQL > SELECT THREAD # "Thread", SEQUENCE # 'last generated sequence.
  V $ ARCHIVED_LOG
  WHERE (THREAD #, FIRST_TIME) IN (SELECT THREAD #, MAX (FIRST_TIME) FROM V$ ARCHIVED_LOG GROUP BY THREAD #)
  ORDER BY 1;
  
  I tried to turn on 10046 trace SQL, SQL consume a lot of CPU and it full table scan in X table KCCAL $.
  
  Eye of TKPROF result as below:

  call     count       cpu    elapsed       disk      query    current        rows
  ------- ------  -------- ---------- ---------- ---------- ----------  ----------
  Parse        1      0.00       0.00          0          0          0           0
  Execute      1      0.00       0.00          0          0          0           0
  Fetch        1     88.29     115.59          0          0          0           0
  ------- ------  -------- ---------- ---------- ---------- ----------  ----------
  total        3     88.30     115.60          0          0          0           0
  
  Misses in library cache during parse: 1
  Misses in library cache during execute: 1 Optimizer mode: ALL_ROWS Parsing user id: 80  
  
  Rows     Row Source Operation
  -------  ---------------------------------------------------
        0  SORT ORDER BY (cr=0 pr=0 pw=0 time=21 us)
        0   FILTER  (cr=0 pr=0 pw=0 time=19 us)
     1124    FIXED TABLE FULL X$KCCAL (cr=0 pr=0 pw=0 time=40537 us)
        0    FILTER  (cr=0 pr=0 pw=0 time=115538625 us)
     1122     HASH GROUP BY (cr=0 pr=0 pw=0 time=115530193 us)
  7465972      FIXED TABLE FULL X$KCCAL (cr=0 pr=0 pw=0 time=94648975 us)
  
  Elapsed times include waiting on following events:
    Event waited on                        Times   Max. Wait  Total Waited
    -----------------------------------   Waited  ----------  ------------
    SQL*Net message to client               1        0.00          0.00
    control file sequential read        16841        0.05         30.88
    SQL*Net break/reset to client           1        0.00          0.00

  Because of this is the production environment, so I had put an end to the session, anyone can teach me or share with me the physical monitor in standby mode scripts is sync with primary or not? Or you encounter the above problem when you run the SQL code?
  
  My version of db is Oracle 11.2.0.1.0
  
  
  Thanks in advance.
  
  Kind regards
  Klnghau

  Just be aware that these queries are queries controlfile and if they run too long can get in the road of the database as they hold controlfile locks. You'd better watch the view v$ dataguard_stats the day before and look at the GAL apply and transport.

  We are also a few scripts in our book - http://www.amazon.com/Oracle-Guard-Handbook-Osborne-ORACLE/dp/0071621113

  Larry

• Problem with data hold creating a Physical Standby Database turorial

  There is a tutorial for creating a Data Guard Physical Standby Database:
  http://www.Oracle.com/technology/OBE/11gr1_db/HA/DataGuard/physstby/physstdby.htm
  
  I tried to install it on two servers. One for a primary database (deuxieme for the physical standby.
  I have the error on creating C. the database of watch on the #6 action network:
  
  «On the rescue system, set the ORACLE_SID to your < SID physical standby > environment variable (i.e. orclsby1) and start the instance in NOMOUNT mode with the text initialization parameter file.»
  
  When I try to connect to the instance that is idle, there is an error pops up:
  
  C:\ > sqlplus / as sysdba
  
  SQL * more: version 11.1.0.7.0 - Production Thursday, May 21, 16:28:10 2009
  
  Copyright (c) 1982, 2008, Oracle. All rights reserved.
  
  ERROR:
  ORA-12560: TNS:protocol adapter error
  
  I ' v checked listener, and it is managed. There is no database service because there is still no database.
  
  The question is did some data installed a guard configuration using this tutorial? Are there errors in there? What should I do to complete the installation?

  On Windhose for any service must have been created using the oradim command.
  Oracle tutorials are usually centered on Unix, because Windhose is an odd man out, so they do not discuss.
  "Please do the needful" and create the service before the beginning of the instance in nomount mode

  Tip: oradim is documented and has a help = clause of y.

  IIRC there is an option in control database (in the part of the interview) that automates everything.

  ----------------
  Sybrand Bakker
  Senior Oracle DBA

  Experts: those who read documentation

• Waiting for redo log file missing when restore main database using RMAN backup that was taken on the database physical standby

  Here's my question after tons of research and test without have the right solutions.

  Target:

  (1) I have a 12.1.0.2 database unique main enterprise 'testdb' as database instance running on the server "node1".

  (2) I created physical standby database "stbydb" on the server "node2".

  (3) DataGuard running on the mode of MaxAvailability (SYNC) with roll forward in real time 12 default c apply.

  (4) primary database has 3 groups of one-man redo. (/oraredo/testdb/redo01.log redo02.log redo03.log)

  (5) I've created 4 standby redo logfiles (/oraredo/testdb/stby01.log stby02.log stby03.log stby04.log)

  (6) I do RMAN backup (database and archivelog) on the site of relief only.

  (7) I want to use this backup for full restore of the database on the primary database.

  He is a DR test to simulate the scenario that has lost every primary & Eve total servers.

  Here is how to save, on the database pending:

  (1) performance 'alter database recover managed standby database Cancel' to ensure that compatible data files

  (2) RMAN > backup database;

  (3) RMAN > backup archivelog all;

  I got elements of backup and copied to primary db Server something like:

  /Home/Oracle/backupset/o1_mf_nnndf_TAG20151002T133329_c0xq099p_.BKP (data files)

  /Home/Oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.BKP (spfile & controlfile)

  /Home/Oracle/backupset/o1_mf_annnn_TAG20151002T133357_c0xq15xf_.BKP (archivelogs)

  So here's how to restore, on the main site:

  I clean all the files (data files, controlfiles oder all gone).

  (1) restore spfile from pfile

  RMAN > startup nomount

  RMAN > restore spfile from pfile ' / home/oracle/pfile.txt' to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  (2) modify pfile to convert to db primary content. pFile shows below

  *.audit_file_dest='/opt/Oracle/DB/admin/testdb/adump '

  * .audit_trail = "db".

  * full = '12.1.0.2.0'

  *.control_files='/oradata/testdb/control01.ctl','/orafra/testdb/control02.ctl'

  * .db_block_size = 8192

  * .db_domain = "

  *.db_file_name_convert='/testdb/','/testdb /'

  * .db_name = "testdb".

  * .db_recovery_file_dest ='/ orafra'

  * .db_recovery_file_dest_size = 10737418240

  * .db_unique_name = "testdb".

  *.diagnostic_dest='/opt/Oracle/DB '

  * .fal_server = "stbydb".

  * .log_archive_config = 'dg_config = (testdb, stbydb)'

  * .log_archive_dest_2 = "service = stbydb SYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = stbydb'"

  * .log_archive_dest_state_2 = 'ENABLE '.

  *.log_file_name_convert='/testdb/','/testdb /'

  * .memory_target = 1800 m

  * .open_cursors = 300

  * runoff = 300

  * .remote_login_passwordfile = "EXCLUSIVE."

  * .standby_file_management = "AUTO".

  * .undo_tablespace = "UNDOTBS1.

  (3) restart db with updated file pfile

  SQLPLUS > create spfile from pfile='/home/oracle/pfile.txt'

  SQLPLUS > the judgment

  SQLPLUS > startup nomount

  (4) restore controlfile

  RMAN > restore primary controlfile to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  RMAN > change the editing of the database

  (5) all elements of backup catalog

  RMAN > catalog starts by ' / home/oracle/backupset / '.

  (6) restore and recover the database

  RMAN > restore database;

  RMAN > recover database until the SNA XXXXXX; (this YVERT is the maximum in archivelog backups that extends beyond the scn of the backup of the data file)

  (7) open resetlogs

  RMAN > alter database open resetlogs;

  Everything seems perfect, except one of the file log roll forward pending is not generated

  SQL > select * from v$ standby_log;

  ERROR:

  ORA-00308: cannot open archived log ' / oraredo/testdb/stby01.log'

  ORA-27037: unable to get file status

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3

  no selected line

  I intended to use the same backup to restore primary basic & helps record traffic and the downtime between them in the world of real output.

  So I have exactly the same steps (except STANDBY restore CONTROLFILE and not recover after database restore) to restore the database pending.

  And I got the same missing log file.

  The problem is:

  (1) complete alert.log filled with this error, not the concern here

  (2) now repeat it in real time apply won't work since the Party shall LGWR shows always "WAITING_FOR_LOG."

  (3) I can't delete and re-create this log file

  Then I tried several and found:

  The missing standby logfile was still 'ACTIVE' at present RMAN backup was made.

  For example, on db standby, under Group #4 (stby01.log) would be lost after the restoration.

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 19 ACTIVE 133632

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  So until I take the backup, I tried on the primary database:

  SQL > alter system set log_archive_dest_state_2 = delay;

  This was the Group of standby_log side Eve #4 was released:

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 0 0 UNASSIGNED

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  Then, the backup has been restored correctly without missing standby logfile.

  However, to change this primary database means break DataGuard protection when you perform the backup. It's not accept on the production environment.

  Finally, my real questions come:

  (1) what I do may not do on parameter change?

  (2) I know I can re-create the control file to redo before delete and then recreate after. Is there any simple/fast to avoid the standby logfile lost or recreate the lost one?

  I understand that there are a number of ways to circumvent this. Something to keep a copy of the log file waiting restoration progress and copy up one missing, etc, etc...

  And yes I always have done no real-time applies "to the aid of archived logfile" but is also not accept mode of protection of production.

  I just want proof that the design (which is displayed in a few oracle doc Doc ID 602299.1 is one of those) that backs up data backup works effectively and can be used to restore the two site. And it may be without spending more time to resume backups or put the load on the primary database to create the database before.

  Your idea is very much appreciated.

  Thank you!

  Hello

  1--> when I take via RMAN backup, RMAN does not redo log (ORL or SRL) file, so we cannot expect ORLs or SRL would be restored.

  2nd--> when we opened the ORL database should be deleted and created

  3rd--> Expecting, SRL should not be an issue.we should be able to do away with the fall.

  DR sys@cdb01 SQL > select THREAD #, SEQUENCE #, GROUP #, STATUS from v$ standby_log;

  THREAD # SEQUENCE # GROUP # STATUS

  ---------- ---------- ---------- ----------

  1 233 4 ACTIVE

  1 238 5 ACTIVE

  DR sys@cdb01 SQL > select * from v$ logfile;

  GROUP # STATUS TYPE MEMBER IS_ CON_ID

  ---------- ------- ------- ------------------------------ --- ----------

  3 /u03/cdb01/cdb01/redo03.log no. 0 online

  /U03/cdb01/cdb01/redo02.log no. 0 2 online

  1 /u03/cdb01/cdb01/redo01.log no. 0 online

  4 /u03/cdb01/cdb01/stdredo01.log WATCH No. 0

  /U03/cdb01/cdb01/stdredo02.log EVE 5 No. 0

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  method: cannot access the /u03/cdb01/cdb01/stdredo01.log: no such file or directory

  DR sys@cdb01 SQL >! ls - ltr /u03/cdb01/cdb01/stdredo02.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:32 /u03/cdb01/cdb01/stdredo02.log

  DR sys@cdb01 SQL > alter database force claire logfile 4;

  change the database group claire logfile 4

  *

  ERROR on line 1:

  ORA-01156: recovery or current flashback may need access to files

  DR sys@cdb01 SQL > alter database recover managed standby database cancel;

  Database altered.

  DR sys@cdb01 SQL > change the database group claire logfile 4;

  Database altered.

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:33 /u03/cdb01/cdb01/stdredo01.log

  DR sys@cdb01 SQL >

  If you do, you can recreate the controlfile without waiting for redo log entry...

  If you still think it's something is not acceptable, you must have SR with support to analyze why he does not abandon SRL when controlfile_type is "underway".

  Thank you

• Primary RAC physical standby

  Hi all

  We plan to set up physics in waiting for our CARS database. Can anyone let us know how config in the case of RAC database? Also after you set up the night before with the protection mode max is possible to change physical Snapshot standby standby for our app objective test team?

  RDS,

  Varun

  Hi Varun,

  I recently put in place an environment of two RAC nodes to a custodian of data environment is only a single node. Nothing very special when configuring Data Guard in a CCR environment. The most important thing is that each RAC instance must send waiting for BD archivers.

  This setting is configured the destination archive database pending.

  Once the archivers reach the Data Guard environment are applied correctly and consistently to the comics of the day before.

  You have this MOS score that helps the creative process.

  Create a sleep using RMAN Duplicate (RAC or Non-RAC) (Doc ID 1617946.1)

  Yes, you can convert the Standby database to a snapshot of BD, are supported read/write operations.

  Use the command alter database convert on the eve of the snapshot;

  And when people apps to complete the test, convert it to sleep with the command:

  ALTER database convert physical standby;

  And the standby for the role of sleep and if you turn on the AutoRecover apply all redo it in anticipation of is to apply because you put the backup database into the snapshot mode.

  Is very powerful and easy.

  I hope to help.

  Best regards

  Arturo

• Reader only a physical standby Clock Data Guard?

  Hi all

  We try to use TimesTen 11.2.2.4.1 as a memory cache read-only for a 11.2.3.0.7 on Linus RedHat 6.3 Oracle schema, all using Oracle Data Guard to replicate the Oracle instance through geographically remote sites. At each site, we would like to have two instances of TT, synchronization with the local instance of Oracle 11 g. It works very well against the master DB, but TT agents will be able to synchronize against physical standby instances?

  The problem, seems, is that the agent of TT uses structures dedicated in the master Oracle (related to the grid of cache), instance that will be replicated to instances of Eve. Is TT agent able to use the read-only, structures to complete replication synchronization, or is this unworkable approach? What would be your advisor as a way to do this?

  Thanks for your help,

  Chris

  No, I'm afraid that will not work and is not supported. We support the use of groups of READONLY and AWT cache in collaboration with Data Guard in the following configuration (documented in the Guide of Cache TimesTen IMDB):

  1 data Guard is configured as synchronous physical standby

  2. all the caches of TT run against Oracle DB

  3. in the event of a failover of Data Guard, TT hiding can be migrated to run against the DB who now has beed promoted active to standby

  It is the only supported configuration.

  Kind regards

  Chris

• Physical standby Archive newspapers vs

  Hi all

  11 GR 2

  Rhel6.5

  I'm confused how archivelogs be appied physical standby.

  CASES1:

  Assuming I backup my primary Db with RMAN full backup now.,

  then question crosscheck backup and delete obsolete. It will remove all archivelogs not yet taken to the waiting?

  CASE2:

  Right now my database pending is on a mode "real apply", so updates to the primary level is done directly on the eve as well, even if the archive logs have not yet carried.

  Assuming that I will delete archive records at the primary level, such that it cannot carry, will be the sleep EEG 'gaps' in its Archives logs status?

  Your comments are appreciated hightly.

  Thank you very much

  JC

  Read in the mseberg response:

  A way to remove applied log file stored in the backup database

  How to ensure that RMAN is NOT delete archived logs that have not yet shipped to standby [394261.1 ID]

  Kind regards

  Juan M

• DataGuard (activate a physical standby as a stand-alone database database)?

  Hi all

  Can I please ask advice on how it would activate a physical database ensures for 11.2.0.4?

  Note - I do not want to return the "standby" to watch again...

  Note 1 – I don't have (and don't use flashback technology to do this) - so I can't use a watch "snapshot"...

  Note 2 - the 'primary' current cannot be touched.

  Something like below?

  Repeat stop applies to pending

  SQL > alter database recover managed standby database cancel;

  Stop redo pending transaction logs.

  PRIMARY

  SQL > ALTER SYSTEM SET LOG_ARCHIVE_DEST_STATE_2 = DELAY;

  Activate and open the database physical sleep.

  Physical STANDBY

  SQL > ALTER DATABASE ENABLE PENDING DATA base;

  SQL > STARTUP MOUNT FORCE;

  SQL > alter database base_de_donnees ensures together to improve performance;

  SQL > ALTER DATABASE OPEN;

  Concerning

  It wouldn't affect Production (primary). It's just the steps of failover.

  The same applies to the role transition, but in a role transition, you must first pass at the primary level of Eve and the day before, you must run the digital switchover to make primary.

  You could refer to this https://docs.oracle.com/cd/E11882_01/server.112/e41134/role_management.htm#SBYDB4769 you would get to the difference of the steps for the passage and failover.

  -Jonathan Rolland

• Block corruption on the physical Standby database

  Hi all

  Operating system: HP Unix

  DB: 10.2.0.4

  We are facing corruption block on our database of physical intelligence. The same has been detected using commands below and several blocks were found to be corrupt.

  RMAN > backup validate check the logic of database;

  SQL > select * from v$ database_block_corruption

  As it is a basic data watch no backup is present, pulling the command below did not help

  RMAN > list of corruption block restoration;

  I think taking the incremental backup of the PR and the same application on DR, y at - it another way to eliminate corruption said?

  Kind regards

  Sphinx

  You can check below link if corruption block results nologging, there is a thread already with the question.

  Block corruption on the standby database

  10.5.2 steps of recovery for databases physical standby

  Data protection scenarios