test file exists on the file system?

Similar Questions

• Panel Test DAQ opened on the remote system

  Using the command-line tool nidmfpan.exe you open a test panel to a device on your system by specifying its name.  Here is an article which he described.

  http://digital.NI.com/public.nsf/allkb/9B628A8B1B13136F86256DDB0004DE4D

  But what is not mentioned is how to call this function if it will open a panel of test on a RT system.  This is possible because in MAX, you can select the hardware and the same test panel is displayed, but I don't know the right way to call this EXE, so it will open it.  Is there any place that command line switches are documented for this program?  And what is the method for opening a panel of test on a piece of DAQ hardware on a remote system?  Thank you.

  Since nobody has been able to help me I thought about it myself.  If you call the application nidmfpan.exe with the command line switch send_break_action: with the IP address of the remote system it works great.  I also found you can use the/dev: instead of the /devid: to specify the device by a unique identifier instead of the alias MAX.  Thus, for example:

  C:\Windows\SysWOW64\nidmfpan.exe /host:192.168.129.1/dev: {84535FB2-8F2A-11E6-8061-00802F25AF78}

  Or

  C:\Windows\SysWOW64\nidmfpan.exe /host:192.168.129.1 /devid:cDAQ1Mod2

• Windows XP. The system power finished on the computer self-test now booting of the operating system

  When booting from XP PRO I get this audible, ' system completed power on self test.» Computer, now the startup of the operating system. ». How can I disable this audible?

  1. turn off your PC
  2. start your PC
  3. press the DEL key (or whatever key allows you to access your BIOS) on your keyboard while it is booting (it has a message when, but no matter.
  4. you are now inside the BIOS
  5. go to the Advanced tab, then configuration of device e/s-which is the way down
  6. go to the POST Reporter speech, click Enter, and then turn it.
  7 does.

• CS2 & CS4 Extended on the same system

  I downloaded the CS4 Extended trial but do not uninstall CS2 before that. These two cannot exist on the same system without problems?

  Thank you!

  Yes. I have Photoshop 2.5.1 6 PS, PS 7, CS, CS2, CS3, CS4 all play nice together on the same machine.

• The key of the MA is not configured properly or is corrupted in the file system and s doe does not exist in the repository of management.

  I get this error and is it possible to solve this problem without re-creating the service/s once again, etc. Just curious, if you have suggestions/steps I may have missed or I'll drop and recreate new services

  In any case, I have a backup of the emkey.ora and place it in the sysman/config directory, but still does not work... Please see below...

  C:\Documents and Settings\abigail > emctl status emkey

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of the MA is not configured properly or is corrupted in the file system and the DOE

  s does not exist in the repository of management. To correct the problem:

  (1) (copy the emkey.ora another WHO file or backup machine OH/sysman/c

  onfig directory.

  (2) configure the emkey.ora file by running ' emctl config emkey - emkeyfile < emkey.

  ".ora file location >.

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of Em is already configured. To override the current configuration, run "em".

  CTL emkey < options > config - force. "

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config-force - sysman_pwd *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  The key of the MA could not be configured. Cannot access the file E:\app\abigail\product

  \11.2.0\dbhome_1\sysman\config.

  C:\Documents and Settings\abigail > emctl dbconsole sysman_pwd secure *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  http://Abigail:5501 / console/em/aboutApplication

  DBCONSOLE already stopped...   Fact.

  Officer is arrested...   Fact.

  Dbconsole fixing...   Has begun.

  Please enter repository schema password:

  Dbconsole fixing...   Failed.

  EMKey is misconfigured.

  Sorry but I have to ignore your suggestion and don't worry how I spend my time

  AND OHMYGODD IT WORKSS! For later use, this is how I solved it based on my research, in fact based on a particular search:

  http://franjv.blogspot.com/2013/08/eMKey-problems-in-Oracle-RAC-11gr2.html

  Thank you the one who wrote this and... is it the same "Fran" who helped me last time? Coincidence?

  In any case, thanks

• -A file association problem exist, which prevents the file you are trying to download from being associated with the correct application of the operating system using the windows 7 IE 11

  --	Is a file association problem, which prevents the file you are trying to download from being associated with the correct application of the operating system

  IN USING THE WINDOW 7 IE 11 HOW CAN I FIX IT?

  Try to download the installation offline programs:

  • Adobe Reader
  • Flash Player for Internet Exporer - ActiveX
  • Flash Player for Firefox - NPAPI

• Access to the file system for Extraction and load testing

  Hello
  
  I did a study with me the different techniques of Extraction and load using Oracle database as a source for the extractions and targets for loads.
  
  I would like to run the same tests on my test service to compare the run times.
  
  To do this, I need my schema to be able to write files and read them as external tables.
  
  I didn't need to download files, I can create using the UTL_FILE utility that comes with the Oracle database.
  
  My test service will include limited access to a directory read / write flat files?
  
  Thanks in advance,
  Stew of Ashton

  Stew,

  The cloud of Oracle does not support external tables, nor access to the OS files (utl_file etc.). Only, you have sftp and download access via Apex or SQL Developer to load or import data. Someday, there may be a place to store files in the cloud, but I don't know the details of this.

• LCM - artifact of import to the file system without using a source application

  Hi all

  I would like to ask if I can import the objects in the file system in SSP without the source application, I have the source file: XML (which contains the resources folder: configuration, type of plan, artifacts global relational "Data.xml") and record information: registration, sourceinfo.xml) which was taken from an application that no longer exists!

  How could we do?

  Thanks in advance

  Kind regards

  1003344 wrote:

  Thank you for your reply, I tried to put the folder under what but I can't see them yet! I also tried tried to put the. XML directly under what files but I still don't see the sub file system

  do I need to restart the server?

  Kind regards

  If you put the files and the folder structure in place then there is no need to restart and it should pick it up, if the structure is incorrect, so he will not pick it up, might be interesting to try an export of test on a different application or a system to get an idea of what files you need.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Cf11 VFS error: The Global memory limit 1000 MB for virtual file system in memory exceeded.

  Greetings,

  I have a new standard CF11 installation on Windows 8 server x 64

  16 GB of ram

  Parameters to the JVM:

  -serveur - Xmn1024m-Xss1024k - XX : PermSize = 256 m - XX : MaxPermSize = 2048 m - XX : + UseParallelGC - Xbatch-Dcoldfusion.home={application.home}-Duser.language=en-Dcoldfusion.rootDir={application.home}-Dcoldfusion.libPath={application.home}/lib-Dorg.apache.coyote.USE_CUSTOM_STATUS_MSG_IN_HEADER=true-Dcoldfusion.jsafe.defaultalgo=FIPS186Random

  Min heap: 2048 mb, Max 6144 mb

  Parameters of VFS:

  VFS global memory limit: 1000 MB

  Memory per request of VFS limit: 400 MB

  
  

  CF is currently 1.7 GB of ram

  
  

  I have a 6 applications on this server. 1 use the VFS.

  The others are applications simple cfm that have NOTHING to do with the VFS system.

  
  

  I have a scheduled task that calls simple cfm pages to update the tables in our database. During her run of these tasks, I get an email from the overall error (which I have the installer if there is an error in CF) and most of the error is
  

  Browser	CFSCHEDULE
  DateTime	{ts ' 2014-08-16 15:07 '}
  Diagnosis	The overall memory limit 1000 MB for virtual file system in memory exceeded. < br > increase memory VFS limit in the ColdFusion administrator. < br / > the error occurred on line 17.
  GeneratedContent	[empty string]
  HTTPReferer	[empty string]
  Mailto	[empty string]
  Message	The overall memory limit 1000 MB for virtual file system in memory exceeded.

  QueryString

  [empty string]

  RemoteAddress

  xxx.xxx.xxx.xxx

  I have a utility I can run to show all files in the VFS. and there are currently a total of 8 cfm files that comprise 4064 KB of space in the VFS.

  The 1 application that actually uses the VFS has several functions. Which essentially writes the CFM files includes the MTC as a contained variable and returns the variable.

  Under CF9 we also remove disk ram CFM files after their inclusion. But under CF11 it fails with an error indicating that the modification date is not found. I removed from the part of the file delete and the system works but we get this error of memory with the VFS.

  Can someone shed some light on this for me?

  It's not since.

  Thank you

  
  

  
  

  
  

  
  

  
  

  I'm sorry to tell someone else that my find this question, I could not solve it.

  Thanks for all your great suggestions and help in the BK.

  We are just past the entire system to the hard drive. This will eventually hurt us in the end, but at this point we don't have an option, our system has been down since the day wherever we improved to CF11. We did a lot of testing before the migration of load and our tests, it worked. But there were many problems with the IIS connectors and we also installed new memory. There has been a lot of things and it is difficult to find the exact cause.

  However, the error should always be reported as a bug. It gives a wrong idea, which is actually the issue and this will lead to someone else in the future in a ghost rabbit hole that does not exist.

  Thank you

  Tim

• Download of the slightest error of file system on mime_header w "digital error or value".

  I am trying to download a pdf (and xls) file from the linux file system by using this procedure. I have a directory defined for "OFFICIAL REPORTS" in Oracle, and I can verify that the file exists in this directory. The length of the queue is returned, but we get an error on the statement of owa_util.mime_header. Here is the procedure:
  
  CREATE or REPLACE procedure Web_Download (file_in IN VARCHAR2)
  AS
  l_filename BFILE.
  V_LENGTH NUMBER;
  
  BEGIN
  
  l_filename: = BFILENAME ("OFFICIAL_REPORTS", file_in);
  V_LENGTH: = DBMS_LOB.getlength (l_filename);
  
  dbms_output.put_line (' length of file: ' | v_length);
  --
  BEGIN
  -implement the HTTP header-
  
  -dbms_lob.open (l_filename, dbms_lob.lob_readonly);
  
  sys. HTP.init;
  
  OWA_UTIL.mime_header ("application/octet", FALSE);
  
  sys. HTP.p ("Content-length: ' |") v_length);
  
  sys. HTP.p (' Content-Disposition: attachment; filename = "" | ") file_in | '"' );
  
  OWA_UTIL.http_header_close;
  
  WPG_DOCLOAD.download_file (l_filename);
  
  exception
  WHEN no_data_found
  THEN
  BEGIN
  dbms_output.put_line (' end of file reached.) Closing file ');
  END;
  
  WHILE others
  THEN
  dbms_output.put_line (' error num: ' |) SQLCODE. "message: ' |" SUBSTR (SQLERRM, 1, 64));
  dbms_output.put_line (' another error has occurred.) Closing file ');
  -DBMS_LOB. Close (lob_loc);
  END;
  DBMS_LOB. Close (l_filename);
  
  END web_rs_download;
  /
  
  When we run the package in Oracle, we get this dbms_output:
  file length: 2819089
  error num:-6502 message: ORA-06502: PL/SQL: digital error or value
  Another error has occurred. Closing file
  
  In APEX, we see a download dialog box to open or save the file, but the download is 0 (empty) bytes. We checked the network ACLs, we checked the APEX body for print server settings, we are at a loss. Help, please.

  Not sure what your question is, but it works fine for me view the PDF in a page.

  html text area
  -------------
  < object data = "f? p = & APP_ID.: 1: & APP_SESSION. ": APPLICATION_PROCESS = DO_SHO_PDF:P1_FNAME:test.pdf ' type = ' application/pdf' width ="500"height ="500"> alt: < a href =" f? " p = & APP_ID.: 1: & APP_SESSION. : APPLICATION_PROCESS = DO_SHO_PDF:P1_FNAME:test.pdf "> test.pdf < / a > < / object >"

  Anonymous application, pl/sql block: DO_SHO_PDF

  DECLARE
     l_blob    BLOB;
     l_bfile   BFILE;
  BEGIN
     DBMS_LOB.createtemporary (l_blob, TRUE, DBMS_LOB.SESSION);
     --l_bfile := BFILENAME ('MY_DIR', 'test.pdf');
     l_bfile := BFILENAME ('MY_DIR', v('P1_FNAME'));
     DBMS_LOB.fileopen (l_bfile);
     DBMS_LOB.loadfromfile (l_blob, l_bfile, DBMS_LOB.getlength (l_bfile));
     DBMS_LOB.fileclose (l_bfile);
     OWA_UTIL.mime_header ('application/pdf', FALSE);
     HTP.p ('Content-length: ' || DBMS_LOB.getlength (l_blob));
     OWA_UTIL.http_header_close;
     WPG_DOCLOAD.download_file (l_blob);
  EXCEPTION
     WHEN NO_DATA_FOUND
     THEN
        NULL;
  END;
  

  The file download is similar:
  HTP.p (' download the bin file < a href = "f?) p ='|| v ('APP_ID') | » : 20 :'|| v ('SESSION'): ': APPLICATION_PROCESS = DOWNLOAD_FILE:P20_BINFILE :'|| v ('P20_BINFILE'). ("" "> Download < / a > ');

  Anonymous application, pl/sql block: DOWNLOAD_FILE

  pkg_name. SAVE_FILE;

  -- snippet of pkg
     PROCEDURE save_file is
         l_blob    BLOB;
         l_bfile   BFILE;
      BEGIN
           DBMS_LOB.createtemporary (l_blob, TRUE, DBMS_LOB.SESSION);
           l_bfile := BFILENAME (g_tmp_dir, v('P20_BINFILE'));
           DBMS_LOB.fileopen (l_bfile);
           DBMS_LOB.loadfromfile (l_blob, l_bfile, DBMS_LOB.getlength (l_bfile));
           DBMS_LOB.fileclose (l_bfile);
           owa_util.mime_header('application/octet', False);
           HTP.p ('Content-length: ' || DBMS_LOB.getlength (l_blob));
           htp.p('Content-Disposition: attachment; filename="'||v('P20_DISPLAYNAME')||'"');
           OWA_UTIL.http_header_close;
           WPG_DOCLOAD.download_file (l_blob);
      exception
        when others then htp.p(SQLERRM);
      END;
  

  Published by: maceyah on March 9, 2012 15:03

• There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  Hi, I m a bit new in LabVIEW and I'd like to ask a few questions...

  -There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  -One API PI or raspberry beaglebone exists for LabVIEW?

  -Power supply Wich can recommend you control with LabVIEW? (some chip solution witn 0 - 30v / 0 - 3A DC)

  Thank you very much for your advice!

  Best regards

  Elena

  Elena,

  I know raspberry, so no comment on that.

  For the rest:

  -Do you want to create tools for developers? If so, we must look in the API of project VI and VI server. If this isn't the case, please compile your application LV as executable and call this one using a batch file.

  -LV prefer specific supplies. LV is a programming language. There are several power supply providers (including OR) which provide directly the LV API for their power supplies. So, essentially, the approach is:

  1. choose food that serves your needs.

  2. check if the power supply has a standard interface for programming (such as Ethernet, GPIB, or if the power supply is PXI, is already providing a programming interface!)

  3. check if the LV API (so-called "instrument driver") is available for the device. In the case of a PXI system, get you a device driver (for example NI DCPower).

  4. check if the LV samples are available (for example in the Finder for example LV once you have installed the driver).

  Norbert

• When the operating system starts, a window opens asking me to "choose the program you want to open this file: file: rundll32.exe.".

  original title: 'Open with' problem...

  My office was attacked by malware. I have run virus scan and all updates that were available. When the operating system starts, a window opens asking me to "choose the program you want to open this file: file: rundll32.exe.". There are recommended programs and other programs, but I'm fairly certain that none of them are correct. Can anyone help direct me in the right direction to solving this problem? Every program I try to open, translates into an opening by asking the same question, but the file name changes to whatever program I am trying to the window. Thanks in advance for any help.

  Hello

  Just in case there are persistent pieces of malware here is the method of complete elimination.
  .exe question difficulty in the next message.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now) and
  Double-click it, and then run it like this. You can rename it back later. Do the same with
  other programs according to the needs. Use this method to others as needed - NOT assume all
  a program deletes all or that it is no other malicious software.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  The AV.exe malware goes by many names:
  
  XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
  antivirus, scams for you force to pay for them while they have no advantage at all.

  How to remove Vista Antivirus 2010 as well as the other varieties AV.exe.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
  Run them in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• Possible to have a directory structure in the app/native file system?

  I have implemented some assets in the bar - descriptor.xml, some of which are files (to root) and some files (which have files and other subfolders in their midst).

  If I inspect 'BAR packages' with the IDE everything seems to look OK, IE:

  AppName.bar
  + native
     - File 1   - File 2   + Folder      - File 3      - File 4
  

  From code, I can call the function fopen() to files in the root (file 1 and 2 file in the example above) and read without problem.  However, any attempt to verify the existence of the folder with stat() or attempt to browse with opendir () /readdir () it fails completely, as if it does not exist.

  In fact, I tried iterate the contents of the folder root app/native with opendir () /readdir () in order to see what is there and it does not work too (opendir() returns NULL).

  I'm starting to think that simply directory on app/native operations are not possible.  Am I missing something?

  Thanks for your help everyone, after some messing around I managed to solve my problem (s)!

  I changed my code to use a relative path (app/native) rather than building an absolute path based on the working directory.  This solves nothing but contributed to make paths easier to deal with in general (note: sample PlayWavFileMakefile should probably be changed to use the relative method, since it's where I copied it from).

  Then, I changed the to a zip file .bar file to inspect the content and used perspective of information for the system of the IDE to inspect the mounted volume my application during execution.  Being new to this platform, I didn't realize you could do either of these things - everything checked OK, but this gave me full confidence that the problem was probably in my code and do with the operating system or my package bar.

  Finally I found that I had two problems:

  -The first was to make a stupid mistake when you use the QNX dirent_extra_stat specific structure to establish if a line item is a file or a directory during the iteration of the directory tree.

  -The second problem was hard to find but easy to solve.  I found that I could iterate directories using opendir () /readdir () successfully, but only on the main thread.  Most of my file access is on a thread of work however, and this does not.  By inspecting errno of the filesystem in the event of failure, I found that there was a story out of memory.  I realized that I had to use a larger stack size when creating the thread, and then everything worked OK.  Interestingly, I used only a small battery of 4K, which worked well on WIndows, OS X, iOS and Android, but I had to wear to 32K for the PlayBook.  Most likely, QNX uses the stack for many of its variables from work here and other platforms support the pile.

  I hope this can help someone else in the future.

• is it possible to see EVERY folder and file that exists on the drive hard on one screen and in one place just as you could do in much older versions.

  OK... so I had an accident and there was good and bad news... the good news is that I was able to get it started and running "Save", but the bad news is that instead of giving a new image system clean (as I expected), I had a bunch of random pictures and other unimportant things and many important things seems lost but I think that its still all somewhere.

  now... to the front sometimes there was a windows program called "windows explorer" that would put all folders and all files that was on the hard drive on a single screen, and you can search through them.    When I shoot to the top of the Explorer windows on win 7, I get a page with a bunch of files minor that some things in them, but not what I see already...

  so... my question is simply "is it possible to see EACH file and a file that exists on the drive hard on one screen and in one place just as you do in earlier versions.    I did some research and went thru records that he will show me but I explicitly want is to see EACH file and folder that exists on one screen...

  is it possible in win 7?   and if so, how, please

  Steven

  Steve,

  Are you talking about the Windows Search function?

  In Windows Explorer, open the top-level folder that you want to watch in [C:\Users\yourusername\Documents or whatever it is you want] then look in the upper right area - there is a white box to the right of the address bar.  This is the search box.  Type * and then pause and it lists all the files in this top-level folder down through its subfolders.

  You can find more information about using Windows Search in

  A Guide to using Windows Search; Two Alternatives to Windows - Wiki

• This disc contains a "UDF" file system and requires an operating system that supports the ISO-13346 "UDF" file system specification.

  I've seen other posts on this topic. Nothing seems to work, so I thought I would explain my situation.

  The machine is new. Win7 64 bit company. The problem I see is that I try to load some versions of Visual Studio on the new machine. However, none of the discs auto-run using my local internal DVD drive. They all have a Readme file with the message "this disc contains a"UDF"file system and requires an operating system that supports the ISO-13346"UDF"file system specification."

  I know that the discs are good, I used the on my old machine, and I can always use them on other machines I tested.

  The real kicker here is that I can plug an external USB DVD drive... and then the local drive starts to read the installation discs! It's like making this action allows something else in the machine.

  Also, I even restarted the machine mode of diagnosis (without external DVD drive attached)... and restart, the drive would read the installation discs. BUT when I do a full stop and then turn on the machine upward, the local drive gives me the same readme file. Again, it is as if something gets activated, and then reset to a complete stop.

  I am at a loss of what to check then. Real head-scratcher, because I know the drive works and the machine can recognize the drive and even read installation discs.

  I do not have the applications installed on the machine of DVD burning, so I don't think there is a conflict.

  Any suggestions are welcome.

  Thanks in advance!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums so the problems occurring on Windows 7 Enterprise.

  Forum TechNet Windows 7

  Hope this information helps.