Panel Test DAQ opened on the remote system

Similar Questions

• What are the limitations of access to the remote system?

  I've got a PXI-1042 remote controller 8108 and 5112, 6723 & 8420 PXI. I can see all the devices remotely from my laptop to the MAX 4.4 (under NIVisaServer).  My problem is that I don't know if I can use all of these cards remotely?

  I am programming in C++ of MS using VISA & DAQmx libraries and have been able to use the serial ports of the 8420 distance without any problem. But the programming remotely 6723 poses a greater challenge. On previous projects (not involving remote systems) I simply defined virtual world channels in NOR-MAX and DAQmx... used library calls to control. But I'm not able to access the Global virtual channels on the remote system and I can't create anything on my laptop that connect la carte 6723.

  Also, I can't run OR-SCOPE Soft Front Panel on my laptop because it is impossible to find the 5112 digitizer.

  Is it possible to have full access and the capacity for remote 5112 & 6723 card?

  Ken

  You are able to view the various devices on the network to the MAX, but unfortunately you can not create glodbal virtual channels or use the functionality of these cards.  The best way to use these cards on the network is to use the remote façade (in LabVIEW only), Remote Desktop, etc.  I have included some useful links to get more information.

  Display of an Application or a front panel remote using LabVIEW

  http://zone.NI.com/reference/en-XX/help/371361B-01/lvhowto/viewfrntpnlrmtlyusnglv/

  Do the NI 5102, NI 5112, and NI 5911 Oscilloscope cards support remote device access (RDA)?

  http://digital.NI.com/public.nsf/allkb/8AC1067C0944FACD8625697A005B92C8

  What is device Remote Access (RDA) and where is the server?

  http://digital.NI.com/public.nsf/allkb/5CC9792C6CD4A34C862565BC0072D5DF

• None of the remote systems are found in Max in VMware

  I started using virtual machines and I don't see any remote systems listed in MAX within the virtual machine, but I see the remote system on my real machine. It is not a big problem because I can always run my code and connect to the target of RT of the project within the virtual machine, but when I need to look at MAX it would be nice to not switch back between my VM and the computer. I wonder that if it is behavior, others have noticed, or is - it possible my MAX database is corrupted? The section of the entire remote systems doesn't fail, just no hardware found and listed under it when I update. I wonder if this is a problem with how the virtual machine sets up the connection TCP must work with the real hardware. Hoping that someone more competent than me in this relm can point me in the right direction.

  You have probably done this, but you made sure that your VM is set to a "Bridged" mode where the network connection between the virtual machine and the host allows him to get an address from an external DHCP server and is not only local host machine?  MAX can only auto-detect devices to its subnet via a proprietary (OR-RFP) protocol or via AppleTalk (according to how the devices are configured and what software is on them), and if the interface of the virtual machine network is in mode "NAT" or "Host-Only mode" which interferes or completely blocks the discovery method.

  -Danny

• How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  Hung Nguyen

  Hung Nguyen,

  The installation of drivers for all targets in real-time remotely is more or less the same. First install the driver (in your case the NO-Sync) on your PC, then install it on your system remotely through MAX. For step-by-step instructions, see install the software on your NI CompactRIO controller.

  See you soon,.

• How to replace Labview RT10.0 with RT8.2 on the remote system?

  LabVIEW RT10.0 is installed on our new PXI-e8133 controller. Our host is running Labview RT8.2. That's why I'm unable to download and run a VI from the host to the remote system.

  I want to download RT8.2 between the host and the target (so replacing/removing RT10.0 on the remote system). On another controller, we could choose the 'old' RT8.2 by download to MAX (which replaces the latest version). This is not an option with the new controller. Add/Remove software MAX, available versions of RT on the host is 'none' (even if RT8.2 is listed under the software on my system).

  How to install RT8.2 on the remote system? I have to completely remove RT10.0 first of the remote system?

  Thank you!

  Unfortunately, the minimum Version of the compatible LabVIEW RT for the PXI-e 8133 is 2010. This means that you must either upgrade to LV2010 or choose another controller.

  Kind regards

  David Ashlocke

  Technical sales engineer

  National Instruments

• VISA does not recognize the remote system max

  I tried to configure the instrument cards in a chassis SMU, and I'm unable to get a VISA to recognize.  Reading some other posts related to names of resources VISA, I found that you should be able to drag and drop devices Max NOR in a Labview diagram, and it will automatically create a resource VISA for device control.  I am able to do that the name for the devices installed on "My System" (COM1 for example), but when I try to do 'Remote system', a few drops in a block of text.  If I try to create a resource VISA directly control, the drop down menu displays only the devices on my system.  I even tried to change the VISA category for the control.  Still not get visa to recognize the remote devices.  Please notify.

  Working with Labview 2012 SP1 f5

  PXI chassis, 1082

  Controller OR SMU 8133

  VISA 5.4 installed on PC

  VISA 5.4 installed on the controller

  The firewall is disabled for the NIC in chassis

  Thank you

  GSinMN

  http://digital.NI.com/public.nsf/allkb/F3AB0B5D7DBA367C86257982005BBF2C

• Windows XP. The system power finished on the computer self-test now booting of the operating system

  When booting from XP PRO I get this audible, ' system completed power on self test.» Computer, now the startup of the operating system. ». How can I disable this audible?

  1. turn off your PC
  2. start your PC
  3. press the DEL key (or whatever key allows you to access your BIOS) on your keyboard while it is booting (it has a message when, but no matter.
  4. you are now inside the BIOS
  5. go to the Advanced tab, then configuration of device e/s-which is the way down
  6. go to the POST Reporter speech, click Enter, and then turn it.
  7 does.

• Determine if a port is open on the remote server

  I am trying to write a function to determine if a port is opened on a remote server. I want to do it in ColdFusion.
  
  See below for what I come up with so far
  
  The problem I have with this method is that on broly, it takes 20 seconds to return. I found methods using InetSocketAddress which allows you to set a time-out, but that doesn't seem to be available in ColdFusion
  
  I'm certainly not stuck on Sockets so it another method that works.
  
  I use CF 7 on Server 2003
  
  Thank you
  

  That seems to work exactly as I hoped.

  Thank you!

• test file exists on the file system?

  Hello

  I'm new to flex and I'm going through books and video to learn... In the 16 video (about 21 minutes in) of "Creation of custom event Classes": http://link.brightcove.com/services/player/bcpid1681730258?bctid=1681717827 he talks about the verification of the existence of a file using URLLoader and error events but the file is an image on the local file system.

  What is the standard? Or are there Classes and methods to test for the existence of the file on the local file system? URLLoader used me for the Client-> Server URL controls...?

  Thank you! :-)

  Nick

  You can check the existence of a local file in an AIR application, with the help of the File class, but you cannot check the existence of a local file with a Flex application due to sandobox.

  If this post answers your question or assistance, please mark it as such.

• Linux LVM VG/w mounting on the remote system

  I tried the VG/LVM method in examples of shell (lvmCreate.sh & lvmMount.sh) and I have a question like its

  partners to do this using the API VDDK flat file. for example

  Flag of VixDiskLib_Open() and VIXDISKLIB_FLAG_OPEN_READ_ONLY.

  The name VG editable when you open the flat file in this way. I get the following errors...

  root@shuttle vmdiscover# vgrename YafuWk-3orv-WuXR-0Kf9-HuLk-1uRA-Ip6xNe vmwarelvm

  / dev/loop0: write failed after 1536 to 4608 0: input/output error

  From now on, there is no reading only mounting Linux support. So, you can simply use the default flags (0)

  -Remy

• Can't ssh to the remote system to guest VM

  I have a RHEL VM running on a host Windows XP using Workstation 7.1.4. I have installation Bridged networking for my VM and I gave the virtual machine a static IP address on my network. I ping the VM from other computers on my network, but I have problems try to ssh in the virtual machine. If I ssh between the host and the guest VM I can win with success however, access ssh'ing of any another computer does not work. I use Putty to ssh on Windows and I tried on another RHEL box as well. I've seen many discussions about bridging works does not correctly and I think this is part of my problem since the speech of the host and the guest, but I'm not convinced.

  Anyone have any ideas? Very much appreciated.

  first things first:

  Go to the virtual network editor - select VMNET0 and change the drop-down list of 'bridging auomatic' to the NIC physical to use for vmnet0.

  The automatic bypass does not work reliable on almost any installation - especially those with more than 1 physical network adapter.

  I see you are using a McAfee NDIS filter - this is another candidate in trouble. Try to disable it and see if that makes a difference

• readings of Veristand instruments with a remote system

  I'm new to the National Instruments and Veristand material and I'm trying to use an instrument with Veristand to see if I can get readings of this instrument. I use a PC with Windows Vista and I am connected via a network to a PXI-8108 controller in a PXI-1050 chasiss chassis. The instrument is just a thermocouple which I use to become familiar with everything. The thermocouple is connected and the connection SCB-68 block which is connected to a PXI-6221 multifunction data acquisition in the chassis. I am able to create a task in MAX under remote system and everything seems to work. What I want to do is to get the readings in Veristand, and I don't know if I need to create a custom device that is related to the acquisition of data somehow, or if there is another way to do it. I created the DAQ hardware in the system Explorer, but I see no way to link the real DAQ hardware on the remote system. I wonder if anyone can help with this.

  All advice is appreciated.

  Thank you

  You can read the value of your thermocouple directly from VeriStand channel, but the process is different than using MAX.

  In the system Explorer, add your DAQ hardware that is wired to your SCB-68. Make sure that you specify the same name (i.e. ' Dev1'), which is the make up something, you also that you have imported the peripheral canal which hangs to the thermocouple (i.e. "ai0"). There is no way in System Explorer to specify that this channel should be scaling of thermocouple. VeriStand initially served this string value value brute power. However, you can set the limit high and low for this channel to something small as +/-1V, since thermocouples have very small readings.

  You add the balance to your system separately after the deployment of the system definition, you have created the target of RT. For this to connect to the target using the workspace and select the tool to the workspace on the Tools menu called channel scaling and Calibration Manager.

  In this dialog box, you will see your TV listed DAQ. Navigate in the dialog box assign an appropriate scale of thermocouple to your channel. Once this is done, the target will remember the scale for this channel until what crush you.

  I would like to know how it goes...

• SMU remote system do not read file .lvm

  I try to get my remote system (SMU remote system) to send a signal of analog voltage by reading a file .lvm.

  I have a project in real time implemented, and under my remote system, I have a VI that is supposed to give a signal of analog voltage.

  The implementation of VI begins by reading a file position (.lvm). After that, it is connected to a DAQ assistant.

  I'm already sure that everything is connected properly, and that it is the right channel. The reason why I'm sure is because in the DAQ assistant window, I can click on "run" in order to send a test signal. I am able to capture this signal to test with an oscilloscope. Therefore, I am sure that the system is all set up correctly.

  Finally, I don't know if it's important, but the measure file he was reading is located in my host. I don't know if I deploy when the VI to the target, if the measurement file is sent to the remote system with the VI.

  I was wondering if someone could help me please.

  Thank you

  Leon

  Hi Leon,

  If I understand correctly, you are trying to read a file .lvm waveform data and send this waveform through your SMU system. What devices are specifically using (chassis, modules...)? What exactly happens when you run the VI? You see errors? If so, what are the codes that come with these errors? Additional information on what the file .lvm would be also useful. What are the functions you use to play the .lvm file?

  Kind regards

• MAX crashes when you try to connect to the remote server in VISA

  Hi, I'm running a problem with MAX OR when trying to setup of a client/server VISA system.  I had the first server tried 4.3 visa but she not even me would record the port on the server settings.  When I tried to connect to the server from a remote machine to access the RS232 ports, it could hang NI MAX or do nothing, depending on how I tried to implement.  If I click with the right button on the remote system in the right configuration pane and follow the wizard through, it doesn't matter, if I go to the toolbar tools-NI-VISA options and follow the wizard, NI Max crashes at the end.  Then I went online and got the version 4.4.1 and tried with the same results.  I also have abnormalities in safeguarding some configurations OR max leading me to question if there are questions of privileges.  The operating system is Windows XP Pro with Service Pack 2 on all machines.  I'm logged on with administrator rights and everything seems to have full read/write privileges, but I still have problems.  The issue of saving the port settings, I tried manually setting the parameters, as described in

  http://digital.NI.com/public.nsf/allkb/8EBAEC8A57BB48BE862574F90072D3DD

  but unsuccessfully in version 4.3, but it worked very well when I upgraded to 4.4.1 without modification of rights or privileges so some things seem weird.  Any help would be greatly appreciated.

  Hardware Dell with Windows XP Professional and SP2 computers

  The server computer has a 16 port Rocket port RS232 port Council

  I will access ports with a program written in LV7.1, but I haven't gotten that far yet

  Network is fine, I can ping the server to the client computer and permissions are set on the server and the client is pointing the right machine.

  Thank you

  CS

  Thanks for the reply.  We use MAX 4.5 so it wasn't the problem.  We are not exaclty sure what the problem is / was set apart he healed himself when we all uninstalled and deleted the VXIPNP directory and reinstalled everything.  When we did, everything came and worked as it should.  One thing that may or may not be relevant, is when I was put in place of the customers, I went through the Options Tools - NI of VISA-VISA to complete configuration rather than right click on remote systems.  Previously, this would cause MAX to crash when you complete the wizard if I though it would be a good test when I put first and, since it worked, I followed this procedure on the rest of the computers.  Anyway the problem is solved and it works.  Thanks again for the input.

• View files and directories on a remote system (RIO) on a host (PC)

  Hello

  Please assume that we discuss software based on the example of standard project "Labview FPGA control on Compact RIO." The host is an initiation LV14 ongoing fall of running PC, the remote system is a sbRIO-9636 having a USB HDD and SD card. The objective is the control of the process. The control process is not relevant to the question.

  That question is on the implementation of the following functionality: the user operates a host running a user Labview vi (UI Main.vi) the interface locally on the host computer. Part of this vi should offer the user built in dialogue (some express vi or another) or custom dialog (a vi to measure on request). The dialogue should display the directories and files on the remote system that is running RT Main.vi and it must allow the user to select a single XML file on the remote system (which contains generic configuration information). The file name is passed then to the remote system and the remote system will act to open and fill out a few configuration variables.

  I'm sure that a widely used solution exists for this problem but I have not found the right words to type in my favorite search engine and yet to produce the result. I propose the following:

  (1) the user clicks on a button "select config file" Main.vi UI

  (2) the place of event loop UI Main.vi a message on the main message queue of the UI based on the event value caused by the modifier key

  (3) the UI Main.vi enqueues message loop a separate message on the stream from the network "user interface control flow '.

  (4) the Main.vi RT, RT loop - UI Commands.vi Subvi receives the message from the stream and places it on the message Main.vi RT queue

  (5) the message Main.vi RT loop performs some functions to read disk, directories and filenames of the RT system structures

  (6) name of file and directory (5) data are converted to a variant and went with an appropriate message in the network of RT writer stream

  (7) the Main.vi UI periodically reads the stream network of RT writer (it's in the 'monitoring loop') and place the message received (6) in the queue of messages in the user interface

  (8) the message queue of the user interface main filled the main façade of the UI with the data

  (9) the user selects the directory and the file they want and click on an ok"" button.

  (10) the causes of button click ok the event loop of the main UI to place a message in the queue of messages of UI Main.vi due to the expectancy value change on the ok button

  (11) the places UI Message Loop a message on the stream from the network "User interface control flow" with the selected file name of the selected file as the data (stored as Variant)

  (12) the RT Main.vi, RT loop - UI Commands.vi Subvi receives the message from the stream and places it on the message Main.vi RT queue

  (13) the RT Main.vi message loop opens the XML file and populated the appropriate variables with the configuration options that are there.

  The user must be able to cancel the dialog and avoid using a configuration file, but I have not delt with it here.

  Now for the questions:

  (1) is this a logical approach?

  (2) are there any suggestions for a better way?

  (3) all links to pre-written code that will allow to me impliment all or a part of this with minimal effort (I am referring to dialog bit rather than the forest of streams and events network as these structures still exist and have a lot of custom code in them)?

  Thank you

  James

  I do something like that, but as the interaction of the user on the host, I keep the Configuration files also on the host.  This saves a few steps:

  • Host opens VI of dialogue saying "Choose Configuration file", pointing to the location designated on the host.
  • The user selects a Configuration file.
  • Host bed data packets to send to remote files.
  • The host sends Message 'Configuration' with the previous step Configuration data remotely.
  • Remote control receives the message and any Configuration configures automatically, possibly to send message 'I'm Ready' return home.

  All I/o file consists of the host, and only a single host remote message must be sent.

  Bob Schor