test limit digital multiple

Similar Questions

• Where can I get a pdf of the sample to test the digital signature?

  I'm testing my digital signatures in Adobe Reader X on Windows. However, I can't find a PDF file that has the "correct" rights for me to sign.

  
  

  Y at - it somewhere that I can get an example of PDF file that will allow me to try my digital signature?

  And here's one: https://workspaces.acrobat.com/?d=wdmk-UM-PE35I3UdLukz9g

• To a result NULL of Labview TestStand to a type of digital test limit.

  Hello:

  I am looking for a way to pass a null value as a result in a limit test multiple digital test type.  My tests are written in Labview.

  The tests now pass a value of '-' 999 to TestStand to signify that this measure has not been made, but this requires additional processing and code in our data analysis tools.  Passing a value zero would simplify the tool and reduce the workload.

  Thank you

  Mike

  You can switch NaN instead.  At least, I think you can.  TestStand supports NaN, but I never spent through Labview adapter, so I'm not 100% sure if it will work.  NaN is treated in tests limits labview as follows (hat tip to James Grey here):

  (NAN > x) == false
  (NAN == x) == false
  (NAN< x)="=">
  (NAN == NAN) == true

  I don't know how it would be dealt with when writing a good database.  I guess it depends on the data base and values of what digital special supports.  A quick search shows that NAN (not sure if he would lift an error or that) does not support Sybase, MySQL stores NAN as NULL in numeric fields, SQLite stores NAN as a special string code, Access stores in the form of NAN.

  So you should always write a step for translate NAN for NULL values, but I think it would be easier to write and maintain than an arbitrary number.

• How to make a limit digital test with OR condition

  Is it possible to make a test step which is a comparison with a RC and NOT to condition?

  The code module returns a revision of PCB and the acceptable values are not States.map.

  For example, review of card must be 14, 15 or 17 but not 16.

  Stage of Custom Types are a type so they copied to any sequence file that contains one instance of them.  So when you deploy you will be fine without having to deploy all the ini files.

  You can actually just create the new stage in the movie only file and not worry do ini-files.

• Use the return value to do step digital multiple success or failure

  Hello

  I use a multiple digital step to check several measurements by an external DMM through a function created in CVI.  I would like to use the return value of the function to replace the global status of the step. The reason is that the return value indicates a communication error, while steps are being taken, and which would lead to a "fake" fake or false 'Pass '.

  What I would do is more or less this >

  If the return value is 0, then check if the measuremets are between the limits

  If return value! 0 = there was a communication error so step continues to operate independently of the measure.

  I tried combining multiple digital step with a step of pass/fail, but it does not work.

  I also trie to change the expression of the status of the multiple digital steps but basically ignores him.

  Any ideas?

  Thank you

  Javier

  Why don't you just make that return the value limits for multiple numerical limit stage.  Comparison of the EQ value and the low limit to 0.

  That would make the most sense.

• Trapezoidal profile of limit mask Test limit

  So one of our proportional valves, let's use the gain scheduling setpoint profile to create a current trapezoidal entrance to the valve. This trapezoidal entry represents a cycle for the balance we're control (it is periodic and this profile is repeated for several cycles). I am establishing a system of integrated security and I am wanting to create a profile of limit which is basically a trapeze offset of +/-1 my. The larger and the smaller trapezoids would be constraints and one in the middle would be entered into the system. I don't want where if the input exceeds the trapeze inside or outside, the system switch in the safe state. I tried to use the mask and limit VI and defined my upper and lower limits by 4 different points for each limit but when I give him my input signal and observe the tested signal, I see is entered into the system with a horizontal line at y = 0, which is the limit of green. I can get the upper and lower limits continued to work, but I really want a more defined constraint closer since we are controlling a very large structure. What I am doing wrong? I have attached a picture of the entrance to the system.

  -Thank you

  Hello

  In my view, that the problem is that you have enough datapoints defining the upper and lower limits.  You have placed only coordinates of the vertices of each trapezoid.  The mask and the limit test VI do not automatically generate datapoints between these points, he needs a complete set of datapoints defining the whole graph.

  Your input data have datapoints much more than the actual limit, you have defined, this is why it appears as a line at y = 0.  It traces four points on a graph which has probably a lot more data on the entry points.  You must generate trapezoidal form signals and son of these signals in the upper and lower of the express VI limit entries.  In this way, that you don't have to fill all the datapoints manually.

  Below, I have included a LabVIEW project example that shows how to proceed.  I used this example to create a Subvi to generate a trapezoidal form signal.  She uses the ramp functions to reconstruct a picture of datapoints that looks like a trapezoid.

  I think you should use the Subvi "Generate trapeze", I have included in my project.  Generate the superior trapezius and lower outside the while loop with the same amount of datapoints that you expect your data entry.  This should save if you do not have to generate the waveform of processing each iteration of the loop.  It will look something like this:

  

• No puedo mandar una salida test panel digital desde el

  Buenas tardes

  El reason del present mail are para su request apoyo para resolver una duda tengo, using el test me panel led MAX, una tarjeta NI PXI 6527, mando a iniciar (Start button) the prueba una SCB-100 using y estoy conectado has linea 0 del puerto 3, not pine 97 (P3.0 +) y 98 (P3.0-) are una salida digital , hago los botones 'All top' click y 'All down' pero no nada obtengo has digital output, las tickets if las puedo leer desde el panel test, tambien me do good + 5v y GND.

  I want to connect a led of color rojo como indicator signal pero nor even obtengo una Señal.

  The favor su apoyo pido

  Saludos cordial

  Buenos Dias, Rafael,

  Me designed that are MAX a self-test, esto hiciste en el para poder saber if you componente esta in buen estado. If you llegara a dar como resultado as no lo pasa ahi tendriamos problemas.

  Sin embargo, no creo as you sea este caso, todas maneras No debes pasar por el alto hacer esta prueba.

  MAS especificamente sober lo as our questions, esta tarjeta tiene relevadores estado solido, por lo as the conexion no can be directa.

  In estos links to habla a sober poquito como hacer las conexiones para una Señal TTL handle, not con the cual no tendrias problemas para poder encender UN LED.

  http://digital.NI.com/public.nsf/allkb/209FA5B16C73E19B86256D9F00764B63

  http://digital.NI.com/public.nsf/allkb/3D591888EB53A7CE86256D1F0001AEE3

  In the first liga tiene una liga al manual dentro y on page 3-11 viene UN esquematico. Intentalo, No debes tener of any lost.

  If siguieras having algun problema are some screws para poder test you tarjeta, aqui you mando the address of uno.

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4841

  Finalmente, if not our dio nada esto pero aun no connect el is can be LED, is a tool in the page nor para diagnosticar if you card is encuentra in buen estado.

  Lama's Diagnostic Utility, the liga esta aqui y you tarjeta if soportada esta para esta application:

  http://Joule.NI.com/nidu/CDs/view/p/ID/2244/lang/en

  Saludos, y Exito en you application.

• Test of digital I/o

  Hello

  Could someone please see the/explain how I would get an entry port to light a lamp in labview. He 8 switches I need to turn it on. I'm confused how to convert digital true false? I have attached my VI and the picture of the physical installation

  See you soon

  

  It seems that your "Digitalin" task is configured to read all of the port. So, you will get a 8-bit number representing all 8 lines of the port.

  You can convert the number in an array of Boolean and then index on each line.

  

• Where to change the test limit

  A Council, we test a 17 subseqs in its sequence file. In one of these 17, two statements to check must have different limits for a different version of the Board of Directors. For now, the limits are hard coded numbers on the tab limits for the two statements to check. Is there some standard idioms or basic rules to know how to make the readings like this flexible?

  Thank you

  JVH

  Flexible how do you what it? If you don't mind the sequence to deal with new publishing models, you can the limits by writing them in local variables with a couple of precconditions. There is the shipper of the property and you can read the limits using them. This is the approach that I'll eventually take--whenever we can get everyone to agree on the design of database.

• DAQmx: Outputs digital multiple tasks for the same card using the on-board clock

  I have a PCI - 6259 DAQ I'm programming with DAQmx. I want to create two tasks of digital output on the same card. A single task using on-board clock, continuous samples. The other task uses an onboard clock, finished samples and an external trigger with trigger Start.Retriggerable property = TRUE. Is this possible with my hardware and DAQmx? There will be a conflict if two tasks use the same clock source?

  This is not possible, you can have only one task timed materially by device.

  Best regards

• You can limit Digital Publishing user?

  My name is Faz Kamisan and I am graphic designer for AVANA, a bit of background on what we are doing is that we are a company of recruitment and training aimed at the national client workbook to custom development done and evaluation. I came across your site and I was wondering if:

  We want to create a solution of digital workbook to our customers, Digital Publishing solution offered by creating an output that may not be available for the specific end user? That is not searchable in the app store or google the game.

  Example: we create a digital publication of files to a client A and want only customer A members to download the file Digial Publishing.

  Any solution or suggestion you guys have it please let me know guys

  Yes, using Adobe DPS Enterprise Edition and Apple iOS developer Enterprise license, you can create signed company relies for iOS devices which you can distribute directly to end users who can install them on their iPad / iPhone. You can distribute builds customer website or directly via mail electronic and other distribution methods.

  Android applications are easily distributable until they are signed by Google play, so you can get these distributable applications using DPS Pro and Enterprise edition.

  If you need both iOS + Android for distributing internal, go to DPS Enterprise Edition.

• Making a test limit expands with the content in...

  Hi Guy,
  
  I have a GUI in JavaFX 2.0 which consists of two buttons and a tableview.
  
  A single button adds a column to the tableview and the other deletes a column.
  
  I can't find how do the scene/scene expands with the table columns is added.
  
  I tried stage.widhProperty () .bind (table.widthProperty ())... .and two-way binding... can't understand how this works.
  
  See you soon,.
  BJ

  Hello if you want your stage width according to your choice, and then copy the following code is useful for you:

  class  {
  //..
      DoubleProperty width = new DoubleProperty(100);
  
      public Scene getUI(){
          Group panel = new Group();
          Scene scene = new Scene(panel);
  
          //Button which changes the width property
          Button b = new Button("Try");
          b.setOnAction(new EventHandler (){
              int i = 1;
              public void handle(ActionEvent event) {
                  //changing width property
                  width.setValue(i++*50);
              }
  
          });
          panel.getChildren().add(b);
      }
  
     // main stage
     @Override
      public void start(Stage primaryStage) throws Exception {
          primaryStage.setScene(getUI());
          primaryStage.widthProperty().bindBidirectional(width);
          primaryStage.setVisible(true);
      }
  

  All orders of width are 'width' DoubleProperty and this property is linked with in the widthProperty() of the main main stage in both directions.
  Whenever you click on the button get-the step, he has a width has increased by 50.

  Thank you.
  Narayan

• Limit digital boxes to specific numbers

  I am creating a report card with the form that only allows teachers to enter 1-4 numbers in a box.  How can I do this?

  One option is to add a drop-down list to your form with 1 to 4 under your list items on the pallet of the Field object.

  Another way is to have javascript/formcalc behind a text field to validate the value entered.

• Configurable custom test types

  Hello

  I'm doing a type of custom step that works like the limit works in test limit digital ex.. What I want, is a new component called "Test" with 1 field shall be amended by the insertion of a variable or just an exodus of value 2 as you can do within the limits of Tap, I did a step where you can change this by clicking on a button that opens a LabVIEW vi and from there you can change I'm looking for is to make sure you can change it without having to open LabVIEW test bench as well so that you can insert a variable...

  Attached is a picture showing what I want...

  Marck H Hansen

  Marck Hello,

  At the moment there is no official support for this feature.

  I recommend to visit this idea http://forums.ni.com/t5/NI-TestStand-Idea-Exchange/Ability-to-create-user-built-in-StepTypes/idi-p/1...

  and fire a kudo to her...

  Concerning

  Jürgen

• Multiple TestStand limited digital test next tep

  I am a multiple test limits digital step stype of coding and I have a fundamental question/problem that I don't see a simple solution to.  If I'm measuring and comparing 4 differnet settings, I have 4 different steps to guide out of depending on the result.  How you code this optimal in Teststand?

  It is excellent.  Thank you very much.