Similar Questions

• Is it OK for the test server, and the server signs Local point to the same location?

  There seems to be three places where the files of my site: local files, server assessment and remote server.  I am happy with the remote server.  What I'm confused about are the other two.

  I understand that to build a site using mysql databases that I need to set up a test server.  Here is my configuration: Windows 10, CBWMS 2015.1 using XAMPP with the folder root of my site in htdocs.  I tested FormMail, hence the name of the site is formmail

  

  So, I open one of my files from the local files (right) Panel, modify it and it save (in the local files Panel).  I then use a preview in the browser to see my changes.  It seems that I didn't need to use was ABLE to move the file to the test server, because the file/s are already here, because as shown in the screenshot, the display of local files as the testing server view are in the same place.  What is the point of the testing server Panel?

  I know that I can put the Panel on the left with the remote server. This will allow me to sync with my ISP host.  If I put the left - and probably testing server Panel a sync is useless because the files are in the same place as the Local file?

  Maybe my setup is incorrect.  I guess my question is, is it OK for the test server, and the server signs Local point to the same location?

  Thank you gentlemen (and Lady!) I'll go forward with newfound confidence, Bravo.

• Adding vMA server to the Active Directory domain

  I followed the instructions for adding my vMA to Active Directory server. I see the computer object in AD and a query of vMA looks good, but when adding, I get the warnings below. Can someone explain these warnings and what that if all I have to do to fix?

  [vi-admin@VMA ~] $ sudo domainjoin-cli join xxxx.com d-user
  Password:
  Join the AD domain: xxxx.com

  With the DNS name of the computer: vma.xxxx.com

  [email protected] password:
  Warning: Unknown pam Module
  The same PAM module cannot be configured for the service of wbem. This service uses the module ' $ISA/pam_unix.so ', which is not in this list of the known modules program. Please same technical support by e-mail and include a copy of /etc/pam.conf or/etc/pam.d.

  ATTENTION: An error may be resumed has occurred during the processing of a module
  Even if the "pam" configuration has been completed, the configuration has not completely finished. Please contact support as well.

  SUCCESS
  [vi-admin@VMA ~] $

  
  [vi-admin@VMA ~] $ sudo domainjoin-cli query
  Password:
  Name = vma
  Domain = XXXX.COM

  Name unique CN = VMA, VMware = OU =, OU = XXXX, DC is XXXX, DC = COM

  [vi-admin@VMA ~] $

  It's actually quite normal, I guess, this is the version still using VMware is not compatibility with WBEM (Web - Based Enterprise Management) based on the warning message, I'm not sure if this will be fixed in a later version or a newer version of the same set. As far as I know, it does not affect the integration of commercials with vMA feature.

• Flash animation won't play on remote or testing server in the web page

  I have a Flash slideshow which will play only in a browser, if I click on file > open and open the .swf file locally and directly (not in a web page). He has never played in a Web page, remotely on the web server or locally on Wamp server. It plays correctly in Flash when I test it.

  I tried downloading the HTML page that generates a Flash (no change), and he will not play in this file. I also tried using the 'Insert Flash' of Dreamweaver functionality, and that was not good either.

  Here is the direct link to the .swf:

  http://www.farrelldoc.com/GLW/greenlilysample.swf

  Here is the page that generated from Flash:

  http://www.farrelldoc.com/GLW/greenlilysample.html

  Here is the page I created using Insert Flash:

  http://www.farrelldoc.com/GLW/home.php

  Any help is greatly appreciated! I have a demo tomorrow, and I just got this figured out. I'm at the end of my rope!

  Thank you very much!

  Karen

  Hi karen...

  Well, I did not, he would... But it was a trial.

  Anyway: as far as I understand, when it comes to errors in sandbox, there something

  to do with customers and cross domain permissions. I think this problem you is not

  Flash, but something to do with permissions...

  You can also examine the xml file... It could be that it was corrupted somehow...

  It may contain information that could be used.

  Sorry to say, I have absolutely no experience with SlideShowPro...

  Anyway: it does not work if you turn off debugging?

  Hope you will make it work.

  Best regards

  Peter

• change the root of the server to the external directory

  I'll put up our dev server. to imitate our production file system. To do this I need to change the root of the server at C:/sites Web/xxxxx /. How is this fact by using the webserver built into CF7? I don't know how to change the relative to the wwwroot folder root.
  
  

  Here is the real answer

  http://KB.Adobe.com/selfservice/viewContent.do?externalId=tn_19400&sliceId=1

• I've implemented the * & amp; * % $ test server - now can I please add a Recordset?

  I encounter this problem sometimes with DW. I created an asp site with aspVBscript. When I go to add the application box server behaviors has the first s two checked item (create a site for this file) and choose a type of document, but the third, 'Set up test of the site server' is not, yet I set up the server to test (several times). It's the same parameters of test server that I use on several of my other sites and they are very good. Why the DW could be insisting that I have not put this? I tried to close the application and restart, but he always thinks that I have not entered a test server for the site settings and therefore will not let me add server behaviors.
  
  Someone has any ideas why this is happening and what I could do to fix?
  
  BTW I use Dreamweaver CS3 on a windows XP pro SP2 machine. Windows 2003 IIS Server 6.0 where the site resides.

  The word 'test' in this case really means a test server for Dreamweaver, not for the developer. Dreamweaver must have access to an application server functionining to activate some features like tables can be explored in the databases Panel or selectable columns in the Recordset dialog box. DW is actually ping the test server to generate this information.

  Charles Nadeau
  Dreamweaver
  Adobe Systems

• Learning that problems of setting up testing server (ASP)

  I would like to set up a test server, but despite research in the user manual, I don't understand the installation, that's what I did:

  For server machine have chosen ASP Javascript because the files I want to test are java ASP.

  access: Local/periphery.

  I set up a folder for the test server on the computer that I use as a 'server' (Windows XP network): \\Aleph\shareddocs\testing_server\

  I do not understand what to put in the URL prefix box, I created a folder called "middle" for the site in my directory "testing_server."

  but do not know what to add to http://localhost/

  I would like to use this server to test to see my site on the other computers on my network WinXP. How can I access it?

  By disabling my computer 'server', can we still look at my pages in my browser?

  Grateful for any help.

  If pressing F12 doesn't bring to the top of your page, your definition of the test server is wrong or you have not configured IIS correctly. You can certainly use Preview in the browser to any model of supported on Windows XP Server.

• Can hyperic agents collect metrics from a server where the 'root' FS went to ' read-only '?

  Hello

  Can agent hyperic able to collect measures from a server where the 'root' FS went to ' read-only '?

  IE will be hyperic monitoring work if 'root' FS managed server went to fashion 'read only '?

  Thank you

  The agent record metric data in the local server in the data directory.

  These data will be sent to the Hyperic server.

  As a result, the agent must write permissions on local storage.

• How to connect to your Remote Server when you have a test server?

  Hello world

  UH..., on my site, I have a test server and a remote server defined in my Site Set UP window, when I test the remote server by clicking on 'test' in the basic window, it says 'connected successfully', but when I open the files window to connect to my remote server and transfer files, it is said "test server" on the left column (all files are in red) and when I click the icon "to connect to the remote host" it connects right on the test server and shows all the test server to the files in the left column.

  How to connect to the remote server so I can up load files? Thanks for your help.

  See screenshot of the expanded files Panel.  The remote server icon is to the left of the icon of the test server.

  

  Nancy O.

• Setting up a test server

  Hi - I'm going to set up a test server for the first time in cc DW.

  First, I installed MAMP (I'm on a mac) - I tested the servers and they work. I chose the default ports 80/3306. I pointed my browser to localhost and it says it works.

  Then, I spent in DW and defined the site - everything seems fine. In the "files" window, I can see the local section of the files on the right and on the test server on the left (the records are in red - is it good?). My problem comes when you try to view the live files. I get the following error message

  Not found

  The requested URL /ticDevNew/index.php was not found on this server.

  Apache/2.2.22 (Unix) DAV/2 Server at localhost Port 80
  
  
  
  

  I have placed the files here on my mac:

  
  
  /Users/martinrtroberts/localhost/ticDevNew
  

  Here are the settings of the server in DW

  FOLDER on the SERVER: / Users/martinrtroberts/localhost/ticDevNew

  WEB URL http://localhost/ticDevNew/

  My hunch is that I have one of these incorrect paths (despite the fact the DW appears to able to see!)

  Any ideas?

  Martin

• The output directory to scrub in ADF 11g BC

  Hi all
  
  I was wondering, JDeveloper cleans the output directory after deletion of an object? I ask this question because I decided to erase in one of my test applications, but the output directory (model/classes /...) always contains all the files that I never deleted.
  
  I don't know if it's important, either.
  
  Best regards
  
  Juan Manuel

  Hello

  No, it isn't. To clean the output path, select the project, and then choose Build--> Clean in the JDeveloper menu

  Frank

• Try to change the root directory in built-in Server

  I run the server integrated into ColdFusion 9 to test a web site that I am building. My site is located in a subfolder of the folder wwwroot directory ColdFusion9 (C:\ColdFusion9\wwwroot\Everett\*). I try to use links relative to the root, but I would like that they refer to this directory, not the wwwroot directory. For example, I would like the link "/ index.cfm" to open the C:\ColdFusion9\wwwroot\Everett\index.cfm as opposed to C:\ColdFusion9\wwwroot\index.cfm. It is my understanding that this is possible through the virtual mapping.

  I added this code in the jrun - Web.xml file in the WEB - INF directory:

  <>virtual-mapping

  > resource path < / * < / resource-path >

  < path system - > C:/ColdFusion9/wwwroot/Everett / < / path system >

  < / virtual mapping >

  Then I moved folders CFIDE and cfdocs in the Everett subfolder.

  Then I restarted the ColdFusion server.

  Now I get the following error message:

  404

  java.io.FileNotFoundException

  at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:94)

  at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)

  at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)

  at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)

  at jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)

  to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:320)

  to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:428)

  to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:266)

  at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

  When I go to http://localhost:8500 / I can see all of the appropriate files and directories, so I can see that the root directory has been changed, I'm simply not view any document.

  Any thoughts?

  Jeremy

  HA! I don't know why it works now, but it does. Alexander, I tried your method and it did not work, but then I moved the directory WEB - INF back to wwwroot and he's fine now. For those keeping score at home, here's what I've done with:

   

      /*

      C:/Web_Sites/Everett2

   

  


   

      /WEB-INF

      C:/ColdFusion9/wwwroot/WEB-INF

   

  


   

      /CFIDE

      C:/Web_Sites/Everett2/CFIDE

   

  As I said, I don't know why it didn't work the first couple attempts, but it works now and I guess that's all that matters. Thanks for all your help!

  JAW

• Links to the site fail on the local test server

  Using CS4/WAMP/XP, I have a test set up server. Everything works fine except that when I specify links to the site, on the testing server they not go back to localhost, localhost/Frances. They work very well on the online site, but not on my test server.

  This prevents me from using (and stable) "include" files for things like menus when parts of the site are in different folders.

  I have my setup of site as follows:

  Local news

  Name of the site 'FFG2009 '.

  Local root folder C:\wamp\www\Frances\

  By default the folder images C:\wamp\www\Frances\images\

  HTTP address: http://localhost/Frances/

  Test server

  Server model: PHP/MySQL

  Access: Local/network

  File of the test server: C:\wamp\www\Frances testing\

  URL prefix: http://localhost/Frances/

  In my Apache configuration file, I have a virtual directory that is set up like this

  Alias /Frances/ "c:/wamp/www/Frances / '.

  < directory "c:/wamp/www/Frances /" > ".
  all options + includes
  AllowOverride all
  Order allow, deny
  Allow from 127.0.0.1
  < / Book >

  I was informed that I could temporarily change the folder of Apache webroot on my record "Frances", but this stops other things like PHPMyAdmin to work. I also have other sites in my www directory and I don't want to change the rootweb Apache Directory each time I need to work on another site.

  Is it possible to set up my site in CS4 so that the root links site go to localhost/Frances rather than just localhost?

  Thank you

  Tone'z

  It's something I've had to do for some while now. Alias simply create shortcuts to a directory, they do not have their own directories 'Document Root'. I'm pretty sure you need to do is to set up a virtual host using WAMP (in fact, Apache, any installer is used). I'm almost certain that one of the books of David Powers cover the subject, but the one I apparently was already packed (moving soon).

  I followed the steps of http://blog.jlbn.net/?p=23 and it was quick and much easier than I expected. He missed for subdomains, but I found the solution quickly to the http://www.sitepoint.com/forums/showthread.php?t=394472 (I don't know why I didn't get it virtual host, but Google has gotten in the way :-))

  So now I have http://localhost , http://test.localhost and a true domain that I own (it's not hosted online) all running on my local computer.

  In your case, you might want to implement the subdomain http://frances.localhost so as not to cause interference with the actual domain name. Or make sure you have the server offline. If you don't know how to do this in the file httpd.conf, then in WAMP, it's two mouse clicks: WAMP-> put in offline mode. It is a good idea in any case

  Thank you for pushing me to learn how. It was high time that I updated in any case my installed WAMP.

  HTH

  --
  Mark A. Boyd
  Keep-on-Learnine :-)
  This message was processed and published by Jive.
  It will not be considered an accurate representation of my words.

• Links related to the root &amp; local test server

  Yesterday, I realized that I have to use links to the root in a SSI file included so that it would work from templates and pages in my main directory (or other directories, besides), for example, "src=/image/picture.jpg". However, as my site is PHP, in order to test the pages or even to use the Live View, I do use a server 'test '. I did it without much trouble using a package called EasyPHP, support that puts in place a local web server as well as the module PHP, MySQL, etc. It all works very well.

  The problem is that, in order to support multiple web sites, I have to use a "virtual directory" spec to direct the web server to the correct location of the files in my site. In the configuration for the test server, so I have to specify a URL prefix such as 'http://localhost/corinthian' of this particular site. Which worked previously, but breaks when using the root-relative links because the server see the "root" as the main directory "localhost" instead of "localhost/Corinthian. So now my SSI does not appear correctly because it is not resolved to the appropriate directories.

  I don't think it's fixable, unless someone else has run into it and can think of something I could try. Anyone? Break some of my code in a SSI was certainly more of a challenge than I expected!

  You have two options:

  1. Set up local virtual hosts.  I did and it works great!  See http://www.apptools.com for more information on how to do it.
  2. Make your root-relative links

  /whatever/whatever.php">

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.