Test Server Setup Help

Similar Questions

• The test server URL

  HI I'm under dreamweaver 9 on a mac and seem to have PHP/apache works well - poster test and PHP information page, but when I try to get a glimpse of a web page I get the following error
  
  Forbidden
  
  You don't have permission to access /~paulwright/phobiagone/TMP8M213JYFG.php on this server.
  
  I think I'm doing something wrong in the URL of the test server. Help, please! The files are stored in user (paulwright), sites, phobiagone and the URL to test that I put in is http://localhost/~paulwright/phobiagone/ , I also tried http://localhost/~paulwright/sites/phobiagone/ and no work
  
  Thanks for your help. Advice or assistance will be greatly appreciated as this is driving me crazy. Thank you

  Hi all

  Thanks for the help and advice. It turns out that I had to create a new .conf under my user name file and everything works now.

  Nancy, I'm on a Mac and it seems that the mac must have a ~ in front of the user name in the name of the test server.

  I'm just very happy to have work now after a long struggle, it is 2 simple things requiring a change and now all the work - I hope - looking good so fingers crossed

  Thanks again to everyone for all help you and time

  Best regards

  Paul

• Help with test server - Wampserver

  Hello

  I've just upgraded to Dreamweaver CC in Dreamweaver 8.  On attepmting to open a php page, Dreamweaver says I need to have a test server.  This is something that has confused kind of me, so I avoided to do.  Well, now I'm trying to set up a test server.  I'm learning!
  
  

  All my sites web design are kept in a file on my D drive, here:

  D:\Documents\local_sites

  I understand that although Wampserver wants to put me all my Web site files in:

  C:\wamp64\www

  I don't understand.  Why should I move all my files?  I want that they kept in my documents!  I don't want to move my files on the drive where are my programs.  I want that they kept on my data disc!      What should I do?

  
  Can someone explain this to me?

  You can keep them where they are and push the duplicates on your local server. New versions of DW will do this automatically backup the.

  Personally, I keep all of my PHP sites in the server itself to avoid the nonsense of duplication.

• Setting up a test server. Getting the error "Could not connect to MySQL". Help!

  First of all, I am a rookie at this, so please excuse me for leaving out some details.  In any case, I followed David Powers "establishing an environment of PHP for Dreamweaver development" set up my test server.  I tested the timetest.php file and everything works great.  I saved my website in its entirety and extracted its contents in my folder xampp/htdocs/php_test/CIM.  'CIM' is a file that I created to hold the content of my entire site.  I get an error message when I try to access my index.php file.  When I click on 'Live View', I get 'database error: unable to connect to the database: could not connect to MySQL'.»»  My index., is a php file in xampp/htdocs/php_test/CIM/public_html/store.  I too, started with Apache and MySql running XAMPP.  What I am doing wrong?

  If your timetest.php is like this:

  This page was created at 
  
   on the computer running PHP.
  

  So which proves that you have PHP work.  I want to talk in DW when you try to establish a database connection.  Based on your error page there is no connection to the database.  The screen I'm talking about is:

  

• The FTP.EXE program included in Windows 7 and Server 2008 help the PASV Mode connection

  What is the FTP.EXE program included in Windows 7 and Server 2008 helps to connect in PASV Mode?

  I ask because I had a strange experience with her. First, I will mention that I did hours of research and found many articles stating that it does not work in XP/2000/Server 2003, but I found nothing for Windows 7 or Server 2008.

  I found some people who kept him at work and others who could not. I tried with Windows Firewall turned off and will be on and firewall rules created. Others said it is not supported and that I should use a third-party FTP client. I could make it work in Internet Explorer and Windows Explorer. I am well aware of the situation these options in Internet Explorer.

  Here are the best real, I could run from the command line on my PC Windows 7 (32 bit), but not on Server 2008 64 bit.

  Now, before someone comes and asks me to check the firewall, I want to mention that I tried more than five clients of third-party FTP Server 2008 and they all worked perfectly. In addition, from the same Server 2008 it worked fine in IE and explore.

  On Windows Server 2008:

  FTP client blocked on: 150 opening data of channel for the directory list.

  Windows 7:

  C:\Users\wxk1>Systeminfo | b/findstr/c: "Name of the OS" / c: "Version of the OS.
  Name of the operating system: Microsoft Windows 7 Enterprise
  OS version: 6.1.7601 Service Pack 1 Build 7601

  C:\Users\wxk1>FTP ftp.secureftp - test.com
  Connected to ftp.secureftp - test.com.
  220 - FileZilla Server version 0.9.39 beta
  220 - Written by Tim Kosse (* address email is removed from the privacy *)
  220, please visit http://sourceforge.net/projects/filezilla/
  User (ftp.secureftp - test.com:(none)): test)
  331 password required for test
  Password:
  230 logged on
  FTP > dir
  200 port command successful
  Data channel opening 150 to the directory list.
  -r - r - r - 1 ftp ftp bookstore.xml 1471 25 June 2007
  -r - r - r - 1 ftp ftp 279658 25 June 2007 hamlet.xml
  -r - r - r - 1 ftp ftp 80641 25 June 2007 hamlet.zip
  -r - r - r - 1 ftp ftp 2164 japanese.xml 25 June 2007
  -r - r - r - 1 ftp ftp 0 July 3, 2007 the new text Document .txt (2)
  -r - r - r - 1 ftp ftp 0 3 July 2007 new document texte.txt
  -r - r - r - 1 ftp ftp 4677 25 June 2007 nutrition.xml
  -r - r - r - 1 ftp ftp 8463 pigs.xml 25 June 2007
  -r - r - r - 1 ftp ftp 7581 25 June 2007 plants.xml
  drwxr-xr-x 1 ftp ftp 0 subdir1 June 25, 2007
  drwxr-xr-x 1 ftp ftp 0 subdir2 June 25, 2007
  226 transfer OK
  FTP: 697 bytes received in 0.01Seconds 46.47Kbytes / s.
  FTP >

  Also, I do not install a server FTP PASV will be IIS 7 or anthing like that, just try to connect to a server FTP PASV. Here is the test server that I used:

  http://www.SecureFTP-test.com/

  Type	FileZilla
  Address	FTP.SecureFTP - test.com
  Opening of session	test
  Password	test

  Details on using

  Chilkat provides this FTPS test account for all those wishing to test the secure FTP client functionality. You can connect to ftp.secureftp - test.com, connect as a 'test' with password 'test' and download that all files present on the server. The "test" account can also retrieve entries in the directory. There is, however, no downloading files on the server.

  Hello

  The question you posted would be better suited to the Technet community. Check out the link and ask the question.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• "SQL server Setup has encountered the following error: C:/windows/installer/113c2fa.msi.

  113c2fa.msi

  When you install Sage Act! on my system, especially when you try to install any particular part SQL (installation was performed by Sage Act! technical support specialists) we receive the error message "SQL server Setup has encountered the following error: C:/windows/installer/113c2fa.msi. ACT! specialist technical support told us, it is a Microsoft problem that had to be fixed through Microsoft. Any suggestions?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  SQL Server 2008 - troubleshooting and Support | TechNet

  Hope this information helps.

• Display image in test server problem

  Hi all

  I added logo (image) House in my application.

  In my Local system, after the deployment, the image is display in the browser.

  But everything by deploying in the test server, the image is not displayed in the browser.

  I generated the EAR file in my local and deployed system in the testing server.

  I am using Weblogic Server 11 g.

  Please help me solve this problem...

  Thanks in advance.

  Vijay

  Once put on your image inside the folder public html and the path of the link like this - change /house.png
  ADF security applied in your application?

  Once clear the browser cache and check into the local computer, it does not appear correctly?

  Ashish

• Is it OK for the test server, and the server signs Local point to the same location?

  There seems to be three places where the files of my site: local files, server assessment and remote server.  I am happy with the remote server.  What I'm confused about are the other two.

  I understand that to build a site using mysql databases that I need to set up a test server.  Here is my configuration: Windows 10, CBWMS 2015.1 using XAMPP with the folder root of my site in htdocs.  I tested FormMail, hence the name of the site is formmail

  

  So, I open one of my files from the local files (right) Panel, modify it and it save (in the local files Panel).  I then use a preview in the browser to see my changes.  It seems that I didn't need to use was ABLE to move the file to the test server, because the file/s are already here, because as shown in the screenshot, the display of local files as the testing server view are in the same place.  What is the point of the testing server Panel?

  I know that I can put the Panel on the left with the remote server. This will allow me to sync with my ISP host.  If I put the left - and probably testing server Panel a sync is useless because the files are in the same place as the Local file?

  Maybe my setup is incorrect.  I guess my question is, is it OK for the test server, and the server signs Local point to the same location?

  Thank you gentlemen (and Lady!) I'll go forward with newfound confidence, Bravo.

• PHP test server on local network in Dreamweaver

  I have installed xampp on another computer and I can access that by putting the address in a browser. I now try to configure the test server on Dreamweaver. Is this possible to do? I look around on various forums and tutorials found for test servers on your local computer, but I'm willing to do it on the local network to another computer. The problem is that I don't know what setting to use sites to manage the area. Any help is appreciated, thanks.

  Use a flash drive to develop with other contributors on a LAN is a "unacceptable solution." Dreamweaver should be (and is) able to set up a local test on a local network server so that you can work on files with other contributors within your local network. See https://helpx.adobe.com/dreamweaver/using/set-local-version-site.html

  The local folder can be on your local computer or on a network server.

  Several developers working on the same site in a LAN is the main objective of check feature in Dreamweaver.

  Using Dreamweaver | Archive and extract files

  best,

  Shocker

• File not found: includes/common/lib/file_upload/KT_FileUpload.asp please download him includes / folder on the test server.

  The cooperative, I belong to have a home page made with Dreamweaver, several years ago. Some of the pages suddenly stopped working with this error message:

  File not found:

  includes/common/lib/file_upload/KT_FileUpload.asp

  Please understand that download / file on the test server.

  I checked, and the file is actually missing on the web server. What I have to buy Dreamweaver to download this file, and it is a path worth pursuing?

  Dreamweaver version: I don't know who or how to check this, could check if given appropriate instructions.

  The page you have shown uses one of the InterAkt extensions for Dreamweaver. Unfortunately, InterAkt was acquired by Adobe, which, in turn, did nothing with it. The latest version was about 5 years ago and was called uninstall.

  Maybe someone here can help you friends of Interakt: Home Page

• How to connect to your Remote Server when you have a test server?

  Hello world

  UH..., on my site, I have a test server and a remote server defined in my Site Set UP window, when I test the remote server by clicking on 'test' in the basic window, it says 'connected successfully', but when I open the files window to connect to my remote server and transfer files, it is said "test server" on the left column (all files are in red) and when I click the icon "to connect to the remote host" it connects right on the test server and shows all the test server to the files in the left column.

  How to connect to the remote server so I can up load files? Thanks for your help.

  See screenshot of the expanded files Panel.  The remote server icon is to the left of the icon of the test server.

  

  Nancy O.

• I have trouble to correct the configuration of the testing server in Dreamweaver CS4.

  Http error codes are 404 (open DW) and 12150 (URL test failed).

  Please see my responses below:

  Moore6931 wrote:

  Thank you for your help, but I don't understand.

  1A right now, I have change the web site locally.  When changes are complete, I copy the files to the remote server (Go Daddy), with FTP.

  Perfect. In this case, I won't even try to change you to use FTP in Dreamweaver under construction that will probably confuse you at this stage. In this case, go to "Remote Info" and make "None" - remove all credentials from here - we don't need configured in Dreamweaver if we do not use to it.

  2. because my changes are local, test files is local.  In fact, I normally disable the network connection, when I don't need open.

  Go to "Test Server" and make 'None' and delete all credentials - make it too empty. Given that you do not use the 'dynamic' services, we don't need to set up a. Your previews may occur through your browser to your "records the.

  3 go Daddy uses PHP on Linux servers for hosting.

  Well, Go Daddy also offers a variety of other options - but I guess you bought a configuration hosting Linux with PHP running on it. Let's not worry PHP here because you are using PHP for developing your site.

  4. because I'm not a fan of computer terminology, computers and computer configurations, I try to leave the default settings.

  The only thing you need to keep "like what" is your "local Info". Other than that, delete configurations of both 'Testing' and 'Remote '. You should go there without delay.

  5. I'm not sure of the requirement of test server.  A "dynamic" page descriptions are unclear to me.  My website uses,

  a. html,

  (b) a page of XML data to sort my photos.

  c. spry tables cascading,

  d. scrolling of the photo thumbnails.

  e. links to pdf files and

  f. contact email.

  A regular HTML site is usually "static" - as all the content you have in it is "hard coded" or "manuscript" in there. A PHP / ASP / JSP / CFM code is usually 'dynamic' - which means only the main template is usually done with the code. The content is retrieved from a database or from an external source. And this (to extract data from a database), such code must run on a server environment. This is the primary difference between 'static' and 'dynamic' Web pages. Do not enter into the details of what I'm not sure if this will confuse you more!

  If this is not clear, please see me website.

  http://envisioningmoore.com

• Test server for PHP

  Hello.

  I use MAMP and have successfully Setup a test server.

  When I make changes to a PHP file I am working in code view and press the Live View button to see the changes, I am presented with a dialog asking me to save the file.

  This can sometimes annoying me if I constantly small changes and they need to see the result. I was wondering if there is an option somewhere to remove the dialog box

  Thank you.

  Only way to turn off that would be to use temporary files.  Dreamweaver-->--> Preview in browser preferences--> box to preview using temporary files.  That should force DW to write to temporary files when previewing of pages.

• Doubts to duplicate a RMAN database on another test server

  Hello
  
  DB: 10.2.0.4
  Operating system: Aix 5.3 L
  
  I have the single server database and I want to duplicate other test server (AIX 5.3) database (10.2.0.4).
  
  My questions are,
  
  1) I'll have to take backup RMAN in Production , and then a move to the Test Server?.
  
  2) in the Test Server , I duplicate RMAN connection and database creation reason as follows.
  
  RMAN TARGET SYS/xxx@test SYS/xxx@PROD ASSISTANT
  
  RUN
  {
  allocate channel c1 DEVICE TYPE disk;
  DUPLICATE TARGET DATABASE to test nofilenamecheck. # test is my database to the TEST Server
  }
  
  The steps above from RMAN will work without RMAN backup in the TEST Server? If not, then how can create the database test without backup RMAN duplicate?
  
  
  
  My main problem is that I have enough disk space in my production server is saved and my database size is 3TO. My database is on ASM.
  
  
  I really like, if I have no response.
  
  Thank you
  Therese

  Yes, database of target duplicate of the active database is available 11 g.

  For 10g, you will need to take backup of primary education and take it all to the test and database duplicated just run.

  Hope that helped u :)

  Mark it as answered and close the question if answered :)

• mySQL real server test server

  Hi all

  I am aware of most of the people in this forum, it will be a simple question and very amateur, but im still pretty new for mySQL databases in Dreamweaver and connections etc.

  IV work on a site of e-commerce for several weeks and now it is ready to be downloaded and tested on its direct internet server, I have a domain with a database set up, I exported the SQL database in a word document and imported into the server for the database tables and forms generated in the new server etc..

  I've updated my site setup Dreamweaver so that it now points to the FTP where I download the pages and files as I usually do with websites non-base of data and that they have downloaded successfully. Where I am confused is to say my connection to now turn to the internet database, rather than the test server on my computer

  I would have guessed to change the database connection in the "Databases" Panel and entering in the new information, even when you enter new data, he finds nothing, but I feel I might have entered the wrong information such that it returns with an error. Whereas before information was

  Server name: localhost

  user name: root

  password:

  I feel im trying to enter the wrong information, if anyone can clarify what details I need to enter to make my connection point to my live database rather than my local server

  Thank you very much

  Andy

  Do not rely on the database Wizard in Dreamweaver to update your connection file. When you create a recordset in Dreamweaver for the first time Dreamweaver creates a folder connection with a connection inside .php file. This file is referenced at the beginning of the dynamic pages to connect to the database. Locate the connection file that Dreamweaver created for you, and change the settings there. Download the saved file to the same location on your server and you should be good to go.