I managed to install simultor but that I only see black screen

Similar Questions

• I tried to re start my computer when I did try to go back but there was only a black screen and it won't go in my log on page, or do anything else that, to go to safe mode, what's wrong with it? What can I do?

  I just got this computer and I don't want it to be a virus

  Hello

  If this is a new computer, you should contact the manufacturer of the system of support and/or whoever you bought
  calling blackscreens on the new equipment can be very serious. Not likely to contain a virus (malware) Although
  It is possible. More likely to be material questions and/or driver. The fixed under warranty. Black-
  the screens can be very difficult to resolve and more you do the more it will claim that this is something
  you did it.

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• I bought Adobe Photo and managed to install the App. It shows a black screen Uni without options below the cloud creative logo. Any help?

  I started talking to someone earlier and had to leave before they could help me a lot. I tried to open another cat, and he repeats to me restart my browser, even though I have several times. They said they would leave it as an open ticket, but I can't find any ticket system to respond or interact with.

  My problem has been resolved - I logged on via a different browser adobe support to return to support cat. With their advisor, I had to do a right click on the desktop select "configure switchable graphics" and assign them to "power saving mode" and it worked. When I restarted Adobe CC it worked.

• I bought creative photography cloud and I managed to install Lightroom, but I am unable to install Photoshop (which must be included in the package) - the question is that, in the creative menu cloud app PS is always the trial version (which will be ex

  I bought creative photography cloud and I managed to install Lightroom, but I am unable to install Photoshop (which must be included in the package) - the problem is that in the creative menu cloud soft PS is always the trial version (which ends in 3 days) and the only option is to click on the 'buy now '. How can I download the full version of PS cc?

  Hi filippof9777091

  Please try the following steps to resolve this problem:

  1. Rename the folder SLCache in SLCacheold, present at the following location:

  Windows: C:\Program Files (x 86) \Common Files\Adobe

  Mac: System/Library/Application Support / Adobe

  2. Rename SLStore file toSLStoreold, present at the following location:

  Windows: C:\ProgramData\Adobe

  Mac: System/Library/Application Support / Adobe

  3 Rename the OOBE OOBEOLD folder

  Windows : C:\Users\User name\AppData\Local\Adobe

  MAC: ~/Library/Application Support/Adobe

  Later, please try: connect and disconnect activate Cloud Creative applications

  Kind regards

  Rahul

• Hi I want to ad a person on my team, but that person only need to use acrobat to adobe, but I couldn't find this option

  Hi I want to ad a person on my team, but that person only need to use acrobat to adobe, but I couldn't find this option

  Hello

  Please see manage your cloud creative teams membership

  But you should join the support by call/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• I have service pack 3 installed and yet I still have a black screen with the message of counterfeiting

  I have service pack 3 is installed, but I still have a black screen with the message of counterfeiting. I am a beginner of the computer

  Hello

  (1) you are able to log the desktop computer?

  (2) when exactly you get the black screen?

  (3) you receive an error message on black screen?

  (4) have you made any changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, try the methods below and check if the problem persists.

  Method 1:

  In case you receive a black screen on startup of the computer, and then try the steps of troubleshooting provided in the link below.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  Method 2:

  If you are able to start the computer and you get the black screen at the level of the office without wallpaper then try the procedure described in the link provided below.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• my phone is turned on, but I get a blank black screen

  my phone is turned on, but I get only a blank screen dark I get calls but unable to answer

  Aamir110 wrote:

  my phone is turned on, but I get only a blank screen dark I get calls but unable to answer

  Press and hold home/sleep set button until you see the apple logo and then release, then wait for the boot device upward.

• whenever I start PC as normal, that it would take me only a black screen

  ORIGINAL TITLE: I need help with my computer

  My computer has windows vista installed in it recently whenever I start it as normal, it would take me only a black screen where there is nothing else than the mouse there.
  Is there a way I can fix without having to lose all my data?

  Use the system restore:
  http://Windows.Microsoft.com/cs-CZ/Windows7/what-are-the-system-recovery-options-in-Windows-7

• My computer is not properly wake up from its sleep, it is powered, but it gives just a black screen

  Well my pc sleeps properly the problem is when I press the power button to wake up to the top the power turns on and the green lights are on but it sends no signal to the monitor, so all I get is the black screen and the only way to put it back on is to make a vigorous reboot by pressing the Start button. either way, I have Home Basic windows installed on the same pc and I didn't have this problem, now I have windows home edition premium with service pack 2 and installed all available updates. any suggestions?

  Hello

  1st I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem
  and similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in
  Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network adapter power management,
  WiFi, Modem and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  ==========================================

  I would also update the main especially video drivers - check again the power management
  Settings after installation.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Pavilion dv6 - 3227cl laptop entertainment puts but has only a black screen

  HP Pavilion DV6 - 3227cl Entertainment Notebook, which is about 2 years old and works on Windows 7 Home Premium, AMD Vision Premium, will to power, but not start.  The fan works and the "caps lock" flashes once approximately every 4 seconds, but all I get is a black screen with no error message or the cursor.  There are no beeps.  The power led lights (white) for about a second, then turns to a dim orange when the battery is installed, but remains white when the battery is removed.  However, the two lights (I'm not sure what they are for) next to the nearest port USB power light lights up as follows: one on the left (as you are looking at the right side of the laptop) is white; the right one is orange.  Both are fully illuminated, (not vaguely that the power light).  The power light is not as bright as the other indicator white located near the USB port.  The laptop started and seemed to be running once since this problem started, but I was not able to start again.  I'm told the battery is bad (it's my brother in law book), but it is possible that the problem is with the power source rather than the processor or motherboard?  I appreciate your comments/advice about this.  Thank you.

  Hi fejevitzky,

  Your question, "according to that, I think you're telling me you don't think it's the BIOS - is that correct?" Yes, as long as you don't see any "white" light reveals LCD bezel back while with the State of the white screen. Bezel LCD's coverage around LCD, most design put modeule LED in the lower corner next to the LCD. While the backlight is not during the boot sequence, which means system doesn't have chance to get BIOS current enforcement program. It also means, he stuck to the condition of the equipment to set up. Normally this motherboard related.

  Quickly, I checked hp.com and found a link that may help. Or 1-800-HP-invent (1-800-474-6836) can save time. This forum only intends to answer fast/just the users questions. On another charge of repair and maintenance, I have to give you other links to achieve.

  HP Partner and Store Locator: (I try to search for your city, but it does not work well.) Suggest that call you for a quick response)

  http://WWW8.HP.com/us/en/store-finder/index.do

  Contact information:

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

  Contact HP:

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  HP SmartFirend Services: (I saw with the price of the service)

  https://h30617.www3.HP.com/HP/home/index.asp?JumpID=in_r11682_us/en/HHO/PPS/suppgateway_gi_ob_ds_pd/smartfriend_cc/DT

  Thank you very much. If you think that my answer helps your product, please help to close this case once you feel comfortable. Then, click on "CONGRATULATIONS."

• My Acer Aspire 571 e5 allows me to connect, but then I get a black screen and I see my cursor

  Hello

  So my Acer Aspire 571 e5 which ive been using for about 3 days just had a windows update. Now, it starts well but I get a black screen when I connect. However, some programs are always able to see and popup randomly. I also tried to go into my bIOS, but it asks for a password that I don't know.

  If you press CTRL + ALT + DELETE you are able to open the Task Manager?

  or try this:

  (1) once you are on the screen of login password, press on and hold down the SHIFT key and click on the power icon (lower right corner of the screen) and restart your computer... (Remember do not type a password)
  (2) you will get advance options. Click on troubleshoot---> advanced---> start---> restart settings---> and select SAFE MODE WITH NETWORKING

  (3) once in office in safe mode, open Device Manager, click on the video card, right-click on it and choose unisntall

  (4) restart and check if it works

• Cannot install the Bootmanager from vista DVD patch (black screen cursor white)

  Hello

  I started getting an error of e/s on my computer toshiba laptop l305d-s5928

  I went to my local computer store and got an installation disc, so I could repair the bootmanager.  (I watched the error message about this).

  I inserted the disk and booted from it.  It loads the files, displays the microsoft name and logo with the scroll bar, and then I get a black screen with white cursor. I can't understand what it is.  or what to do.

  Any ideas?

  EDIT: ntfsfix on Knoppix was not able to fix it.

  Hello

  Thanks for the post. Unfortunately, the question you have posted is not clear. Clarify these issues so that we can better understand the issue.

  a. Why have you tried to repair the Boot manager?

  b. What is the error that you have tried to solve the problems?

  c. the disc that you used is a disk drive or repair facility?

  d. were performing a clean installation or a repair (Custom) install?

  Provide more information so that we can better help you.

• Windows starts, but does not charge not (black screen with cursor)

  [Sorry for the long post, but I feel the need to explain my situation]

  I have the following problem:

  I turn on my PC, and Windows shows it is normal loading screen, then it goes in a completely black screen, with just the mouse in the middle. By the size of the cursor, I can say that it is in a low resolution, probably 800 x 600 (compared to my usual 1920 x 1080). I am able to movements of the mouse, but with no particular purpose without something to click on. No other keyboard input seems to work, except for press SHIFT 5 times, which shows the keys dialog box to self-retaining (with just 'yes' or 'No' options, no other connection); and Windows key + U, which shows the ease of access Center. CTR + Alt + Del does NOT work.

  So far, that's what I tried (in chronological order):

  1. Start in Safe Mode, Safe Mode with network, safe mode with command prompt Mode, start low resolution video, last known good configuration: all give the same result as to start normally.
  2. Repair of your computer:
     1. Startup Repair: find the registry errors (I realized and fixed this more later on)
     2. System Restore: did not find any previous restore points (I know with certainty that there is, I took the habit of making regular restore points).
     3. Windows memory diagnostic: not found error.
     4. Command prompt:
        1. Ran the command chkdsk /f r, has no error report.
        2. Ran sfc/scannow: I don't remember the exact report, but he asked to restart the computer to complete the repair of the problems. I rebooted and ran the new order for the same result.
        3. Forced the scan with: sfc/scannow damaged = c: \ /offwindir = c:\windows, concluded and repair errors, not always not load windows.
  3. Ran Dell Diagnostics start, found no errors.
  4. Startup Repair ran found once again the registry errors. I found the solution to this in a forum for Microsoft Help ( answers.microsoft.com/.../f77d5355-b8be-41d6-af24-cae994e1768f ) and fixed the problem. I rebooted, but the problem persists.
  5. Startup Repair does not detect now no error. I tried restoring the system again, we find 2 restore points dated AFTER the beginning of my problem. I decided to restore it in any case, but none of them worked.
  6. I ran Windows Defender in offline mode:
     1. Quick scan: and found 2 threats and remove.
     2. Full system scan: found 4 more threats, removed 2 of them, the other two could not be removed because they were in an ISO file.
  7. I've tried steps 1, 2 and 3 with no luck.

  With every step, I am aware that I am closer to having to reinstall Windows, then I decided to see if I could still access my HD to save my personal files. I did a live Linux CD (with Ubuntu), but I have a problem of mounting the readers, because they are in a RAID0 configuration. "sudo dmraid s" gives the following error: "ERROR: Sie: number of devices in RAID wrong value"isw_dbdffjficc_ARRAY0"[1/2] on/dev/sdb.

  Important details:

  I changed my graphics about 4 months ago (a 750ti of Nvidia GTX for an ATI Radeon HD 6450), and told me that I can run short with the power supply. The new card requires a minimum of 450W, and I think that my diet is 460W. This may or may not have something to do with this question, I have no idea.

  My 2 hard drives of 500 GB RAID0 configuration has brought me a lot of problems of the day 1. One of the HARD drive would be randomly (I am able to hear a clicking sound different when this happens) failure and the computer would break. At the start, he would ask a boot device. The Dell boot utility would then recognize only 1 readers, but would end without errors. After a reboot or two, everything would be fine and would be boot windows normally (apart from the usual error recovery screen) with no sign of corrupted data or anything. As I said, it happened are the arrival of my PC, but restarting a couple of times still attached. From now on, the two HD seems to work very well, the Dell utility recognizes two of them and found no errors in one of them, and I can access any directory from the command prompt.

  Is there anything else I should try before reinstalling Windows?

  Before the installation, I really wish I could recover my files (I have important documents of the College), is it possible to do this?

  Sorry again for the very long post (and for any errors of language, English is not my native language) and thanks in advance.

  Since you have not yet had your data readers. I recommend a Windows installation without formatting the drive... I don't like this solution, but at this point, you have probably tried everything.

  Use a reinstallation of Windows 7 installation DVD, make sure that you select...

  Select custom: Install Windows only (Advanced)

  

  If you do not select one of the route options and everything simply highlight the largest partition and click Next:

  

  Windows will dump all the old Setup files into the Windows.old folder

  

• Just bought a msi gtx 750 ti OC edition.when installed does not start, ends with a black screen and the cursor

  As indicated in the title, I bought a ti 750 gtx.

  N750Ti-2GD5/OC

  The machine had a 620 in gt and works very well with it in. When I install the ti 750 gtx, however, the boot system hangs on a black screen with cursor / underscores and a single beep.

  The system is a h8 1203, with a power of 460.

  I also have a gts 250, that also installs and works fine. Ive read a little, and there is a problem with this map and the hp system? something about the type of bios? I couldn't quite follow what has been said.

  Hello

  If you upgrade to Windows 8 (UEFI-mode Setup) and apply the BIOS posted updated so you should be able to work to the video card.

  Don't forget to create a set of external support of HP recovery before installing a new operating system.

• XP shows the MESSAGE about how to start, but then stops at a black screen with cursor

  Today, instead of start normally, my Dell displays the usual POST screen, then a black screen with a cursor blinking (dash). He is not following the XP splash screen. After the machine is turned off and restarting, I pressed F2 repeatedly and eventually got to the configuration of the system. Then I pressed ESC and exit, and the machine starts normally on the desktop. This has happened 3 times since. Social site from Microsoft suggests that the master boot record has been damaged, or that the NTLDR file may be missed. Anyone know how to check this?

  hunty7,
  Take a look at this article.  He explains a situation similar to yours and gives the troubleshooting steps.
  http://support.Microsoft.com/kb/314503

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.