Satellite L300 PSLB8A display, only a black screen
Hi guys
Please help if you can; This morning I turned on my laptop (Satellite L300 PSLB8A-04R004 running Vista family) and all I get is a black screen.
I tried removing the battery and turn on while plaugged in the power supply, same black screen.
I tried to remove the battery then replace after 10 minutes, but the same black screen. All the power lights are on (but non-corps House).
I tried everything suggested in support on the site page, but thought that you guys might have the answer?
Thank you.
> I have tried everything proposed in the support on the site page, but thought that you guys might have the answer?
Seems that you have already tried a workaround solution that I would recommend.
Disconnect the power adapter, remove the battery, wait 1 hour or more.
Reconnect the two parts and then try to switch on the appliance.
If that does not help, then you might try to start the device using a single module of RAM.
Maybe it's a question of s a RAM...
Otherwise it s necessary to test the material parts and run diagnostic checks.
This can be done by a Toshiba ASP.
Tags: Toshiba
Similar Questions
-
test the application on the device displays only a black screen.
Hello
I've created Hello world app, app works fine on the Simulator.
But when I install this application on the device and the launch of devie it shows only a black screen. I'm not sure what is the reason for this.
Device that I use is Intex clouds fx.
Everything here in the face of this problem?Thank you
Hi @bhuvan
I solved this problem by adding this css on my html page.
HTML, body {}background: white;
}
For some strange reason, app is running but watch entirely black screen.
Jan Jongboom has helped me to fix this problem, I asked this question on stackoverflow so... Here is the link to this question.Hope that this tip will solve your problem as well
-
Satellite L300 - 17l - no HARD drive & black screen when trying to install XP
I just bought a Toshiba Satellite L300 - 17l no operating system on it.
I tried to install xp, but after the initialization of the installation was told he not found any hard... and press F3 to exit Setup.And now I can not install anything, because when I turn on the laptop it seems just a black screen
:( NEED HELP... PLEASE...
All you need to do is install XP that contains SATA drivers. The XP you are trying to install does not contain them is why it does not recognize your hard drive. If you can't find Xp with SATA drivers, you can create your own drive to install XP with SATA drivers in a few steps:
(1) download nLite
(2) download the SATA drivers for your laptop from the Toshiba site
(3) find Xp installation (normal that you use for your PC)
(4) start nLite and it will tell you how tointegrate the SATA drivers in the XP installation
(5) burn the installtion disk
Install XP on the laptop to 6) -
Satellite A105-S4274 has only a black screen
Screen saver burst on the laptop and I closed it.
Open it back up and the screen is blank.
It starts at the splash screen and stays black. I can boot into SafeMode ok. I guess it's a video thing. I have the chipset for the installation, but I get no info in the settings of the card, only this...
chip type: not available
DAC type: unavailable
memory size: not available
channel of the card: not available
BIOS information: not availableWhat is going on. I'm doing something wrong? Thank you
Hi mate,
you said screensaver is appeared and firm. This means, after the loading of the screensaver, your computer crashed? Then you the switched on again ("Opened it back up and the screen was empty.") and no photo was available.
Moreover, operating system you have? Please, give a better and a MORE DETAILED description since it s impossible to solve a problem without any information. What do you have before the problem happened? You have installed some new software/drivers/etc and so on.
I'm waiting for your answer.
Welcome them
-
Premiere Pro CC - program monitor displays only a black screen
Hi all
I hope there, can someone help me (and I'm sure many others) with this problem.
I used the first Pro CS6 and was at Midway through a project when I upgraded to first Pro CC. It was very good and I finished the project, however shortly after this when I re-entered Premiere Pro CC to make some final adjustments and settings, the program monitor seems to be black. I see nothing but black on the monitor of the program window. When I play the project, the sound works fine, but I don't see anything in the program monitor.
Please see the discussion linked here (
) for more information on this issue. I'm hoping to turn the heat on it and get answers for everyone having this problem. She made my first Pro useless right now. I can't yet start new projects because it has the same problem.NOTE: I tried to roll back the CS6, but it does not work and I discovered this forum that roll back versions has never been possible. I also tried to reinstall CC PP but that does not solve the problem.
I hope someone can help here.
Thank you!
I hope never auto-updates for nothing! I went to Nvidia.com and found a driver for your 5200M last month, try this - http://www.nvidia.com/object/quadro-notebook-win8-win7-64bit-320.49-whql-driver.html
Thank you
Jeff
-
Dear Sir, I am unable to see you tube to Firefox browser. hearing is only audio. black screen is displayed. I can see it on other browsers. Please notify.
However, I can see thumbnail when I move the mouse over the timeline of the video stream.
concerning3 Paz,
If you can't update your graphics / video driver, try turning off hardware acceleration.
-
Satellite L300 PSLB8A - Webcam failure when installing Vista SP2
Hello
Since I've updated my Satellite L300 PSLB8A 047004 to Service Pack 2 of Vista there was a dialog box that is displayed at startup reported that the driver of the webcam has failed. Everything else is Ok.
When I searched in the Panel of control-> system area and select the menu option to find the newest driver, it was reported that the latest driver is installed.Anyone can help please, would be much appreciated?
Best regards... KeV.Hey Buddy,
I think you need to reinstall the webcam driver and that should be all...
You can download the latest driver for the webcam on the official website of Toshiba.But I recommend to remove the old display first driver. This means that you need to check the control panel > Add/Remove programs for the old software assistant camera. Uninstall and restart your laptop. After that, it should be possible to install the latest driver of the webcam works correctly.
-
I managed to install simultor but that I only see black screen
I see not all contain on the Simulator
only see black screen, what is setting for it
now I am able to see the display screen
After logo Blackberry now I am able to see the screen
-
Webcam on Satellite U500-17 x only shows black photo
Hello
I bought a portable 17 U500 x about a month ago. I'm on Win7 64 bit version that came with the pc.
The webcam worked perfectly in the early days. Then I didn t use it for awhile and now it only shows black picture on webcam of Toshiba, msn or Skype software, all have the same problem.
I didn't change any setting of the device. they have all of the default settings. The blue led on the side of the camera turns on but only a black screen.
If I use the software Toshiba cam and try to take a picture it says "failed to capture the photo.
On "Device Manager", the tab for imaging devices shows usb 2.0 uvc webcam without error and with the updated drivers. I get no error at startup or when opening the cam applications.I got drivers win7 European Toshiba webcam website "20091112111752" and them again after uninstalling the cam Toshiba Software I had installed. Also reinstalled the device of face recognition.
The problem persists...Any idea?
Best regards
Hi Costa
It is not easy to say what the problem is here. All that you have done is just but I think it's time for a more radical, but also more effective solution (test). Reinstall the operating system and test the features of cam with the factory settings.
It should work again. If it's not... maybe service?
-
Re: Drivers Win XP for Satellite L300-PSLB8A - 0d 5004
Hello...
Recently I did something stupid... to install windows xp on a windows vista computer...
Anyway, Ive a messed up but now on this windows xp Toshiba Satellite L300-PSLB8A - 5004 0d I'm missing some drivers... I was wondering if someone could give me the correct driver links so I could download them please...
the following drivers are missing:
_ * ethernet controller: * _ PCI\VEN_10EC & DEV_8136 & SUBSYS_FF661179 & REV_02\4 & 38F101EE & 0 & 00E0
_ * ethernet controller: * _ PCI\VEN_168C & DEV_001C & SUBSYS_7128144F & REV_01\4 & 318470AD & 0 & 00E1
_ * device on high definition audio bus modem: * HDAUDIO\FUNC_02 & VEN_11C1 & DEV_1040 & SUB _ SYS_11790001 & REV_1002\4 & 1760F043 & 0 & 0101
_ * Video controller: * _ PCI VEN_8086 & DEV_2A43 & SUBSYS_FF671179 & REV_07\3 & B1BFB68 & 0 & 11
_ * Video controller (VGA compatible): * _ PCI VEN_8086 & DEV_2A43 & SUBSYS_FF671179 & REV_07\3 & B1BFB68 & 0 & 10When I go into run and type msinfo32 then expand the items and check problems for ethernet controllers it says that this device is not configured correctly and for the res, it tells the drivers for this device are not installed. There is also 1 * not AVAILABLE * uninstalled car door a PNP ID number if someone wants.
Please can anyone help... I urgently need these drivers...
This will help you to identify the device and to get good drivers:
[How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]But at first glance, it seems that you have need of a driver for the graphics card, modem, LAN and WLan driver.
-
Satellite L300 PSLB8A - Australian driver download page is lazy
"95 drivers found for Satellite L300-(PSLB8A)"
There are many aspects of the idiocy that might lead to this declaration, the main being:
* You do not follow your model numbers despite going to the effort to put big stickers on all the products you sell.
* You use numbers of different models in different regions of the world which means that I have to find the right site of Toshiba, before that I have no chance of finding my (Australian) model.
* Your web developers are too lazy to set up a simple filtering so I can refine the selection of downloads.
* Your Cree support site to find support right but no has no connection of "drivers", as you don't want to give them in the first place.
* Even once, despite having the exact model COMP you have no idea of fscking this real piece of hardware I cling.I have to deal with support sites almost every day and you are the worst I've seen for some time. I sincerely hope that I don't have to support another Toshiba in the near future.
Hello
You are right. Satellite L300-(PSLB8A) seems to be an Australian for Toshiba laptop model and usually you have to download the drivers for Toshiba Australian page.
But there is also the same model in Europe for laptop Toshiba Satellite PSLB8E.
I think that it of not really different Australian brother. So, you can also use the European driver of Toshiba page to download driver.http://EU.computers.Toshiba-Europe.com/-> support download &-> download drivers
This page is very nice and clear. You can choose the laptop model and you can search for different operating systems. So you won't have any problems to find the right tools and drivers.
Cheers mate
-
whenever I start PC as normal, that it would take me only a black screen
ORIGINAL TITLE: I need help with my computer
My computer has windows vista installed in it recently whenever I start it as normal, it would take me only a black screen where there is nothing else than the mouse there.
Is there a way I can fix without having to lose all my data?Use the system restore:
http://Windows.Microsoft.com/cs-CZ/Windows7/what-are-the-system-recovery-options-in-Windows-7 -
cannot re start my system by getting only a black screen with recovery of window failure
original title: do not re start
I have a dell inspiron laptop and tried to install windows7 vista upgrade, since, so I can not re boot my system by getting only a black screen with insufficient recovery window, I followed the instructions on the screen to re-boot without success, and when I insert the disc of the operating system for re install nothing happens, Pls help TKS.
MyrnaHi myrnaspiers,
1. What is the exact error you get when you try to start windows.
2. what type of installation you have done, it's a custom Setup or an upgrade.
3. check if you have the option to go back to the old version of windows.
I suggest you follow the link to black screen when I start Windows 7 below.
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7
I also suggest you start in safe mode.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
If you have not used the repair which is a system repair option in Windows vista start DVD, you can use it and check if the problem persists.
To open the Startup Repair refer
http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem
For more information about the Startup Repair, refer
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
-
I downloaded the trial of the creative cloud vision. But why does the application display a completely black screen?
I can open the CC but I don't see anything in it.
I downloaded and months before photoshop. I still see something at the window right there.
But now, I see the dark window. So I couldn't download the Adobe Illustrator.
Please help.
Hello
Please see the thread below where this issue was discussed:
Re: screen creative black cloud
Kind regards
Sheena
-
Satellite L300 has only a black screen and will not load.
Mobile hit child around keys shortcut if, Esc, cap locks, fn etc loading upward on the web, top computer laptop has black screen and then tried to load up.
See screen for a moment and then is become black and now the laptop starts but the screen is black and nothing else happens.Can someone help
Thank you
Tony.Hello
You mean that you are not able to access the BIOS?
Have you tried to use the FN + F5 key combination to switch to view different devices? Select this check box. Maybe the output display has been switched to external monitor? :|If nothing will not help to remove the battery and disconnect the portable AC.
Wait for about 1 hour then reconnect both sides and try to turn on the laptop.
Maybe you are looking for
-
El Capitan 10.11.5 update slow SMB (bug)
Since I upgraded my Macbook Pro retina 2015 to 10.11.5 SMB transfer speeds to my Synology NAS are not go faster, then 25Mbit. When I use AFP I get 110Mbit speeds on my nas. A Mac Mini which has 10.11.4 and the SMB and AFP tested speeds are good 110Mb
-
About 1 month ago received the message "Server error" sync a new device (Virtual Machine), I'm sorry, but I did not copy the exact message, but remember you that the notice was to try later. Long story short, after 3 days worth of 'try later' with th
-
OfficeJet 7110: activation web service HP 7110
Unable to enable web services on HP Officejet 7110. I tried all the usual suggestions, reset printer, reset the router, set manual DNS, etc., maual IP address. Printer works flawlessley in 802.3 or 802.11 mode. IP v4 active, disabled v6. Can ping an
-
How to restore a game that has been deleted
original title: I had games, but I think I accidentally deleted. Is it possible for me to restore the games? How can I restore games?
-
How to stop the series 'VISA read' the sends packets instead of bytes available.
Dear Labvillians, Highlights: How can I stop series "VISA read" send me packages rather bytes? Background: I have a system which publishes series of 14 bytes on a semi-regular interval packets. At busy times, the producer of these these queues of dat