Test the connection to the device

Similar Questions

• Drive DVD-ROM 37 error message Code in the Device Manager on Satellite M30

  Hello

  I'm new to this forum and I wonder if anyone can help? I have a Satellite installed 30-106 M which has the above CD. At present, it does not work when I go to Device Manager, the error massage that I have is that follow 'Windows cannot initialize the device of this hardware driver. (Code 37) ».

  Can someone offer me some advice please.
  Thank you
  Trevor

  Hello

  I studied in the Microsoft Knowledge base, and it seems that this error is displayed because the driver returned error in her routine to the driver entry.
  I think that you need to uninstall the driver, and then click find the hardware changes to reinstall or upgrade the driver.

  You can do it in Device Manager. Otherwise, you can remove the drive in the Device Manager list and after restart of the new mobile operating system should recognize the drive again.
  After this procedure, you should test the device if it will work.

• Is it possible to prevent the device restarts when I deploy an application?

  Hello

  Whenever I have deploy an application on my device (Blackberry 9780, OS6.0) to test the device restarts. Is it possible to deploy without having to go through this lengthy process?

  Who knows what is happening behind the scenes!

  There are simple things, like the establishment of the correct size at startup icon, which will mean that your device needs to restart after the installation.

  Since I believe PhoneGap and WebWorks are about you, you can get an answer on the forum WebWorks.

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/BD-p/browser_dev

• iPod 120 GB Classic is recognized by iTunes, but it will not be synchronized. I ran the diagnostic. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, it says that no device was found. It didn't Sync befo

  I have a version of the software running iPod Classic 2.0.4 of 160 GB. The iPod has not been synchronized for more than a month. I did diagnostic tests today. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, he said that there was no iPod found. I checked and installed new updates, but it is not always sync. I restarted iTunes and computer, but it is not always sync. I ran a diagnostic on the device and it showed that it was operating normally.

  The iPod must be configured to synchronize automatically.  If this is not the case, click Sync does not synchronize no matter what.

  Select the iPod in iTunes, so that you see the iPod settings screen in the iTunes window.  Along the left side of the window, in the sidebar, under settings, click on music.  To the right, you will see a settings screen of the iPod music , where you tell iTunes how to sync songs to the iPod.

  NOTE: All the songs on the iPod that are NOT in your iTunes library (on the computer) will be lost.  If all the songs are in your iTunes library, no problem.

  At the top of the window, check the box to Sync music.  This enables automatic synchronization.  Below, select the option to synchronize library of ensemble music, if you want to 'all' in your music library to sync.  At the bottom, click on the apply button.

  From now on, when you make changes to your iTunes music library (like add new songs or update a playlist), iTunes automatically updated the iPod with the same changes when you connect (or click sync , if already connected).

• Adding a device:-201401. Make sure that the device is connected?

  I was able to set up my Explorer Measurement & Automation to detect my device (NI cDAQ-9188), but I'm unable to add the device.  The error statement says:

  Add the device failed.  From the device driver error report is as follows:

  Add a device

  -201401

  Recovery of the properties of the network device failed.  Make sure that the device is connected.

  How can I fix this so that I can test my modules e/s?

  DAQmx version: 9.7.5

  Operating system: Windows 7 64-bit

  Initially:

  In the tab network adapters, it reads:

  -No network adapters found

  In the tab of the firmware, it reads:

  -firmware version: 1.1.0f0

  Based on the status of the network configuration tab, I assumed that my problem was related to the network connection.  I have reset my network cards and this seemed to solve my problem.  Thanks for your help.

• Need help to test the VISA interactive Control: Sorensen XBT32 - 3FTP USB connection problem

  Hello

  I use Windows 7. I installed the USB driver provided in this link:http://www.sorensen.com/products/XBT/XBT_Downloads.htm.

  Max is on the ASRL5: COM5 series & parallel in the Device Manager it is listed in the port: COM5

  I don't know how to test using VISA interactive control to ensure that the connection is established.

  Here are the parameters:

  Serial settings:

  Baud rate: 38400,

  Data bits: 8

  Stop bits: 1

  Parity: None

  I use the default settings for the other options such as flow control: none, Timeout = 2000ms etc.

  In the attributes view tab:

  Attribute: is the connected port

  Current value: error VISA: (Hex 0xBFFF001D) the specified attribute is not defined or supported by the referenced resource.

  I don't know if it's important.

  When I write * IDN? \n (bytes to read: 6), I return the Count: 6 bytes

  When I click on "Read Status Byte":, I get the following error:

  Error reading STB operation VISA: (Hex 0xBFFF003A) cannot start the operation because the installer is not valid (because of attributes defined in an inconsistent state).

  If I click on "Query", I get the following error: reading operation error VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  I also tried to create USB raw driver help driver of VISA Assistant. In this case I kept getting timeout errors: read operation error VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  Can you please tell me what I'm doing wrong?

  Thank you.

  Who cares about the number of bytes written? And configure the windows com port is not relevant. What is important is how you set the com port in the VI or max.

• The device or resource (127.0.0.1) is not configured to accept connections on port "The World Wide Web (HTTP) service".

  Hello

  I just deploy the tomcat in windows server 2008 and to test whether it is installed correctly. When I opened the IE9 and type in http://localhost: 8080, he goes to the homepage of tomcat successfully. However, when I slap http://127.0.0.1:8080, it shows that Internet Explorer cannot display the webpage (normally, these two methods are the same for the homepage of tomcat). Then I try to diagnose the connection problem. The problem found is - the remote device or resource does not accept the connection. The device or resource (127.0.0.1) is not configured to accept connections on port "8080".
  Then I tried the same procedures in my own laptop, there is no problem. So I wonder if there's some features are disabled on the windows 2008 Server. Can you help me?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forums. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/categories/

• "This USB mass storage device can transfer information faster if you connect it to a USB 3.0 port Superspeed ' when the device is already connected to a USB 3.0 port.

  I just bought and installed a USB 3.0 card. It is the Startech PEXUSB3S2 PCIe card. I installed the card in a PCIe 2.0 X 1 slot. The manual says it's exactly the slot, that it supports.

  The Manager device displays NEC Electronics USB 3.0 Host Controller and NEC Electronics USB 3.0 Root Hub are installed and are working correctly. I have a Thermaltake BLACX5G 5 G USB 3.0 hard drive caddy. The transfer rate is only 35 MB/s using the HDTune benchmark. It is a USB 2.0 speed.

  When the player is turned on, windows displays the message "this USB mass storage device can transfer information faster if you connect it to a Super speed USB 3.0 port»

  For some reason, the system doesn't see the caddy to drive USB 3.0 as being plugged into a USB 3.0 port, when it actually is.

  I remember having this same problem with Windows XP, when I bought a USB 2.0 card. The only thing that fixed it at the time was upgraded to XP SP2.

  This should not be a problem because I know that Windows 7 pro 64-bit supports USB 3.0.

  My motherboard is an ASUS P5QL-EM support an Intel Core 2 Quad and 4 GB of DDR2 memory. According to the manual owner the PCIe x 1 slots support architecture 1.0 and 2.0.

  Edit: I just tested the external hard drive and expansion card USB 3.0 on my motherboard Gigabyte of friends running Windows XP. Everything worked perfectly, no problems at all.

  Here, there is a problem with Windows 7 or the motherboard. Still unresolved, currently installs a floppy drive so I can update the firmware of my motherboard.

  I checked the implementation of the card several times, removed and installed in another motherboard to test, then removed and reinstalled again in my motherboard ASUS check several times for a fit course.  It still does not work. I have just completed update the firmware of the motherboard with the latest version, and I also did a new install of Windows 7, install the drivers USB 3.0 immediately after installing Windows over. None of this solves the problem.

  I'm running out of ideas on how to fix this without doing something drastic as a replacement for my motherboard. I don't want the speed of USB 3.0, but I don't think I'm ready for an another two or three hundred dollars to get it.

  I've been all over the ' net trying to find a solution and read tons about USB USB 3.0 specifically and in general. I can find no reason why the drivers would install and report that they are working correctly, but fail to connect to 3.0 speeds. I think that this would generate a certain type of error instead of such a strange symptom.

  EDIT:

  Here go us. I knew that is was a bad idea to buy one main (ASUS P5QL-EM) card that had to be overclocked to 1066 MHz for DRAM memory. I did all this work, and every time I reset my BIOS or updated it would always be the frequency DRAM back to where it should be (1066). After a reset of the computer was the starter and I just let it start instead of setting the DRAM frequency and, suddenly, USB 3.0 card worked perfectly. I confirmed this by setting the frequency to 1066 and looking at the USB 3.0 card fail again. I guess it must have something to do with the clock being sent to the PCIe bus.

  In any case, the USB 3.0 card works perfectly and gives me a transfer rate HD Tune to 99 MB/s on a drive from WD SATA 7200 RPM and 86.1 Mbps on a Samsung drive hard 5400 RPM / MIN 3,5 "SATA. These are the same reference points I get when these drives are connected to my internal SATA connectors. I'd say USB 3.o works perfectly now and maxing out the hard drives performance.

  Thanks for any help.

• Test the application on a device, 8130 with no cell service

  This is my first post. Thanks for all the help I got already the search of this forum.

  I have an application that communicates with a web service over https.  It works fine on the Simulator and now I'd like to test it on a real device.

  I have a 8130 which had once been on the Sprint Network (no SIM card) but no longer service the active cell.  I would like to use as a testbed and potentially also collect other templates, but I don't want to have a service contract carrier of cell running on all my test devices.

  When I connect the 8130 to the PC with the USB cable, I can download my app and run it and even debugging, but the service book has no entries and the application cannot get to my intranet.  If I run the browser on the device, it says "your device has no entries in the directory service configuration is any browser"

  I tried to run the Desktop Manager and MDS Services Simulator.  They did not provide for any connectivity.

  What is the trick to provide similar internet/intranet connectivity to a physical device of Blackberry via USB without going through a cell phone

  the contracts? Is this possible?

  I don't have a BES.  Do I need to configure a BES in a test configuration?

  If this is not possible then how are you guys test your applications on a variety of actual devices?

  Thanks much for any help.

  Bill

  No matter what the mechanism of connection is used, you have only two original ways

  (1) thanks to a plan by the carrier data...

  (2) thanks to a WiFi hotspot...

  If your test device only supports WiFi too, so sorry you can not test...

  See you soon...

• On the tests of the device - should BB be activated or unlocked?

  I know it's a fundamental issue, but we seek to test our apps on multiple devices in the most advantageous solution.  Applications require no gps or data connection.

  If you buy a Blackberry to opportunity (of an individual, i.e. from Ebay or Craigs list), must it be unlocked or do you need to activate it in order to load applications from your computer using the USB key?  Can you simply delete and reinstall the OS and be good to go?

  I know that Verizon doesn't require sim cards, but you can use the device without any connection?  How about is AT & T - possible to use the device without a sim card?

  Thank you.

  Yes, for example I have a 9700 and 9800, or who have a SIM card and they have not been saved on the network, but since both have WiFi, I can download OTA aspects and application testing - for example, GPS connectivity requires no network connectivity. IIRC, I got hack the 9700 with a full special book to get the browser via WiFi connectivity, but the solution is 'out there '.

  PS both are unblocked, but I don't think that counts.

• NAS hard drive not accessible more: the device is not configured to accept connections on port 'files and printers sharing (SMB).

  Dear,

  I am desperately looking for a solution for my specific problem how access my NAS.

  I have a hard drive from Western Digital NAS (Book Live) which worked fine until now. Yet, I just changed my internet provider and I now have a new Fritzbox 6360. Now, I can not access the hard disk of the commune of programs in Windows. I contacted two suppliers already, but without success. I think I have some incorrect settings in my Windows 7, 64 bit. This is the situation:

  -NAS is still working with my old Fritzbox, for testing that I went back-> ok

  -I can access the NAS via the dashboard or a TwonkyServer-> ok

  -When I access it via Windows Explorer, I wonder is to give my credentials (which don't work) or I get the error message: the device is not configured to accept connections on port 'files and printers sharing (SMB).

  -J' changed my IP address (dynamic even static) and connections, password-> without success.

  -J' tried SFC with the result that found no violation of integrity. -> ok.

  Any idea?

  Can you please turn off the NAS, unplug the cable and Ethernet cable? Wait about 2 minutes then plug all the cables back in. Any security program or firewall to this computer? Try disabling it for now.

  You have another PC or laptop which has Windows 7/8 and try to access the NAS?

  You have a smartphone or a Tablet and download an application for the WD NAS and then try to access files.

• Push the connection interrupted by device - using eclipse of the bb Simulator

  Using BlackBerry plugin for Eclipse

  For OS 6

  After taking two weeks to try and correct an error "not close until you have finished" simple with SQLite, I now have a bit of a configuration issue with the Eclipse software.

  When I push a message to the Simulator, I get the following error.

  <2012-04-18 15:39:15.471 EDT>:[378]:::http://172.17.111.35:[email protected]&priority=2&besurl=192.168.1... pushId = -62be8811:136c6f71d73:-7ff576188, destination = [email protected], result code = 400 net.rim.protocol.iplayer.push.b: Push connection aborted by device>
  

  According to the knowledge base, a 400 error is 'invalid Push to the format.

  Mobile data service 3.7 and earlier versions: the email address or the personal identification number (PIN) used in the Push was not recognized as a user of BlackBerry Enterprise Server enabled for Mobile Data Service. »

  I'm sure it's something with the configuration in the rim.property file.  Something probably must be on or off, I can't understand.

  [MonitorAgent]
  MonitorAgent.listen.port=8070
  
  [WebServer]
  WebServer.Tomcat.transcoding= false
  WebServer.listen.host=localhost
  WebServer.listen.port=8080
  WebServer.listen.sslport=8443
  WebServer.servlet.monitor.port=8070
  WebServer.servlet.monitor.host=localhost
  WebServer.servlet.push.port=81
  WebServer.servlet.push.host=localhost
  WebServer.servlet.push.ssl=false
  
  [SRP]
  SRP.UID= please get one
  SRP.AuthenticationString= Please get one
  SRP.InetAddress= Please get one
  SRP.Port=3101
  SRP.logging=true
  
  [IPPP]
  IPPP.push.listen.tcp.port=81
  IPPP.connection.MaxNumberOfKBytesToSend=128
  IPPP.queue.flowcontrol.window.size=-1
  IPPP.queue.flowcontrol.timeout=600000
  IPPP.logging=true
  
  [UDP]
  UDP.receive.port=19781
  UDP.send.default=19780
  UDP.init=initialization_packet
  UDP.logging=true
  
  [HTTP HANDLER]
  application.handler.http.logging = true
  application.handler.http.CookieSupport = true
  application.handler.http.AuthenticationSupport = true
  application.handler.http.AuthenticationTimeout = 3600000
  application.handler.http.device.connection.timeout = 140000
  application.handler.http.server.connection.timeout = 150000
  application.handler.http.device.credentialTimeout = 60000
  application.handler.http.authentication.mechName2oid = Negotiate=1.2.840.113554.1.2.2, NTLM=1.3.6.1.4.1.311.2.2.10, Basic=1.3.6.1.4.1.88888.1.2
  
  [Security]
  net.rim.security.auth.DefaultDomain = rim.net
  
  [HTTPS HANDLER]
  application.handler.https.allowUntrustedServer = false
  application.handler.https.logging = true
  
  [TLS HANDLER]
  application.handler.tls.allowUntrustedServer = false
  application.handler.tls.logging = true
  
  [OCSP HANDLER]
  application.handler.ocsp.StatusProviders = net.rim.protocol.iplayer.connection.handler.device.ocsp.OCSPProvider
  application.handler.StatusProviders.OCSP.PrimaryResponderRank   = Default
  application.handler.StatusProviders.OCSP.Responder.Default      = http://dhobbs-wnt.rim.net/ocsp
  application.handler.StatusProviders.OCSP.UseDeviceResponders    = yes
  application.handler.StatusProviders.OCSP.UseCertResponders      = yes
  application.handler.ocsp.DebugLogging = no
  
  [LDAP HANDLER]
  application.handler.ldap.DEFAULT_SERVER = dhobbs-wnt
  application.handler.ldap.DEFAULT_PORT   = 389
  application.handler.ldap.DEFAULT_QUERY  = ou=people, o=rim.net
  application.handler.ldap.DEFAULT_LIMIT  = 20
  application.handler.ldap.COMPRESSION    = true
  application.handler.ldap.logging        = false
  
  [Database]
  Database.shouldConnect=false
  BESName=DAISY1
  Database.Driver=sun.jdbc.odbc.JdbcOdbcDriver
  Database.URL=jdbc:odbc:BESMgmt
  Database.DBCycleTimer=5
  
  [ACL]
  ACL.Authorization.Datastore=net.rim.shared.service.authorization.JDBCAuthorizationDatastore
  ACL.Enabled=false
  
  [ESS]
  ESS.helpfile    = help/Using_the_Email_Server_Simulator.html
  ESS.launcher    = bin/launcher.exe
  
  [Email]
  Email.deviceId      =2100000A
  Email.pop3Server    =pop3.server
  Email.smtpServer    =smtp.server
  Email.personal      =Dean Logan
  Email.address       [email protected]
  Email.smtpPort      =25
  Email.pop3Port      =110
  

  Any suggestions?

  Figured it out.

  When you set the port of the unit, I had the wrong port

  _notify = (StreamConnectionNotifier) Connector.open (appAttributes.devicePort + appAttributes.deviceSide);

  My company uses a Test port and a port of Prod, so that we can have 2 versions of the application on the device at the same time.  Then, chaning the listening port of 1315 to 1313 authorized service push push to the appropriate port and the app was able to read the data.

• Windows is unable to recognize the device, one of the connected usb device has malfunctioned

  in my pc it shows the error when I connect a usb device is something like this perhaps datacard or USB key via a M/F, else if usb cable connected directly connected to the pc port it works fine... even changed the cable twice there is no cable fault

  It would seem that the cables tried maybe not until the correct USB connection plug. If you test this, according to the post Michael75951, and it still does not work, perhaps he could confirm bad cable(s.)

• Cannot test my air application mobile on the device running ios 9.3

  After setting up the publication iOS option and including appropriate .p12 and provisioning profile, my application does not install on my iPad.

  The editing dialog box completes without error and said that my application has been published successfully, but does not appear on my device.

  The application also manages to perfect in the Simulator. I even tried to install .ipa output via iTunes without result file. It appears on the device, all the application charges, begins to install it, and then the icon disappears without warning or error. Is there a compatibility issue with adobe air version 22 and iOS 9.3? After info.plylist the file generated by air compared to that created by Xcode, they seem to be formatted very differently, there are 23 properties and theot she has 48. Still, the issue seems to be with the latest version of the operating system mobile iOS. I have no problem to test the application on an iphone4 iOS 7.1 running

  .

  If you mean that the method of push IPA? Just open the devices window in Xcode, then drag the IPA in the Applications list and select the connected device.

• is itunes error message cannot connect to my iphone because of an invalid response was received from the device

  get error message that IOS 10 unable to connect to my iphone iTunes 6 because of an invalid response was received from the device

  Make sure you are using iTunes 12.5.1 or later, as it is required to communicate to iOS 10.

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support