Tests (phones, etc.)

Similar Questions

• Real device Testing - phone LG G3 - how to fix?

  To test my HTML5 site under construction, a friend with a LG G3 phone signals is not able to open the site from a link. The link works fine on all products apple, iPhone, etc...

  Site contains a Javascript music player, I don't think this is the problem because the site is fairly simple and should easily load the front page in any browser. What steps should I take to track down the fix for this device?

  TIA,

  Ken

  Here is the site:

  http://www.studio10webgraphics.com/praisebook

  What they see instead of your site?

  Is there an error message given?

  Or do you mean that the image map link does not work when they type to go to the page with the image of the big list?

• How can I have a show of name (Harry, phone etc.) device upward in the "devices" section of the Capsule of time instead of the IP address of devices?

  How can I have a show of name (phone Harry, etc.) the device upwards in the section "connected devices" AirPort app for the iPhone and iPad utility?

  Sorry, not the answer you were looking for... but you can not... at least not reliably.

  It's pot luck whether the real device name will be displayed, the IP address assigned to the device will appear. or the MAC address of the device will appear.

  Apple still has not corrected it after many years.

• where can I enter name address phone etc transfer to a form

  Downloaded autofill and I try to configure the form to transfer data simply to a form that appears on the internet. I need to imput all data with the airlines when I buy online. Sometimes I buy 7 tickets with numbers of flyer freq. and time bynthe I finish the computer says that I have to start over. was not finished in time. Downloaded 32 FF beta autofil 36 forms autofil fill

  Some add-ons will place an icon in the toolbar, and in some cases, you must use the personalization feature to find the icon. This article describes how to check the unused icons and move them to the menu or toolbar: controls customize Firefox, buttons, and toolbars.

  If you can't find a menu item or toolbar, you can probably use the Options button in the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then look for an option button and automatic filling.

  A little luck?

• How to print a readable test page

  Original title - Epson printer

  How do you clean nozzle head and printed the test page (it's copies that are unreadable).

  Hello

  You will need to contact the Epson Support for your model of printer for this information.

  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp

  Supports Contacts.

  Include email, phone, etc. support links here.

  http://www.Epson.com/cgi-bin/store/support/SupportContacts.jsp

  See you soon.

• Failure of execution of test scripts.

  I get the error of the Test Script execution - "failed to run the Test Script. "Reason: the system cannot find the file specified."
  What happens to all my test script files. I can load the test of script files, change the test scenarios, etc., but can not run test scripts
  If I click the view Script of Test specification, they all upward, and the report shows all cases in the test script.
  If I look in the phone book, they're all here, with the .tsc extension and a file type of TSC
  I created a new TSC this morning, but with the same results
  
  They worked yesterday. Since then, I rename one of the test scripts and changed my generation of .NET to Java platform.
  
  Any thoughts?
  
  Thank you
  Allan Gibson
  
  P.S. I note now also the my files of analysis do not work and receive a message: execution runtime error '-2146233088 (80131500) ": batch didn't. Reason: the system cannot find the specified file (OPA-E00241). When I press the Debug button, I am taken to a screen where the line "call GetExcelCompilerProxy(). Analyze (ActiveWorkbood)"is highlighted in yellow.
  
  Published by: a Gibson on 2012-Sep-11-09:02
  
  Published by: a Gibson on 2012-Sep-11 09:09

  Hi Allan,

  You can run test scripts using the Java platform, or is it just this project that does not work? I suspect the problem is environmental, meaning that it is likely to be something to do with the version of your OS/install/Java etc to be something specific to this project. If you wish, feel free to send me your project, more about what OPM/OS/word/Java version you are running and we can take a closer look.

  Thank you
  Kristy

• Test of Vmotion using virtual center

  Guys,

  I've finally put together two esxi hosts and want to test vmotion, etc..  When I tried to download the virtual Center, I get this message below.  They no longer offer free trial version?  VSphere replaced it?

  I'm runing esxi version 3.5 build-110271

  Thank you

  TNT

  -

  ---

  VMware vCenter Server 2.5

  Sorry, at the moment you are unauthorized to download VMware vCenter Server 2.5. You have the following options:

  • If you have a serial number valid VMware vCenter Server 2.5 and you don't him is not registered, please register it here, so you can get access to download.

  • If you want to get more information about VMware vCenter Server 2.5, please contact VMware sales department [email protected] or by phone 1-877-4-VMWARE.

  The question is that VMware wants you to move to vSphere for you is no longer can down load VI - 3 licenses without proper license - if you want to test vCenter in the VI-3 Please contact sales for VMware environment and they should be able to get you a copy for evaluation purposes.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Why I have to keep my phone uodating

  I don't want to download more updates.  When I refused the update for 9.3.4, all of a sudden my wifi is almost non-existent.   It worked fine before I declind update.  Back the wifi on my phone, turned the phone etc., but it seems that the only way to use wifi now is to update my phone.

  What is the point to buy Apple if our phones stop working when deny us access to our phone content of the Apple?  Maybe it's time to go back to Blackberry.

  See if that helps before the update...

  Tap Settings > general > reset > reset network settings

  If not, try here > If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Declining an update shouldn't make your Wi - Fi connection unless your device is years behind.

• Can I transfer music to my phone on the car?

  I'm going somewhere now and I want to know if my phone has no data (which is my primary phone), but I want to just test it on one of my iPhone not daily driver 6s, what do I do since I downloaded it on my computer, will be automatically download work if my iPhone is out of Wi - Fi or no service Since the iPhone that I use as my daily driver is under contract (iPhone 6 s more than 128 GB), so my test phone has no SIM CARD.

  Use Bluetooth to play any music you have on your phone on your audio system. You cannot transfer music, but you can play it. If your car has no BT, you can use the headphone output / auxiliary connection.

• My wife and I I have phones and a shared Ipad. We share the same I clouds account and contacts and photos.  The problem we have is that my phone thinks I'm him and when I get calls or texts others she also see / Gets the.  How can we

  My wife and I I have phones and an I Pad on his account.  The I-cloud and I-tunes are his accounts and we both use the same for the sharing of photos and contacts.  My phone thinks I'm him and when I get calls or texts of others she sees / get them.  Can put us in place so that we share our contacts, photos and saves account/billing but having our own identity on our phones etc?

  Stop sharing an account. Use home sharing and set up an ID for each of you

• Test bench - selection of material resources

  Hi all

  I use TestStand 4.2.1 with LabVIEW adapter (LV 2009).

  I'm developing a test sequence which, for the time being, works on the sequential process model and will run later on the model of parallel processes. I also develop OI in LabVIEW for this test sequence. The test involves the use of an EMS and a NISE virtual device (I preferred, so far, using subVIs NISE in LabVIEW modules rather than integrated NISE TestStand facilities).

  (1) in order to select the resources of hardware device (EMS reference, name of virtual device NISE, NISE itineraries to be connected, etc.), I have a dedicated module for LabVIEW (VI) who runs first, in the configuration section. It is followed by other modules of "Open & configure ' for each material resource, it is a basic interface (dialogue) with drop-down lists that allow the user to select resources. However, if I want to use the parallel model for 4 DUT, it will display 4 these dialog boxes; also, in each race for each object to be measured, re-displays the dialog box.

  My question is: How can I switch handles/references to material to be configured for the IO sequence I'm building in LabVIEW? Should they be passed as parameters to sequence (params) for MainSequence? The operator must select resources only once, when he starts the IO; After that everything should work without needing to select again the device resources.

  (2) if I implement the model of parallel processes, how can I access variables of each socket (running in parallel to the test sequence), etc. At this point, I do this by using the 'testbed - Get property"Subvi (from the context of the sequence and the search string to the Subvi). In the case where I have 4 outlets running, how to sequence of each socket context? Or is there another way to access the properties? (I see "ThisContext.RunState.TestSockets" as variables in TestStand... is it a clue?)

  Thank you in advance for your help!

  Have a great & productive day

  Fr. Paul HARFAS
  PhD student
  University POLITEHNICA Timisoara, www.upt.ro
  Faculty of electronics and telecommunications, www.etc.upt.ro
  Applied electronic Department, room B114, http://www.ea.etc.upt.ro/
  V.Parvan av, no.2, 300223 Timisoara, ROMANIA

  Hello Paul,

  I enclose an example that does this with a modified version of the Simple OI of LabVIEW. It displays variables in the file Test.seq in a table. This is just an example and must be modified to work with your application. Have a great day!

  Best regards

  Adam G

• Transferring contacts from the phone to the sim card

  Help. How can I transfer my data from contacts from the phone to the sim card. I have a new phone and this would save back me them all manually. Ray.

  To allow a person to help, can you provide Details view please? as brands and models of phones, etc.

  If Lumia see http://www.microsoft.com/en-us/mobile/support/faq/?action=singleTopic&topic=FA140263 which shows information on how to transfer some details via Bluetooth, etc.

• Cryptography and 7921 G phone

  Hi all!

  We have several 7921G phones we want to integrate into our WiFi network. This WiFi is protected by using EAP - TLS, so we installed the certificates to a single test phone. We discovered that the phone does not support certificates with RSA keys larger than 2048 bits with and, at the same time, their signatures must be always generated using the SHA1 hashing algorithm. This fact also appears in documentation of the phone. As a result, we have a problem since the certificate root CA using a 4096-bit key and the SHA256 algorithm. We have also updated the firmware to the latest version without success in this regard. Anyone know if there is any plan to a firmware upgrade to support the keys with a larger size and a different hash algorithms? Currently, algorithm SHA1 is considered to be obsolete and security community recommend using a different hash algorithm, as the same that occurs with the size of the keys.

  Sergi

  double post. See below

  https://supportforums.Cisco.com/message/4142321#4142321

• Encryption and 7921 G phone

  Hi all!

  We have several 7921G phones we want to integrate into our WiFi network.

  This WiFi is protected by using EAP - TLS, so we installed the correspondent

  certificates to a single test phone. We discovered that the phone does not work

  support of certificates with RSA keys larger than 2048 bits with and.

  at the same time, their signatures must be always generated using the SHA1

  hash algorithm. This fact also appears in the documentation of the

  phone. As a result, we have a problem since the certificate root certification authority

  use a 4096-bit key and the SHA256 algorithm. We have also updated the

  firmware to the latest version without success in this regard. Does anyone know if

  There is any plan to an update of the firmware in support of keys with a larger size and

  algorithms of hash one another? Currently, the SHA1 algorithm is considered as

  obsolete and security community recommended using a different hash algorithm.

  the same happens with the size of the keys.

  Sergi

  Hi Sergi,

  This 7921G already EoL product list, so don't expect do any updated firmware for it.

  http://www.Cisco.com/en/us/products/ps7071/

  I don't think that even all the latest phones 7925G will support 4096 bit keys as well.7925G support only the length of key of 1024 or 2048. Check out this guide to deployment for retail (page 97)

  http://www.Cisco.com/en/us/docs/voice_ip_comm/cuipph/7925g/7_0/English/deployment/guide/7925dply.PDF

  HTH

  Rasika

  Pls note all useful responses *.

• BlackBerry Pearl Flip 8220 default Smartphones phone to add to Contacts

  Thought, it would be a simple question but can't find an answer anywhere, so maybe someone out there knows...

  When we add a call to contacts ("add to Contacts"), the default phone number to the job category.  How can I change the type of default (home or Mobile) phone?  It's a major pain to re - enter the number in a field below, then remove from the job.

  Follow-up-

  I found two great apps that do exactly what I want and they can be downloaded from a PC.  From the PC, they can be loaded into the Blackberry via cable USB via BB Desktop Manager.  No data not necessary plan.

  The two programs are "Add number 2" and "add to contacts 2", both by MobiChampion software.  These are available for purchase and download from mobihand.com.

  Add that number allows a phone number to be added as a new contact in a very controlled way (specifying what type of phone, etc.)

  Add to Contacts, lets you add a phone number to an existing contact, which allows once again allows you to specify the type, etc..

  The two seem to work great for me; would that BB would make these standard features.