Text Beveling & stamping Bug (CC 2015)

Similar Questions

• Bevel/stamping effect with brush?

  Hello

  I found a brush that allowed me to apply effects of bevelling/stamping. Now that I went to for use again, I can't find a way to do this without one) by selecting the entire image, or b) by selecting a part and use it as a filling. I just want that it on a BRUSH.

  How can I do this again?

  Change your toothbrush white background color and the Blend Mode to Darken:

  

  Julia

• Where the Option of text string in Photoshop CC 2015.5 update? He disappeared from the options panel

  I was about to put a bow on my text in photoshop to realize he was missing. It's in the previous version of the cc than 2015, but this 2015.5 update is gone. He did not move, or is this a bug?

  Thank you guys for the quick responses, I actually knew where he was, but he wasn't there. I just restarted the program and it appeared as if by magic. Laughing out loud.

• The text flow inconsistency bug - what to do when workaround does not work?

  Hello

  I am severely touched by the "Inconsistent text flow" bug, which threatens to force me out of business, because all my sites are produced in the Muse. I can't update my sites - the bug strike immediately and Muse stops.

  The message looks like this, but the references are always different (different textbox and different reference breakpoint):

  

  I tried the workaround solution described in the Adobe's Forum thread: Muse-P error incompatible a number of children through breakpoints in text U199116 [was: Muse has encountered an error]

  but without success. The bug is still strangleing that my business - and now my clients is growing very impatient.

  If I understand correctly, the bug was introduced with the last update of Muse. Why don't remember you this update and offers the opportunity to reinstall the previous version in good health?

  A very quick response will be appreciated.

  Thank you

  Sten

  I was forwarded to the Adobe technician who asked my MUSE-file. After a day, he responded with this:

  Please select the block of text you want to change and raises questions, in the 320 breakpoint. On the text block right-click > copy text formatting to > all breakpoints.

  I have now finished testing the solution - and it works. But it removes all formatting of specific breakpoint, then you will need to go through the process of formatting, once more.

  In fact, I recommend Adobe to address the initial fault base, so the bug never shows its ugly face again.

  But thanks for the advice, which brings me back in business.

• confirmed a subelement bug in 2015.1

  First, watch this short video showing the issue, I did.

  Infuriating bug of first pro 2015.1 - YouTube

  How to recreate this bug-

  1. import a video clip.  Format is not serious.

  2. some subitems video imported.

  3 when subitems, uncheck the 'restrict the toppings for subclip limits. "

  grid mode, the poster frames a subitem must unfortunately be square black.  mousing over them will make the system displays a poster frame and hover work of scrub.  However, by clicking on a different subcomponent, or even do some work in the Panel Assembly causes the poster frame back to black.

  big bug.  the application makes it unusable if you have a project with a ton of subitems.

  I would say that sub-elements are detailed in this release.  the key to this bug and its annoying workaround is in the box 'restrict the toppings for the subclip of the limits.  Unchecking it causing the problem, it makes thumbnails behave in the tray as it should.

  Unfortunately, this means I have to manually, right-click on each subelement and choose ""MIC for subclip limits to restrict "if I want to see all thumbnails." 

  You can read more about this bug on facebook 'Moving to Premiere Pro' group here - https://www.facebook.com/groups/premierepro/?fref=nf

  my gear - windows 10-32 GB of ram, 6 core haswell-e, with Titan X GPU. The previous version of first doesn't have this bug.

  also, someone on the facebook thread confirmed this bug on the mac with 2015.1, both in windows 7, so it is most certainly cross-platform.

  In the context menu, uncheck vignettes show the applied effects.

• Bug in 2015 using two monitors and 6 K resolution Footage update

  After the update CC PP 2015 Ive notice a bug when I pull and extend a clip in my scenario, my second film LED 27 "monitor monitor which mirrors my monitor of the program just starts blinking and does not show the images rubbing as he used to. I extend the clip it does not reflect the correct position of the clip, it sparkles so that it shows my home desktop screen on occasion. Has anyone else been done to meet this bug. Its quite frustrating. This happens only when I have a second monitor hooked up. I've updated to version 9.0.2 they come out today. and I got the version 9.0.1 installed just F.Y.I before And I always feel the same questions. I am attaching a video and photo, so you can see the problem that is happening. After having tested far this only happens with images of 6 K resolution. It does not with a resolution of 4K and below. And again once this has happened after the update 2015 The photos of the show when I make drag and extend a clip in the program Monitor flashes and does not play the preview as it should, you can also see the timecode overlay is not correctly aligned either.  Password for the video: CCPP and I use a MacPro 2013 with 64 g ram duel D700 graphics cards and I'm editing a disc SSD of Raid Thunderbolt 2.

  
  

  I talked with Adobe tech support representative and he had no solution for me. Adobe can you please offer assistance more. Everything was good in Premiere Pro 2014 so it's probably a bug in update 2015 or conflict.

  
  

  

  Hi Azzie,

  After the update CC PP 2015 Ive notice a bug when I pull and extend a clip in my scenario, my second film LED 27 "monitor monitor which mirrors my monitor of the program just starts blinking and does not show the images rubbing as he used to. I extend the clip it does not reflect the correct position of the clip, it sparkles so that it shows my home desktop screen on occasion. Has anyone else been done to meet this bug. Its quite frustrating. This happens only when I have a second monitor hooked up. I've updated to version 9.0.2 they come out today. and I got the version 9.0.1 installed just F.Y.I before and I always feel the same question >

  I see that we have a solution for you on another thread. Locking this since it is a copy of the other thread.

  Thank you

  Kevin

• Possible bug in 2015 CC LR

  I installed LR 2015 and started testing some of the new features and immediately discovered a bug, unless I'm doing something worng and LR to change how it sets the location of the catalog.

  All the original software in installed on my C drive, which is small intentionally. I keep all my data on external drives. He still has my LR catalogs. I define my location of the catalog in Edit > catalog... settings > Show. This location is defined as D:\DriveD\Lightroom catalog.

  Lightroom resets the catalog to C:\Users\Jim\Pictures\Lightroom whenever I go out LR. LR is not to save my location of the catalog set.

  I'm missing something. Is this a bug? If this is not the case, how can I fix it.

  Jim

  I don't see this behavior. You can check your Lightroom preferences, under the general tab, the default catalog and make you think she's ready to open the most recent catalog.

• Captivate 4 text entry box Bug (?)

  Hello

  I'm really not sure if it is indeed a bug, or I could just be missing something else.

  I created a very simple project of 30 slides in Captivate 4 with some text entry areas. What is the peculiarity of the ETB, is that they contain a = (equal) sign which must be validated, e.g. = New.  I publish the project in AS3 and whoooah problem occurs.

  I enclose below a screenshot of the published output.

  Have someone else encountered this problem?

  I also discovered that when I move to AS3 to AS2 there is no problem at all.

  BR\\

  -Miguel

  

  If the problem is resolved by deleting the = character in the text box, then I would say that Captivate is tripping over it as if it were a piece of code.

  I would call it a bug, but I know that there are other characters and symbols which have been found to cause problems.  I put the brackets [] once in a CC text and that polluted a project as well.

  Save as a bug or feature request and see what happens.

  In the meantime, you may need to find another way to convey your point in the lesson without using this method of text box?

• displayAsPassword text is empty (Bug?)

  When defining a text entry field with the 'displayAsText' option = true the field will only show no results when you type in it. If I set it to false, I see the text as expected. The documentation states that it must be shown with "*" instead of the text. If anyone can do this work or is it a bug?
  
  I use Mac OSX / PPC, if that makes a difference.

  Yes, sorry that should "displayAsPassword = true". Never mind. It's conflict with the style sheet. I don't know why, but when I removed the styleName of the object, it worked.

• Inserting text to Muse since illustrator 2015 not in SVG

  I need to copy text from illustrator text NOT as SVG for paste in Muse so that it takes is formatted to Muse. Is there a way to do more?

  Probably the simplest way is to bounce through a word processor... If you copy and paste in MS Word and then copy from Word and paste in Muse, the result will be a paste text and it will get the formatting where you paste in. I expect that the same would work using any word processor that accepts the text rather than the SVG or PDF of things out of the Clipboard.

• Entrance to bug CC 2015 of numeric values

  Recently Illustrator gives me trouble when I manually change certain numerical values for example the font size, dimensions of the object and line weight

  The value that I am seized suddenly gets multiplied by 10,000.

  Sometimes, even when I select a thickness of line in the menu dropdown.

  I saw a user reported the same problem on a CS6, I was wondering if there is a known problem / how to solve.

  THX

  See https://forums.adobe.com/thread/1881886

• Text on path CC 2015

  It drives me crazy and I'm sure it's probably something small, I'm on. I'm trying to create text on a path, but I keep coming up against no real text on a path in 2015 CC tool. All I see is the horizontal and vertical MASKING tools, I don't want to. This tool has been eliminated in 2015 CC or moved? Or am I just crazy and something that I'm supposed to do to one of the parameters is missing? I tried Googling this but have nothing seen.

  OK, nevermind. I realize what I'm doing wrong. What can I say? I have worked too long tonight & probably need a break. (I knew it was something simple! * facepalms *)

• Options Bar - how to return between 'text' or 'icons' in the options bar

  The Options in Photoshop CC bar was representative of text and in Photoshop CC-2015 options is the icons. For example, when you have the selected spot healing tool options bar would show an option for sensitive content in 'text' but now I see it as an "icon" that I have to hover over to see the text. This may be configured or "flip" in both senses of 'text' to 'icons' or vice versa?

  Thanks for the update.

  Go to Preferences > workspace > uncheck 'Enable close bar options' > restart Photoshop

  .

• Lightroom 2015 5.5 lose selection field legend when moving from image to image

  The latest version 2015 5.5 on mac, broke the ability for lightroom to have the field legend selected when moving the image to the image, to use the mouse to select again the caption field whenever I have switch from one image to another, this is not a major problem but does not slow down subtitle when have to write captions for a large number of images.

  Can it be returned to the next version?

  Please add your vote and detailed opinion to this bug report: 2015.5 Lightroom: don't keep the focus in Keywording boxes or title. Community customer Photoshop family. Even though Adobe has acknowledged the bug, which does not necessarily that it will be fixed in the next version.  Your vote and opinion makes it (slightly) more likely Adobe will give priority to a solution, and you will be immediately notified of updates to the question.

• the two versions of Muse (2015.0 and 2015.1) at the same time

  Hello dear Musers,

  Is it possible to install both versions (2015.0 AND 2015.1) at the same time?

  I manage several sites and I want to be able to update regularly (stable and bug release 2015.0) while slowly, tests and moving them to reagent (2015.1)? Also to start playing with the possibilities of delicate design in Muse.

  I also have a site with complex effects of scrolling that should stay that way. I can't run the risk of not working after the update... at least I have a replacement with Animations of EDGE...

  Thanks for the help.

  J. Vallejo

  If you an active member of Muse and can accept the terms of the non-disclosure agreement, my recommendation would be to join the beta program of Muse at http://museprerelease.com. At the moment the latest preliminary 2015.1 is always displayed and it is basically identical to the retail version, but with a splash screen different. In general, it is deleted shortly after the production version is released, but has not yet happened.

  The preliminary version installs the construction of shipping along the coast. The two have no overlap, other than the fact by double clicking a .muse file is a bit of a gamble in terms of what version of Muse, the operating system decides to launch.