Text box for the title of master InDesign

Similar Questions

• No text box for the ADF form the input text.

  Hi all

  Im trying to create a form of ADF that can send data to a table. Ive never done this in a tutorial and it seemed pretty simple. Now, when I run the project page comes up with any type of data. Is there a solution to this?

  

  Drag and drop the Insert to create the data to the form control.

  a descent of the project area click on create the text of the button Shows.You Enter input data and click on submit.

  I have tried.it worked fine

• Change the background color of the text box for the required field

  Guys,

  I want to change the background color of textfield required when the user is in data entry Mode. And when the record is validated successfully the background color should be back to the default.

  That's what I've done so far.

  Created a Visual attribute that contains the background color.

  In the record of the creation of the data block added the code below.

  IF: SYSTEM. BLOCK_STATUS = 'NEW' THEN

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) BATCH ', VISUAL_ATTRIBUTE, 'ENABLE_COLOR');

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) VENDOR', VISUAL_ATTRIBUTE, 'ENABLE_COLOR');

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) AMOUNT ', VISUAL_ATTRIBUTE, 'ENABLE_COLOR');

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) ACCOUNTING_DATE', VISUAL_ATTRIBUTE, 'ENABLE_COLOR');

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) INVOICE_DATE', VISUAL_ATTRIBUTE, 'ENABLE_COLOR');

  ON THE OTHER

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) BATCH ', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) VENDOR', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) AMOUNT ', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) ACCOUNTING_DATE', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) INVOICE_DATE', VISUAL_ATTRIBUTE, ");

  END IF;

  
  

  And in the key to commit the following code is added

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) BATCH ', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) VENDOR', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) AMOUNT ', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) ACCOUNTING_DATE', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) INVOICE_DATE', VISUAL_ATTRIBUTE, ");

  
  

  
  

  The problem is, form opens in the mode of data entry, so mandatory fields have changed background color, and mode query and run the query, background colors are changed in accordance with a.

  
  

  Any help how to solve this problem?

  
  

  Also, what tag should I use to highlight the code in my post, the FAQ forum says its {code: sql} but his does not and the code is not formatted.

  
  

  
  

  Concerning

  
  

  
  

  Dear Faisal Niazi,

  Write code to set the normal Visual attribute in the trigger WE POPULATE DETAILS or after REQUEST of the block trigger.

  Manu.

• How to set up make-style for the text box in the apex.

  Hi all
  
  I created a text box in the apex and now I'm changing the font for that text box style and I applied here like this is this correct one or any suggestions on this.
  

  --
  HTML Form Element Attributes: style="font-family:Arial;font-style:Regular;
  The apparoach is the right one or not.
  {code}
  
  
  Thanks,
  Anoo..                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

  David wrote:

  I created a text box in the apex and now I'm changing the font for that text box style and I applied here like this is this correct one or any suggestions on this.

  --
  HTML Form Element Attributes: style="font-family:Arial;font-style:Regular;{code}
  The apparoach is the right one or not.
  

  N ° attribute is missing a quote from endpoint, and "Regular" is not a valid value for the http://reference.sitepoint.com/css/font-style">make style property.» Valid values are normal | italic | oblique as shown.

  Also, it is recommended to specify a default value of generic downturn at the end of the specifications of font family :
  {code}
  style = "do-family: Arial, Helvetica, without serif;" make-style: normal; »
  {code}
  (There's really no need to ask such questions icies and waste of time to wait for answers: to bookmark a good reference CSS like Sitepoint link above or the http://www.w3.org/TR/CSS21/#minitoc"> W3C CSS specification and refer to them as needed.")

• Problem with text box on the Page Master application to other pages.

  I've done this before with success, but maybe I'm missing something and don't have the time to waste on this one there...

  I applied a text box to the master page. I applied the master page to all the other pages, but on each page, the text box will appear like this:

  

  I can not type in the text box or select or something. I have a go back to the Page Master and the text box is a-okay.

  What I'm missing or doing wrong this time?

  Me once again and I have the solution!

  1. place the text boxes where you want on your Master.

  2. go in the 'Pages' Panel and highlight all the pages.

  3. in the "Pages" options of the sliding panel, choose "replace all Master Page items.

  Now, all your pages have a floating text box!

  See you soon!

  Mikey

• / Text box link to another article in Indesign

  Hey guys,.

  I hope I can do so.

  I copy the text and/or text boxes in an Indesign document that has been put in place for printing (210 x 297) and paste it into a new document put in place for iPad (1024 x 768) to Adobe DPS.

  After pasting, I replace the missing fonts with versions of open Type.

  If I then close print document which I copied the text and then click a text box in the iPad-target document, print file will open immediately.

  Similarly, import of the article focus on the iPad in a folio will result in the original InDesign file is inaccessible during the import process.

  To remedy this, I have severed all ties to the styles, removed all paragraph and character styles, copied the text into a new text box in InDesign temporary document then copied the text in that targeted iPad... and always the same--opening of original print document has a third.

  Any help would be totally fantastic.

  See you soon.

  Nathan Ford

  Reddo Media

  I had the same problem with some of my files. We understand that the problem may be caused by a left on hyperlinks or interactivity attached with this text. If you go to links and break everything that it should be corrected.

  If that does not try not select and copy only the text and paste it into the new InDesign document. Do not copy and paste the text box I have found causes more often this type of behavior.

• I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  Yes, you can have a one word title, by assigning a paragraph style title to this one word. No, you cannot change the text in a Table of contents, but you can change paragraph style font attributes (line) and add for example, a head of points between the types of OCD paragraph and page numbers. No part of the table of contents will not provide hyperlinks in exported PDF documents.

  When you look up in the menu bar, you can see the word iPages, or simply Pages. There is no product of iPages.

• How to unlock objects in spread? My can´t objects be moved (stand picturesboxes and text boxes), and the control/opt/L command is not available. Anyone know how to do? Maria

  How to unlock objects in spread? My can´t objects be moved (stand picturesboxes and text boxes), and the control/opt/L command is not available. Anyone know how to do? Maria

  Try trashing preferences. See replace your preferences

  And please turn off or remove the autoquote bey email for the answer. Thank you.

• How can I add a text field for the main menu?

  I have a project with a menu.  He has a title.  I wanted to add an additional track on the menu, what I had done in an earlier draft.  I would have thought he would have intuitively obvious, as highlighting the existing title I and do a copy and paste.  However, I learned that nothing is intuitive with Premiere elements 12.  Can someone tell me how to get a 2nd title on my main menu?  I have done it before, but apparently did not write it and I was faced with that I falsely assumed would take me 30 seconds to accomplish.  Thank you.

  Rick

  Do you really need a second title for the page in the main menu and the selection of scene or you page fixed for your Adobe title in more than one line?

  I wonder

  I wanted to add an additional track on the menu, what I had done in an earlier draft.

  Is it possible that as soon as you use a theme which came with 'subtitle', as the trip/Beach Resort, not all do.

  

  Workaround for the title with more than one line of text can backfire on you. But you can try. Excerpt from my first items 13 on this blog

  0019 first Elements 13 movie Menu title question: multiple lines of text

  
  A first elements 13/13.1 user reports that, if it creates a 3 lines of title text for the main menu of the fake big screen theme in the customization area of Movie Maker project, these 3 lines of text eventually "encoded" in the project of reopening after that that there had been closed.

  We have confirmed this report and extended it to include this problem appears for 13 of Menus other than the fake Widescreen cinema. This issue is not seen in first items 12/12.1 and earlier versions.

  BEFORE REOPENING THE CLOSE SAVE

  Figure 1. Main menu of Spring Flower home with 3 lines of text, as seen before the closure of the Reopen

  AFTER THE REOPENED NARROW SAVE

  
  

  Figure 2. Spring Flower main Menu title initially with 3 lines of text, as seen from the closure of the Reopen

  
  
  The only way found so far to get the final product to have 3 lines of title text for menus in the final product is to customize the theme to the movie Menu in the customization of the Menu movie of the project area, do not save, close the project at this time and can do the burn to.

  
  Many variables were examined to explain this behavior. So far, no answer for why.

  If you are determined to use a particular theme that comes with the title menu and subtitle, look at the text of the Palette layers layers in the editing menu .psd file (.psd Editor could be Photoshop CS or higher).

  Regarding

  on my project last year that was the menu that I liked with 2 text fields, I have also got rid of the "arrow" shortly before the text that was the menu key.  Anyone know how I do that?  I can't figure that out now.

  Could you be more specific. But, for now, consider... If you Play All text, you double-click to open the text of the amendment, the deleted text, click OK. Play All disappeared. Sometimes, in page and removal of text "main menu" scene selection to the navigation button... double click on the button to open the changes to the text, delete text, press ENTER, and then bar spacing, and click OK.

  Please let us know if everything above the target you wanted to know.

  Thank you.

  RTA

• Insert the value in the TEXT box where the cursor was

  Hi all

  I would like to insert in a text box. at the cursor position (or replace selected text), a text.

  I am using the following script, but I can't get it to work.

  (see  .. http://StackOverflow.com/questions/5889127/insert-value-into-textarea-where-cursor-was )

  
  

  Thanks in advance

  
  

  Concerning
  

  Saverio
  

  =======================================

  My texarea point is P200_AFORMULA

  ========================================

  function insertAt (myField, myValue, startSel, endSel) {}

  If (startSel | startSel == "0") {}

  var startPos = startSel;

  var endPos = endSel;

  myField.val (myField.val (.substring(0, startpos)) + myValue + myField.val () .substring (endPos, myField.val () .length));

  }

  else {}

  myField.val () += myValue;

  }

  }

  the function call

  targetBox var = $("textarea #P200_AFORMULA"), startSel, endSel;

  targetBox.bind ('focusout/focusouthandler()', function() {}

  insertAtCursor (this, "how do you do");

  startSel = this.selectionStart;

  endSel = this.selectionEnd;

  });

  var mytext = 'PARALLEL TEXT';

  insertAt (targetBox mytext, startSel, endSel);

  }

  Jorge,

  I discovered that the problem is due to the command targetBox.bind ('focusout/focusouthandler()', function() {... })
  I tried the following solution work now and it's

  Tanks for your answer

  Saverio cordially

  =================================================================

  function insertAtCursor (myField, myValue) {}

  IE support

  If (document.selection) {}

  myField.focus ();

  Salt = document.selection.createRange ();

  salt. Text = myValue;

  }

  Support MOZILLA/NETSCAPE

  Else if (myField.selectionStart | myField.selectionStart == "0") {}

  startPos = myField.selectionStart var;

  var myField.selectionEnd = endPos;

  myField.value = myField.value.substring (0, startPos)

  + myValue

  + myField.value.substring (endPos, myField.value.length);

  } else {}

  myField.value += myValue;

  }

  }

  the function call

  insertAtCursor (document.getElementById ('P200_AFORMULA'), "TEXT ENTERED");

  }

• Need to show some search values in the text box on the Dataset to ask

  Hello
  
  I have a requirement where I need to display the values (which are roles) from a search in the text box. The purpose is to show to the end users list of roles. They should not be able to select these roles. They simply view the list and enter role in a text field. I thought of using the text box as the component to use for the display of these roles. However, I can't use the property search for widget = "textarea" in the dataset query.
  
  Can we achieve or y at - it no other components where I can show list of roles so that users can simply view the list.
  
  Thank you.

  In research, you use a query. You can run the same query to prepopulate adapter. And certainly you can pre-populate TextArea.

• Add a picture to the text in the text box to the location of the cursor through Actionscript and control its reference level

  If I want to add pictures to the location of the cursor in the text box, I need to use EditManager insertInlineGraphic. But insertInlineGraphic offers no parameter to control how an image is placed in the text, such as baselineShift.
  While InlineGraphicElement allows me to well control on image added how is placed in the text through properties such as baselineShift, but then there is no way to add this InlineGraphicElement object newly created as the location of the cursor in the text box!

  So, how do you overcome this limitation? How can I add an image to the text in the text box to the location of the cursor through Actionscript and control its reference level?
  
  

  Post edited by: DilipShah

  After you add the ILG, you can find the ILG element by textFlow.findLeaf (cursor location) as InlineGraphicElement and then change its attributes. Or you can just enjoy applyLeafFormat().

  FindLeaf is an important function for navigation in the TLF.

• Turn off the text box with the value of the checkbox

  Hello people,
  
  I am trying to activate or disable the text box with the value of the CHECKBOX, I have got the same thing with the BOX of ELECTION, with the javascript as follows: -.
  
  HEADER HTML
  ----------------------
  < script type = "text/javascript" >
  function disableOnValue (o)
  {
  If (o.value == 'Y')
  {
  document.getElementById('P2_TEXT_BOX1').disabled = false;
  document.getElementById('P2_TEXT_BOX2').disabled = false;
  document.getElementById('P2_TEXT_BOX3').disabled = false;
  }
  on the other
  {
  document.getElementById('P2_TEXT_BOX1').disabled = true;
  document.getElementById('P2_TEXT_BOX2').disabled = true;
  document.getElementById('P2_TEXT_BOX3').disabled = true;
  }
  }
  < /script >
  ---------------------
  
  under region Source whose Point display is < b > before < /b > foot and sequence is the last sequence of the entire region
  ----------------
  < script type = "text/javascript" >
  If (document.getElementById('P2_RADIO_BUTTON_0').checked is true)
  {disableOnValue (document.getElementById('P2_RADIO_BUTTON_0')) ;}
  on the other
  {disableOnValue (document.getElementById('P2_RADIO_BUTTON_1')) ;}
  < /script >
  ----------------
  
  and finally, to the title of point RADIO_BUTTON, HTML Form element attributes: -.
  -----------
  OnChange = "JavaScript:disableOnValue (this); »
  ----------
  
  the thing above works very well with the help of the RADIOBUTTON, but I want to try same thing with the CHECK_BOX I also tried a few changes but did not have any success so if someone help out me even that will be great and appreciated!
  
  
  Thank you
  
  Kind regards
  Kumar

  I also have the following in the Footer region region:

  <script type="text/javascript">
  x($x('P12_CHECKBOX'));
  </script>
  

  This is just to make sure that the items are disabled when the page is loaded, because the checkbox is deactivated

  Andy

• JavaScript: Disabling text box in the report column cell

  Hello
  
  Andi (ATD) helped with formatting of columns in the report, their coloration depending on a value. See:
  JavaScript - referring to the value of the report column
  
  Now, I want to add a feature:
  If the value is "1" then turn off the text box in the column next, otherwise no. The function is:

  function hilite(f1)
  {
   var h = document.getElementById(f1);
   var t = h.parentNode;
   while (t.tagName != 'TABLE')
   {
    t = t.parentNode;
   }
   var rows = t.rows;
   var k;
   var i;
   var j;
   var c;
   var headers = t.getElementsByTagName("TH");
  // var textarea = t.getElementsByTagName("textarea");
   for (k = 0; k < headers.length; k++)
   {
    if (headers[k].id == f1)
    {
      c = k;
    }
   }
   for (k = 1; k < rows.length; k++)
   {
    i = rows[k].cells[c];
    j = rows[k].cells[c+1];
    if (i.innerHTML == '2')
    {
      i.style.backgroundColor = 'yellow';
      i.style.color = 'white';
      i.style.fontWeight = 'bold';
      i.style.fontSize = '18px';
    }
    if (i.innerHTML == '1')
    {
      i.style.backgroundColor = 'red';
      i.style.color = 'white';
      i.style.fontWeight = 'bold';
      i.style.fontSize = '18px';
      
  //  j.style.backgroundColor = 'green';   // testing purpose; colors background green but not textarea
      j.style.visibility = 'hidden';               // works fine but ugly
  //  j.disabled = 'true';                        // nothing happens
  //  j.firstChild.disabled = 'true';           // does not work
  //  j.textarea.disabled = 'true';           // does not work
    }
   }
  }

  See the object of 'j': I can do the whole cells disappear, but it's ugly. It examines with firebug I thought I should use sth. such as firstChild or textarea, but it does not work. I find always pretty hard to manipulate tables in Apex...
  
  Could someone help with this?
  Thank you very much
  Roger

  Hi Roger,

  «"" You're sort of almost here!»»»

  The next cell to the right of the one that that you are testing contains a TEXTAREA object. Your variable j accesses it using something like:

  j = rows[k].cells[c+1].getElementsByTagName("TEXTAREA")[0];
  

  The problem with the help of the method of visibility you have used will disappear while you applied to the entire purpose of TD, so all the borders will go - this application to the new j allows to hide the textarea rather object only.

  Andy

• Is there a waterproof box for the Apple Watch of 38mm?

  l'm looking for a reliable sealed subwoofer for my Apple Watch of 38mm. Everywhere I looked was up here only for the 42mm case. If anyone has any suggestions please let me know.

  Hello

  Sorry, but I'm not aware of any waterproof box for the 38mm Apple Watch.