Text by jumping on the edges of the text frame

Hello

I need to work on a pressing deadline and for some reason when I type text in a text block, jump around the page in the block of text and is not in the domain of the main work? If I did drag the text block in the working paper the text disappears?

Any help would be much appreciated as I need to get this finished this weekend

Please see the attached screenshot

Regards, Ryanflyer text.JPG

Looks like it could be a wrapping of text on an image behind. Select the block of text and object > block Options text check text dressed not ignore.

Tags: InDesign

Similar Questions

  • Pre-loader jumps to the wrong frame

    It is a bit of an odd-ball problem. I have created a site Web 524 long chassis, but creates the prestressing bar * after * the Web site is done. I could move all the frames a bit more, but that would require remapping all my buttons a lot, a lot. What I did then, tells image1 go to 525 of the frame, and put the preloader. I note the site works perfectly without the front loader, I just want it to be smooth, once it makes it online.


    The following code is used for the first frame (frame 525) of the front loader:

    bytes_loaded = Math.round (this.getBytesLoaded ());
    bytes_total = Math.round (this.getBytesTotal ());
    getPercent = bytes_loaded/bytes_total;
    this.loadBar._width = getPercent * 100;
    this.loadText = Math.round(getPercent*100) + '% ';
    If (bytes_loaded, bytes_total)) {}
    this.gotoAndPlay (2);
    }


    The following code is used for the second picture (frame 526) of the front loader:

    this.gotoAndPlay (525);


    Now, for a reason inexplicable, my site begins to frame 390 and I never see the load bar. Once again, without the script on frame 1 (a simple "gotoAndPlay (525);" ') the site works perfectly well.

    Any help anyone could give would be appreciated.

    Flash is responsible for frame 1 of the main timeline at the end of the main timeline.  When your frame 1 plays flash try to run your goto, but you have less than 400 executives.  so he does the best he can and play the weft 3xx.

    Bottomline: your approach is erroneous and does not work.  you need to rethink your design.

  • Windows 8 cursor jumps in the existing text and continues to type here rather than the finish line that I am on, anyone else spotted the same thing?

    Just upgraded to Windows 7 to 8, using MS Office Word 2010, worked well on Win 7, but now type text and the cursor suddenly jumps into the existing text and continues typing, rather than the finish line that I'm on.  Thought, I was accidentally touched for touch pad or other keys, so now consciously look for this but can find nothing on my part.  Have experienced it before with a processor OS Linux and Open Source, when the OS has been updated.  Think there may be a loophole to WIN 8.  It also happens when keying in the screens like this, that has happened twice while here. Someone else spotted the same thing?  Or is it just me?

    Also, anyone know how to disable "Open Tap" on the Mouse touchpad of the notebook, its annoying, I could disable in WINDOWS 7 but cannot know how Win8.

    Thank you very much for your help, the setting was not really there, but you gave me the name of the device, so I was able to download the right driver from

    http://www.Synaptics.com/resources/drivers

    above mentioned just in case anyone has the same problem. The site recommend to go with the hardware vendor's website, but ASUS has wrong driver, one of the above works fine.

    Its such a relief to be able to settle this problem - THANK you

    Lets see if it sorts the problem MS Office too.

  • track text edits in FrameMaker 12 jumps whenever the text is accepted or rejected

    Is there a way to avoid this? Sometimes I want to accept a single instance of text followed, and I don't want that she jumps into the next Edition text crawler. I want him to stay exactly where it is. Is there a way to do this?

    What function do you use to accept/decline a change?

    There are several modes available (see Manage_track_text_edits ): accept/reject & see the next; Accept/reject; See the previous; Accept/reject all. There is the corresponding boxes on the taskbar buttons for these institutions.

    It looks like using your Accept and see the next, so you should only use the function agrees to modify for a single instance when you put ' t want to move on to the next.

  • Cursor jumps at the end of the text when you edit the item

    I use a Javascript function, toUpperCase() to convert input in a text field.  However, when users would like to change a piece of the data string in the text, the cursor changes a character only before jumping at the end of the text and continuing.  This function causes the worsening users.  How can I keep the cursor in the right place within the chain and use always toUpperCase without the cursor jumps at the end of the string?


    Thank you!

    the best way to test is to remove OnKeyUp = "this.value = this.value.toUpperCase (); ' then check if you still have the problem

    strange that the problem's there even when you replace OnKeyUp with onChange because the function must not be executed until the change is complete. Also replace OnKeyUp, onBlur

    share the results

  • Why my text jumps to the next column?

    This problem is really frustrating me and I can't find answers. I jump to the next column/text frame, but there is place at the bottom, above the footnotes page. What is happening with a number of images. I played with the keep Options and page layout Document footer, but none seem to solve the problem effectively. So you see what I'm talking to you, here's a screen Cap. Notice the widow jump to page 7 top - 'traffic and pollution.

    Screen Shot 2014-08-12 at 10.04.16 AM.png

    It is not clear to me from your answers if you tried to pay Dungeon with next to 0. The way that your keep screencap Options, shows you each paragraph BODY keeping with at least 2 lines in the following paragraph. This would force a line to the top of the page, since there is not enough room at the bottom of the previous page to the last line and two more.

    In general, Dungeon set with nearly 2 for managers (not body copy), so that the heads don't end up alone at the bottom of the page. In general, set the copy body on the lines to keep together, usually 2 to start and end, but keep with next to 0, so ID can break between graphics.

    Another thing I noticed about the notes: from time to time ID gets 'stuck' in a certain paging, even if you could make changes that should bring it to reflow. Force it to reflow after having changed, cut and paste the text you want to redistribute.

    Ken Benson

  • Jump to the top of the column of text - why?

    Ignoring the header of the bust area...

    Looking at the two columns of text below...

    Why the text in column 1 jump to the top of the column 2 and leave a space?

    The two top lines in column 2 must be inserted at the bottom of column 1, but they jump to the top of 2.

    If I add returns from cart at the end of the two lines at the top of column 2 of form magically in column 1...

    Any help would be greatly appreciated.

    Untitled-1.jpg

    It is difficult to tell from the picture.

    But check the keep Options http://help.adobe.com/en_US/indesign/cs/using/WSa285fff53dea4f8617383751001ea8cb3f-6dd2a.h tml #WSa285fff53dea4f8617383751001ea8cb3f-6dbea

  • NB200 - cursor jumps around the screen while typing

    Hello

    When I type in MS Word or OpenOffice or any other text box on a Web site for example flushing prompt that identifies where the next word/character must be placed around the screen jumps.

    So when I type a line of text I then start another line below and then without reason, that the text cursor jumps to the top line. This inserts text in the wrong place, which is incredibly annoying!

    Any help or ideas greatly appreciated!
    Thesis writing will be more months if the problem persists! :)

    John

    Here is the solution I've used and displayed a few threads down...

    Under the properties of the mouse, click on the "Advanced" tab, click on the pointer speed and Tapping settings, in the new screen click setting Tapping, on this screen, check the box that says disable Tapping during the key entry.

    You will suffer is not since the Cursur jump you met more...

    HTH,

    The f

  • ANNOYING JUMPS AT THE BOTTOM SLIDER O R AT OTHER TIMES, JUST SOMEWHERE ELSE, UPWARDS, DOWNWARDS - WHERE EVER!

    on my acer laptop my cursor jumps to the bottom of the page whenever I click anywhere to highlight the text or insert the words, corrections, etc.

    A FEW TIMES THIS APPLIES TO ONLY AREAS OF TEXT, APPARENTLY WITHOUT REASON OR MAYBE I ACCIDENTALLY HIT SOME KEYS IN THIS PARAGRAPH AND NEVER HAVE THE FREEDOM TO WORK IN THIS ARTICLE ARES, I TAPE AGAIN. Help, please

    Noreen Hello,

    It is common on laptops and is usually caused by your Palm or fingers inadvertently hit the touchpad when typing. The only surefire fix for this is to use an external mouse with Touchpad "disabled when an external mouse is present".

    To disable the Touchpad go to the Control Panel, Device Manager and look under the tab mouse (Alternatively, it might be under the HID (Human Interface Device)). If you need specific help to do this, please post here your laptop brand.

    Let me know if this helps you.

    Kind regards

    BearPup

  • Table jumps to the left with long pages

    I use Dreamweaver CS3 and it works fine. But when I paste long text (words for an artist) pages did a little 'jump' to the left just a 4-5 mm. Use centered tables. Does anyone have a solution to this problem?

    Best regards
    Karl Henrik

    Karl.Henrik wrote:
    > I use Dreamweaver CS3 and it works very well. But when I paste long text
    > (words for an artist) pages is a little 'jump' left just a 4-5
    > mm. Use centered tables. Does anyone have a solution to this problem?
    >
    > Best regards
    > Karl Henrik
    >

    Difficult to say without seeing the code - you can post a url?

    If you can not, for some reason, post your url or code - try this in
    your css file and see if that sorts the problem...

    HTML, body {min-height: 101%; margin-bottom: 1px ;}}

    HTH

    --
    Chin chin
    Sinclair

  • Jump in the middle of an audio track streaming on various sites causes the stuttering and audio glitch

    Hello

    Please refer to this thread for support on the technical support of SoundCloud forums. The thread contains all relevant information, including videos of the screenshots problem and console, made by myself and others. https://www.soundcloudcommunity.com/SoundCloud/topics/skipping-to-the-middle-of-a-track-causes-stuttering-and-glitchy-audio-chrome-Firefox

    In short, when you try to move forward for streaming audio, there is a memory buffer/stuttering problem that prevents a correct reading of the track. This problem is confirmed on SoundCloud and Traxsource and other people in the support thread mentioned Mixcloud and other streaming sites. In other words, it is not the special streaming service fault or another.

    The problem does not occur in Microsoft Edge, Internet Explorer or Chrome. Well, to clarify, when the issue was published on SoundCloud support forums, Chrome was having the same problem. However, they made a version a few days ago thrust, that fixed it.

    Here's my original on the SoundCloud support post (less), which has the relevant details. Note that we have updated both Flash and Firefox recently, so although I have mentioned earlier in my original post, everyone involved has since updated their browsers and Flash.

    From now on, the only solution for the problem is to go back to Firefox 40.0.2. Thanks for any help =)

    Matt

    Original message =.

    Jump in the middle of a track causes the stuttering and audio glitch (Firefox).

    I am running Windows 10 Pro.

    There seems to be a problem of caching that affect reading - I started noticing this problem three or four days ago. Previously, I could jump through my feeds at will, go straight until the middle of the tracks or mixes of listen seconds and determine if I liked the track. Now, I can't do it on Firefox 41.0.1. The problem is simply annoying on songs that are 3 or 4 minutes in length, as I must leave "cache" maybe ten seconds before jumping. Unfortunately, the problem is a game-breaker on mixtures which, for example, are 90 minutes long. If I jump to a point directly in the middle of the combination, nothing happens. The play button alternates between the 'Play' symbol and the symbol of 'Caching' ('... "), and so audio resumes, it is glitchy and consists of different parts of the track being played at the same time.

    I've eliminated my internet connection as the source of the problem by loading on board. On the edge of 20.10240.16384, the problem does not exist. I can scroll down to any mix of 2 hours in my stream, click on the middle of it, and the audio starts right up. No caching, without stuttering or glitching.

    I drove back Flash version 18 to see if it solved the problem in Firefox, but it did not. The problem persisted, so I re-updated to Flash 19.

    Yes, I understand how all versions and updates to work. I meant it as a generation of powder magazine. My bad.

    I consider this problem to be solved. Several different pre-release versions of Firefox have solved the problem; I have personally used both of them that work perfectly. A representative of Bugzilla stated that the patch will be integrated into Firefox 42, which will be released on 3 November.

    https://www.soundcloudcommunity.com/SoundCloud/topics/skipping-to-the-middle-of-a-track-causes-stuttering-and-glitchy-audio-chrome-Firefox?topic-reply-list [Settings] [filter_by] = all & question-answer-list [parameters] [reply_id] = 16269116 #reply_16269116

    I now consider this private matter. Thanks to all of you who have been here =)

  • When I write in Hebrew, from right to left the periods/quotes/points to mark the end of the sentences jump at the beginning of the sentence. Help

    I can't format a message correctly when I write in Hebrew, from right to left
    even if I press the left margin and the message starts from the left side, all points mark and end of sentences (periods, etc.) jump to the front of the sentence and quotation marks or the marks of separation, (such as hyphens), divided the lines and words leap to the front of the sentence.
    How can I change the formatting for this problem so that the recipient receives a correctly formatted e-mail?

    you use in the bidi module?

    https://addons.Mozilla.org/en-us/Thunderbird/addon/bidi-mail-UI/

  • My iPhone 5 c screen jumped in the upper right.

    My iPhone 5 c screen jumped in the upper right. I didn't give up and he was in a protective case LifeProof. What should I do? Apple will fix it if it's a defect?

    sounds like it's battery problem growing they will repair it under warranty if you still have the warranty of the cause

    If not, they will charge you

  • Frustrated with Apple music early jump to the next song.

    Does anyone have a solution to keep the Apple music to jump to the next song before the end of the song that is currently playing?

    My iOS is updated and I play it back via SONOS on a home network routed through the latest AirPort Extreme wireless.

    I'm about to go back to Spotify.

    I had this before and it turned out be be very low space on my device and / or bad internet connection? Other that that, I don't know sorry.

  • When scrolling through web content, screen jumps to the first page after a few seconds, how do I solve this problem?

    This problem just happened while looking through the Mozillza support site.

    while scrolling (two finger or with scroll bar) , after a few,(3-5) seconds, the display jumps to the top of the page.
    

    I only have usually a website open at a time and this was the case during this most recent event.
    Please, couch answers in simplest terms as I am old and unfamiliar with techspeak. Thank you!

    Have you noticed any other unusual behavior?

    In the case where one of your extensions is concerned, could test the page Firefox Safe Mode? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

    You can restart Firefox in Mode safe help

    Help > restart with disabled modules (Flash and other plugins still works)

    In the dialog box, click on 'Start mode safe' (not Reset)

    Any difference?

Maybe you are looking for