AMD-FX6100 run a bit hot in HP pavilion h8m

Similar Questions

• VMware® Workstation 8.0.4 you will only be able to run 32-bit nested vMs

  HI people,

  I did a forum search tried a few things suggested previously, but not joy.

  I get this error message

  Virtualized intel VT - x /EPT is disabled for this machine virtual esx
  you will only be able to run 32-bit nested vMs

  =================================

  The host OS is Windows Server 2008 Enterprise Edition, 64-bit 6.0.6002 Service Pack 2

  VMware® Workstation 8.0.4 build-744019

  
  The server is an HP ml350 g5 zeon 5420 cpu quad core server

  
  history esx 5i was installed on bare metal, I formatted and installed server 2008 x 64 sp2

  
  the bios is the last

  and these bios options are set

  Intel VT enabled,
  and no. execute activated too memory.

  ==============

  I understand that when these changes are made to the host should be recycled to power...

  
  This bios like many others after record changes usually f10, the changes are made and this server restarts

  is this normal?

  don't know what means VMware by power cycle

  I have disabled you options to see if I get an error that I saw the jpeg format

  (called) when the vt is disabled in the bios

  He talks about power cycle the host,

  I have the new option that was just to see if the vmworkstation was reacting to the bios actullaly.

  It has been.

  ============================================================

  
  all this should be good as the tool VMware-comments 64check - 5.5.0 - 18463

  reports

  This host is capable of running an operating system of 64 comments

  I ran it under this vmware product.when on my host Server 2008 x 64 sp2 enterprise.

  =============================

  I installed vmware workstion 8.0.4 on windows 2008 x 64 sp2 build-744019

  then I installed esxi 5 all right

  under custom options for the CPU, I chose Intel VT - x or Amd - V
  ==================================

  
  but when I opened esxi 5

  I get the error message #.

  Virtualized intel VT - x /EPT is disabled for this machine virtual esx
  you will only be able to run 32-bit nested vMs

  
  so I tried this

  
  Add the following line to C:\ProgramData\VMware\VMware Workstation\config.ini:

  hv.assumeEnabled = 'TRUE '.

  I also put this line

  hv.assumeEnabled = 'TRUE '.

  C:\Users\Administrator\AppData\Roaming\VMware\preferences.ini

  
  but still the same question after stop downs and restarts too

  I stop the physical server and restarts too

  =======================================

  = cpuid tool shows the processor is correct to because he had esxi 5 installed on bare metal before

  Information for processors
  -------------------------------------------------------------------------

  Processor 1 ID = 0
  Number of hearts 4 (max. 4)
  Number of threads 4 (max. 4)
  Name Intel Xeon E5420
  Codename Harpertown
  Specification Intel Xeon E5420 @ 2.50 GHz CPU < < < < < < < <
  Package (platform ID) Socket 771 LGA (0x6)
  CPUID 6.7.6
  Extended CPUID 6.17
  Core Stepping C0
  The 45 nm technology
  Basic speed 2500,0 MHz
  X FSB multiplier 7.5 x 333,3 MHz
  1333,3 MHz rated Bus speed
  2500 MHz frequency stock
  Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, > > > > > > > EM64T, VT - x < < < < < < < < < < < <
  Data L1 cache 4 x 32 KB, size 8-way line set associative, 64 bytes
  L1 instruction cache 4 x 32 KB 8-way line set associative, 64 byte size
  L2 cache 2 x 6144 KB, size 24 channels line set associative, 64 bytes
  FID/VID control Yes
  Range FID 6.0 x - x 7.5
  Max VID 1.225 V

  =========================================================
  My query

  These settimgs are supposed to be done in the two files above and in brackets ""

  must they be carried out before the esxi is actually installed in the workstation 8 or after.

  
  SO IMHO workstation notice 8 is misinterpreted something on my hardware.

  The ideas people?

  I have tried several combinations but no joy...

  
  Thank you
  chessguy

  chessguy wrote:

  @all

  Hmmmm...

  so with the options checked in workstation should it work,.

  (I tried it did not work)

  I don't know if I still need the lines edited in two places during the use of this option?

  and should it be done before that Esxi is installed in the workstation 8?

  or is the line of editing out of place now?

  Line editing is not relevant for your situation, since your CPU does not have the characteristics necessary for the virtualization of hardware support virtualized.

  If this server supports Esxi 5 bare metal because it was installed when I got it...

  First option get a processor that supports the corrrectly but if Intel specs are misleading where should I start... ???

  under kernel options for this doc of quickspecs ML350 g5 Server

  There are a variety of processors. any suggestions on one. ?

  http://h18000.www1.HP.com/products/QuickSpecs/12475_na/12475_na.html#core%20Options

  ========================

  None of these processors will help.  You need at least a CPU E55xx for HV virtualized.

  Option 2) now on this bare metal Esxi 5 with this current processor can I install 64-bit clients? (guess I'll try soon) but I would like to know... all ideas welcome...

  Yes, no problem.

  should I just particularly setttings in ESXi5?

  N °

  All the options for me to set up a laboratory for vsphere upward with this as is, or with the new processor?

  IMHO if not I could use 2 of these physical servers if I can get another assumption, that he would need to be the same?

  to try they full of features of vsphere. like HA, Vmotion etc.

  No, he would not have to be identical.  No matter what CPU Intel x 64 of this vintage, or later would be compatible with EVC (well well, with the exception of Atom).  You need only an identical processor for tolerance to failures.

• Machines which can run 64-bit images?

  I'm sure you've seen this question so many times in the forum alone so I'm sorry if I'm repeating old son.

  Soon, my company will need to run 64 bit on their vmworkstation images 7 However, I understand that not all machines can run 64-bit images without worrying if they are 64-bit.  I have run the verification tool 64-bit on computers in my company and a list that may or may not run 64-bit images.

  It turns out that we may have to replace some of our machines because they cannot run 64-bit (including my own) images.

  My question is, what I look for when choosing new machines?  They say generally if it can run 64-bit images or not.

  Thanks in advance

  Marc

  Any AMD 64-bit processor that you can buy at retail today can run the 64-bit clients.  Intel 64-bit processors also require VT - x.  See KB 1003945.

• I've updated Windows 8.0 Windows 8.1, since Firefox run a bit oddly. In particular, when on the sites with lots of images like Facebook, etc.

  Hello, I am writing because I have a few problems with my favorite browser after update to 8.1 Windows. Here are some details. I've updated Windows 8.0 Windows 8.1, since Firefox run a bit oddly. In particular, when on sites with lots of images like Facebook. It's as if there is some sort of effect of Flikr between the office and the images, as well as between the images and the browser (a bit like old flikering of 16-bit video games). It's not too bad, but it's a question. I tried to reset firefox and restart the computer. I have not tried a repair, and I haven't done an uninstall.

  Hello, disable hardware acceleration in firefox should a restart of the application is taken into account. have you tried that too?

  Please also see if there is an available update your graphics drivers ...

• Re: Satellite T130 - can I run 32-bit Client VPN on Windows 64-bit?

  Just got my T130 yesterday but unfortunately realized, it is a machine that is 64-bit and all my corporate apps like VPN Client 32-bit (like all our Office Tools). Is it possible to run 32-bit on this platop mode please... ?

  Thank you for your support.

  Hello

  I agree with the user above. According to your VPN software it will maybe work on 64 bit OS because it s also able to handle 32-bit programs normally

  In your case I would try to install the software and then you can give us feedback: how it works. It would be interesting, and I think for other users. :)

  Good luck!

• Chipest AMD w8.1 64-bit drivers

  I want to

  Chipest AMD w8.1 64-bit drivers

  my lap is probook g1 450

  Hello

  Download, save & install the following driver, rebooting the system after installation.

  The AMD graphics driver available in the site to download your product comes with driver chipset:
  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_124491_1%257CswEnvOID%253D4158%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Alternatively, you can download the first file in this link:
  http://support.AMD.com/en-us/download/chipset?OS=Windows+8+-+32

  Concerning

  Visruth

• Risks for adding memory to windows AMD Turion 64 / 32 bit operating system - 2 Questions

  Can I add memory to the system of memorization of the AMD Turion 64 / 32-bit operating system, without damage to the laptop computer through Microsoft?

  Hello
  You can add memory and I suggest you to contact the manufacturer for assistance on this issue.

• 64-bit to run 32-bit? for a device driver

  I have a usb bridge to run 32-bit on a device driver, how can I run 32-bit only for this program only.

  Would love to know the answer!

  Hi vincentmenzies,

  Device designed for 32-bit Windows drivers will not work on 64-bit Windows.

• Error.' c:\docume~'\earl\locals~1\temp. A temporary file needed for initialization could not be created or cannot be written in ' when try to run 16-bit programs in windows xp computer at home.

  original title: 16-bit windows subsystem error

  I was able to run 16-bit programs on my computer with windows xp home edition. now when I try to open the program I get a 16-bit windows subsystem error. c:\DOCUME~'\earl\locals~1\Temp. a temporary file needed for initialization could not be created or cannot be written to. Make sure that the path exists, and the space is 'close' to teminate the application available.choose

  Hi EarlBettencourt,

  You can follow this link & check if the problem persists:

  Error message when you install or start an MS-DOS-based program or 16 - bit Windows based

  Hope the helps of information.

• I have Windows Vista 64 processors w/a & able to run 32-bit & 64-bit programs. How can I go about installing of some 32-bit programs?

  I have a Windows Vista Home Premium with a 64 processor. It is able to run 64-bit programs and 32-bit. It seems (wired) LOL, to run 64-bit programs. I understand that it saves space on the CPU?  I'm desperate to run the most recent version of Adobe Flash Player, but it will only work in 32-bit version of Windows Vista. Is it possible that I can get there?  I checked my system & under Internet Explorer 32-bit, the only programs are JAVA STANDARD VERSION 6, version 1.6.0. & Speech text... Is there anyway I can use my 32-bit version of Internet Explorer to run some programs that I can't run currently not using the 64-bit version of Internet Explorer?

  Hello

   
  1. what happens when you try to install 32-bit programs?
  2. you receive an error message?
  3 are you facing this problem with any program in particular?
  4 is that the problem is with addons like adobe flash player works only in Internet Explorer?
  
   
  Most of the programs designed for the 32-bit version of Windows works on 64-bit Windows version. The notable exceptions are many antivirus programs. Device drivers designed for the 32-bit version of Windows do not work on computers running a 64-bit version of Windows. At the same time the programs designed for the 64 bit version of Windows will not work on the 32-bit version of Windows

• How to solve (can't run 16-bit windows) Windows vista.thanks in advance

  try to load a legacy program that requires Windows 3.1

  Hello

  Windows Vista does not include a 16-bit subsystem. You will not be able to run 16-bit applications on Windows Vista directly.

  You can check if the program works in Windows XP compatibility mode.

  Make older programs in this version of Windows

  If you use Windows Vista business, Windows Vista Enterprise or Windows Vista Edition integral, you can try to install Virtual PC and then you can install Windows XP on your virtual PC to run 16-bit applications.

  You can download Virtual PC for Vista from the link below:
  Download the full version of Microsoft Virtual PC 2007.

  Virtual PC 2007: Run multiple operating systems without "multiboot"

  Hope this information is useful.

• run 32-bit programs on 64-bit systems

  I am not very computer and reflected and clicking on things on this forum for the last three days and still have not thought about it.

  can someone explain please how to fix this problem in a simple language. Thank you

  http://Windows.Microsoft.com/en-AU/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  32-bit and 64-bit Windows: frequently asked questions

  Here are answers to some common questions about the 32-bit versions and 64-bit Windows.

  Can I run 32-bit programs on a 64-bit computer?

  Most of the programs designed for the 32-bit version of Windows works on 64-bit Windows version. The notable exceptions are many antivirus programs.

  Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit version of Windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows. If you don't know if there is a 64-bit driver available for your device, go online to the Vista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center

  .

  See you soon. Mick Murphy - Microsoft partner

• When I click on 'Run 64-bit DxDiag' the DxDiag tool closes.

  Original title: DxDiag 64 bit problem

  How can I run 64-bit dxdiag?  I tried opening dxdiag & clicking on the 'Run 64-bit DxDiag' button on the bottom, but it doesn't close the window.  What I am doing wrong?

  Hello
   
  Method 1.
  When you click on run 64-bit DxDiag it minimizes the window. But it performs the test and you can click next page to view the errors.
  If the page closes directly can be a third-party application is causing the conflict. Let us check if the problem exists in the boot. See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
   
  Method 2.
  For more information about the DxDiag tool, refer to the article below.
  DirectX: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DirectX-frequently-asked-questions
   
  Run the DirectX Diagnostic tool
  http://Windows.Microsoft.com/en-us/Windows-Vista/run-DirectX-Diagnostic-tool
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I run 16-bit programs in Windows 7 64 bit?

  I'm running on Windows 7. Windows 7 does not run16 ILO programmes, e.g. Dbase III. Windows XP run 16-bit programs. How can I integrate windows XP running 16-bit programs?

  Wednesday, June 9, 2010, 06:47:42 + 0000, Ronin Loki wrote:
   
  > I am running on Windows 7. Windows 7 does not run16 ILO programmes, e.g. Dbase III.
   
   
  This is not quite accurate. 64-bit Windows 7 (which must be what you)
  have) does not 16-bit, but Windows 7 32 bit programs.
   
   
  > Windows XP run 16-bit programs. How can I integrate windows XP running 16-bit programs?
   
   
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
   

  Ken Blake

• No noise *-HP ENVY dv6t Quad Edition CTO (product: B6C68AV)-running 64-bit Windows 8

  HP ENVY dv6t-7200 CTO Quad Edition (product: B6C68AV)

  Running 64-bit Windows 8

  QUESTION:

  I had no sound * on the 'go get' speakers (that is, from the cooktop for the first time). I say no sound with an asterisk (*) because it makes noise, just everytime he tries to make the sound he is supposed to make ends up looking like a noise low echo a little sound for a movie like "Friday the 13th" when Jason is lurking in the Woods (i.e., cheh-Shh-Shh-Shh... kah-ka-ka-ka). At no point has the appropriate sound has played from the speakers (start, stop and everything in between)... it was either the noise low echo or a sequence of tick-tick-tick sounds.

  TRIED SO FAR:

  So far, I tried to solve problems by using the information below:

  http://support.HP.com/us-en/document/c03257712

  I tried each of the 'steps', but none of them are able to solve the problem. I should mention that it runs that diagnostic stuff are not errors... it seems to "think" the speakers work as it should.

  I've seen many "solutions" here who describe the new drivers download (even though when I clicked on the audio driver update, it said it was updated). It makes sense, why one would need to do if the computer came originally pre-loaded with Windows 7 and the new OS W8 won't play nice with all the drivers existing, but I guess for me it is not make sense why a brand new computer which has Windows 8 pre-loaded would be defective right out of the box like that. Quality control does not check if the speakers correctly? Or could it just be a flaw introduced somewhere in the process of packing/shipping-related?

  I would phone HP and request repair under warranty. Select your country here for the info page > Contact HP Envy The series has a separate section on the page of phone numbers.