Text cannot be changed once I put it to the point!

Similar Questions

• Text cannot be changed enough in Courier Photo (11 items)

  Hello everyone, a little help required please...

  Just purchased 11 items - excellent product at the price and have a lot of fun to use.

  One frustrating flaw within the picture messaging service...

  I use Adobe email service and it sends mail with very well set up the account as required.

  Each new e-mail is displayed with the text "here are the files that I want to share with you."

  Now, I would like to replace it with different text.  I can remove it and replace it on the first edit page, and he stayed there after I click 'Next' to the "Customize layout" section following.

  By clicking 'Next' after this page, we have the final page of e-mail, and the text has once again returned to "Here are the files I want to share with you..."

  I can remove it again, but can't type in any other text anywhere on this screen.

  Any help with this?

  Pity, because the program is generally great.  Have transformed a number of photos already, and it would be good to use the built-in messaging prog to the I want to use, add such text as required.  Otherwise, why have all the available if no choice of fonts and layout?

  This difficulty around works - bit tedious, but it works very well.

  I want to report the bug to Adobe, but to be honest, it was a nightmare just register here first!

  Very happy to be here, however and much appreciated responses to my thread providing assistance.

• Change once Lumetri and touch all the clips.

  I've done a bit far in the editing process and now I need shade of color (big mistake, I know that, don't remind me).  However, I'm just curious (and it would be useful for future reference, regardless of the preliminary planning), , but is it possible to change the Lumetri to a clip on a Premiere Pro timeline (imported in SpeedGrade) and have that change automatically ripple through all the other clips with this same effect of applied Lumetri?  It would be useful if I wouldn't apply for re - apply the new Lumetri effect to thousands of other components of the package individually if I change one aspect of quality (for example, a contrast of shadow).  Is there a way to do this easily within SpeedGrade?

  I use CC 2014, by the way.

  The best way to do... like you do a link Direct from PrPro? ... is to put a layer of control over the area of the timeline that you want to change in PrPro, then when D - L on SG, rank this adjustment layer. Or if say you have a clip of 'master', a long, you have cut & used pieces, you can use the Master Clip effect and all ranks, long you do the first instance of which your sequence will be automatically passed to all other cuts that longer clip.

  Past typical practice was to change to lock in "final" edition, and then send colorist of ranking, then Fx, then return to the editor for the final touch. In fact, with the model CC they set up so that one can rank at any time if you have your own editing & ranking.

  Neil

• For the installation of Visual Studio 2013 and 2015, cannot be "changed" dialog "Programs and features" in the control panel of Win7

  In addition, Visual Studio shows a split second start screen, then disappears without any messages.

  Moreover, the same result occurs if I use the installation for each program file. In other words, the execution of the installation executable starts the Visual Studio splash screen, then disappears.

  No similar behavior occurs with any other executable installation files or the programs that are listed in the dialog box programs and features in the control panel of Win7.

  Same behavior occurs in safe mode.

  Hello

  Your question is beyond the scope of this community.

  Please post your question to the MSDN Visual Studio Forums.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio

  See you soon.

• I have a license of an image that is a vector, but it is a vector of flat and cannot be changed with no layers. Are the vectors of Adobe Stock like that?

  When I buy stock of Shutterstock and iStockPhoto vector, it gives me all the layers and is fully editable. I downloaded 2 Adobe Stock vectors, and are flat images, unexpandable with none of the layers. Is this the case for all vector Adobe stock?

  I solved this problem by right-clicking on the image in my library and choosing 'edit picture '. It opens in a have another file, and I can then edit each individual item.

• Hide the list button dropdown object except when he put there at the point on the field?

  Is there a way to hide the object from the dropdown list of the button (only) when it does not focus on this field drop-down list? If the button is not visible until the user clicks this drop-down list is not visible when the user leaves this field drop-down list. As the functioning of the object date.

  If you set access for the field read-only by default, they can still enter the field to display the button if you put the above script if the entry...

  I hope I understand correctly, this method should work perfectly if your goal is to hide the button from the drop-down list

• When I put an and THE points in my timeline first I run the risk of deletion of an entire track of clips. Is there anyway I can percentage it?

  I lost a lot of work because of this. I keep large enough back ups, so, fortunately, nothing is lost except a few hours of work. I tried for a few years to be super careful and I just delt with having to rebuild the areas, but the project I'm on in this moment is really wide, and I've had a client several times now, pointing out that things are missing that we had worked on. This reflects very badly on me.

  Thank you

  Heath

  Heath,

  Sorry that I misunderstood your question.

  the Erase function while using IN outs is useful for some people, but I've never used

  check my track targets so I delete not hundreds of hours of work.

  Ah, I see what is happening now. Unfortunately, this is how most NLE works in general. If the securities are covered, the clips are subject to deletion between In and Out of brands. With this power can actually work in your favor in many cases. For that matter, what I would focus on creating and memorizing keyboard shortcuts allowing you to alternate selection and locking.

  That said, I share your frustration that NLE is always the way you want to. If you really can't stand this behavior, you can still file a feature request.

  Other than a feature request, the only solution of continuously improving your workflow around the application works to make less mistakes. Memorize shortcuts keyboard, expansion and contraction of the user interface according to your current task, are examples of using the simple methods to help you work faster and more efficiently. I've been publishing for decades and always find ways each day to save time, especially measures relating to repetitive tasks.

  I call NLE editing "dance on a gimbal. What I mean is that you don't have to pay a lot of attention to your physical actions as you perform the operation of the brain of the edition. As an editor, I do most of the errors when my brain wants to go faster than my hands and I make mistakes such as the removal of clips, that I didn't. If you make mistakes, slow down a little and be more deliberative in your edition of keystrokes and mouse movements. Of course, Ctrl/CMD + Z is your friend. Please also familiarize yourself with the history panel and make sure that your automatic backup works. Do save money for your project as often as you like, as well.

  Please feel free to comment or ask questions.

  Thank you

  Kevin

• Variable width tool not work - cannot adjust the position of the points of width - Illustrator CS6

  Hello

  I'm having a Mare with variable width tool in Illustrator CS6...

  When I add points of variable width for a stroke I can't move the position of the decimal point of width. I watched several videos showing the width point slide seamlessly along the racing line - but I am unable to do this in my session of Illustrator!

  However, if I move the cursor width-tool on the end of the race only point, a (~) symbol will appear and I am able to slide that point only along the race. But this isn't a suitable way for me to realize the effects I'm trying since.

  I would be very grateful of any advice or experience with this issue.

  Thank you very much!

  When you create a new point width, you can move it in the direction of width but does not change its position. Howeven after the point is created, you can move your cursor near the point which is along the central axis of the race, to move along the racing line.

  You can also watch http://tv.adobe.com/watch/csinsider-design/illustrator-a-closer-look-at-the-variable-width - tool-for-illustration /

  Let me know this was useful.

• How to change the text in the paint once I clicked outside of the text box?

  How to change the text in the paint once I clicked outside of the text box?

  How to change the text in the paint once I clicked outside of the text box?

  ====================================
  I guess you could go to... Change / Cancel... then again...

  FWIW... the free Picasa software has tools to add text to photos.

  Picasa
  http://Picasa.Google.com/

  How to add text to your Photos using
  Google Picasa 3
  http://www.ehow.com/how_4599330_text-photos-using-Googles-Picasa.html John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Text PDF format appears not, cannot save changes

  I tried to understand how being saved text format appears when you open a PDF form.

  I did a lot of troubleshooting and here is what I have so far.

  PDF - form has been created in Adobe InDesign CS6 (Mac)

  -The text appears in SumatraPDF, Mozilla's PDF reader

  -The text is visible for half a second then disappears when opening in Adobe Reader 11 and cannot be seen (even when the cell is clicked, as others have pointed out)

  -Same thing happens in Adobe Acrobat 9.0 Standard except that it is rather the second 1/8

  -The text does appear quite in FoxIt Reader, Nitro Pro 9, Nitro Reader 9

  -In addition, if the user tries to open, to modify fields, record, none of the changes stick

  It seems that any reader/PDF Editor that supports editing of form field does not display text, but who does not display the text just fine (Mozilla, SumatraPDF). I tried to add the ".js file" for fixing forms Adobe Acrobat and Reader, but it makes no changes. I am troubleshooting for an end-user who must be able to open, edit and save these PDF files. No indication as to what is happening here would be greatly appreciated!

  Thank you!

  The reason is that the form is reset when the document is opened. I could be to blame for this, I promoted this technique long ago before the player was able to save a completed form. It was useful for online forms so that historical data would not fill in the fields if the form had been reopened. For a number of reasons, is no longer a good reason to do so.

  To work around the problem, you can temporarily disable JavaScript and form don't get reset when it is open. You can also remove the script in the opening event of the Page the first page if you wish.

  The reason why you see different behavior with different viewers is because some of them support the JavaScript that is used and others do not.

• Cannot view pictures when I put the cd in the disc drive.

  I have pictures on a CD that I saved from my old computer. When I put the disc in the drive and I chose autoplay it I cannot see all of the photos. It shows the autoplay and then asks me to adjust these settings or revert to the default value. Once I put them and press on save the box disappears, and then I'm back and the control panel. I would like to know what I'm doing wrong.

  Hello bfiebiger10,

  Thank you for using Microsoft Vista answers Forum!

  What is the file format of the image file you are trying to open? I guess they are in .jpg format. You may need to use the default program features to set the program you want Windows to use for open your photo file.

  To set the default program to use the following steps:

  ·        Click Start > default program

  ·        Choose to associate any type of file or Protocol with a program

  ·        Select the type of file (file format) in the list, and then click Change Program

  ·        Choose the program that you want to use to open this file (e.g. Windows or MS Picture Photo Gallery Director) and click OK

  ·        Click close to exit from this window

  Try to open your CD again. Go to the computer; Double-click the CD icon to open it

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• When the voice is on watch unlock and faces cannot be changed. Why?

  What a voice on East of quarter won't open and faces cannot be changed. Why?

  Hello

  To unlock your watch when VoiceOver is enabled:

  -Press the digital button Crown or on the side once to go to the password screen.

  -Press each number once to select it, and then quickly tap twice again on this number to enter.

  Once the Watch has been opened, press firmly on the screen displaying the time in order to access the customization options of watch face.

• How stop the little black box that is a copy of what is on my mouse to come when I put it on the text?

  Original title: changes of mouse

  How stop the little black box that is a copy of what is on my mouse to come when I put it on the text?

  Hello

  1. have you made changes on the computer before this problem?
  2 have you tried to change the theme or settings and check mouse?

  Read the following article which can be useful:

  To change the appearance of your mouse pointer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/WIN_POINTERS_CHANGING.mspx?mfr=true

  If possible, send us a screenshot of the mouse pointer which could help us help you better.
  http://social.answers.Microsoft.com/forums/en-us/w7security/thread/c86de820-C620-401c-A804-9f6337cd3053

• to disable the properties button on the connections LAN, so the settings cannot be change

  Disable the properties button in the settings of local network in XP

  Hello...

  I have this problem, I want to disable the button of properties on connections to the LAN so that settings cannot be changed, I know I can just change the user limited, but I need account or an administrator account, the problem is that my users already know how to change the IP address to connect to the Internet.

  So I already do a little research in google and microsoft and he said: I need to go to the gpedit.msc and go to 'Access user, administrative templates, Network Configuration, and then select network connections' but my computer doesn't have the "Network connections" folder, so I try in regedit will "-> HKCU-> software-> network Microsoft Windows-> CurrentVersion-> policy->" and once again I have no options 'Network '. , so I create under the policies of the 'touch' 'Network'... and the 'DWORD' 'NoNetSetup' and restart the PC... but it just doesn't work.

  Any idea? ... I really really need this... BTW, all customers are WinXP.

  Thanks in advance!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• Title of movement cannot be changed

  Hello world

  I have problems trying to add a title of movement to my project.  When I drag and drop a title of movement in the titles and text group I get a popup message saying "cannot change this title of movement. "You could have split or applied Time Stretch. The title of the query is added to the timeline, but it cannot be changed. And Yes, I applied TimeStretch on one element in my project later in the timeline and on a separate track. The title of the motion that I am trying to add does not overlap in the timeline with the clip with TimeStretch applied to this subject.

  Is this behavior to predict something? Is this so that if somewhere in the draft, I used TimeStretch I can't use securities motion more?

  I'm on Mac OSX 10.11.6. My pre version is 14.1.

  Sorry, Marcin, I wasn't able to reproduce the problem on my iMac with OSX El Capitan. And you have certainly a lot more power than I do!

  I certainly don't see anything extraordinary in your project, based on your YouTube.

  What happens if you start a new project, with no media inside? Are you able to place and edit a title of movement there?

  In addition, the title you use a text font. And Macs can have problems with the fonts at times. (BTW, you have not all creative Cloud installed programs and you do not use cloud of fonts or font management, right?)

  Just as an experiment, try using the title of contemporary/general movement and see if that makes a difference.