Text field of point (always submits the page when you press enter)

Similar Questions

• Text field element submits the page when you press ENTER

  My page has
  -a 'text field' point
  -a 'Send' button (and a related branch, which works correctly).
  
  Management is working properly, when I hear some data for field text Item.
  and I press the submit button.
  
  I would like to the text field do the same action,
  When I press ENTER,
  After completing a few data for the text field.
  
  Currently, this does not work, and I get the following message:
  
  "ERR-1777: Page 121 provided no page at junction."
  Report this error to the administrator of your application.
  Restart the Application.
  
  I also tried the "(always present when the page Enter Presseds) text field" setting
  for the parameter "display as" Item.
  
  You can try my page at:
  http://Apex.Oracle.com/pls/OTN/f?p=9218:121
  
  Thank you very much
  Marios

  PS

  Make sure that the unconditional branch has a sequence number greater than all other branches - Apex will use the first part, that it can find which corresponds to the current situation. I tend to use 999 for the sequence numbers of the unconditional branches.

  Andy

• Turn off the text field (always submits page when you press enter)

  I have an area which allows you to enter search criteria. There are two fields and a button. The 1st field is a selection list that gives a list of columns in a database that can be searched on. The 2nd field is where the user enters the value to search for. The user can submit the search in 2 ways. They can press the button or press return when the cursor is in the 2nd item that is a text field (always submits page when you press enter). The results are then displayed in a region of report below.
  
  The problem I have, is that if the request is for > 10 seconds and the user gets impatient and hits the Enter key or the button search again the query is returned for a second time (or third or fourth according to the impatience of the user) causing the claim on the basis of data with a negative impact on the performance of the system.
  
  I know how to handle the search key. On a click event on I turn off the button so that the user cannot click on it again and resubmit the request.
  
  My question is - how can I turn off "always provides a page when you press enter" text item when the user presses enter? I tried an onclick event, but disabled the front element I could type in anything. Onblur event does not seem to do anything.
  
  Any ideas would be very appreciated.
  
  Andy

  Hello

  First of all, one thing to try: attributes of the Page, there is a section for the presentation in double - try setting this option on no.

  Otherwise, using the text field type, adds the following to the INPUT tag:

  onkeypress="return submitEnter(this,event)"
  

  which means, you can call your own function of javascript on the onkeypress event, the final line would be call submitEnter(). But you can set the value of a hidden page element:

  function doEnter(t, e)
  {
   if ($x('P1_SEARCH_RUNNING').value == 0)
   {
    $x('P1_SEARCH_RUNNING').value = 1;
    return submitEnter(t, e);
   }
   else
   {
    return false;
   }
  }
  

  Then, after changing your element to an element of normal text on the attributes of HTML form elements, add in:

  onkeypress="return doEnter(this,event)"
  

  Andy

• Text field (always submits page when you press enter)

  Hello
  
  I have two elements (username and password) and two buttons (Submit & cancel) when the user enters the correct DB table entry values and strike button SUBMIT with the < /b > < b > mouse it is able to go to the next internal page does not, up to here everything works absolutely perfect.
  
  But now, instead of clicking the button "SUBMIT" with the mouse, I want the user to use the functionality of the ENTER key on the keyboard and so I apply the two elements (username and password) as < b > text field (always submits page when you press enter) < /b > and < b > password (submits when you press enter) < /b > respectively.
  
  Also created a conditional branch and an unconditional branch (with the highest sequence number) by the research of the below thread: -.
  
  Re: Text field Element submits page when you press ENTER
  
  but still did not find any success, when I run the page with the correct details in the elements and press button nothing works the same page returns back to me with these two elements as empty?
  
  any help?
  
  
  thxs
  
  
  Kind regards
  Kumar

  Hello

  OK - two things...

  First of all, your branch to page 9 was conditional on the SUBMIT button

  Second, you had the condition that "request = Expression 1" where it should be "EXISTS.."

  I removed the button state and changed the condition type. Try it now

  Andy

• Validation of the page when you press the button

  Hello

  I have an element of the P59_MAIL_EVENT page that must be completed before pressing the button P59_CREATE_ATTACHMENTS from another region. The P59_MAIL_EVENT field is a Popup LOV.  The button sets a value on page 60 and then redirects to the page 60. It works fine when the P59_MAIL_EVENT field is filled in. I am trying to introduce an error control to prevent the user from go to page 60, if they did not choose something in P59_MAIL_EVENT.  I tried a simple Page element / Not Null of validation, but it did not work.

  I created a validation step with PL/SQL function that returns a Boolean. It is associated with P59_MAIL_EVENT and the when button is set to P59_CREATE_ATTACHMENTS button. Validation seems to have no effect. It brings me to page 60 when the LOV is empty and the key, which is what I'm trying to prevent.

  BEGIN

  IF: P59_MAIL_EVENT IS NULL THEN

  RETURN FALSE;

  ON THE OTHER

  RETURN TRUE;

  END IF;

  END;

  Thanks for looking at this.

  PhilMan2 wrote:

  I have an element of the P59_MAIL_EVENT page that must be completed before pressing the button P59_CREATE_ATTACHMENTS from another region. The P59_MAIL_EVENT field is a Popup LOV.  The button sets a value on page 60 and then redirects to the page 60. It works fine when the P59_MAIL_EVENT field is filled in. I am trying to introduce an error control to prevent the user from go to page 60, if they did not choose something in P59_MAIL_EVENT.  I tried a simple Page element / Not Null of validation, but it did not work.

  I created a validation step with PL/SQL function that returns a Boolean. It is associated with P59_MAIL_EVENT and the when button is set to P59_CREATE_ATTACHMENTS button. Validation seems to have no effect. It brings me to page 60 when the LOV is empty and the key, which is what I'm trying to prevent.

  BEGIN

  IF: P59_MAIL_EVENT IS NULL THEN

  RETURN FALSE;

  ON THE OTHER

  RETURN TRUE;

  END IF;

  END;

  The P59_CREATE_ATTACHMENTS button must submit page and branch to page 60, rather than redirection so that validation works. Change the button action to redirect to submit and create a branch to page 60 which is conditional on the button get clicked.

• Behavior of the button when you press ENTER key

  I want to run that by the forum to see if someone else can confirm.
  On a PC when a button has the focus, pressing the Enter key performs the button's onAction
  On a Mac hit the Enter key in the same conditions does nothing.
  
  The behavior is the same? Can others recreate the issue?
  
  I don't mind opening a ticket, I just want to see if it is a 'feature' first

  planned on a MAC user behavior

  I had a Mac yesterday.

  OS X 8 buttons are triggered when they are targeted and you press space on them - for the JavaFX applications and similar system.

  The focus by default system behavior is that only text boxes and lists getting focus - buttons not developed at all. Enter fire, by default the button regardless of whether it is focused or not - for example OK for a message dialog box or open a file dialog box. Enter sometimes run another action (such as an editable name - similar to a slow double click icon in Windows). ESC performs a function cancel - for example, to get rid of a pop-up window which may or not have a cancel into it button. Symbol alt + f to open a file menu do not appear to work at all for the applications of the system as Safari - I didn't try for JavaFX. To access a menu item, you can press ctrl + fn + F2, then navigate around a keyboard with the arrow keys or by typing the first letter of a menu item, then press SPACEBAR to activate the menu to get a drop down, then navigate with the keyboard even more and finally press the SPACEBAR to activate the desired menu item. Virtually every element of menu in Safari seems to have a combination of the accelerator of the command key + another key, so maybe it's the way things are to do in the land of Mac. None of the standard system applications seem to have all applied to the button symbol.

  If you go to System Preferences | Keyboard | Keyboard shortcuts there is an option that says access to the full keyboard: all controls. This button can also be activated at any time in the system using ctrl + fn + f7 combination. Once the option is enabled, you can tab to a button for the focus. JavaFX does not respect this setting, you can tab to buttons and others not on the list and the controls of textfield in a JavaFX application at any time, regardless of the value of the full keyboard access.

• Redirect users to the page when you take the system into maintenance mode.

  I want to redirect users to the page when you take the system into maintenance mode. We are on 12.1.3 application. Please provide me with the document who have these details

  Please see old threads that deal with the same subject.

  http://forums.Oracle.com/forums/search.jspa?threadID=&q=redirect+and+maintenance&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  http://forums.Oracle.com/forums/search.jspa?threadID=&q=maintenance+and+message&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  http://forums.Oracle.com/forums/search.jspa?threadID=&q=outage+and+maintenance&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  Do a search of the forum before posting similar questions.

  Thank you
  Hussein

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• How can I remove the slider on the page when you navigate?

  There's a slider that flashes in the HTML code in the pages, in the regions where it is not an input field, it is there for people with reading/accessibility problems, but I do not know how to disable? It causes major problems, for example a long page of Facebook, when you press an arrow key instead of the page, it will far is the slider?

  This has happened

  Each time Firefox opened

  is in the last weeks, don't know why

  Simply put, press F7?

• Cursor move to the field next when you press enter/return

  Is there a way to make the curson go to the next field when you click Enter / return as it does when you press the tab key? Currently he entered just the info in the current field and does not advance to the next field with I button back.

  You can with JavaScript, but you have to use in the event of strike or Format a field, which is (normally) not available for all types of fields (checkboxes, for example). For text fields, you can use the following in the Format event JavaScript code:

  Fragment of script format for the text field

  If (event.commitKey = 2) {}

  getField("Text2").setFocus ();

  }

  Replace "Text2" with the name of the field you want to access the next.

  The problem with this approach is the Format or the key event isn't available for the fields for which you have selected one of the pre-defined formats types (for example, number). There are ways to work around this limitation, if necessary, but things get a little complicated.

• Change the State of the button when you press another button

  Hi all

  I have a simple enough question, but just does not know how I can do this... I'm trying to switch between the two types of waveforms (sine and square) on a graph using buttons and a box structure.

  I currently have two buttons A and B. When I press A, it turns into real and displays the waveform 1. When I press B, B turns into real and displays the waveform 2. However, when B is true, I still have a permit as true (hurry)

  I can't figure out how to change the status of a return to false when you press B and vice versa.

  I am fairly new to Labview so if anyone can refer to a position where it is already the answer or point to the right direction, that would be appreciated

  Thank you

  Rather than clutter up the code with the event hidden cases (!), controls (!), value properties (!) and variable (!) local (as suggested above but not recommended at all!) In addition, it does not even work correctly!), all you need is a control radiobutton that allows also to "no selection". See attached (LabVIEW 2013). You could also add a third Boolean value for the sine wave and not dismiss "no selection" to make the code even more if auto-documentent.

  I made the transparent container radiobutton to match your existing style.

  

• drop off the list when you press the button

  Hello

  I use Apex4.2

  How can I view drop-down list when you press the button?

  
  

  environment or is it a solution to create the same interface as the apex dev

  Thank you

  Probably a lot of ways to do this, but I would just give the combo a hidden CSS class.

  Put this in your page inline CSS:

  . Hidden {}

  visibility: hidden;

  }

  and then on your issue in the HTML drop-down list box form element classes simply add this: hidden

  Then, create a dynamic action on click of a button using JavaScript to remove this class:

  $("#P10_YOUR_ITEM").removeClass ("hidden");

  See this example: http://apex.oracle.com/pls/apex/f?p=32581:2

  username: guest

  PW: app_1000

  Click the Show Drop Down List button and the menu drop-down element is displayed.

• How to set the default when button press "Enter".

  Hello

  I have a form, and he doesn't have that one button (send). When I press 'Enter', it can send the form and action. However, when I add another button (Normal button, not submit), it cannot run directly submit when I press "Enter".

  If you press 'Enter' and the form can submit automatically, it is more user-friendly than without this feature. Therefore, can I know the method to set the default button when users press "Enter"?

  At first I thought that can matter the order of the controls on the form.  When I run this code:

  
  

  
  
  
  

  While I am in the text box, if I press enter the form sends.  I tried originally with button and submit entries in the opposite direction.

  Note that the button enter will not submit the form if you are in a select command (aka dropdown) or a textarea component or if your home is not on a form element.  This is the default behavior.  If you want to replace, you write javascript.

• Error message "the website has encountered a problem and cannot display the page" when you try to install Windows XP SP3 update

  Original title: cannot use Windows Update to install Windows XP SP3

  I have done a complete reinstallation of Windows XP Pro from the original disc and managed to update to SP2.  However, when I tried to upgrade to SP3, I got an error that "the site has encountered a problem and cannot display the page.  I tried all the suggested fixes that I can find.

  During the last attempt, I discovered that several dll is missing.  Here's the msxml6.dll, wups2.dll, c:\windows\system32\wucltux.dll and c:\windows\system32\wuwebv.dll.  If they are critical, where can I find them, and how do I get support.

  In addition, mshtml.dll is available, but the DllRegisterServer could not find an entry point.  Is this critical?

  In any case, I still can I install Microsoft Update or download/install SP3.

  The computer is an IBM R50e laptop.

  Thanks for any help you can give.

  Try to run this tool to windows update. This will help to re-register the dll

  After its done. try again and do the update

  hope this helps

• Error "Could not load the page" when you click the backup and Restore Center

  Original title: Save reestore center problems

  OK so I need to restore my pc and when I click on the backup center and restoration he always says "Unable to load the page"... . How can I fix

  try to reinstall the backup files if you have a windows disk to use to reinstall or if your computer has windows factory preintalled windows, you could reinstall striehgt from your computer