Text is 'Leak' out of the right side of the FF browser window

Similar Questions

• Tablet draws a leak out of the screen directly to the left, whenever I have down Flash CC

  My TS-6608 Turcom / Oh P608N Tablet (people say that they are the same model and I tried both the original driver P608N installation and driver installation Turcom TS-6608 slightly modified for Windows 10 Turcomdrivers)

  draws a line from leaking out of the screen directly to the left whenever I have support with my pen pressure instead of my way of drawing. In Adobe Photoshop CC, it works perfectly fine. Why is this happening and how can I solve this problem?

  A line for every time I press. It is the only blue because that's the color of pen, I had chosen. This happens with the pencil tool and the Brush tool. I happen to run two monitors. Flash is open on the right monitor but I tried to swap around, drop down to a monitor, and it doesn't seem to change. I don't know if this is specific to my tablet or a problem with the program.

  

  It seems that there is a split second after the contact where it does not read my travels before putting in the left straight down.

  

  

  In Flash CS6, there seems to be a similar problem. When I press down, the first point shows but it stops to record the pressure down almost instantly even if I continue upward with the pen pressure. He holds the State pressed down but is not to follow the movement. With my mouse, I can then move around to draw the path, but it is not picking up the pen.

  

  Post edited by: Christopher Navarre

  Post edited by: Christopher Navarre 11:14 August 26, 2015

  In Flash CS3, it goes the same way as Flash CS5.5 where appears a point, it will not save the press which took place or release of the pen tip. If I move the mouse after pressing the pen, I can drag it around the same way. The problem seems to be that flash is not just reading presses pen continues but I don't know how to fix it. In other programs, it seems to work very well (Paint, Photoshop, etc.)

  Another thing I discovered is that if I have another program that is not selected in the active window flash but try to draw in flash using the Brush tool and then he reacts appropriately, but the second I drop the brush stroke and let Flash CC 2015 be the active window again it does not recognize my movements.

  I think it might be a simple driver issue.

  ANSWER:

  There seems to be a bug in the driver Turcom code. If you disconnect a monitor then you can normally draw in flash. What happens with two monitors, it's that the pen cursor position instantly repositioned correctly when you press down. Because I was drawing on my right monitor, it tended to be left (maybe because thought Flash that I worked on monitor 1 or something).

  I have an e-ticket with Turcom as a permanent solution, but for now, simply using a monitor works fine.

• Hyperlinks open in the same browser window

  Hey Gang!
  
  How do I create a hyperlink so that it opens in the same browser window and don't keep open a new window each time?
  
  See you soon!
  
  Gregory

  Hello

  It's kinda a 'hack', but you can use a Flash movie embedded to have more control over the process of any hyperlink. Basically, you simulate the hyperlink to a button in Flash, but instead of looking like a navigation button, you use the text of your hyperlink. This has the added benefit that you can make the text respond to mouse rollovers and clicks with a color change, something will links in PowerPoint.

  So, assuming you named the instance of your 'button' as myLink_btn, you add some actionscript to the main timeline:

  myLink_btn.onRelease = function () {}
  getURL (" http://my.url.com/index/index.htm","_self");
  }

  You compile your little Flash movie and just embed in your Powerpoint where you want. The student will never see the difference. We use this solution to provide the student a "Printable" presentation version - until we compile the PowerPoint with presenter, allows us to make a pdf Acrobat version and upload it to the Breeze server. On the first page of the presentation is a based on flash "link" to the pdf document, and the student assumes only Breeze is 'print' a copy of the presentation.

  More on getURL: you can have load a window named by replacing '_self' by the name of the window or a new window with "_blank". The getURL command also allows to send javascript commands in the browser that is running the Breeze presentation. If you need to use relative links (if you go to the construction of a stand-alone application on a CD, for example, and you want to link to the pdf documents in a subdirectory), this is the best way to do it, as the presenter did a bad job of conversion of links in PowerPoint. And, as I said, you can have the links "light up" when the mouse user above them, something that connects in PowerPoint will not be.

  But... to say that you have 30 pdf documents on your Breeze server, and you want to make a navigation to a simple page for them. If you are not concerned about LMS data capture, it's MUCH easier to simply create the interface all in a single Flash document and send the student to one - just put all the pdf documents in a folder on the server of the game is to "allow public consultation", and they don't don't even need to log the server to read. :) It is an excellent solution if your company is like mine, where some people have created their own little fiefdom controlling the real web server, and you use Breeze to accommodate all kinds of resources that would normally be available on your intranet. If you say that you want to host a resource on the 'web', you will need to go through them (and what a pleasure a process i.e. - they insist on building everything themselves to justify their budget)... but if its on 'training Breeze sever', they don't care.

  Laughing out loud.

  v/r,
  ~ Marc B

• Cannot connect two work spaces in the same browser window

  Hello
  Happy holidays to all. I have problem to identify two workspaces (associated with two diagrams) in a browser with two tabs in the browser. The situation as the following:
  
  -Using Internet Explorer 7.0 or Firefox
  -Login in A work space, associated with the AA scheme. (connect successfully)
  -Then, click New tab in the same browser window, log in the workspace B, associated with the schema BB. (connect successfully)
  - The tab of connection of space one was closed (kicks) automatically.
  
  If I open two separate browsers, I can connect a work space in the window of a browser and connect another workspace in a separate window, not tab.
  
  Why? Is somewhere, I missed setting or configuration for APEX? All advice is greatly appreciated.
  
  Candice

  You're right, you can't do that.

  Try using Firefox chrome and one for the other.

  Tyler Muth
  http://tylermuth.WordPress.com
  [Oracle security application: development of secure database and Middleware environments | http://sn.im/aos.book]

• The firefox browser window is not visible, only the toolbar. Have deleted and reloaded but no change

  When I open firefox, only the toolbar is visible. The main browser window is not available. I tried to open a new window in the menu bar, but no browser window appears.
  I deleted the program from my mac and reloaded a new version on the mozilla site, but still no navigation window.
  I'm not able to access the reset button, it takes a window is visible.

  I use a macbook pro with the latest osx responsible.

  You can try to do some maintenance.

  Repair disk permissions:

  • http://thexlab.com/FAQs/repairprocess.html

  Delete the plist of Firefox (org.mozilla.firefox.plist).

  • http://www.MacFixIt.com/article.php?story=20060606082246983 how the .plist files become corrupted and results troubleshooting

  Go to "~/Library/Preferences" and delete the plist for Firefox (org.mozilla.firefox.plist)

  You can check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• How to animate canvas Link to open in the same browser window?

  I have created a Web film animate CC and want to click on it to post a link to a URL.  However, I want the URL linked to open in the same browser window - not a new browser window.  I used the code snippet of the canvas in order to link the URL, but it seems to work for opening in a new browser window.  How can I change the code so that the link opens in the same browser window?

  Please notify.

  Thank you.

  _Self to use instead of _blank as target.

• Open in the same browser window

  I made a flash element for my dreamweaver website. I have an invisible button on top so when you click on it, it opens a new page. I'm trying to make sure when you open it, it opens in the same browser window. I tried to make the target itself and it did not work. Any ideas?

  _self must be in quotes

• The source browser window docking station

  I noticed that the windows of variables and watch can go side by side.  I would also add source beside them browsing windows.

  Someone knows how to do this?  I know that I can release, but then he loses.

  (I used Visual Studio 2006 for awhile and as the list of function names in the upper part.  I got the list of function names by right-clicking on the project name and selecting search, that's nice, but this bar when it is anchored takes a lot of space on the screen.

  Hi Scott,.

  Unfortunately, there is currently no way to position the navigation source code window within the host region of the variables and watch windows. Navigation window source code has its own host region intended to the browse several tabs that you can have within this window.

  You mentioned that when you release the browser window, it is "lost." Does that mean he's going behind the window of your main work space (what would happen if you have your workspace window maximized) or that you really mean 'lost' as in 'he is really gone, I have no idea where he went"- which shouldn't happen, so let me know if this is the case. However, if it comes to pass behind the window of the workspace, you can alternate the two windows back by pressing several times.

  If you use to switch between the two thw windows is too heavy, then your only option at this point (unless you have a second monitor) is to maximize the workspace window, and then resize the windows to make room for the browser window next to the window of the workspace, or above or below.

  Luis

• Submit the form with the answer in the new browser window

  Is it possible to set up a "submit" button so that it displays the answer in a separate browser window?  With an HTML form, I can do this using the target = "_blank", but not aware of such an option on a LiveCycle send button.

  If you can't do it, maybe there is another way to do what I need.  Users fill in the PDF data entry form and send the data to a servlet that returns an another (different) PDF.  My user can analyze this PDF file, you see a problem and to return to the data entry form to change what it is entered before the regeneration of the output.  However, at this time there my PDF of original data entry has disappeared.  I'm not using LiveCycle on the server.  Any ideas?

  Thanks a lot for your help on this Paul.  I decided to go with the approach of hostContainer despite my reservations.  Here is a simplified version of my servlet.  This version of simply parrots back the XML in a window separate.  I hope this helps someone.

  package ca.jlangdon.sampleservlets;

  import java. IO;
  to import javax.servlet.ServletException;
  Import javax.servlet.http.HttpServlet;
  to import javax.servlet.http.HttpServletRequest;
  to import javax.servlet.http.HttpServletResponse;

  SerializableAttribute public class AnnuityFF extends HttpServlet {}

  static final long serialVersionUID = 1 L;

  ' public void doGet (HttpServletRequest request, HttpServletResponse response) survey ServletException, java.io.IOException {}
  response.setContentType("text/html");
  java.io.PrintWriter out = response.getWriter ();
  out.println(")");
  out.println(")");
  out.println(" ");
  out.println(")");
  out.println(")");
  out.println(")

  ");
  out.println(")
  ");
  out.println(")
  ");
  out.println ("");
  out.println(")
  ");
  }

  ' public void doPost (HttpServletRequest request, HttpServletResponse response) survey ServletException, java.io.IOException {}
  try {}
  String strExtract = request.getParameter ("myTextArea");
  response.setContentType("text/xml");
  PrintWriter out = response.getWriter ();
  out.println (strExtract);
  }
  catch (Exception e) {}
  }
  }
  }

  My form is called FulfillmentGenerator, and it is stored at the root of the web application.  On this, there is a button with this javascript on the click event:

  var oDoc = event.target;

  var strData = xfa.datasets.data.resolveNode("AnnuityFulfillmentPackage").saveXML ("pretty");

  var strings = [strData];

  try {}

  oDoc.hostContainer.postMessage (strings);

  }

  {} catch (ex)

  xfa.host.messageBox ("error when sending messages to the container:" + ex);

  }

• Behavior of the open browser windows

  Using the behavior of the browser window open I the following problem:

  A parent-page with inch-images (of articles) I open a PHP window with a larger image over the text of the info:

  onclick = "MM_openBrWindow (' display.php article?)" Article_ID = KNO024 ',' default ',' width = 550, height is 570')"

  The window opens fine, no problem.

  However in the process of opening a second article:

  onclick = "MM_openBrWindow (' display.php article?)" Article_ID = KNO020 ',' default ',' width = 550, height is 570')"

  stays of window is now open behind the parent page. I use the same window name ("default"), because I want to avoid multiple browser windows open. So, Yes, there is an additional browser window open, but unfortunately it is now behind the parent page

  Y at - it an option to get this window always ahead?

  You could do this - in the page that opens with the larger image, modify the body of this - tag

  on this subject.

  This will cause this window subordinated closing anytime, he is sent behind another window to foreground.

• Link to the report that returns the user to the original browser window

  Greetings:
  
  I have a link in the browser that opens a new browser window B and run a report. In the present report in browser B, I have a column whose values have links. When the user clicks on the link, I want to redirect the browser to run a query that displays detailed information about their selection. Browser B would remain open.
  
  In the link in browser B, how can I redirect the browser to run this query?
  
  Any help would be appreciated.
  
  Thank you
  Stan

  P1_XYA is a text element on the page that is in the browser.

  the report of the browser request is

  Select col1, col2, col3 from myTable
  where col1 =: P1_XYA and: P1_XYA is not null

  Kind regards
  shijesh

• The missing browser window! Happened when I downloaded "partially" bar to get the coupon. cancelled before the end. Deleted in computer... still no browser

  Took the wise decision looking for a coupon download a bar. Cancelled before it finished... entered the computer and delete. Everything what it on my page except the window/browser bar that my page is in my opinion an AOL Firefox page. When I turn on the computer normally, I have a big search engine in the middle that I don't know. I go to the browser and start www.aol (never having to finish... drop a login... Click on) & Huffington post comes with available electronic mail. My News & then go to the email. I like that! Now NO browser window! To get to email due to history and find the past & put updated! Clicked on the browser... put in custody and error control. How can I fix it? Not tech y please more easy fix?
  Windows 7... apparently Firefox auto took me to 25.0.1.
  Normally only have good things to say... it was my fact... hope you all can help me break easily!

  COR - el... You are a genius! Thank heaven, a simple solution for me. I pushed the key F11 key before dinner... nothing. After dinner... refreshed & ready to attack again. I went to support via clicking on your email down... then clicked on site that you highlighted to see if I missed something. No, exactly as you explained. BUT I watched questions alongside your message of support to see if they shed any light. The last issue said a woman how to make something disappear... then told him to go see and bring things back. I was not sure but thought if I could get the F11 to work click on view and see if all there help.
  I have had no back arrows so had to move from one page of AOl email to support and again through windows I could switch and make it appear at the top. I pressed F11 hard and voila! The menu bar is back... so I went to see. And you know the answer... clicked on toolbars and the navigation toolbar was not selected! Clicked and I am in service again!
  Thank you for your support of the directive. Grateful, that I have no problems as all the others who seem to have more difficult problems. I learned a lot thanks to this... especially since I have no knowledge of this amazing machine base. How I managed all these years with so little skill is a marvel. Thank you once again! Andydandy

• Different applications of the ADF will not work in the same browser window

  Hello
  When I recorded with an application and then open another browser window and I just record in the second request. Back to first and take any action and it shows error, as if my session has expired.
  I put a ViewHandler method sobreescibe restoreView (FacesContext FacesContext, String viewId) as follows:
  
  UIViewRoot root = null;
  root = parent.restoreView (FacesContext, viewId);
  If (root == null) {}
  root = createView (FacesContext, viewId);
  }
  Returns the root;
  
  But this solution is temporary, because I need to create a view of all the data you had in the PageFlow, for example, the results of a search.
  
  Anyone know if this is a bug in the adf, or have I missed some settings?
  
  The versions that I work with are:
  
  JDeveloper: 11.1.1.3.0
  WebLogic Server: 10.3.3.0
  ADF:
  Oracle-Version: 11.1.1.3.37.56.60
  Oracle-Label: JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
  Oracle-Builder: iibuild on asbld15 Linux

  Hello

  I had a similar problem. I solved this way:
  -create the weblogic.xml (deployment descriptor Weblogic--> located in JDeveloper when you tap new "Général Deployment Descriptor") for your ViewController project.
  -set the cookie path to a unique name (for both apps)

  example:

  
  
    
      /myapp
    
  
  

  and the demand for /myOtherApp ;)

  Martin

• Open a session in a pop up, rather than in the main browser window

  Hello

  I used to be able to open all my meetings Connect in a pop-up window (in fact it opens automatically), I was on XP.

  I just switch to Win7 (not sure if this is relevant) and now whenever I open a session it will open in the browser window (in Firefox or IE).

  The pop-up has been much more useful for me, is anyone know if/how I can force my Connect meetings to open that way?

  Thank you!

  You must install the Add-in connection. You can find it here: http://www.connectusers.com/downloads/

• Help with a link to a web page in the same browser window

  I've just updated my Flash MX to CS5.5 and am completely perplexed at what seems to be the most basic of functions.

  I have a small Flash animation that is embedded on a site. At the end of the film, there is a call to action to click on another page on this site. However, it seems that the only action in the Code Snippets Panel is for an action that opens a new browser window. I miss the Panel basic actions! Am I missing something here? How do I have to? I tried to change '_self' instead of '_blank' code but it does not work

  Here is the code:

  button_5.addEventListener (MouseEvent.Click, fl_ClickToGoToWebPage_9);

  function fl_ClickToGoToWebPage_9(event:MouseEvent):void

  {

  navigateToURL (new URLRequest ("purchase.html"), "_blank");

  }

  Change it to test on a server and _self.