Text of autocompletefield to access

Similar Questions

• Text form field properties: access with Javascript?

  Hello

  I wonder if it is possible to access all of the properties of text form field with Javascript.

  The basic game is available under the domain object, but I'm looking for the other stuff that does not specifically exist for the fields of rich text, such as the properties of next paragraph:

  Dashes (left and right, withdrawal, first to the first line indent), the vertical alignment (top, bottom, middle), space above and below and attack (line spacing).

  All this is available if you place your cursor in a rich text field and press Ctrl-E to open text form field properties, then click on "More".

  So I wonder if it is also accessible via JS, because I can't find anything in the documentation on the subject.

  Thanks much for any help!

  Ariel

  Some properties of rich text are available, but not those you mentioned.

  I'm afraid.

  Study of the Span object to find out which ones are.

• Cannot disable "search text when you type".

  Yesterday I rekindled my settings of Firefox failing to solve a problem of gel. Since then, every time I start typing in a framework, I start to get boring text suggestions. In accessibility options, I disabled 'Find the text when you type' but it makes no difference. I studied the problem and tried on a solution - opening and closing of the downloads dialog box - that has not worked.

  It has worked before. Now, why not?

  Thank you! Turn off, that did the trick. There might be a few sites where I would like to AS form filling, but I can't live without him to avoid the aggravation on a particular site.

• access to table cells

  Hello

  Could someone please help me understand how to access the cells in a table (to do)?  I have a report with a table full of a channel.  In a column, it shows a list of names (which come from a channel).  I have another string with a list of colors and I want to associate each name in the table with a color of the second round. I tried unsuccessfully to access even a cell using D2TabRow and D2TabCol and the content...

  Any help is appreciated

  Thank you

  Hi Muskeg,

  Edna has sent two times it shows the only way to change the font of the text in individual table cells properties.  You create, save and call a UserCommand, so is not simple.  The main problem you use is that the table in the REPORT object does not generally contain cells.  If you happen to have chosen a column type in the 'list of text', then you can access the contents of individual table cells, but otherwise, your only options are to get and set the values outside the table that the table is referencing - be they channel values or the values of variables or expressions.

  The easiest option is to get/set of string values and assign each column of the table or row to display the channel values.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• MS Access AS condition returns zero records

  When you use the 'WHERE' clause to the status of 'LIKE' with database connectivity kit, I have zero records returned by my Access database. The exact same query text running in MS Access returns the correct number of records.

  "I use the" Open DB: ', DB run the query "and then"extract the data recordset"live

  Replacement of SIMILAR with a simple "=" will return the corresponding as expected a record.

  Is there a known issue with the condition of 'LIKE '?

  Bill

  LabVIEW 2011 SP1

  While the former, this can enlighten us:

  http://forums.devarticles.com/Microsoft-Access-development-49/like-operator-not-working-with-Ms-ACCE...

  Your SIMILAR statement may not be properly trained.  Insida access, the connection is different from the one through ODBC, and similar generic characters are different as well.

• "gmail" send text: information retrieve deleted recently?

  When you compose the e-mail message to 'gmail' (running Internet Explorer 8 and Windows XP), how can I recover recently deleted text (for example, cancel, access plates to clip, other?) Reply with detailed suggestions. Thank you.

  Hello

  Unfortunately, you cannot recover the deleted text of Gmail; However I suggest you post your query in the following link.

  Gmail support: http://mail.google.com/support/

• Access to the path is denied

  Hey, I tried to open this file, but I got this error...

  The exception text *.
  System.UnauthorizedAccessException: Access to the path 'C:\String.wz' is denied.
  at System.IO.__Error.WinIOError (Int32 errorCode, String maybeFullPath)
  at System.IO.FileStream.Init (String path, mode FileMode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, bufferSize Int32, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
  at System.IO.FileStream... ctor (String path, FileMode mode, FileAccess access, FileShare share)
  to System.IO.File.Open (String path, FileMode mode)
  at WzLib.WzFile.ParseMainWzDirectory)
  at WzLib.WzFile.ParseWzFile)
  at Decrypt.MainForm.load_file (String path)
  at Decrypt.MainForm.button1_Click (Object sender, EventArgs e)
  at System.Windows.Forms.ToolStripItem.RaiseEvent (Object key, EventArgs e)
  to System.Windows.Forms.ToolStripMenuItem.OnClick (ByVal e As EventArgs)
  to System.Windows.Forms.ToolStripItem.HandleClick (ByVal e As EventArgs)
  at System.Windows.Forms.ToolStripItem.HandleMouseUp (MouseEventArgs e)
  at System.Windows.Forms.ToolStripItem.FireEventInteractive (EventArgs e, ToolStripItemEventType met)
  at System.Windows.Forms.ToolStripItem.FireEvent (EventArgs e, ToolStripItemEventType met)
  at System.Windows.Forms.ToolStrip.OnMouseUp (MouseEventArgs mea)
  at System.Windows.Forms.ToolStripDropDown.OnMouseUp (MouseEventArgs mea)
  at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.ScrollableControl.WndProc (Message & m)
  at System.Windows.Forms.ToolStrip.WndProc (Message & m)
  at System.Windows.Forms.ToolStripDropDown.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5485 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
  ----------------------------------------
  WzRepacker
  Assembly version: 2.1.0.0
  Win32 version: 2.1.0.0
  CodeBase: file:///C:/Users/Alvin/Desktop/modified%20harepacker%20 (final) WzRepacker.exe
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5491 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5485 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5491 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  WzLib
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  CodeBase: file:///C:/Users/Alvin/Desktop/modified%20harepacker%20 (final) WzLib.DLL
  ----------------------------------------
  Microsoft.DirectX.AudioVideoPlayback
  Assembly version: 1.0.2902.0
  Win32 version: 5.04.00.2904
  Code: file:///C:/Windows/assembly/GAC/Microsoft.DirectX.AudioVideoPlayback/1.0.2902.0__31bf3856ad364e35/Microsoft.DirectX.AudioVideoPlayback.dll
  ----------------------------------------
  System.Configuration
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5483 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  System.Xml
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5485 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Now I use the other program to open the file, it shows this error

  Error initializing the String.wz (Non-negative number required. Parameter name: County). Check that the directory is valid and the file is not in use.

  This is an application-specific error. It has nothing to do with Windows. You should check with the supplier of this 'another program '.

• MDS Simulator "do not have access to.

  I am trying to build a simple Midlet based soap client. I'm using kSOAP2

  I use:

  Blackberry Simulator 9000 - 4.6.0.150

  JDE 4.7.0.41

  4.1.2 MDS Simulator

  Web service based on kSOAP2 (best docs and depolyment simpler)

  I am able to browse the web inside the Simulator, but when I try to connect to my web service deployed locally (http://127.0.0.1: 8061/MobileSOAP/service), I can't seem to connect. The MDS Simulator complains:

  <2009-09-21 10:38:48.526 EDT>:[264]:::
  

  I'm guessing this has something to do with the site, signatures and other things security, as

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryEnterpriseSolution&message...

  but this link guess I have a BlackBerry Enterprise serve, and I hope that I don't have to deploy just to get a soap client working.

  How can I get the MDS Simulator to allow localhost requests?

  I'll have more problems when I deploy to interact with our web production servers?

  Thank you

  PS

  In case you think that my service is down, I have an Oracle installation on my machine that has its own web service (http://127.0.0.1: 8080/apex /), and I use firefox to load the page and perform administrative tasks. But I can't use the BB Simulator even browser load the page. Yet once again, the MDS complains:

  <2009-09-21 11:13:30.510 EDT>:[371]:::
  

  In case you worry, my demand was showing

  org.kxml.io.ParseException: unexpected: ParseEvent type=128 text="Not authorized to access 127.0.0.1:8061' @-1:-1
  

  I spent an hour in the examination of the documents and forming my question only to find out the address IP is false, ONCE I confirmed the issue!

  I could have used my public IP not localhost or 127.0.0.1

• Separate the internet access and VPN traffic

  Hello everyone!

  I have a VPN Client that connect with the office, the vpn works great. Now all traffic, including internet´s access goes through the tunnel. I would separate it, I know I can use a split tunnel, but does not work for me.

  Here is the config:

  internal remote group strategy
  Group remote attributes policy
  value of 192.168.0.11 WINS server
  Server DNS 192.168.0.13 value
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy excludespecified
  value of Split-tunnel-network-list Accesso_Restringido
  XXXX.xxx value by default-field

  Accesso_Restringido list extended access denied object-group ip VPN remote everything

  Any idea?

  Concerning

  KC

  You should ignore the NAT for traffic between the vpn to the DMZ network client

  1 remove the following text

  No inside_nat0_outbound access ip 192.168.0.0 scope list allow 255.255.0.0 10.10.1.0 255.255.255.0

  2. Add the following

  permit dmz_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 10.10.1.0 255.255.255.0

  NAT (DMZ) 0-list of access dmz_nat0_outbound

• How to 'split' text mode 'HTML5 canvas "?

  'Split' option is greyed out in HTML5 canvas. Is it bug or feature? How break apart text or convert the text to a path access/plan?

  Thank you

  Hi Marek,

  In addition to the Typekit web fonts, Google fonts are now supported in HTML5 canvas documents in the last update of CC animate (15.2.1) comes out.

  See here: new feature summary (June and August 2016)

  By using the Google fonts to animate CC

  Update your copy of CC animate through the creative application of cloud and try it!

  Thank you!

  Mohan

• How to extract text from a GIF Image?

  I have 47 lines typed text parsed as (.gif) image file.  I want 47 lines of text from the image, so it can be edited in MS Word. I've attached an example image file. I have several of the same format image files. How to extract text from an image using Photoshop CS2. In Photoshop CS2 image text layer is locked. During extraction using OCR it gives words and symbols, should be a lot of words spruced up. Kindly help to extract text using Photoshop CS2. Thank you.

  

  This has nothing to do with PS. Others are simply limits to all OCR process and you will have to live with it, especially since your image is extremely low resolution and the font used is not particularly suitable for OCR, either - too many thin areas will be ignored or interpreted as gray. Whatever it is, it took me 2 minutes to write this response at this very moment a bad typist like me might have re typed your text from scratch, just access it so...

  Mylenium

• How to stop IE display text alt as a tool tip when the mouse on the image.

  I have random images in echo [B] [/ b] by a PHP script on a page.

  [CODE] < img src = "<?" PHP echo $randomImage;? ">" alt = "This is the alternative text" / > [/ CODE]

  The problem is whenever you highlight on the image, IE spits out the text.
  I understand the alt text are intended for accessibility.

  So, how can I stop this IE behavior with compromises accessibility?

  Thank you all.

  Patrick

  IE8 never shows the attribute alt as a ToolTip.  They finally got this right in the browser.

  It would be good if you checked correctly answered thread, so people who don't have no need to keep clicking on it.  Thank you.

  -- 
  
  E. Michael Brandt
  
  www.divahtml.comwww.divahtml.com/products/scripts_dreamweaver_extensions.phpStandards-compliant scripts and Dreamweaver Extensions
  
  www.valleywebdesigns.com/vwd_Vdw.aspJustSo PictureWindowJustSo PhotoAlbum, et alia
  
  --
  

• How to create editable text on the path of the perl script

  Hello

  I'm lost. I have exhausted all possible ways but nothing works. My problem is easy to describe: I have a Perl script that creates a design, and the design should be editable in artificial intelligence. Drawing text on a path (curved text - drawing is an access plan).

  Now I don't like how I do - I want to just make it work. I can create all types of file with Perl if someone tells me what it should look like.

  I tried to create a SVG file with text on a path. It works and the resulting file can be edited in an editor like Inkscape SVG, including the full text on the editability of the path. But if I import this file into Illustrator (AI 10 and CS3), the individual letters still sitting on the road, but all of them are facing up (instead of regardless of the direction of the path is). If it does not work. Then I said ok, because the SVG looks fine in Inkscape, let me just export EPS form Inkscape and use in artificial intelligence. Now the file looks good in artificial intelligence, but the text has been converted by trace himself, with each letter on its own session - not editable. Next thing I've tried generates directly from Perl, using a PathText function that I found in the Cookbook of Adobe PostScript EPS. Once again the EPS resulting looks good in artificial intelligence and the text is correct, no curves - but still a time, all the letters is its own, so if you go there with the text and tool removes a letter, it leaves a blank spot, and if you insert a letter, it replaces the next letter. Duh!

  So I tried the opposite: make a text on a path in artificial intelligence and save, with the plan to look at the file and generate what is there with my Perl script later. Unfortunately, the file saved by HAVE contains a chunk of binary garbage (be they saved as editable SVG or as file) that does not lend itself to facilitate the interpretation of yours really.

  I'm really not much. And I'm willing and able to create any type of file. Everything I need is something that I read, and which translates a text on a path that is editable in artificial intelligence.

  Does anyone have a pointer to a documentation, or existing in any programming language, source code that could help me in creating such a file?

  Thank you

  DZ

  I think you should look in the AI7FileFormat.pdf file (available many places online), specifically the pages 85 to 87 and 105 page, who speak of the operators of text, including text on a path.

  If we exclude the 4000 lines or so of boilerplate prolog and procsets, the code base for a text on a path is as simple as that:

  2 to
  1 0 0 1 - 4013.5 4715,5 0.4 Tp
  0 m 0
  0 200 400 200 400 0 c
  TP N
  0 tr
  TF/_Myriad-Roman 12
  (This text is in the path of access. \r) TX
  TO

  Record cleaning (first use cleaning brush/Style/Swatch action) file eps, version 6, and you shouldn't get any binary stuff.

• set the focus to the text fields named incrementally

  I created the many (hundreds) of the fields of text through actionscript. I gradually name them and place them on the stage and then subsequently access to set focus.
  I use create a textfield object:
  var txtbox:TextField = new TextField();
  
  and then use a name incremented to the text field to identify it later:
  
  var txtname:String = txtn + txtcnt; txtcnt is a number incremented variable. txtn is a string variable.
  txtBox. Name = txtname;
  
  I add an eventlistener on stage. The event listener works very well and has a companion function.
  I can identify the text field I want access once the move is running through his name.
  Then I use this .name property to set the focus:
  
  internship. Focus = "txt88";
  
  Again, "txt88" is the .name of the text field.
  
  What I am doing wrong?
  
  ypeError: Error #1034: Type coercion failed: cannot convert "txt88" in flash.display.InteractiveObject.
  to MethodInfo-(200)
  
  
  Also, I tried to use the variable incremented during this step, but get a msg of error affecting the variable this way textfield name.
  var txtname:TextField = new TextField();
  

  Awesome!
  Who did it! I appreciate your help. It is a major obstacle and I went through the help files and books without success. (If it works fine in the AS2 version!)
  Anyway, you are a lifesaver. Thank you.

• masking dynamic text

  Newbie here, so try to not be offended if it is really stupid...
  
  Is there anyway to use a mask on a dynamic text field. When I add a layer mask over my dynamic text in author mode field, it seems to work, but as soon as I test, dynamic text seems to disappear. If I do the static dynamic text field, masking works very well. But I don't seem to be able to give an instance name of static text and therefore can not access in actionscript. Am I missing something here?
  
  In a more general way, I read in a book called Flash 8 Cookbook that the TextArea component is quite heavy and you may sometimes be better to develop your own scrolling text field. Does anyone have ideas on this?

  > Is anyway to use a mask on a dynamic text field. When I add a
  > layer mask over my dynamic text in author mode field, it seems to work, but as
  > soon, because I test, dynamic text seems to disappear. If I do the dynamics
  > static field, the masking text works fine. But I don't seem to be able to
  > give a name of occurrence of static text and therefore cannot access
  > actionscript. Am I missing something here?

  Yes, you miss something, police States :)
  A Flash animation is impossible or mask the text that isn't contours. Static text has by
  by default. Dynamic text needs the contours to include, through the field text property
  Panel or action script.
  Static text, once entered, is on stage. Flash can bring together all the characters and include
  its outline when exported. Although this is not the case with dynamic text. There is none
  text for flash gives a glimpse of so you must include vector fonts
  manually.
  Select your dynamic text field, press CTRL F3 to open the properties panel.
  Once you have it, search for EMBED button on the right side.
  Hold down the CTRL key and select, Upper, Lower, digital, punctuation...
  or any that you need. If you have something like name from a dynamic source
  You can include characters or just small beach. Include all except
  you need it. It increases the size of the file, not much, but with the complex of all the little projects
  bytes and there contribute to overall large file.

  > In a more general way, I read in a book called Flash 8 Cookbook that the
  > Component TextArea is quite heavy and you may sometimes be
  > better develop your own scrolling text field. Does anyone have thoughts
  > on this?

  That is right. Most of the components are what we call Bloatware.
  Can't blame Macromedia tho :) Imagine a component that is intended for general usage requirements
  and the variety of options, we might want to have with her. Engineers usually more code
  make an adjustment, which makes klunky and large at the same time. To make your own, it is
  really much easier has many advantages, customization to the bottom line to have total control
  above him.

  --
  Best regards

  Urami

  --

  !!!!!!! Merry Christmas!
  &
  Happy new year

  
  If you want to send me a message - DO NOT LAUGH at MY ADDRESS