Access to the path is denied

Similar Questions

• FPGA Xilinx compilation failed. Access to the path 'C:\NIFPGA\corecache\activity.log' is denied.

  I just has my cRIO.  I installed all necessary software and drivers and have written a VI mode FPGA.  However, when I try to compile the code, I get the error of follow-up message (see attachment).  I contacted the support NEITHER and they have been unable to solve this problem at the moment.

  The engineer NOR gave me the following advice:

  ' 1. start the registry editor by selecting Start ' Run and then entering the window run regedit.
  2. press the Enter key to open the editor.
  3. find the following registry key in the path below:
  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\National Instruments\LabVIEW\11.0\AddOns\FPGA\CompilerPath_Xilinx12_4
  * the Wow6432Node is not correct in all cases. on my PC, you go to HKEY_LOCAL_MACHINE\SOFTWARE. National Instruments\LabVIEW\11.0\AddOns\FPGA\CompilerPath_Xilinx12_4
  4. on the data tab, you should see the path associated with your CompilerPath_Xilinx12_4. Please confirm that it is linked to the C:\NIFGPA\programs\Xilinx12_4
  If you Xilinx 11.5 installed, make sure it is also bound to the correct path.
  5. If you have previous versions of LabVIEW installed, you will need to go to these versions as well. For example if you have LabVIEW 2010 is installed, please, go to 10.0\AddOns\FPGA
  Make sure that the CompilerPath_Xilinx12_4 or the CompilerPath_Xilinx11_5 or the CompilerPath_Xilinx10_1 are all properly placed under the drive C as seen above in step 4.
  (6) make sure that the "Working Directory" under LabVIEW 11.0 has the right path of C:\NIFPGA\
  (7) after that, close the registry editor and navigate to where is the worker to compile the FPGA. By default, it should be here: C:\Program Files (x 86) \National Instruments\FPGA\CompileWorker
  (8) here open the document "WorkerRootDirectory.txt" and change the path. Make sure that it is pointing to the C drive.
  (9) save and close the file. Restart your computer.

  It was already correct and still impossible to compile.

  Usually, a "access to the path... denied." error comes from the permissions of the user.

  What operating system do you use?

  You use this tool from an administrator account?

  Is there a security policy on your computer which determines the permissions and user rights?

  Is it possible to run LabVIEW as an administrator?  (e.g. under Windows 7, you right-click on LabVIEW.exe and choose 'Run as administrator'.)

  Best regards

• System.UnauthorizedAccessException: Access to the path '[Namespace.InstallState]' is denied.

  Hello

  We have a Windows Service project that was developed using Visual Studio 2008.  After you build the project successfully, we used the installutil.exe to install the program as a NT service on a Windows Server 2003 R2 server. (Referring to the steps in the article: creating a Windows Service Application). It works very well.

  Now, we are upgrading to a Windows Server 2008 R2 Datacenter server. When I followed the same step to set up the NT service on the new server I got a message: System.UnauthorizedAccessException: access to the path 'C:\inetpub\wwwroot\_uat\WindowsService\bin\Debug\WindowsService.InstallState' is denied. I checked the permissions on the _uat folder are identical to what is on the old server. I have came across this article (kb946503) that describes the similar problem, but on the remote computer to install (I am running the installutil.exe locally on the new server). Anyone know how to fix this?

  Victor Zhang

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Access to the path 'C:\Users\User-2\AppData\Roaming\Hewlett-Packard\HPAdvisor\HPAdvisor.MainFrame.Controls.DockPopup.Main.xml' is denied.

  Someone at - it an idea of this error message: [access to the path 'C:\Users\User-2\AppData\Roaming\Hewlett-Packard\HPAdvisor\HPAdvisor.MainFrame.Controls.DockPopup.Main.xml' is denied.]

  This happens only if I "User Account Control" is enabled in the administrator account.

  Hi GA,.

  Is the default Administrator account or an account that you created?

  Method 1:

  You can try creating another account with admin rights and see if that solves it.

  Create a user account

  If the problem does not occur, then check out the following link and follow the steps to repair the corrupted user profile:

  Difficulty of a corrupted user profile

  Method 2:

  Also, if this problem just started, then try to perform a system restore, and check.

  You can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

• Access to the path 'C:\ProgramData\ATI\ACE\Profiles.xml' is denied.

  Original title: Hi I have a problem of AceEventlog of program data, access is denied for the CCC, I guess anyway I'll post the log.

  I've updated the drivers recently CCC 10.8 and now I have a bunch of papers in the journal of AceEvent, any help would be great. Log name: ACEEventLog
  Source: ACEEventLogSource
  Date: 2010-09-12 12:45:46
  Event ID: 0
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: SavannahMick-PC
  Description:
  0000000241: 2010-09-12 12:45:46:281 Exception: access to the path 'C:\ProgramData\ATI\ACE\Profiles.xml' is denied.
  Called by exception: ATI. ACE. APM. ProcessID:03780 threadID :) server. XmlDocumentSaver::SaverWorker domain name::(APM.) assemblyName (CCC.exe) Server, Version = 2.0.3867.36565, Culture = neutral, PublicKeyToken = 90ba9c70f846762e)
  ************************************************************************************************************************

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      0
      4
      0
      0 x 80000000000000
     
      10312
      ACEEventLog
      SavannahMick-PC
     
   
   
      0000000241: 2010-09-12 12:45:46:281 Exception < save the Xml Document >: access to the path 'C:\ProgramData\ATI\ACE\Profiles.xml' is denied.
  Called by exception: ATI. ACE. APM. ProcessID:03780 threadID :) server. XmlDocumentSaver::SaverWorker domain name::(APM.) assemblyName (CCC.exe) Server, Version = 2.0.3867.36565, Culture = neutral, PublicKeyToken = 90ba9c70f846762e)
  ************************************************************************************************************************
  
   
  

  Hi SavannahMick,

  The entries refer to the drivers/files associated with the ATI. There are some useful suggestions in the forum link below. See if one of them works for you.

  Thousands of events ati2mtag 62464 s (DVD_OV UVD Information) in the system event log

  The CCC does not open after 10.8

  Catalyst Control Center (CCC.exe and MOM.exe) keep quit

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error database that can be updated windows found 0 x 80070490. access to the path "C:\windows\softwaredistribution" is denied. »

  Original title: error in database that can be updated windows found 0 x 80070490

  When you try to repair windows update on my rt surface I get the following error message - "error in database that can be updated windows found 0 x 80070490.  repair windows update the database, access to the path "C:\windows\softwaredistribution" is denied. "Any help?

  Hello

  Welcome to the Microsoft community.

  It seems that you are facing problems trying to fix Windows update. We're here to help. It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. Why are you trying to repair Windows update? Are you facing problems during the installation of the updates?

  To resolve this issue, follow these methods:

  Method 1:

  I suggest you follow these steps to run the Windows update Troubleshooter:

  a. open Control Panel.

  b. click on Troubleshooting.

  c. click show all in the left pane of the screen.

  d. in the list of options, click Windows update.

  e. click Next and follow the on-screen instructions.

  Method 2:

  I suggest to refer to the article and try to run the system update readiness tool:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  If you are always faced with the question, please answer and we will be happy to help you.

  Thank you.

• Access to the file is denied. You don't have permission to access the file C:\PROGRA~1\Office14

  Hello

  I created a new e-mail account and fails my.  Running Microsoft Office 2010.

  When you open outlook, I get the error:

  Access to the file is denied.  You don't have permission to access the file Email C:\PROGRA~1\Office14\*** address is removed from the privacy * address email is removed from the privacy *.

  Cannot open your default e-mail folders

  Click Help and I get the following message:

  This error can occur if you attempt to run Outlook in a Terminal Services session when the Outlook offline (.ost) data file is used by the console session.

  To access this instance of Outlook, exit the current Terminal Server session, and then start a new session using the following run command in Microsoft Windows:

  mstsc.exe/console you must be an administrator on the computer that accesses the console session. You can not access a console session of a computer that is running Microsoft Windows XP Home edition. But you can do this from a computer that is running Microsoft Windows Server 2003, Windows XP Professional, Windows Vista, or Windows 7.

  For more information, see article 826488 in the Microsoft Knowledge Base.

  You must make sure that your e-mail records are kept in a place outside system such as C:\Program Files folders. It is a restriction of the UAC.

• access to the path of QML

  Hi, how to access the path an audio or image QML file and send it to the CPP file for further processing.

  In fact, I'm looking for the code that retrieves the filepath and filename information when the "onTriggered" handler is called when the user clicks on the file.

  Thanks for the help.

  or you can also try:
  give IDs for ListView listView

  _mycode. FileInfo (listView.datamodel.Data (listView.Selected ()). URL)

• AEGP_ObjectType_VECTOR and access to the path of control points

  if (type == AEGP_ObjectType_VECTOR( )

  
  

  There is no much to find associated with this object type. I understand that it is a shape layer, but I still found how can get the path on this layer.

  A cable would be greatly appreciated.
  

  Research.

  Realized that there is no API specialized for VECTOR (shape layer)

  It's just a tree of dynamic flow.

  And, strangely, the shape layer is implemented with a mask...

• export plugin: how to learn the path of the source of the exported files?

  Short version: an export plugin to determine the path of the source of an image that was exported as a copy in a temporary directory?  If so, how?

  Long version...

  I am a user SDK newbie, writing a plugin which implements multiple images to my own external program which them melts and produces one or more new images that the user probably wants to reimport into Lightroom.

  I have the plugin works OK with export to a temporary directory.

  Now I would like to add a feature in which my program gets access to the path of the folder to the original image, so that it can offer the user the ability to record images of result in the same directory.

  Is it possible for the export plugin get the source for an exported image path, say an object of rendering?

  Can also export plug-in information identical or similar, otherwise, for example by determining the path for the folder that is currently selected in the Lightroom Catalog?

  Thanks for your suggestions!

  -Rik

  I don't think that the metadata for source path are in the exported file.

  Once I manually coded the source path in the jpeg file to export, but I stopped doing that, now I just save some info I need as part of the ID "at a distance" (assuming that to publish the service).

  But maybe I misunderstood. I mean, when export the source path is readily available as rendition.photo:getRawMetadata ('path') - is that what you mean? (I thought before that you were speaking after export, possibly loooong after export...).

  Rob

• Is the path of export to illustrator the only way to get a psd w / clipping appears in Illustrator?

  I'm wasting time having to put my image in Illustrator, then manually align the clipping path. You used to be able to save a file with a clipping path an EPS in photoshop, select "maintain vector data", place it in illustrator and cmd-press Y to see the clipping path. I need the image and clipping in Illustrator and image path is too complex to create a mask of Illustrator. I tried to save it as an EPS but "retain vector data" is gray.

  Save a PSD. If you need access to the path, then incorporate him (the image in Illustrator).

  If you just want to use the path for cutting, set it as a clipping path in Photoshop.

• connected as long as User1 I can only access the srv record (Explorer) - execute / run as he is denied (the path not found or insufficient rights)

  Original title: denied enforcement program

  Configuration:
  -Win server 2003 standard (in the Working Group)
  -Portable Acer Aspire 5100, Windowx XP Home Edition sp3

  Problem:
  On laptop, there are 3 users: administrator (administrators), (power user) User1 and User2 (user).
  Logged on as administrator or User2 I can access the server disk, run the executable SRV drive etc, but connected as
  User1, I can only access the srv record (Explorer) - execute / run as it is denied (the path not found or)
  insufficient rights). The same phenomenon occurs even if User1 receives administrator rights.
  On the server side there is no restriction or limitation to User1 (because it's in the group, where
  any member of this group (also User2) has no problem). Logging as User1 on others
  PC there is no problem.
  Grateful for any suggestions / help.
  Marjan

  Hello

  Try to take possession of the file or program and check.

• How can I access the Clipboard when denied.

  I am trying to copy and paste, but Firefox said I'm being denied access to the Clipboard and to enter 'about.config' in the address bar and then navigate to signed Applets Code Base_Principle_support and enter the value true. When I type in about.config in the address bar, it just goes to a search engine for "about.config.

  Boolean prefs can be toggled with a double click on the pref or by right click and "toggle".

• VISA: Is denied access to the resource or to the remote machine.

  Hello.

  I use a cRIO-9076 to communicate with a Keithley 2400 via port RS-232 on the cRIO. I have a vi test which is built using the Keithley 2400 drivers and it works perfectly fine with the vi is located under 'My Computer' in my project. If I'm moving that vi on the potion of distance OR cRIO9076 of the project and try to run the vi I get a

  VISA: (Hex 0xBFFF00A8 to the resource or the remote machine access is denied...

  I realized I need to add something to the list of remote access on the cRIO that I find a little confusing. I want to use the serial port on the cRIO by VISA to communicate to the Keithley, so I need to give permission to cRIO on the cRIO? I'm obviously confused.

  I tried to add a simple * (wildcard) to the list of access as a temporary solution but I still get the same error.

  I would like some advice.

  Thank you

  Roth

  cRIO 9076

  Lab View 2013

  Keithley 2400

  NI-VISA 5.4.0

  If you want to move the vi to the CRIO, you can change the name of the resource.

  my example is based on the cRIO-9068. When running at MAX on my local host, it can show as below.

  The resource for the cRIO-9068 should like 'ASRLx:INSTR '.

  

  Good luck!

• Access denied: the IP address of this computer host is not on the list of eligible access of the target.

  Hi all:

  I was working normally with my NI9024 CRIO to my work. I went home and when I came back the other day. I tried to compile my application to work.

  The surprise was that I got a strange message "access denied: the IP address of this computer host is not on the list of eligible access of the target."  Now, I can not connect a CRIO device. I tried to reset all the IP addresses in the CRIO and my PC computer. What can I do?.

  Yes. This is the solution. I had to uninstall the NOR-RIO software on the target. I have uninstall everything on the CRIO. Then I reinstall the software, but I had also to program the fpga, the host and target. And I also have my IP, on the measure and automatition software. I found a big bug I guess.

  Thanks anyway. National Instrument of love. Hope to work there one day.