Text of the word IDCS4 cannot capture (defining poetry...)
I see books on poetry and the approval of the withdrawal right a few words.
Many lines is normal (between the left edge) but others are aligned on the right side.
This text comes from Word with hyphens but no style is present at all.
The 'normal' lines show 0 values in the fields (0 left indentation, withdrawal of 1st line o, etc.)
Special lines are always showing a withdrawal from front-line between 50-70 mm (they change in each poem)
If I apply a style all the formatting is lost.
And I can't look at the find/replace indented lines because ALL values change.
But these special lines are marked in some way. They are the only ones that are indented.
I want to characterize them.
Is it possible?
Hi Mariana (not a not post here before? "I see '1 messages'?)
Yes, it's a common problem. You want to apply your styles, but you can't because it would remove the formatting that you want to keep. Generally, concerning than fat, italic and similar, but every now and then something else pops up.
You want to apply the same style to each of these lines and with just the preserved dash? I'm thinking "script opportunity" here.
There are, it seems, two ways to handle this with a script. The simplest is to 'save' the indent, apply the correct style, then put the value of back withdrawal - what makes a style "Style +»
Another way is to make a new style for each line, "based on" the right style, but with the dash on the right values for this line.
(And I should probably tell you right away that the disadvantage is that it might make a lot of new styles...)
Tags: InDesign
Similar Questions
-
How can I transfer text of the word in the page web firefox supported?
When I try and copy and paste text from a word in a web page document supported by firefox, it is said that it is impossible, but there must be a way to do it without having to retype everything
You are welcome.
Could you please click the button "solved it" to take your post out of the loop?
Thank you.
-
Table filters break when using of text with the words "AND" or "OR".
With the help of JDev 11.1.1.3.0
Hello-
The filters in the table seem to treat the words 'and' and 'or' differently when they are used in the filters in the table. Is it possible to change this behavior? I have a few sets of data where these words appear in the data. When the user performs a search on the data and uses the words 'and' or 'or' the filter no longer works. (He returned lines nil or returns all the rows.)
Test case:
1 create a filterable unalterable for the resources table. DEPARTMENTS table.
2 set the Department name column to be case insensitive in its filtering:
3. run the page.<af:column sortProperty="DepartmentName" filterable="true" sortable="true" headerText="#{bindings.DepartmentsView1.hints.DepartmentName.label}" id="c2" filterFeatures="caseInsensitive"> <af:outputText value="#{row.DepartmentName}" id="ot4"/> </af:column>
4. in my HR. Data REPRESENTATION, there is a service with the name "control and credit." In the service name filter, type
a. 'control' and press ENTER - service of "control and credit" only comes
(b) "control and" and press ENTER - only 'control and credit' Department appears
c. 'control and credit' and press ENTER - ZERO departments appear.
5. the Test cases for "GOLD". In the service name filter, type
a. 'or' and press ENTER - displays all departments.
I tried a few other words SQL in the filters but only 'AND' and 'GOLD' seems to break things.
Is this a known bug?
Is there a solution?
Thank you for reading my questionThe list of documents http://docs.oracle.com/cd/E21764_01/web.1111/b31974/web_search_bc.htm#BABCCBCF 'AND' and 'GOLD' as 'Operators of Query-by-Example search criteria' are not text but the operators.
You can try to join the text in the filter with single or double quotes and see, is that it treads in the form of text.Timo
-
Paste the text of the word in Apex Textarea
Hi people,
I have a customer who wanted to change their forms of Word (something like customer survey) screens Apex... everything went a lot, but they realized that when they try to copy text in the forms of the word in Apex textareas some characters will appear as a up-side-down question mark. Some characters are apostrophe, consecutive points (...) and so on. I don't know what is the best way to handle this, I think to write a function that escapes the characters of a text passed and match the decoding itself each time users encounter a character of bad news... but maybe someone has a better idea...
Thank you
SamExecute the statement select in the APEX or Developer SQL in BOTH environments and see if they match, otherwise you will need to discuss with your DBA...
select * from v$nls_parameters where parameter='NLS_NCHAR_CHARACTERSET';
Thank you
Tony Miller
Webster, TX -
Conversion of underlined text of the word by using a script
Hello
When you place a Word document, I want to use a script to convert the text underlined italic character Style (which I have already created). Which should read the line of app.findGrepPreferences to find the underlined text?
Thank you.
It's as simple as that:
app.findTextPreferences = app.changeTextPreferences = NothingEnum.nothing; app.findTextPreferences.underline = true; app.changeTextPreferences.appliedCharacterStyle = app.activeDocument.characterStyles.item("italic"); app.changeTextPreferences.underline = false; app.activeDocument.changeText();
unless she needs deep integration into your current script.
Related issues of script can better ask in the forum script: InDesign Scripting
-
Problems by placing the text of the word
I am placing a MS word doc text in my master pages in InDesign and it imports only the part of the text, the first 8 pages and after a lot of blank pages, I see the little red as well as in the box in the lower right corner of the text box, but no matter how many times I continue the flow to the next column the rest of the text will not appear. The MS doc is in the fonts, I did not, but I thought I could do a search and replace once the text flows in because there are a lot of bold and italic, put in shape that I don't want to lose by copying and pasting from Word into InDesign. Anyone have any idea why this is happening, or what I can do to get around all of the 36 pages of text?
I often see complete Word of the nonbreaking spaces files, too. It is disabling the break a too large number of nonbreaking space online to send the rest of the doc in excess. It is not rare AT ALL when you crop in ID, especially if the column width is different. A picture of great line that would too.
In addition to reviewing the file in Word, you can place the cursor to the last point see you text in ID and open the story editor to see what is beyond. If it's not obvious (turn on nonprinting characters that you can see the nonbreaking spaces), choose the first two paragraphs in excess and leave the Dungeon options (can be on all lines solidarity or solidarity than hass all the lines together and have too many lines to fit to a page) or No Break is applied to the first line in excess. Check hyphenation, as well.
-
Export text in the word document
Hello
I have a projector that generates a report of the user at the end of a section of questions and answers. Currently, the report is saved in plain text format. The customer wants to add a text formatting (bold text and color) and join the file to open it in Word when double-clicked.
Does anyone know of a way to save the text of a member of the cast as a Word document?
Thank you
Deryckfrashjiveturkey wrote:
> Does anyone know of a way to save the text of a member of the cast as a Word
> document?Use rtf or html put in shape and give it knows what an extension .doc - Word
do with it.You can get the rtf or html of a member of text file using member("whatever").rtf or
Member("whatever").html - put in a variable and save it with a xtra
fileIO, propSave or buddyFile.I did not have the last Director, so I don't know what the implications of
Unicode will be.Andrew
-
GREP text between the words selection
I want to select all of the text between [2a] and [F2A].
The problem is that there are n paragraph between the 2 elements as in the following example:
[2A]
Lorem ipsum dolor sit amet.
[ME] Lorem ipsum dolor sit amet.
[KING] Lorem ipsum dolor sit amet.
[F2A]
I tried:
(\[2A\]).+(\[F2A\])
But there may be more than one error in my code. Any suggestion?
Put "(?s)" at the beginning of your GREP for force "single-line" mode. "
By default, GREP only works on a single paragraph, and so it stops when it encounters a hard return to the research. Simple line of setting mode allows to treat the hard return as any regular character.
You can change the "." + "in the middle of your expression to. + ? ", to match the shortest chain possible. Default value is GREP catch as much as possible, so if you have more than once these codes in a text, it will happily select everything from the first to the last instance.
-
the password parameter cannot be defined immediately
I have installed TouchId and password in order to use the portfolio and use Touchid with applications. In settings, it shows now use access code immediately when I put twice before to 1 hour. continues to change and is now only immediately selectable. No other options shown. So, indeed, I can't use my fingerprint to unlock the phone. I have not configured to use this access code. He either value immediately which is causing my problems with my impression of not recognizing or there is problem with fingerprints. Any suggestions?
I have an iPhone 6 s.
If you have active contact ID, the only option available is to him needing a code to access immediately. That's how it is supposed to work.nI think you are misunderstood, however. You can use the ID to touch or typed in password when the aircraft crashes. Contact ID is considered to be a type of password.
-
Narrator reads the text of the word document
Narrator
Hi Tehilahw,
Welcome to Microsoft Windows Forums!
Narrator works with other applications?
If this isn't response return else you will need to visit the forums of office.Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Microsoft Office, and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you want.
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
Thank you and best regards,
Bindu S - MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum and let us know what you think. -
need me OCR software to convert the text scanned in Word?
I have a Photosmart 7510 multifunctional printer/ecanner and a PC with Windows 7, the new reasonably. I don't see how I can convert my text scanned in Word and cannot find OCR anywhere. Must OCR be purchased separately now?
Hello
Yes, you can buy the OCR program, but there are a few free options such as:
http://free-OCR-to-Word.en.softonic.com/
http://www.free-OCR.com/for Word:
http://Office.Microsoft.com/en-AU/Word-Help/scan-and-edit-a-document-HA010254879.aspx
Kind regards.
-
Text in the drop-down list used in the report
Hello
I want to use in my report, the text of the index selected in the combobox. Unfortunately, the variable for a ComboBox is L1, not as text T1. So, when I want to insert text in the report, I cannot write @L1 @ because it appears in the index, not the text.
For example
ComboBox1
0 Red 1 green 2 yellow
and if I choose 1. Green
I want to put 'green' as a text in my report. I can't call as a variable because the variable L1 is not text.
How can I do this? Please
Hi andrea11hr,
You can use a table for the exchange of information. Please take a look at the attached example
Greetings
Walter
-
I have trouble to change the color of the text in the code.
Hello!
I can't change the color of the text in the code when I capture the mouseover event, I'm changing the color of the text by using this code: sym. $("mnuItem-MouseOver") .css ({"color": rgb (0,0,0)})
But without success. I tried variations as containing the rbg (0,0,0) in quotes, all in quotes, or using #000000 or rgba (0,0,0,1.00) but, again, without success.
Help or direction would be appreciated.
Thank you
Robert
You forget the quotes around RGB.
For example, use this:
change of red color
SYM.$("mnuItem-mouseover"). CSS({'color':'rgba(237,23,23,1.00)'});)
-
Switching to text in an InDesign file done with text in a Word document?
Hello
As I recently started working with InDesign, this question may seem quite silly. I have a finished InDesign file and what I have to do is to replace the text in the InDesign document with the text in a Word document. The text frames must remain in the same places, fonts may be the same, etc., so I just wanted to know how to replace this text in the InDesign document without copy - paste the text in the Word file in each text block. Basically, I have a guide to the user of a device in one language, and I have to insert the translated text that the user guide is in another language. Is it by linking documents?Yours faithfully,
VerySeriousPerson
It is a way to do it. But you will need to format the new document with paragraph styles.
- Open existing document ID
- Save as and change the file name (language to translate to?)
- Insert the cursor at the beginning of the document
- CRLT/SHIFT/END to select all of the text in the document (this is for Windows)
- Delete
- File/Place the file with the text you want. Make sure that you press SHIFT while placing the file, the text flows to all text frames.
- Format the document as you wish
Second step is very important to keep the original file.
-
Simple question - alternative text of the attribute in the same Word document
Ok. I am having a brain freeze and cannot find the answer in the help of the OPA. Simple question.
Is there a simple way to alias an attribute for use in Word?
For example, the following two conclusions create 2 attributes where I want only 1 attribute.
annual percentage rate = 6
APR = annual percentage rate
Is there a configuration option or something to alias APR as the rate of annual percentage for use in Word? I want to use in the same Word document. Something in my head tells me that I have seen that once before, but all of a sudden, I've got a brain freeze.
Sorry for such a simple question, but sometimes I get too deep into the weeds.Hi Paul,.
You may think the style of the legend of OPA. In the 2007 OPM Office Ribbon it's called legend of the table, but I think that it works with the rules of non-table in Word as well - it is certainly used to.
It's a style of OPA rule which can be used when you want to refer to an abridged version of an attribute, for example "APR" rather than "the annual percentage rate. According to me, that it applies only to the immediately lower rule where it has been defined in the doc and the doc not complete.
I did a quick search in the help of the OPM and found references to the style of legend, but I have not found a description of the functionality (search is not too good if).
Essentially how it works...
Above the rule to write the version abridged, then the word "is", then the text of the full attribute, for example
APR is the annual percentage rate
Side note: I have always "BOLD" the "is" in the callout line. It is not necessary, but I want to do it because it makes it more clear at a glance what part is the shorthand and which part is the text of the full attribute.
Then apply the style of the legend of the table to the line, then put your Word table or the ordinary rule underneath, for example
[legend]APR is the annual percentage rate the result = APR * 10
I use this feature occasionally. Usually it is when I have calculations in Word tables and I'm trying to make the more readable left column, for example using something "APR" in the formula so that it does not take much space.
See you soon,.
Jasmine
Maybe you are looking for
-
Disappeared from the toolbar URL, and modules are not coming back.
Hi people. Once more Firefox drives me crazy, I woke up this morning, turned on the old computer, Firefox has started, and I have no URL bar. I tried to restore it, but no luck. Been looking for the Firefox forums for a few hours, found similar quest
-
Firefox crashes (even in safe mode) constantly and use 50% CPU while doing
I use Firefox 36.0.1 and Windows XP (32-bit version). Lately, Firefox made this weird thing where it stops randomly load anything, as if the connection has been broken (it isn't, any other works very well). In this case, Firefox uses 50% CPU, when it
-
OS win 7 home Premium
-
Huawei Ascend P1 Skype crashes constantly
I have a Huawei Ascend P1 and by using the latest Skype update crashes constantly, it must be restarted often. Before 4.0 than it used to be OK, it crashed from time to time, but now it crashes every 5 minutes. Its unusable. Someone knows how to fix
-
BEFSR81 - problem with file sharing
Recently, I replaced my old DSL with with a BEFSR81 Linksys router. I have 2 computers connected. Both computers are able to access the internet, but are unable to 'see' each other on the network or to share files or printers. Both are running Window