Text-to-speech add distressed

Similar Questions

• Is it possible to add the text to speech (TTS) for slidelets individual or other objects 'pop-up '?

  Hi all

  This question is somewhat related to this issue: http://forums.adobe.com/thread/525525?tstart=0

  So now, I have a slide with several slidelets "pop-up". Finally I intend to add human speech at each of these slidelets (under the tab Audio caption text), but at the moment (for demonstration purposes), I would like to use the text-to-speech (TTS).

  The only type of TTS option that seems to be allowed is at the level of the slide, but not inside a text caption... This seems odd.

  Speaking of weird, speech management feature and Audio seem all too weird or very limited features. The management of the speech seems to only read the text inserted by entering the slide. No other options are available.

  I know that I could save the speech as individual wave files and insert them through the Audio tab, but... It then, I thought that it would be an easier way to use the TTS in Captivate 4.

  Can I buy a clue?

  Thank you!

  Hi Shawn

  TTS works at the level of the slide. Best bet is to insert a blank slide. Add notes. Convert to speech. Then, find and rename the file to preserve you. Rinse and repeat as needed until all TTS was created. Now, they should be in the library where you can freely assign them to everything that you need.

  You answer during the lunch break on a contract job...

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• The word text to speech recognition works not

  Hello

  I installed a program called natural reader, which reads the text using different voices, so that you can hear what is on the page rather than just read it. I just bought the program and I can't get the voice to work. I contacted the company and they told me to go to the Control Panel/Speech Recognition and fix it on my computer because it is a computer problem.

  So when I click on speech recognition, Text to Speech (I have Windows 8 is told by the way) - and I click on the button "Preview Voice", he does not play the text at all as it is supposed to do. If I click on the audio button, speech/headset is checked. But I see there are two points lower than who say THAT NVIDIA and both say they are "not connected." And when I click on the Advanced button, "use preferred audio output device" checked. And "DT speakers/headphones high definition" is the only thing available.

  As I said, I don't know much at all about computers, but I'll add this part, just in case it might have something to do with it. I noticed that this red warning icon appears next to my videos and things like that in my files. Its something that was not there before. When I look in my windows applications he says only he X Box. I also noticed that when I open all my apps to show, little red X Box icon has one of my videos here instead of the app icon is red, which is weird, I think that? Sure on that note. In any case, I installed the windows classic interface, so I can't watch all softs tiles all the time on my desktop with windows 8 because I find boring. So I don't really know much about the apps anyway. But it's just that I did a complete system restore on my computer recently and that was not there before, at least, it was not associated with my videos. So I was wondering if this has nothing to do with the thing of the voice does not work in speech recognition? As I maybe the wrong thing associated with sound or something? I also noticed on my desk there is an icon called "Connected Music Powered by Universal Music Group" and when I clicked it, nothing happened.

  Can anyone help please?

  Thanks, Claudia

  Hi Claudia,.

  It seems that the settings are correct in the text to speech Audio settings.  I understand that the speech/headset is checked (default device).  You can try to speakers as default device (green check mark on the speaker) and check if you are able to hear the text when you click voice overview through the PC speakers.

  See the article:
  Accessibility in Windows 8
  http://www.Microsoft.com/enable/products/Windows8/default.aspx

  In addition, the red outline that you see when you click on applications, video files seems to be the Narrator running in background.

  Turn off narrator and check the issue:
  Office, press Windows + U .
  Click Spie Narrator.
  Click Exit Narrator.

  
  Let us know if it helps. If the problem persists, we will be happy to help you.

• How can I select text to speech on a State of button Down?

  Within Captivate 8 I want a button to the low state of play an audio file of the text to speech. How is it done exactly?

  I don't know if I should select the Down State and then go to Options / Audio or Actions on success play Audio.

  Thanks for your help.

  I found the answer on how to add sound to a button. Create the speech synthesizer with the voice as you want.  Delete once created voice over on the timeline. Create the button. Select the State of the button you want, in my case the idle state. Once in the low state go to Actions and the terms of success: select the sound to play. Then click on the folder next to the form of the Audio icon. This opens the audio in the library. Select the audio that I want to use.

• CP9: Microsoft "Text to Speech" - David only works

  Hello

  Poor David works too hard - no Microsoft colleagues contribute to it.

  It has to stop - whenever I have asked Hazel, Zira, Helena, Selena to help, they do nothing... it was David who must intervene and take charge.

  Other officers of speech work very hard.

  For the people of techno:

  Whenever I chose another agent of microsoft - voice of David is registered.

  Slide notes - TTS - select agent - + - add text etc.

  Non-Microsoft officials record ok.

  I use Windows 8.1.

  Concerning

  Donal.

  Donal salvation,

  Thanks for reporting your problem. We had the chance to look into your question.

  The voice that you mentioned is the default voice Windows 8.1. With the target operating system (win 8), you can select a voice as the system default and even TTS voice translated into Captivate9.  To change the voice by default, you can follow these steps-

  1) go to control panel.

  (2) open the speech recognition dialog box.

  3) click the text-to-speech option and the speech properties dialog box should open.

  (4) to select the default voice change and the same is for TTS in Captivate9.

  For more flexibility and dynamic use of the voice in your project, you can always go ahead and download the voices of Captivate_9 by clicking on the download link available in the management of the speech in captivate9 dialog box.

  Hope this helps you.

  Thank you

  Aditya Tiwari

• Text-to-speech audio continues to play for any other slide - but the current slide is suspended from the output

  Captivate 8.0.1.242 - Windows 7 64 bit - swf format.

  
  

  I have this weird error. I have the audio text to speech in my classes. I don't want the PlayBar of captivate. So I have buttons in the content to navigate forward. Each slide is hanging out and waiting for the user to click on the buttons navigate forward. My sound works for the first 2 slides text. Otherwise said, he plays as in the timeline and then stops. Waiting for the user to click on the button before you go to the next slide and the same routine. But after 2 blades, it will not stop. He continues to play the whole audio other slides in the whole cptx. But the current slide is suspended. So I hear everything supposed to be played for other slides, but all I see is a slide.

  
  

  When I click on the next slide, he begins to play the audio where it supposed to start for the current slide and plays again all other text in audio from the other slides. This is repeated again and again. Anyone have any idea why this is happening?
  

  Check the calendar for audio clips, increase the duration of the slide a little and make sure that there is a small space before and after the clip.

  Sorry wanted to add a screenshot, but this feature is currently disabled on this forum.

• Text-to-speech in slidelet

  Hello

  Here's my situation:

  I have an image in grayscale on a slide which is accompanied by an audio speech synthesis. I want to be able to roll on 3 areas (top, middle, low) and the bearing will be

  1. Use this part of the image to the color,
  2. set up a title next to the portion of the image that is in color
  3. have the legend read using text-to-speech

  I tried to do a slidelet to show the colored upper version, but when I put the colorful picture, he was behind the image in grayscale. I made the slidelet was above the image in grayscale in the timeline panel, but still it did not show the colored upward version.

  Also, how can I add TTS for the slidelet? When I'm in the slidelet and open the notes slide, it shows me audio for the whole slide. Any change I make seem to affect the entire slide, not only the slidelet.

  I am a novice at all this, so feel free to talk to me slowly.

  Thanks for any help!

  You can read the audio only when running which has already been recorded and downloaded.  You cannot generate text-to-speech during execution (but it would be really groovy).

  You can only show or hide the objects on the slide viewing.  Your advanced actions will not affect slides that are not currently on the timeline.

  If you want an interactive object (for example your X) in the corner of a text caption, you would need to combine these two objects (text caption and button form with an X as its text), give the Group an ID and then use the button shape to trigger a tip action that MASK being grouped.

• Text-to-speech works through headphones

  I have an iPhone running iOS 9.3.2 and text-to-speech 6 only works if a headphone is plugged. I can hear it well just using headphones, but it does not come out of the speaker, so those who are disconnected. Any ideas? I rebooted, reset and finally restored.

  Check if your speaker works. If you hear no sound or distorted sound of your iPhone, iPad or iPod touch speaker - Apple Support

  -AJ

• Insert break custom text-to-speech in iOS

  When I text on my MacBook Pro I can insert a break custom TT with [[slnc 500]] and these codes. But when I insert these codes in Notes on the iPad, the TTS happy to read these codes.

  What are the codes, as appropriate, for the insertion of a break custom text on iPad for text-to-speech?

  Simply Sseems that iOS does not support this feature. Let Apple know that you want it via this link http://www.apple.com/feedback/

• Puntuation orders for text-to-speech

  Is there a list of orders of punctuation for TextEdit and or other applications to change the behavior of Text to Speech?

  Thank you

  Edited to remove a duplicate.

• How to pause the text to speech

  Hi all

  I m new text at the speech and generally enjoyed apple hear the text of PDF files, but do not know how to take a break between the two. I need the shortcut on the way to regain the text after a few breaks in between if I missed something. Y at - he of the shortcuts that I can use.

  I am currently using air Macbook Os X EL Capitan(Version 10.11)

  Kind regards

  Sangeet

  In v5.6.1 Pages and releases from previous pages, the text-to-speech feature can pause via the Edit: speech: stop talking about the menu item. However, speech will take not from where it was suspended, but at the beginning of the document, or text selection. No solution for that.

  However, you can create a script Automator single action that will transform all text selected in a Pages document in an audio file on the desktop. That support good break and resume simply control-click audio file icon.

  1. In your Dock, click on Launchpad (rocket icon)
     1. Select other, and then the Robot Automator.
  2. When the launches of Automator, select New Document: Service: choose
  3. Locate the music library from the Automator library entries
     1. Drag and drop the text to the Audio file action to the right in the bigger window of workflow
     2. Drag and drop the encoding to MPEG Audio action below the previous action
     3. Use the settings in the screenshot accompanying as a guide. I have deliberately omitted an extension of file name for the audio file to the output of the first action it will be applied after the conversion in the second action.
     4. Now, the file menu: Save... and in my case, I gave the name of Service as text2voice.
     5. Quit Automator
  4. In System Preferences: keyboard Panel: shortcuts: Services, scroll down until you see the entrance to text2voice and check to make it active.
  5. In the Pages, select as much text you want to listen to, and then in the Pages menu: Services: text2voice - send text selected to the audio file.
  6. Click the controls to play/pause/repeat on the icon of the audio file, resulting.

  Click the following command to expand the service described above.

  

• Milestone text-to-speech does not?

  Hello

  I in Egyp, t when the text-to-speech settings menu, the voice data install is dimmed, I tried several times looking for google voice data on the market to install it but it did not.

  No idea of the experts.

  Kind regards

  Khaled

  An application very good text to speech that is on the market and I think free is called:

  Vlingo

  I would give this a shot, a great program that will do exactly what you are looking for and more.

• How to make the text of speech recognition of a video or dvd

  I have an instructor who is very difficult to understand on dvd or mp4. I have a broken ear drum and have all kinds of internal sounds... so I want to have speech recognition type a transcript of his mp4 to share with my class. How can I do this?

  Hello

  I have fear of speech text is dictated in direct speech. Take a look at this article

  http://Windows.Microsoft.com/en-us/Windows7/dictate-text-using-speech-recognition

  However, you can use your favorite browser to search for a possible third-party software convert MP4 to text.

  WARNING OF THIRD PARTY
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Text-to-speech

  Hello

  I want to start with text-to-speech in LabVIEW.

  I searched the forum and doing a bit of research on Google, but was not able to start any where!

  Kindly guide me from where I should start. Windows has an easy to read text, but how to get that in labVIEW

  Thank you

  It's here.

• I'm trying to get the text to speech reading and have questions what should I do?

  I went through the steps to look at the control panel and go to the properties of speech box and click audio output and proceeded with the release of his speech (text-to-speech) I selected the audio device use preferred and I also tried to use this audio output device and not worked in order to test the sound.

  I am able to use my itunes and speakers stereo but can't get anything to record that I have a microphone - please help I need to know if I am missing drivers and if so please tell me how to download these drivers or how to get them.

  Hello

  I suggest you to follow the exact steps in this Microsoft KB article and check if it helps.

  How to configure and use text-to-speech in Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306902

  See also: How to install and configure speech recognition in Windows XP