HP Pavilion P6000: Create the recovery disk

Similar Questions

• Create the recovery disk

  I have a pavilion dv6 Windows 7 and he needs a reconstruction. It doesn't have a D: partion but I wanted to play it safe and to create the recovery disk set in case there was a problem with the drive D. I bought some Maxell dvd + R disc but are not accepted by this utility.

  According to the utility I use either + r or - R disc, why did he not accept

  Thanks for any constructive help

  Get your product number by pressing Fn + ESC key or check the Service tag on the bottom, may be under the battery.

  Go to 'Support & drivers' at the top of this page. Enter your product number. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Recovery media should be listed as an option to purchase, if you live in the United States / CA. usually around $17.

  If a recovery media is not listed, use the link that I posted above to get the phone number. Often if you support your software fails to create the set they send a free of charge.

• Satellite U500-17F - problem of calibration by trying to create the recovery disk

  I have exactly the same problem with the calibration by trying to create a recovery on Maxell DVD media disc + R I tried twice 2 DVD different each with the same error. Then I burned one of them on my desktop without any problem. When I tried an Emtec DVD + R support on the laptop it burned successfully.
  The laptop is Satellite U500-17F with Mat * un DVD-RAM UJ862AS. There is an incompatibility of Mat * one disc with Maxell DVD and must be fixed with a firmware update but Mat * one did not like.

  Hello

  I had a problem with a different disc from different manufacturers.
  Finally, I tested the TDK and Verbatim and could create the recovery disk using DVD R media!

  Test other brands!

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• Satellite Pro A300: How to create the recovery disk

  Hello
  I just bought a Satellite Pro A300 with Windows XP.
  I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
  The information gives instuctions on how to proceed for the Vista machines, but not for XP.

  I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
  There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?

  Any help appreciated,
  Thank you
  Mick

  Hello

  You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?

  Please check this box.
  Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.

  But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.

  Have you checked all of the items in the box?

• Backup in Windows XP Wizard allows no choice of drive to create the recovery disk

  Backup Wizard requires a 3.5 floppy to create a system restore disk. When my system and many others have more 3.5 disks... How to solve?

  Original title: windows xp absence of 3.5 diskettes and Backup Assistant

  Hello JohnAdams2461,

  You're right, that Windows XP requires a floppy drive to create the recovery disk.
  Most newer systems do not have a floppy drive.

  View information in a previous thread with the same question.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cant-create-system-recovery-disk-using-backup/a3e2312b-006D-4f80-940c-254e5f00f1acz

  Best regards, k

  Marilyn

• "Can't find the necessary files" cannot retrieve or create the recovery disk. Help!

  I can't refresh PC or create the recovery disk. He keeps going with error message "Cannot find the necessary files" and tells me to insert the recovery media. There is no system restore point, and I've upgraded to Windows 7 Windows 8 Pro without a disc, so I can't do anything. Help! Strangely, nusrmgr.cpl disappeared, although I had seen the shortcut a few weeks ago (no, I'm not deleting it).

  Hello

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. Why are you trying to cool off the computer?

  2 are you facing problems with Windows 8?

  3. how many accounts is configured in the computer?

  You can scan the file system (CFS) auditor. This will replace the corrupted Windows files.

  Follow these steps:

  (a) start the desktop view.

  (b) open the command prompt, right-click in the left corner when the windowappears, and select prompt (admin).

  (c) type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  You can also try to create a new user account and check if the problem persists.

  If the problem persists, you will need the DVD to perform repair installation of Windows 8. If you download the installation of Windows 8 files, check your emails, there should be a link to download an ISO file. Download and burn the file to a DVD.

  The DVD to perform the repair.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.

• Create the recovery disk - operating system developed at level

  When I got to my x 201, I got Win 7 Home and I created the recovery disks. I then upgraded to Windows 7 Professional and I tried to create the new recovery but message says system recovery cannot be created only once.

  I can create the new collection to reflect the Win7Pro?

  Thank you very much for the help.

  pit says:

  I can create the new collection to reflect the Win7Pro?

  Thank you very much for the help.

  Hello, ditch,

• How to create the recovery disk

  Hello

  can someone help me create a recovery for my laptop Hp Pavilion G6 disc - 2330 m

  Windows 7, 64 bit.

  After inserting a dvd, I went to all the programs/maintenance/create a system repair disc

  but it gives the following error:

  The system repair disc could not be created

  The parameter is incorrect. (0 x 80070057)

  I posted earlier on my laptop freezing and respondent very late in command. I decided to create a recovery disk but have resulted in this issue.

  Help, please.

  Concerning

  Maury

  I suspect that the operating system on your laptop is probably not an OEM copy because of which the Recovery Manager is not available

  FYI, if the Recovery Manager was available, you can restore (restore your laptop back to the factory State) without the need to create recovery discs. The D:\ disc that is the recovery partition that would help you to do on your laptop.

  Try these steps and see if it works.

  1. click on Start button and type "devmgmt.msc" without the quotes and press ENTER key

  2. right click on the drive D:\ - HP Recovery partition and select Mark Partition Active.

  3. what would give you an alert/prompt, where you must choose Yes brings you to the Recovery Manager screen and restart your computer. You can follow the link that I provided above to start the process of recovery on your laptop.

  Note:

  Please backup your files before recovering on the laptop that it would result in the loss of data.

• Satellite A300-15 has failed to create the recovery disk

  I'm trying to create the recovery for the first time disk (portable purchased before 5 days) and stop just before the end, the creator:

  Cannot read the file.
  F:\06343XSP5. STORMWATER MANAGEMENT
  (Error code: 020150-20-00000000)

  What's not?

  I posted this already in another thread, but I can repeat it;

  I noticed that not all DVDs are compatible and sometimes it of not possible to burn the recovery due to the problem of DVD DVDs.
  I put t know what DVD discs you use, but I had a good experience with TDK DVD-R.

  So my advice is simple; Try different DVD from different manufacturers

• Recovery disk for a T130: Re-create the recovery disk

  Hello

  I own a Toshiba T130, white model that comes with Windows 7 x 64, 4 GB of RAM and a DVD player. I recently tried to install a Linux operating system through a process that is automated via a network installation (Shoemaker), which has actually wiped clean the hard drive before installing the system, contrary to my intention at first actually install it on a separate partition, along side windows!

  It happens that (day 1, after having bought the laptop), I have already saved/stored the folder of HARD disk recovery (integer) initially placed on a second partition in Windows 7, on an external USB hard drive, but did not have a DVD or USB recovery media as it is recommended. The content of the file is as follows:

  + HDDRecovery
  + ODDFiles
  | + Start
  | + EFI
  | + HDDPREP
  | + HTMPREP
  | + Sources
  | + Tools
  + OriSetenv
  + Swing
  | 10347XSP.swm
  | 10347XSP2.swm
  | 10347XSP3.swm
  | 1034...
  | 10347XSP8.swm

  I think that these files are what is needed to create a recovery media and I have a need to restore my computer to its original state and recreate my Windows 7 environment. After all, it is here where I get my work.

  So, you guys don't know if I can build a support of restoring these files? If so, what is the procedure?

  Thank you very much
  Waiting for your response.

  -Ilyes Gouta

  As far as I know is now too late for the creation of recovery disks. If I remember well in s manuals is clearly described that you can install OS using only two procedures: using installation of recovery of HARD drive or using created the recovery DVDs (connected external USB optical disc drive).

  I'm 99.9% sure that the installation of the external HARD disk is not possible.

• Failed to create the recovery disk - error code: 0E01B5-26-00037304

  Hello

  I bought the new laptop Satellite A300-1MC, but I was without recovery disc, so now I try to do disk recovery, but his show me then the following error:

  A power calibration area error
  and
  error code: 0E01B5 - 26-00037304

  I tried 5 times 4, and used a NEW disc, but still show me the above problem.
  Will thank you for answer you.

  Thank you
  Jan

  Use please TDK or Verbatim DVD-R media and I think everything will work OK.
  I created the recovery media on several laptops using these media. It works perfectly.

• Satellite U400 - failed to create the recovery disk - bad DVD player?

  Hi all

  I have a 13 inch Satellite U400.
  Due to problems with my Softkeys, lighting and hibernation status (any help on thos would also be useful) I want to create a recovery DVDs with the Toshiba Recovery Disk Creator.

  The thing is: it starts when I have a CD in the DVD drive, but as soon as I put a DVD in (what is needed), it gives me an errormessage that said something like 'another application is using this drive or no disc recording where found in the laptop. 0D00E4-F0-00000000 error code).

  My DVD player does not work properly, I can play movies and the drivers and the status is ok too.
  I noticed, that error code changes, but I don't know how to get the recovery disk creator will.

  What can I do? Change something in the registry?
  I don't know what happened on my laptop, I bought a few months ago - new. I guess that, reset everything would bring my softkeys, lighting and hibernation status back.

  So, if someone nows how to work at least one of the problems, please give me advice.

  Thanks in advance,

  wiglip

  Hello

  Did you create virtual CD/DVD drives with special software? If so, remove the software completely. In addition, if you have installed burning, programs, you should check if they will be started when Windows starts and if so, disable the beginning upward. So go to start > run > msconfig > start. Here, you can disable the start of burning software (for example Nero, CD Burner XP, etc.).

  And what DVD are you using for burning? I have good experiences with DVD - R Verbatim and TDK discs. These are high-quality discs and you should try it too!

  Last but not least, you need to remove the upper and lower registry filters. It is always advisable to the problems of the CD/DVD drive:
  (1) run Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Depending on your problem with the keys to enlightenment that you should try to reinstall the Toshiba value added Package. This determines the buttons of enlightenment, FN keys and other special functions on your laptop. I had a similar problem with my Qosmio F50 illumination buttons and I posted something on this subject in the Qosmio forum that you should try it too!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724

  Good luck! :)

• Bought the new model of HP m8530f... impossible to create the recovery disk?

  Bought above the pc about 3 months... still new to all this, I'm just a simple user of office applications and surfing.  Fallen on the disk recovery and reading that you can create your own recovery disk or the order of HP.

  Once again, the pc brand new.  I was all order from HP, but saw wanted to try to do it myself and save $20.  I followed the steps, arrived at Recovery Disc Creator, the moment where I click Next I get an error like this:

  "A recovery disk set was created for this pc. That one game is allowed per pc.

  WTF?  It was brand new, out of the box!

  All this experience?  I really don't want to pay HP $20 when I can make myself at home.  However I can not because as the "already created recovery disc?

  What can I do?

  I was able to connect and discuss with a representative of HP.  They have made an exception and will betray me a free recovery disk!

  Now, that's service! That means a LOT to me!

  Thanks for your suggestion to CherylG!  I have not found this file, that you suggested... and not an expert to change the extensions of file... so don't go any further!

• Satellite P300-1CN - failed to create the recovery disk

  Hi, I tried to create the disks of backup for my new P300-1CN recovery, but I get a power calibration error (error code: 0E01B5-26-00037304) when the progress gets 50% on the first disc of "current" bar and 25% along the bar of"progress".

  I have now tried 3 times and exactly the same thing happens every time.

  I have the cable power in and power on a full battery.

  Any ideas?

  G.

  Hello!

  Have you tried the disks from different manufacturers? I prefer to use DVD - R Verbatim and TDK discs.
  Check it!

  Also on the site of Toshiba, I can find a few updates firmware for the CD/DVD drive. Check if you have such a unit and update the firmware.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye