Text to Speech Agents

Similar Questions

• Can I change voice after I created text-to-speech?

  I am able to change the voice AFTER I already created the text-to-speech in slide Notes of Captivate 8?

  Thank you.

  You can find this a bit tedious if you have generated voices for an entire course and the client decides they want another voice.

  You can manage the voice through the window 'Management of the speeches', Cp8, click the Audio Menu and select the speech management.

  Inside this window, there is a drop-down list titled 'Speech Agent.'

  Make sure that you replace 'MIcrosoft Anna' voices TTS custom downloadable for Captivate.

  

• CP9: Microsoft "Text to Speech" - David only works

  Hello

  Poor David works too hard - no Microsoft colleagues contribute to it.

  It has to stop - whenever I have asked Hazel, Zira, Helena, Selena to help, they do nothing... it was David who must intervene and take charge.

  Other officers of speech work very hard.

  For the people of techno:

  Whenever I chose another agent of microsoft - voice of David is registered.

  Slide notes - TTS - select agent - + - add text etc.

  Non-Microsoft officials record ok.

  I use Windows 8.1.

  Concerning

  Donal.

  Donal salvation,

  Thanks for reporting your problem. We had the chance to look into your question.

  The voice that you mentioned is the default voice Windows 8.1. With the target operating system (win 8), you can select a voice as the system default and even TTS voice translated into Captivate9.  To change the voice by default, you can follow these steps-

  1) go to control panel.

  (2) open the speech recognition dialog box.

  3) click the text-to-speech option and the speech properties dialog box should open.

  (4) to select the default voice change and the same is for TTS in Captivate9.

  For more flexibility and dynamic use of the voice in your project, you can always go ahead and download the voices of Captivate_9 by clicking on the download link available in the management of the speech in captivate9 dialog box.

  Hope this helps you.

  Thank you

  Aditya Tiwari

• Inappropriate speech agent

  Hi all
  
  I feel stupid kind of announcement, but here goes. To convert text to speech, I chose accidentally the box "don't show this again" in the agent selection dialog box speech. Only problem is, it was reported Kate, and I prefer Paul.
  
  Now, the only way I see to change it is to go to Audio > speech and change management it slide by slide.
  
  Is there a way to change my speech agent 'default' Paul, as he now does not show me the selection dialog box when I convert the text to speech?
  
  Thank you!

  Hi Melissa

  Maybe you already know at this place:

  Click Edit > Preferences... > Global node > node settings, click on the Confirmation of messages... button.

  See if the checkbox at the bottom left the mention 'Speech Selection' has been deleted. If so, click it and dismiss the dialog boxes.

  I hope that will bring back the choice.

  See you soon... Rick

• Text-to-speech works through headphones

  I have an iPhone running iOS 9.3.2 and text-to-speech 6 only works if a headphone is plugged. I can hear it well just using headphones, but it does not come out of the speaker, so those who are disconnected. Any ideas? I rebooted, reset and finally restored.

  Check if your speaker works. If you hear no sound or distorted sound of your iPhone, iPad or iPod touch speaker - Apple Support

  -AJ

• Insert break custom text-to-speech in iOS

  When I text on my MacBook Pro I can insert a break custom TT with [[slnc 500]] and these codes. But when I insert these codes in Notes on the iPad, the TTS happy to read these codes.

  What are the codes, as appropriate, for the insertion of a break custom text on iPad for text-to-speech?

  Simply Sseems that iOS does not support this feature. Let Apple know that you want it via this link http://www.apple.com/feedback/

• Puntuation orders for text-to-speech

  Is there a list of orders of punctuation for TextEdit and or other applications to change the behavior of Text to Speech?

  Thank you

  Edited to remove a duplicate.

• How to pause the text to speech

  Hi all

  I m new text at the speech and generally enjoyed apple hear the text of PDF files, but do not know how to take a break between the two. I need the shortcut on the way to regain the text after a few breaks in between if I missed something. Y at - he of the shortcuts that I can use.

  I am currently using air Macbook Os X EL Capitan(Version 10.11)

  Kind regards

  Sangeet

  In v5.6.1 Pages and releases from previous pages, the text-to-speech feature can pause via the Edit: speech: stop talking about the menu item. However, speech will take not from where it was suspended, but at the beginning of the document, or text selection. No solution for that.

  However, you can create a script Automator single action that will transform all text selected in a Pages document in an audio file on the desktop. That support good break and resume simply control-click audio file icon.

  1. In your Dock, click on Launchpad (rocket icon)
     1. Select other, and then the Robot Automator.
  2. When the launches of Automator, select New Document: Service: choose
  3. Locate the music library from the Automator library entries
     1. Drag and drop the text to the Audio file action to the right in the bigger window of workflow
     2. Drag and drop the encoding to MPEG Audio action below the previous action
     3. Use the settings in the screenshot accompanying as a guide. I have deliberately omitted an extension of file name for the audio file to the output of the first action it will be applied after the conversion in the second action.
     4. Now, the file menu: Save... and in my case, I gave the name of Service as text2voice.
     5. Quit Automator
  4. In System Preferences: keyboard Panel: shortcuts: Services, scroll down until you see the entrance to text2voice and check to make it active.
  5. In the Pages, select as much text you want to listen to, and then in the Pages menu: Services: text2voice - send text selected to the audio file.
  6. Click the controls to play/pause/repeat on the icon of the audio file, resulting.

  Click the following command to expand the service described above.

  

• Milestone text-to-speech does not?

  Hello

  I in Egyp, t when the text-to-speech settings menu, the voice data install is dimmed, I tried several times looking for google voice data on the market to install it but it did not.

  No idea of the experts.

  Kind regards

  Khaled

  An application very good text to speech that is on the market and I think free is called:

  Vlingo

  I would give this a shot, a great program that will do exactly what you are looking for and more.

• How to make the text of speech recognition of a video or dvd

  I have an instructor who is very difficult to understand on dvd or mp4. I have a broken ear drum and have all kinds of internal sounds... so I want to have speech recognition type a transcript of his mp4 to share with my class. How can I do this?

  Hello

  I have fear of speech text is dictated in direct speech. Take a look at this article

  http://Windows.Microsoft.com/en-us/Windows7/dictate-text-using-speech-recognition

  However, you can use your favorite browser to search for a possible third-party software convert MP4 to text.

  WARNING OF THIRD PARTY
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Text-to-speech

  Hello

  I want to start with text-to-speech in LabVIEW.

  I searched the forum and doing a bit of research on Google, but was not able to start any where!

  Kindly guide me from where I should start. Windows has an easy to read text, but how to get that in labVIEW

  Thank you

  It's here.

• I'm trying to get the text to speech reading and have questions what should I do?

  I went through the steps to look at the control panel and go to the properties of speech box and click audio output and proceeded with the release of his speech (text-to-speech) I selected the audio device use preferred and I also tried to use this audio output device and not worked in order to test the sound.

  I am able to use my itunes and speakers stereo but can't get anything to record that I have a microphone - please help I need to know if I am missing drivers and if so please tell me how to download these drivers or how to get them.

  Hello

  I suggest you to follow the exact steps in this Microsoft KB article and check if it helps.

  How to configure and use text-to-speech in Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306902

  See also: How to install and configure speech recognition in Windows XP

• How can I turn off text to speech that I turned it on to listen to the voice and now there seems to be no way to turn it off

  Original title: speech synthesis

  How can I turn off text to speech that I turned it on to listen to the voice and now there seems to be no way to turn it off

  Hello

  Follow the steps below to disable text to speech in Windows Vista.

  (a) go to the section on your main screen where you see the time displayed.

  (b) it is called the "bar", all kinds of small icons are visible here, there's even a gadget of the small arrow that would normally point to the right if you have a lot of programmes to help you use windows.

  (c) "left click on"the small arrow in a circle - this will expand the list to display small icons, drip slowly mouse over the bar of 'system' in order to launch a pop - up of each icon, once you reach the icon that says something like "text to speech tool","make a clique right".

  (d) a pop-up list appears showing what options are available - option whatever go to "Properties" or "settings", "click on" this element gives.

  (e) a new Panel will appear - in select here the article that says something like "launch on startup", it should have a box next to it, that will be ticked or marked in some way - "click" this element so that it seems to be clear and followed by the button "apply" "click" the button "OK" - which should solve your problem.

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tell-me-what-you-want-A-Beginners-Guide-to-Windows-speech-recognition

   

• Text-to-speech engine IS corrupted

  I have a problem so I use text-to-speech and the Narrator, but now they have no job and I get this: VTENGSAPIS50 LOADTTS_ENG ERROR!  I tried to find a way to fix it but there is nothing, or I'm not in the right place.  So please help me! Corlis Tindel

  Hi Corlis Tindel,

  You try to run a SFC scan and check if it helps to repair the corrupted files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Text-to-speech does not work on Microsoft Sreets & trips 2010 on Vista"

  OS: Vista/s. installed 2010 Microsoft Sreets & Trips but text-to-speech does not work. Also installed on my XP machine and it's market

  Why no text to speech using Microsoft Streets and Trips 2010 on my Vista machine.  It works fine on my XP machine.  "Is IT" did not find anything worng woth the sound system.

  Hello peacefulponzer,

  I suggest that you post your question on the Microsoft newsgroup "Streets and Trips" for a better response to your question:

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.streets-trips

  Site of Support of Streets & Trips 2009:

  http://www.Microsoft.com/streets/en-us/support.aspx

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.