Text wrapping does not not in CC

Similar Questions

• Can you help me? Text wrapping does not.

  I work with the 'recommended News' widget under "compositions" and was change some characteristics. I want to place an image and a text to wrap around him (because the model provides), but the envelope text tool is not highlighted so I can modify it. Can you tell me what I need to do to make this work? I went back to the basic instructions and that they did not work for me. Why wrap tool does not work?

  You must copy the picture and paste as a fluid element (!) within the text. A photo lying separately on a text box can not be rolled up.

• Text wrapping does not

  I use InDesign CS6. I am trying to wrap text around a circular picture with a 17-point run box (stroke is aligned in the Center). The text is 70 points and flush left; the circle is on the left with the text box on the right. But when I select the cirlce and the text box, then turn on text wrapping, nothing happens. Fields in the skin Panel that allow you to change the space between the object and the text are all grayed out so I can't change them to 0. I checked the text properties of the area and have confirmed that 'Ignore skin' is not checked.

  Any thoughts on what could be the problem?

  I just tried to create an empty circle with no stroke above the circle I'm trying to wrap my text around, added text wrap to the new circle, and it worked fine.

  So I checked preferences, and it turns out "skin affects only the text under ' has been checked for some reason any.

• Text wrapping does not not with embedded pictures.

  When I cut a picture placed and replace to make anchored, it encapsulates all of the underlying text nor moves it in the column.

  For anchored objects, text wrapping works a little differently, and the behavior depends on the type of anchor. For inline/above line anchors, dressing affects the text after the anchor position, for custom anchored objects wrap affects only text in the lines that follow the line containing the anchor point.

• Text wrapping does not work despite having "Ignores the text to the line" unchecked?

  Hi all

  I have a weird problem of InDesign CS5.5. If I create a framework and enter text as usual, when the text reaches the end of the frame it layers itself during the first part of the text? I imported the paragraph styles that I previously created and used without problem of thousands of times in the current document. I tried to start a new standard paragraph style, and it does exactly the same thing. I've looked everywhere and you can't find the information on wrap around an object that is not a problem for me! The clock is against me in a big way, so would appreciate any help you can give me - I'm sure it's something simple?

  Of course, that looks like attack the value 0.

• HP officejet pro 8600 save as editable text (OCR) does not

  HP officejet pro 8600 save as editable text (OCR) does not

  the printer reports: can not detect install OCR s/w...please

  IrisOCR 12.3.4.0 is indicated as being installed

  How can I get printer recognize/find OCR?

  1 uninstalled existing installation

  2 deleted all files

  printer 3.re - installed s/w

  4 still does not

  5 uninstall printer new s/w (about you 4th time)

  6. deleted all files in HP printer

  printer 7.re - installed s/w BUT

  8.re - installed in a different folder: HP-2

  Now everything works fine

• When I create a button "submit" text "Submit" does not appear on the actual button.

  When I create a button "submit" text "Submit" does not appear on the actual button. Anyone know what is the problem?

  Depends on how you file the form. In Acrobat, it has a property to set the appearance of the button. In AA 8, field properties appear as below:

  

  It may vary in other versions (I on other machines), but the basic idea is the same. Need to add the label.

• Text wrapping will not work?

  For some reason, a text wrapping will not work. I placed the object above the text. but whenever I try to create I just get this outline look odd around the text (see image below). Thanks much for any help!

  

  Your objects are grouped. This should not be the case with the text. You must also remove the wrapping of the text itself (the lines around the text is the scarf).

  Apply it only to the circle.

• For Acrobat 9. Editing text tool does not work.

  Acrobat 9. Editing text tool does not work - even on documents created with my computer using fonts. Problem 2: when you try to export to Word 2010 there is no option for format Dox, only the .doc that belonged to earlier versions of Word.

  When you run the Recognize text command, you can select ClearScan for PDF output style. This then allows to modify the text in the PDF document. Right now, you probably use the searchable Image option by default when running OCR, which creates an invisible text layer in your document under the actual image. That's why the change does not appear in your document, but it is displayed when you export to Word. Here's a little trick that explains what you need to do:

• Click and drag in the Favorites or in text fields does not

  Click and drag does not work with favorites anywhere, or any text fields. He used to work a lot in v11, but not v12

  I tried to revert to my version of Firefox v11 backup but it keeps automatically updated to v12 despite disabling auto update in the preferences and even when it is offline - frustrating.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• print easy text.vi does not work in the executable

  I have 3 computers to target that runs labview 2012 on a PXIe8101controller.  In my statemachine the vi prints a report using simple text, report vi (palletized report generation) at the end of the trial.  Its an executable vi on all 3 machines.  On 2 machines, it works fine.  On the 3rd he hangs up when I'm logged in as a standard user.  If I log in as an administrator, it works very well.  The thing I noticed is that on 2 machines, that it works, the image is "factory...". 1.2.1F6' (under control panel > systems).

  On the test equipment that it only works in admin mode the original image is 1.2.4.f1.  MAX is also 5.3.1 on that past fine and 5.5.0 f1 on the one that does not work on.  Everything I'm mssing?

  Thank you.

  solved...

• Tablet Pen of entry icon beside text boxes does not

  I use an Adesso Cyber Tablet M14.

  1. Even when I have the checkbox enabled with options that entry tablet icon does not appear next to text Realtors areas more.
  2. Second the Show tab Input Panel, even when the pen is out of scope works. When this check box is not selected the Input Panel tab is not shown even if the pen is in range.

  Two problems with the contribution of the Tablet, I don't exactly know if it's another service, the Tablet input service is started.

  I remember using at least the icon entry next to the text boxes in the past I don't know why it's broken now?

  Thank you

  As a matter of fact, the shortcuts are no longer works, I think it has something to do with the drivers, but the works of pen input that I can draw and others with her?

  Sorry I just had to install the drivers provided with the drive not the drivers that I had saved on my computer.

• BlackBerry 10 Q10 Message text box does not scroll past two lines

  When you type a message in the message text box, the text does not scroll to the 3rd entry line until the line is completed. I find myself typing blind to line 3 of my message until the line 3 is full... then it scrolls to the top and becomes visible in the message text box. Any suggestions?

  Had the same problem.  You must have changed the font size of your device to a point 10 or above fonts.  If you set it to original font size which is 8, it works perfectly again.  IHAVE that mine now set at 9 and it the text field scrolls correctly now.  It must be a bug in Blackberry software so if you read these messages please fix it as I'd rather watch 10-point font.

• Change the size of the text only does not work

  Font size standard on most of the Windows I have open in Windows 8 is a 5 or 6. I'm in front of my computer, 6 to 8 hours per day (teacher online), and it's the single most annoying problem that I have ever met.  "Change the size of the text only ' on my display settings page is grey - there is no solution.  Can I change the size of everything, that gives me giant icons, but the text on all the windows is still tiny.

  I hope someone has a useful suggestion. Please don't tell me to go to "Change the size of text only." This is the function that does not work.
  My Windows 8 was purchased in January - part of the Microsoft $! 5 offer to people who bought computers between October and December of last year. The installation went fairly well, but I had this problem of fonts since then.  ASUS computer laptop, Intel core I7, good resolution, good speed, ideal machine, except that Windows has me squint all that day, seven days a week.
  Thank you and best regards, all
  Reggie Audibert

  Font size standard on most of the Windows I have open in Windows 8 is a 5 or 6. I'm in front of my computer, 6 to 8 hours per day (teacher online), and it's the single most annoying problem that I have ever met.  "Change the size of the text only ' on my display settings page is grey - there is no solution.  Can I change the size of everything, that gives me giant icons, but the text on all the windows is still tiny.

  I hope someone has a useful suggestion. Please don't tell me to go to "Change the size of text only." This is the function that does not work.

  My Windows 8 was purchased in January - part of the Microsoft $! 5 offer to people who bought computers between October and December of last year. The installation went fairly well, but I had this problem of fonts since then.  ASUS computer laptop, Intel core I7, good resolution, good speed, ideal machine, except that Windows has me squint all that day, seven days a week.

  Thank you and best regards, all

  Reggie Audibert

  Hi Reggie

  The option "Change only the size of the text" applies only to the text for the following items.

  Title bars

  Menus

  Message boxes

  Titles of palette

  Text of the icon

  ToolTips

  What you need to do is select the link "Custom resizing options" directly above the option "Change only the text size.

  In the dialog box move the cursor in the rule box, hold down the left button of the mouse and drag the rule. If the size is 100%, try to start with it to 125%.

  Click OK, and then apply. You will be asked to disconnect / connect to before the change takes effect.

  If 125% does not for you try to bump the size up one another 10% gradually until you are satisfied.

  Let us know if it works for you.

  Concerning

• Why the text tool does not work?

  whenever I choose the text tool that doesn't work. It allows me to create the bar, but the curosor doesn't even blink. I type and its Blanck. I hit accept the test I typed shows on the layer, but not on the screen, I need help. I've even updated, reinstalled. I need help I am ready to throw my laptop. Please someone

  Is this a new problem with an old facility?

  Or a new facility and the Type of tool has never worked?

  What is the size of the image in pixels and resolution?  Something that sometimes happens is that people get the wrong units and I think they are pixel setting when it is in fact centimeters.  If you have a low resolution game, like the default 72 dpi, which can cause the tiny text, it might as well be invisible.  This is particularly problematic when the Type is set on Points.  To test simply do a new document with reasonable proportions.  that is 1000 x 1000 pixels, 300 dpi

  Another test is to select the text layer and use free transform, or zoom so you can see if you have a small bounding box.

  If this isn't the question and the text color is not the same as the background, then...

  First step is to reset the preferences.  (The relocation does not overwrite the preferences file).

  Also try resetting subject tools.

  Then uninstall Photoshop and use the cleaning tool before reinstalling.