textEntry object - visible data member does not

Similar Questions

• DATACOPY to @MEMBER does not?

  I'm trying to revive an archived issue of Alp Burak 5 years about Datacopy in @Member does not.  I use 11.1.2.3 and it still does not seem to work.  I'm looking for a way to copy it to another Member a member chosen in a form-based.  Okay, maybe it's the specific planning, but it is a problem of Essbase, given that the error is coming up with the @MEMBER as a target.  Is there a way to get around this?

  My attempt:

  DATACOPY {UserChosenMember} to @MEMBER (@CONCATENATE ("FixedPrefix.", {UserChosenMember}));

  I do not see a restriction for @MEMBER or DATACOPY, then is it not a bug or documentation is incomplete?

  http://docs.Oracle.com/CD/E40248_01/EPM.1112/essbase_tech_ref/frameset.htm?launch.html

  http://docs.Oracle.com/CD/E40248_01/EPM.1112/essbase_tech_ref/frameset.htm?launch.html

  Original message:

  question calcscript: Datacopy with function @Member

  Hello

  I need to write a calculation where I need to copy data from one member of the game to a dynamic member chosen.

  I use the @Concatenate function to create the Member target the runtime and finally using @member to convert the string to a member.

  However the function datacopy isn't taking function @member as target and immediately launch a mistake.

  Can there be another way around this? Equation in this case is not indifferent, because it requires some conditions if before the equation and that the fix is so huge that it takes forever to complete the calculation.

  It's planning & Essbase 11.1.1.2.

  Cl2

  OK, I checked... doesn't seem like DATACOPY will validate with a function on the RIGHT side.  It would be nice if the mistake was unclear on why it's broken.  The documentation States DATACOPY that a member's name should be transmitted, although again, it would be nice if it was more explicit.

• Why do write can not be performed because the number of data channels does not match number of channels in the task.

  Possible reasons:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of job channels: 8
  Number of data channels: 1

  Lama says:

  The DAQmx vi writing gives me the error. If I run a single channel, isn't a problem. Multichannel gives me error.

  You are funny! Why tie yourself to work VI (single channel) instead of one that gives you errors (multichannel)?

  (If your car does not work, you bring car your wives to the mechanic, right!)

  What is the exact text in the multichannel 'physical channels' when you do the AO control?

  Lama says:

  I did a sequence to ensure that each function has been run in the correct order. Wouldn't a race condition.

  All you have to do is wire the 'start of task' error at the entrance of error of the DAQ assistant and then back to 'stop task' and things will run in order. Guaranteed! Think the stream! Everything else can run in parallel or the order is irrelevant.

  First convert the sequence stacked to a sequence of plate, remove the flat sequence and add the mentioned son. Now, do a "cleaning pattern.

  A when stacked with the inhabitants of the sequence is one of the worst construction you can possibly do. It makes the code difficult to follow, impossible to maintain, difficult to debug.

• the windows boot configuration data file does not contain a valid entry os

  Hello

  I got this message when recovery... I can't get the windows... I have the CD recovery, but when I boot it... It gives me this message

  the windows boot configuration data file does not contain a valid entry os

   

  
  How do I solve this problem

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( it must be the same version that originally shipped with your laptop - IE if your laptop comes with Windows 7 Home Premium, that is the file you need to download ) from the link below and use an app like ImgBurn to burn the ISO correctly file on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is - Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you may need are located by entering your full model number or Nr here.

  Kind regards

  DP - K

• "Error running query: the real member does not exist in the application.

  Hi all

  I have a HFM EN users need to run, but somehow they started getting this error "error running query: real member does not exist in the application". I traced their levels of access to mine, and I am able to run the same report without any problem but the user still getting the same error. what may be the possible cause. Please help me so that I can ensure the debugging.

  Thank you

  Zitouni

  I was able to solve this problem by checking the user of security principals class was trying to run the report for. The user did not have acesss on the class of the said security and change all, solve the problem.

  Thanks, Sattu

• EN error "the Member does not exist in the application.

  I get the Member does not exist in the error in the application all in area to open the report. Recently, I've renamed the member name (from "deferred tax liability" to "Deferred tax liability") in the application of HFM.

  Thank you

  MB

  I missed to change the name in a row. I changed it. It's working now.

  Thank you

• View zoom "fit visible" default definition does not work because it changes during scroll even if the "fit visible" option is checked. How to solve this problem?

  View zoom "fit visible" default definition does not work because it changes during scroll even if the "fit visible" option is checked. How to solve this problem?

  Hi andrik14218037,

  Once you have set to "Fit Visible" it won't change the zoom, scrolling.

  * Make sure that you did not press the Ctrl key while scrolling the page.

  Open Acrobat Reader DC, go to the Help menu & repair the installation, make sure also that it is updated Release Notes | Adobe Acrobat, Reader.

  Let me know if it solves your problem.

  Kind regards

  Nicos

• XML with a member does not properly in the data model

  I use XmlDataAccess class to load an XML list in GroupDataModel. Everything works fine if the XML file has more than one Member, however, it does not load if the list contains a single member. I use the following code to get the XML content:

  QVariant list = xda.load(home.absoluteFilePath("MembersList.xml"),"/members/member");
  

  I need to know if the list has only one or 2 + members, so I can direct the data model to load with the appropriate settings. Can I know the number of members in the list?

  This problem is closely related to this question, where a solution QML is given.

  Hi Mitch99,

  Please see this forum post for a workaround for this problem. I tested it and confirm that it works as with QML.

• Data hold does not work after changing time system

  Hi guys,.

  I configured Oracle Data Guard successfully between a primary database and a database physical standby.

  Later, I changed the date and time in the two servers at the level of the BONE (from 14 - Sep to the 13 sept). The time is the same on both servers, but it has been changed. Then, I created a test table in the primary database, but I see not in the database of relief, well that configuration sounds good.

  Could you please explain?

  It is 11.2.0.1.0 - 64 bit Linux.

  Here is the code:

  In the primary:

  SQL > select sysdate to double;

  SYSDATE

  ---------

  13-SEVEN.-15

  SQL > desc hr.test

  Name                                      Null?    Type

  ----------------------------------------- -------- ----------------------------

  A                                                  NUMBER

  B                                                  VARCHAR2(10)

  In the database backup:

  SELECT SEQUENCE #, APPLIED, FIRST_TIME NEXT_TIME

  FROM V$ ARCHIVED_LOG BY SEQUENCE #.

  SQL > 2

  SEQUENCE # FIRST_TIM NEXT_TIME APPLIED

  ---------- --------- --------- ---------

  232 06-06-SEPT.-15-15-SEP YES

  233 06-06-SEPT.-15-15-SEP YES

  ..

  ..

  261 14-14-SEPT.-15-15-SEP YES

  262 14-14-SEPT.-15-15-SEP YES <-here it shows the old date

  31 selected lines.

  SQL > desc hr.test

  ERROR:

  ORA-04043: hr.test of the object does not exist

  In the primary db:

  SQL > alter system switch logfile;

  Modified system.

  
  

  Pending:

  SQL > SELECT SEQUENCE #, APPLIED, FIRST_TIME NEXT_TIME

  FROM V$ ARCHIVED_LOG BY SEQUENCE #.  2

  SEQUENCE # FIRST_TIM NEXT_TIME APPLIED

  ---------- --------- --------- ---------

  263 13-14-SEPT.-15-15-SEP YES

  264 13-13-SEPT.-15-15-SEP YES <-new date shows fine here

  265 13-13-SEPT.-15-15-SEP YES

  266 IN-MEMORY, 13 SEPT. 13. - 15-SEPT-15

  35 selected lines.

  
  

  SQL > desc hr.test

  ERROR:

  ORA-04043: hr.test of the object does not exist

  Hello

  You can check availability using v$ view dataguard_status.

  You can make a request on a user table at the backup site if the standby instance is in recovery mode.

  to check your test table, you must stop the recovery mode and start in read-only mode

  Cancel log apply services:

  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;

  Open the database for read-only access:

  SQL > ALTER DATABASE OPEN READ-ONLY.

  Then you can query your table test.

  Concerning

• EL Capitan automatic date time does not work

  People

  I use an El Capitan 10.11.5 MacBook Air version.

  I noticed that the data and time does not work even though it was set to auto to time.asia.apple.com.

  I ran these commands on a terminal

  $ping-c 5 time.asia.apple.com

  Ping: impossible to solve the time.asia.apple.com: Unknown host

  $ping-c 5 time.nist.gov

  PING ntp1.glb.nist.gov (64.113.32.5): 56 bytes

  64 bytes from 64.113.32.5: icmp_seq = 0 ttl = time 44 = 386,629 ms

  64 bytes from 64.113.32.5: icmp_seq = 1 ttl = time 44 = 307,532 ms

  tell me ping works but not for the server ntp - time.asia.apple.com

  $nslookup time.asia.apple.com

  Server: 192.168.1.254 address: 192.168.1.254 #53

  Non-authoritative answer: time.asia.apple.com canonical name = time - ios.g.aaplimg.com.

  time - ios.g.aaplimg.com canonical name = site time.apple.com.

  Site Time.Apple.com canonical name = time - osx.g.aaplimg.com

  $cat /etc/ntp.conf

  Server time.asia.apple.com.

  $ ntpq Pei

  No returned ID association

  Please, back up all data.

  Open the window of network preferences, if necessary, by clicking on the padlock icon in the lower left corner and entering your password. Cllck advanced, open the DNS tab and change the addresses of the servers as follows:

  8.8.8.8

  8.8.4.4

  It's Google DNS. Click OK, and then apply.

  In Safari, select

  ▹ Safari preferences... ▹ Confidentiality ▹ Remove All site data

  and confirm. If you use another browser, clear the cache memory. Test. Any difference?

  Notes:

  1. If you lose Internet access after the above change is made to your network settings, remove the Google servers in the network preferences pane, then click on the TCP/IP tab, then click on renew the DHCP lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click on apply so that the changes take effect.

  2. I do not use Google DNS myself, but I tested it, and I do not recommend it or any other provider DNS; the addresses of the servers are only available for testing purposes. There may be privacy and technical issues involved in the use of this service, that you should personally study before deciding whether to retain the settings. Other public DNS services exist.

• 6361 versatile usb data acquisition does not automatically detect the SCXI chassis/accessories

  versatile usb data acquisition 6361 will detect automatically SCXI chassis and accessories?

  Hello kdCMC,

  As far as I know that the SCXI-1600 USB Module is able to auto-detect SCXI Modules.
  This is also mentioned on page 11 and 12 of the following SCXI to start document:
  http://www.NI.com/PDF/manuals/373236m.PDF

  All data (including USB-variants such as the NI USB-6361) have only a 68 pin shielded cable (IO) between the DAQ hardware and the SCXI chassis.
  This cable does not auto-detect opportunities since it basically just "transfers analog and digital signals" between SCXI chassis and DAQ hardware.

  Is there a specific document that created the confusion on this subject?

• Restore not working - the option to restore on my machine does not work. I've highlighted the dates. Does not work in safe mode

  Original title: restoration works not

  The weight restoration on my machine does not work. I've highlighted the dates but I get... impossible to restore messages. I tried switching off my virus checker (Norton) but with the same result.

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.

  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.

  It works for some configurations.

• enforcement of data protection does not allow me to install itunes

  whenever I try to install Itunes appears a panel titled data execution protection, aand does not allow me to load Itunes. ???

  Hello

  1. What is the exact error message do you get?

  2. what version of iTunes you are trying to install?

  3. are you able to install other programs on the computer?

  4. How do you try to install it?

  DEP is a security feature that can help prevent damage to your computer from viruses and other security threats. DEP can help protect your computer by analyzing the programs to ensure that they use the system safely memory. If a program tries to code running (also known as the execution) of memory in an incorrect way, DEP closes the program.

  Method 1: I suggest to uninstall any old version of this iTunes on the computer and then download and install the latest version of iTunes, then check if the problem persists. You can check the help below link.

  To remove, and then reinstall iTunes from windows XP:

  http://support.Apple.com/kb/HT1925

  Method 2: Problem installing iTunes or QuickTime for Windows: http://support.apple.com/kb/ht1926

  For your reference: Solve the problems installing and uninstalling the programs on Windows computers. http://support.Microsoft.com/kb/2438651

  You can also view the resources specific to iTunes. You can get in touch with the community of Apple or the support Web site for additional assistance on the issue:
  http://www.Apple.com/support/iTunes/

  Hope this information is useful.

• Windows Update keeps up to date but does not work.

  Custody of update Windows saying he needs for the update (the Shut Down button has a shield with an exclamation point), but it doesn't seem to update.  When I click the button it goes through the normal shutdown procedures (he does not give notice of update and do not turn off the computer message) and when I turn back takes several minutes to load.

  When I checked the history of update, it shows my last update was updated on April 14, 2016.  Today's date is April 21, 2016.  There are several attempts to update from March 8 to March 11.  11, since there were three dates more updates successfully.

  I ran the troubleshooting on the Microsoft site and he claimed set the two elements.  It claims to solve "Problems of installation of the recent updates" and "registration for the Service is missing or damaged."

  I ran that it twice and still had the problem so I got it check "Background Intelligent Transfer Service".  Who sets only the "registration for the Service...". ».  Then I got it check "Microsoft Update" and now it's only the fixation 'Service record... '. ' but not '... installation problems. »

  I then tried Microsoft Fix It, but I don't see if she has nothing because he did not report.

  My computer is a Windows 7 Home Premium.  BTW, computer Windows 8 my wife has similar, but not exact problems.

  Any ideas out there?

  Make sure you are excluding the updates recommended to install important updates

  

• Smartphones blackBerry 9900 data Plan does not work!

  Hi, new here, great site!

  I'm from Canada, with Koodo and bought a unlocked 9900 opportunity, my neighbor via a Classifieds site, and as much as I know it was his business phone.
  I wiped it it clean and improved the operating system to 7.01

  I noticed that the previous service logo remains still (Rogers) during boot-up/shutdown, hmm, OK whatever he is working with Koodo.

  I called Koodo to allow data, but nothing works. I called them and they told me to enter "bb.koodo.com" in the APN field with no username and password. Then to save the host Routing Table (he told me that he registered very well) but I did not receive a message. Also, we have removed battery and tried everything again. It still does not.

  It is H + at the top right of the screen, but who has always been there.

  She said that maybe the phone was restriction IP since I bought it used, and maybe BB Swiss Army tool could help me get off, but she didn't know how. So I downloaded and pushed some buttons (more precisely remove COD) and really messed up my phone... lol

  Just reinstalled OS7.01 once again and fortunately had a fairly recent backup.

  Suggestions for making data work, or do I need a new phone?

  Hello and welcome to the community!

  Serious9900 wrote:

  bought an unlocked 9900 used my neighbor via a Classifieds site, and AFAIK it was his business phone.

  Let's start there, because who can be tricky depending on what exactly is meant by "business phone". Reference:

  • Article ID: KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

  Many of the steps can only be carried out by the seller... for example, if the prior carrier still has a BIS account allocated to that specific device, so no other carrier will be able to create a BIS account for her, and a BIS account is required to use wisely. As a general rule, a carrier will come out only the BB from the account when the real account holder made the request... and you will not if this situation applies.

  In addition, if the device has been activated BES, you need to follow additional steps. Reference:

  • Article ID: KB30076 How to check for an it on a BlackBerry smartphone policy

  If there is an IT strategy, then there are a special method, you need to remove it, but it will be successful if the BES server, to which the device has been set already has the removed feature of it... you may need to ask the previous owner about it. If this BES server was deleted, you can use this method to clean up the it policy:

  • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  It is necessary to use this exact method... refer:

  • Article ID: KB16307 Actions performed by the BlackBerry smartphone during the removal of the user stored and application data

  Now, with all these preliminaries of the road...

  Serious9900 wrote:

  I noticed that the previous service logo remains still (Rogers) during boot-up/shutdown, hmm, OK whatever he is working with Koodo.

  As you guessed, it's irrelevant. BBs are still originally designed for a specific carrier... and some of these contractual carriers with BB to place a splash screen of starting the device ROM, that can never be changed. But, it does nothing other that that unit was built for this carrier... but as long as all other things correctly, it is not serious at all.

  But, to be clear, when you say "it works on Koodo", I guess that's your voice services? And are all now, you must operate your data services? If telephone services do not work correctly on Koodo, then it is useless trying to get data services going.

  Serious9900 wrote:

  I called Koodo to allow data, but nothing works. I called them and they told me to enter "bb.koodo.com" in the APN field with no username and password. Then to save the host Routing Table (he told me that he registered very well) but I did not receive a message. Also, we have removed battery and tried everything again. It still does not.

  But now say you "nothing works"... should I continue to assume this are information specific to the data, and that telephone services continue to operate properly on Koodo? Sorry for being blunt, but clarity is critical or waste us time on unnecessary things.

  When you say "he told me that he registered very well", which means exactly please? This means that he said something like 'Check pending', 'Record sent' or some other message popup? Once again, here the clarity is critical. If that's what you saw, then indeed it is not registered correctly. Rather, he made the application very well... but until the enrollment message arrives in the Messages application, then the intervention is required since the data network of the carrier did not and until it nothing for the data will be working.

  Serious9900 wrote:

  It is H + at the top right of the screen, but who has always been there.

  Upper case H +? Once again, just double check, since if she was tiny, that it would mean something completely different from that of capital letters. Top of case, this is what it must be.

  Serious9900 wrote:

  She said that perhaps the phone restriction IP since I bought it used

  I don't know what she thought about it. May be restriction of BES and if the above process I gave you can purify that.

  Serious9900 wrote:
  and that maybe BB Swiss Army tool could help me to remove, but she didn't know how. So I downloaded and pushed some buttons (more precisely remove COD) and really messed up my phone... lol

  Never good to a few buttons when you don't know what you do... I don't remember if BBSAK is able to remove political or not, but it can do a very good cleaning.

  Serious9900 wrote:

  Just reinstalled OS7.01 once again and fortunately had a fairly recent backup.

  And that could be part of your problems. If, for example, the device has one IT political edge, while part of a full process... which means that even if you happen to clean off, a complete restoration simply will return to the instrument, turning to your right back to where you started backup/restore. Instead, to do only a partial backup or restore, and more precisely to avoid data bases that have to do with THIS, political, business or something similar... the conservative approach is to only to backup/restore of critical databases you need (for example, contacts, calendar) and manually reconfigure the rest. Remove a policy is a tricky thing.

  Serious9900 wrote:

  Suggestions for making data work, or do I need a new phone?

  I think you have enough to start on top. Another question about whether Koodo, however, is if their network is configured to auto-fill your specific with entries HRT device model and service book. If their network is not, while actually explains everything. No carriers configure their network to support all models of BB... each one chooses a subset of the model numbers of BB and configure their network accordingly. But trying to use a model number BB on a carrier network that is NOT configured for this model results in number exactly what you live... their network will not automatically grow some HRT and SB entries on your device because their network does not recognize your device as a model BB number taken in charge.

  Looking at a reference that I can find, it seems that Koodo is configured for the 9360, 9300, 8530 and 9790. But not for the 9900. Now, is that with a proverbial grain of salt... that reference does not necessarily mean that the network of Koodo is not configured for the 9900, it's just an indicator that is not. Koodo can only tell you that answer for you.

  Good luck and let us know!