TextField legend on a separate line?

Hello

Using LiveCycle when drag the field of text on a page, the legends and the text box are on the same line.

I want captions and the text on a separate line box, how can I do this?

Thank you

Faraz

We can do it with the propertios of text field.

Access the properties of the layout of the text field.

In what the Caption properties select up/down for your needs.

Hope this will help.

Kind regards

Rambeau.

Tags: Adobe LiveCycle

Similar Questions

  • Synchronization of measurement DI/O with 5 analog in separate lines of various modules mounted on a NIcDAQ-9178

    Hi all

    I have a VI that measures analog 5 separate lines (pressure sensors, thermocouples in temperature, etc.) and 3 lines of DI/O (for a coder angular step phaseB and IndexZ).  I'm having a few problems (as follows);

    1 trying to simultaneously capture the reading encoder and analog playback, I tried setting them up on the same basis of 100 kHz time although the encoder reads at a different rate from that of the lines of I which produces squewed data.  So I tried to make the lines to HAVE it read at each rising edge of the pulse of the encoder, (this had to number 2).  Is there a way to make the lines SO the DI/O on the same clock sampling or better still in the same job for DAQmx?

    2. analog digital converter is too slow (ie the error that the previous conversion was not completed before a new has been tried), when trying to acquire 5 analog in different lines triggered by impulses from a line of digital IO ADC says its too slow, a work around that maybe?  Currently, I have a different task for each analog channel, is the cause of the error? I should concatenate the strings in a single task maybe? (any recommendations on how that would be great).

    I've been watching a lot of messages about the analog triggering from DI/O, although I don't think many of them have the same chassis and modules than me...  I work with a NI 9201 (Analog In), NI 9401, and a NI 9213 all hooked to a NIcDAQ-9178.

    As a plus for the previous post...

    After the validation, I came across this very useful utility provided by NOR.

    http://zone.NI.com/DevZone/CDA/tut/p/ID/11549

    It describes the synchronization between the DAQ hardware.  I guess that it is so a thread lost since the answers to my questions are answered in this website.

    Nick

  • Run the query to separate lines

    Hi all

    I have a button with the code "Execute_query", but the table contains duplicate, and I want to retrieve only the separate lines?

    Thank you

    Try this in trigger WBP:

    GO_BLOCK ("dept1");

    CLEAR_FORM;

    SET_BLOCK_PROPERTY ("dept1', QUERY_DATA_SOURCE_NAME, ' (SELECT DISTINCT * FROM dept1)');

    EXECUTE_QUERY;

    Kind regards

    Zlatko

  • I need to convert PDF to Excel, however, the columns and tabs make many merged cells and the number of columns empty. In addition to not separate the columns properly, I see many not separate lines together in the same cell. I think same as Adobe Acrobat

    I need to convert PDF to Excel, however, the columns and tabs make many merged cells and the number of columns empty. In addition to not separate the columns properly, I see many not separate lines together in the same cell. I even think that Adobe Acrobat Pro DC has limits. There is no way to set what points in columns to force the column break? Or create several columns that are unnecessary? How column in Excel, size fixed when import us text and define where breaks have columns of text?

    Google Tradutor para empresas:Google para appsTradutor sitesGlobal market Finder traducao Toolkit

    Acts traducao Instantaneasobre o Google TradutorCelularComunidadePrivacidade e TermosAjudaEnviar comments

    PDF does not contain columns, lines, formats, styles or other aspects of word processing or spreadsheet file formats.

    This is because the PDF is decidedly not a file format of word processor or a spreadsheet or something 'like' one of these.

    (see ISO 32000 for what PDF "is")

    Which allows to optimize the export of the content of a page PDF is to start with that tag well formed PDF (ISO 14289-1, PDF/UA-1).

    Without that export is what it is and we performs the cleanup of any necessary content using the native application for the export of files (MS Word or Excel).

    Be well...

  • Loads separate lines into PO_LINES through the interface tables

    Hi gurus

    I need to load a standard PO via the interface. In interface tables there are several lines using a single ITEM_ID, changing only ITEM_DESCRIPTION.
    This ITEM_ID is a service, each line represents a detail of this service.

    After the import process, in PO_LINES, there is a single line with amount total.

    How can I do to load separate lines in PO_LINES?

    Thanks in advance
    Oscar

    Hi Oscar,.

    Unfortunately, there is no way to do it using PDOI... Try to use the private api po_interface_s.create_document. But the problem is that you might not be able to use it as a... have to copy this API and modify as needed.

    Kind regards
    Praveen

  • Selection of separate lines

    Hi all
    I have a requirement where I need to select rows that have distinct values for a particular column.

    SELECT DISTINCT (CHART. COLUMN_X) TABLE.
    Implement the same I used a filter for the column and gave the 'application' to filter as ' DISTINCT (CHART. COLUMN_X).

    But I get a message error "is not valid for the DBMS of Expression".
    java.sql.SQLSyntaxErrorException: ORA-00936: lack of expression

    How to make this work?

    You can do this easily in the IKM.

    On the workflow tab, select your IKM, on the corner, there is a checkbox named "Separate lines", check it out.

    It will add a SEPARATE keyword in select it generated.

    Brice

  • CP5 narrow legends: insert a new line between existing lines

    In the Notes slide - closed captioning - 'Folienaudio' / 'Bilduntertitel' (narrow legends) is already there lines 1, 2, 3 and 4. I need to insert a new line between lines 3 and 4, but the + always opens a new line to the 2nd line.

    Is there a way to overcome this problem?

    Hello

    This can be done safely by the tab this subtitle in the audio slide dialog box.

    1. call the audio slide dialog box (shortcut: F5)

    2. go to the tab captions

    3. play audio

    4 stop the audio to the point where you need to add subtitles

    5. click on the button '+' to add captioning to the place you need.

    6. click on 'Save' to save the changes.

    This will save time.

    Rick: It could probably also completely accomplish the CC dialog box. I saw the recent problems reported with operation directly from this dialog box in CP5, so I offered to beginning of slide Notes.

    Ashwin: I do not see problems here Rick...

    Remi - Ashwin B

  • Separate lines of two tables related by a third

    Hello

    I need to write a sentence SQL of a group of SEPARATE lines, each line in a shape of: A.X, A.Y, C.IDBOLETA. Tables A and C are related through the table C, as follows:

    Table A: INDUSTRIAGEO

    VARCHAR2 (20) NIT NOT NULL,.
    CORRELAIGEO NUMERIC (2) NOT NULL,
    NOMBREAGENCIA VARCHAR2 (255) NOT NULL,
    DIRECCION VARCHAR2 (255),
    X NUMERIC (12.8) NOT NULL,
    IS NUMERIC (12.8) NOT NULL,
    CONSTRAINT PKGEOINDUST PRIMARY KEY (NIT, CORRELAIGEO),
    CONSTRAINT FKGEOINDUST FOREIGN KEY (NIT) REFERENCES INDUSTRIA (NIT)

    Table B: ANÁLISIS

    IDANALISIS NUMERIC (12) NOT NULL,
    VARCHAR2 (20) NIT NOT NULL,.
    CORRELAIGEO NUMERIC (2) NOT NULL,
    DATE DATE NOT NULL,
    IDINSPECTOR NUMERIC (4) NOT NULL,
    CONSTRAINT PKANALISIS PRIMARY KEY (IDANALISIS).
    CONSTRAINT FKANALGEOI FOREIGN KEY (NIT, CORRELAIGEO) REFERS TO INDUSTRIAGEO (NIT, CORRELAIGEO).
    CONSTRAINT FKANALINSP FOREIGN KEY (IDINSPECTOR) REFERENCES INSPECTOR (IDINSPECTOR)

    Table c: ANALISISBOLETA

    IDANALISIS NUMERIC (12) NOT NULL,
    CORRELAANALISIS NUMERIC (2) NOT NULL,
    IDBOLETA NUMERIC (12) NOT NULL,
    IDCATEGORIAINDUSTRIA NUMERIC (3) NOT NULL,
    CONSTRAINT PKANALBOLE PRIMARY KEY (IDANALISIS, CORRELAANALISIS),
    CONSTRAINT UKANALBOLE UNIQUE (IDBOLETA).
    CONSTRAINT FKANALBOLE FOREIGN KEY (IDANALISIS) REFERENCES COPS. ANÁLISIS (IDANALISIS),
    CONSTRAINT FKANALCATI FOREIGN KEY (IDCATEGORIAINDUSTRIA) REFERENCES COPS. CATEGORIAINDUSTRIA (IDCATEGORIAINDUSTRIA)


    Thanks for your help!

    Mario

    Maybe

    select distinct a.x,a.y,c.idboleta
  from industriaego a,
       cops.analisis b,
       analisisboleta c
 where a.nit = b.nit
   and a.correlaigeo = b.correlaigeo
   and b.idanalisis = c.idanalisis

    Concerning

    Etbin

    Edited by: Etbin on 4.5.2010 21:42
    the Elf of copy/paste started: b.correlaigeo instead of b.a.correlaigeo (as in the comment of the OP below)

  • How to remove duplicates in two separate lines in SQL?

    Hello

    I need to identify the data in double with two separate lines. See my below data structure.
    INDEX OF NAMES NAME_1 START_DATE END_DATE FLAG VALUE
    B ON 275 SE 13/12/2005-31/12/2010 1
    SELF 1 375
    SELF 1 475
    ON 275 SE 2 B 13/12/2005-31/12/2010
    SELF 2 375
    SELF 2 475
    ON SE 175 13/12/2006 AND 31/12/2010 B 3
    SELF 3 375
    SE ON 3 475

    This is my sample data. Here, the data is mirrored with different index columns. INDEX 1 and 2 contains the same combination group. I so need to identify one of the combination double (i.e. INDEX 1 or 2). Anyone can come up with the exact solution?

    Thank you

    I thought it had to do with the order of the INDEX field. The query checks only the value of the previous INDEX value.

    I think I found what the problem was.

    Try this:

    with test_table as
(select 'SUR' NAME, 'SE' NAME_1, '275' VALUE, to_date('13/12/2005','DD/MM/YYYY') START_DATE, to_date('31/12/2010','DD/MM/YYYY') END_DATE, 'B' FLAG, 1 IND from dual union all
select 'SUR', 'SE', '375', null, null, 'A', 1 from dual union all
select 'SUR', 'SE', '475', null, null, 'A', 1 from dual union all
select 'SUR', 'SE', '275', to_date('13/12/2005','DD/MM/YYYY') ,to_date('31/12/2010','DD/MM/YYYY') ,'B', 2 from dual union all
select 'SUR', 'SE', '375', null, null, 'A', 2 from dual union all
select 'SUR', 'SE', '475', null, null, 'A', 2 from dual union all
select 'SUR', 'SE', '175', to_date('13/12/2006','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 3 from dual union all
select 'SUR', 'SE', '375', null, null, 'A', 3 from dual union all
select 'SUR', 'SE', '475', null, null, 'A', 3 from dual union all
select 'SUR', 'SE', 'IPT', to_date('13/12/2005','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 100 from dual union all
select 'SUR', 'SE', '375',null, null, 'A', 100 from dual union all
select 'SUR', 'SE', 'AO', null, null, 'A', 100 from dual union all
select 'SUR', 'SE', 'IPT', to_date('13/12/2005','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 218 from dual union all
select 'SUR', 'SE', '375' ,null, null,'A' ,218 from dual union all
select 'SUR', 'SE', 'AM' ,null, null,'A' ,218 from dual union all
select 'SUR', 'SE', 'IPT' , to_date('13/12/2005','DD/MM/YYYY'), to_date('31/12/2008','DD/MM/YYYY'), 'B', 334 from dual union all
select 'SUR', 'SE', '375' ,null, null,'A', 334 from dual union all
select 'SUR', 'SE', 'AP',null, null, 'A', 334 from dual union all
select 'SUR', 'SE', 'IPT' , to_date('01/01/2009','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 335 from dual union all
select 'SUR', 'SE', '375' ,null, null,'A', 335 from dual union all
select 'SUR', 'SE', 'AP',null, null, 'A', 335 from dual union all
select 'SUR', 'SE', 'IPT' , to_date('13/12/2005','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 336 from dual union all
select 'SUR', 'SE', '375' ,null, null,'A', 336 from dual union all
select 'SUR', 'SE', 'AP',null, null, 'A', 336 from dual)
SELECT name,
       name_1,
       value,
       start_date,
       end_date,
       flag,
       ind,
       MIN(diff_flag) over(PARTITION BY NAME, NAME_1, IND) min_flag
  FROM (SELECT t3.*,
               CASE
                 WHEN lag(VALUE, lag_flag)OVER(ORDER BY IND, start_date, VALUE) != VALUE AND flag = 'A' THEN
                  1
                 WHEN (lag(value, lag_flag)OVER(ORDER BY IND, start_date, VALUE) != value
                    OR lag(start_date, lag_flag) OVER(ORDER BY IND, start_date, VALUE) != start_date
                    OR lag(end_date, lag_flag) OVER(ORDER BY IND, start_date, VALUE) != end_date)
                    AND flag = 'B' THEN
                  1
                 WHEN lag_flag = 0 THEN
                  1
                 ELSE
                  2
                 END diff_flag
          FROM (SELECT t2.*,
                       first_value(lag_count_flag) OVER(PARTITION BY NAME, NAME_1, IND
                                                            ORDER BY NAME, NAME_1, start_date) lag_flag
                  FROM (SELECT t1.*,
                               CASE
                                 WHEN FLAG = 'B' THEN
                                  lag(COUNT, 1, 0)
                                  OVER(ORDER BY IND, start_date, VALUE)
                               END lag_count_flag
                          FROM (SELECT t.*,
                                       COUNT(*) over(PARTITION BY NAME, NAME_1, IND) COUNT,
                                       row_number() over(PARTITION BY NAME, NAME_1, VALUE,
                                                                      START_DATE, END_DATE, FLAG
                                                             ORDER BY IND) row_number
                                  FROM test_table t) t1) t2) t3) t4
 ORDER BY ind,
          start_date,
          VALUE;

    Published by: Manuel Vidigal on Abr 13, 2009 18:18

  • configure separate lines on a DIO port as input or output

    IM using a NOR-DAQmx map (6251) in LabWindows/CVI environment.

    My problem is with the EEPROM reading, but both his (output of 6251) clock and data lines (entrance at 6251) are on the same physical channel (Port1 DIO)

    How to use CVI to configure individual port lines, so that a single line (say Port1.6) is a release and another (say Port1.7) line is an entry.    And therefore not have to keep starting and collapses of the NIDaq read or write operations across the port only once, but just let each line separate running as a read or write until the operation is complete.

    Thank you

    Hi Rob,

    The map of PCI-6251, you can configure different lines on the same port for the inputs and outputs with CVI.  I've attached an example that does what you are asking here: it uses port1, line6 port1, line7 as input and output.

    Also, for others reading this post, more information on this topic are in this post on the forum as well.

    Best regards
    Erik

  • break the values of columns in separate lines

    Hello

    I have a query that returns the values of 4 columns of it. Of this, a column can have many values it contains separated by semocolon (-). The requirement now is if this particular column has more than one value, separated by the semocolon (-), then the query must return each of them separately as a new line and keep the rest, column values as common for each of these values of this colummn.

    For example, select...

    output:
    col1 col2 col3
    Risk of BB IE6 71 of the PACK_PWRMART file. DELETE_POSITION_WO_RISK ($FEEDINSTANCEID); PACK_PWRMART. DELETE_INSTRU_REL_POS_WO_RISK; QC 8401

    COL4
    2010-02-11 09:29:45 December 28, 2010

    Now, col3 has 3 values separated by (;). Therefore, the output of the query
    col1          col2                           col3( now split with 3 values)                                                          col4
71     BB IE6 risk file     PACK_PWRMART.DELETE_POSITION_WO_RISK($FEEDINSTANCEID)        2/11/2010 9:29:45 AM 28-Dec-2010     
72     BB IE6 risk file     PACK_PWRMART.DELETE_INSTRU_REL_POS_WO_RISK            2/11/2010 9:29:45 AM 28-Dec-2010     
73             BB IE6 risk file             QC 8401                                                                                       2/11/2010 9:29:45 AM 28-Dec-2010
    The solution that I thought:

    I don't know if this can be achieved in a single SQL statement, so I thought I should write a block of code that will use the collection separate each of the value of this column and use some sort of record of object to insert the entire line in it 3 times (or the number of times as much as the values in this column) , but without success.

    Something like this:
    declare
type feed_name is table of varchar2(4000);--feed_static.feed_description% type INDEX BY PLS_INTEGER;
feed_nm feed_name;
param_val feed_name;
dat feed_name;
feed_desc feed_name;
str number;
str1 varchar2(1000);
begin
select feed_description as "Feed Name" ,
       param_value as "Post_Proc Prarameter",
       '28-Dec-2010' as "COB date",
       ft.feed_type_description as "Feed Type"    
BULK COLLECT INTO feed_nm,param_val,dat,feed_desc
from feed_static fs, feed_parameter fp, feed_type ft 
where fs.feed_id =fp.feed_id
and fs.feed_type_id = ft.feed_type_id
and fs.feed_type_id not in (4,15,16,25)
and fp.param_name  = 'postproc'
and fp.close_action_id is null
and fs.feed_description in ('BB 0J0 risk file')--,'BB 1J1 risk file')
order by  fs.feed_type_id,feed_description;
FOR i IN 1..param_val.count
loop
    select length((param_val(i))) - length(replace(param_val(i),';')) into str from dual;
           dbms_output.put_line(str); 
           for j in 1..str
               loop
                    SELECT SUBSTR(param_val(i), 1 ,INSTR(param_val(i), ';', 1, j)-1) into str1 FROM dual;
                    dbms_output.put_line(str1); 
                    str1:=' ';
               end loop;
end loop;    
end;
    But the "dbms_output.put_line (str1); does not give me o/p as required except the first value (assume thr are the 3 values of the column).
    Also I'm not sure of what I'm trying to do is in the right direction or not.

    I have not used any RECORDING still to poulate values separated again (I'm not sure about hoe to use)

    Cam anyone help me please with this code.

    Rgds,
    Aashish

    Try this:

    select feed_description as "Feed Name" ,
       param_value as "Post_Proc Prarameter",
       '28-Dec-2010' as "COB date",
       --ft.feed_type_description as "Feed Type" ,
       regexp_substr( ft.feed_type_description,'[^;]+',1,rown.seq)
from feed_static fs, feed_parameter fp, feed_type ft, (SELECT LEVEL seq FROM DUAL
                    CONNECT BY LEVEL<=max(length(ft.feed_type_description)- length(replace(ft.feed_type_description,';'))))rown
where fs.feed_id =fp.feed_id
and fs.feed_type_id = ft.feed_type_id
and fs.feed_type_id not in (4,15,16,25)
and fp.param_name  = 'postproc'
AND rown.seq<=(length(ft.feed_type_description)- length(replace(ft.feed_type_description,';')))
and fp.close_action_id is null
and fs.feed_description in ('BB 0J0 risk file')--,'BB 1J1 risk file')
order by  fs.feed_type_id,feed_description;

    regexp_count started in 11g. It counts the number of models in a particular string. I replaced by length - length (repalce).
    You can replace the word 'max (length (ft.feed_type_description) - length (replace(ft.feed_type_description,';'))))' with 10 or 15, i.e. the maximum number of semicolons in the chain

  • Separate lines TextFrame

    Hello

    I need to get the position of all the texts of an Illustrator document.

    It is easy enough for simple lines, because I have the position of TextFrame

    For each tf in docRef.TextFrames

    position = tf. Position

    Next

    But if the TextFrame has several lines, I don't really know how to do.

    For each tf in docRef.TextFrames

    For each line in tf. Lines ' line is a TextRange

    ????

    Next

    Next

    It is not the 'Position' property for TextRange objects...

    I wonder if the best way would be to split/demerger lines of a TextRange in TextRange separate so I would be able to know the position of them.

    But is it possible to do? How? or is there another solution?

    I saw on the Internet a script to merge separate TextFrame into one, but I want to do the opposite...

    Here is the link to the merger: http://InDesignSecrets.com/merging-multiple-text-frames-into-one.php

    Help :-)

    Hi John, there is a script to split multi-line management related management of single line, made by Wundes related texts. But it is not necessary to do...

    in a 3 line textFrame

    -position of the 1st line = position textFrame

    -position of the line 2 = position textFrame - leader

    -position of the line 3 = position textFrame - Leading * 2

    in the following shot of VBA I did split the text and wrote the position of the lines on individual frames, but you can get the position directly without breaking it up

    Set txtFrame = Idoc.Selection (0)

    txtLeading = txtFrame.Story.TextRange.CharacterAttributes.Leading

    For i = 1 To txtFrame.Lines.Count

    Txtline = Idoc.TextFrames.Add set

    txtFrame.Lines (i). Txtline duplicate, 1

    txtline. Position = txtFrame.Position

    txtline. Txtline = top. Top - txtLeading * (i - 1)

    txtline. Left = txtFrame.Left - txtFrame.Width

    txtline. Content = "Y ="& txtline. ". Back to top

    Next

  • the legends transparencies and extra line spacing

    When I use transparent captions, the published version sometimes shows some additional space between the first and second lines. The remaining lines are spaced, but the first has too much space, which seems strange. How that disappears?

    Lae

    I just had this same problem. You, by chance, to do a copy & paste in the text of the legend? That's what I did with exactly the result that you are experiencing. For purposes of marketing or flow, I couldn't change my font, so for me it wasn't the issue. I did, however, retyping all the legend and that solved my problem. Maybe it will work for you as well.

    Good luck
    B

  • How to write textfield that can change the line after a certain period of time?

    Hi all

    I would like to create a field that can take an entry and after some specified width, can change line.

    Thank you best regards &,.

    Narendra

    See this Article.

    http://NA.BlackBerry.com/eng/devjournals/resources/journals/jul_2005/creating_textbox_field.jsp

  • Duplicated in Lov instead separate lines

    Hi, I m using vo in lov and I put sound where clause dynamically, then lov watch records in double incorrect 2, instead of 2 separate records must come to the result that I get vo.getQuery () console application and run into a toad. Jdev 11.1.1.6.0 can any body tell me what is the problem? Cordially Tunio

    And when you're looking for explicitly on the dialog search LOV (by pressing the search button), is there any diff?

    And that's the main attributes are really different?

Maybe you are looking for

  • I want to delete an inactive Apple account

    I have an I phone and a laptop asking yet old Apple ID. I have more access to the electronic ID/mail old, and it is inactive. I have another valid Apple id, but keep getting requests for the old id

  • Envy of HP dv7 i7: cooling system

    An update of the system will delete all my IE programs Office, Adobe suite etc.? When it refers to "files", it's that only documents, photos, videos, etc?

  • Spectrum x 360 changeable 13: spectrum x 360 cannot move to Win 10

    For a few months I waited for my notification of 8.1 set to win 10. When I click the upgrade icon (Windows flag), all I see is the screen saying "We will validate Windows 10 for your PC" and offers a button "OK, tell me when you're ready." It follows

  • Removes the component of software without NI MAX

    Is there a way to remove a software component on a real-time target without using MAX or the configuration of the system API (and not all format)? The web-based software management feature only seems to list the installed components, does not allow c

  • Definition of scan

    Hello I have trouble with the definition of the option "scan of the computer. It's whats written in the support: and that's what I see in my computer (no computer scan to option), please how can I fix it?