Definition of scan

Similar Questions

• OfficeJet pro 8600: Wireless officejet pro 8600 macbook air scanning

  Hello

  I have a macbook air running on Yosemite that I try to get my Officejet pro 8600 scanner to the computer.

  Despite installation, uninstall, reinstall and it several times, I can't make it work.

  Can very frstrated, anyone help?

  Hi @Benking116 and welcome to the Forums of HP

  I'm sorry to hear you had problems of scanning your Officejet 8600 to your Mac in OS X 10.10, but I'm absolutely going to do my best to help!

  If you open HP Scan on the computer, you are able to scan from there without problem (please refer to this document scan from OS X with HP full software functionality to see how to open the HP scanning software)? If so, I think you just have to activate the scanning to computer in the HP software. Please take a look at this Re: definition of Scan post and he will inform where to go in the HP utility choose Activate Scan to computer. After that is done, are you able to the printer to the computer?

  If you are UNABLE to analyze through the HP scanning software, the issue could be just communication itself. In this case, try the steps in this document to the printer is not maintaining the wireless connection .

  Let me know how things are going for you

• Change the configuration of DNS host file SCAN

  We have a 2-node rac configuration on our machine. When it was created first, use host file to set the IP name and scan scan because our DNS is not yet ready.

  The DNS is now ready, and when we do nslookup, we are able to see the name of scan & IP.

  How can we migrate the scan configuration to use DNS? Will be just comment on our values of host works file?

  Thank you

  In the case of linux, it is necessary to:

  1. set your DNS servers in/etc/resolve or the NETWORK card configuration file.

  2. check name resolution.

  3. definitions of SCAN comment in the hosts file.

• OfficeJet J3680, cannot log on to the appliance

  OfficeJet J3680, connected by USB to Mac Mini with OSX 10.9.5.

  It worked very well for a long time, but now scanning is broken.  Print still works fine.  All features (printing and scanning) works fine if I connect the USB cable to my MacBook Pro with the same operating system.

  Specifically, I get the error message "unable to log on to the device.  This happens for all types of access attempt (preview, Capture of Image, system preferences > printers and Scanners > Scanner > Scanner open...)

  I tried different solutions, up to and including a complete uninstall and reinstall, with restarting the computer and the printer.

  Update Software Apple (in the App Store) indicates that I have successfully installed HP Printer Software Update Version 3.0.

  Printing SYSTEM has been reset several times.

  Clues?  It's super frustrating that it works on my laptop, but not the desktop computer (where there is meant to be fixed.)

  Hi James!

  Thanks for getting back to me, and Yes you are right and forgive dominant that the printer works with other devices.

  Here are a few suggestions more:

  1. Remove the first printer driver by following these steps: Sunshyn2005: FRUSTRATED! HP 6700 scanning feature does not not with my MAC
  2. Complete a manual uninstall then: Sunshyn2005: Re: definition of Scan
  3. Reinstall the driver v3.0: v3.0 of HP for OS X printer drivers
  4. If it still does not work, try to create another user account

  Hope you enjoy your Monday

• automatic update Windows defender

  Windows Update is in my case to "check and inform", because I usually take a backup of the system disk before applying updates.
  However, the windows defender updates happen every day, and I believe that they cannot break my computer.
  I really wish Microsoft to separate the two updates: enabling windows Defender Update automatically, all while my preference of "check and inform" as regards to windows update in general.
  Why should he go through the update of windows defender windows? Cannot make its own updates like any other antivirus on the market?

  Hi harrymc,.

  Thanks for posting your request on the Microsoft Answers site.

  Windows and the programs that ship with Windows, such as Internet Explorer and Windows Defender can be updated automatically by turning on automatic updating.  You can configure Windows to automatically install important updates and recommended updates. Optional updates are not downloaded or installed automatically. With the parameters value updates Windows Update to update, but let me choose whether to download and install, you can set Windows Defender to check the new definitions before a Windows Defender analyzes programmed.

  To automatically check new definitions before Windows Defender at the request of scans (recommended)

  1. Click to open Windows Defender in Control Panel > Windows Defender

  2. click on tools and then click Options.

  3. under automatic scanning, make sure the automatically scan my computer (recommended) check box is enabled.

  4 check for updated definitions before scanning them to check, and then click Save. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To manually check the new definitions for Windows Defender:

  1. Click here to open Windows Defender.

  2. click on the arrow next to the help button and then click Find updates.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For reference, you can also check the following links for more information. Windows Defender and Windows Update settings.

  http://www.Microsoft.com/Windows/Windows-Vista/features/Defender.aspx

  http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

  Please let us know if we can provide any additional information or assistance.

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Explorer.exe is not running after logon

  XP Home SP3, Microsoft updates current running.  Also running avast! 6 free 3.54 Sandboxie, Windows Defender, COMODO Firewall (free) Malwarebytes Anti-Malware free, SUPERAntispyware Free Edition, PC Tools ThreatFire.  Firefox 4.0.1 and also installed IE8.

  Only three of these programs are running real time: avast!, COMODO, ThreatFire and Sandboxie when running a browser.

  Updated definition files scanning shows the system to be clean.  System runs very quickly and smoothly.

  Problem: Explorer.exe will not start after login.  Desktop is missing, taskbar, tray system, clock, start button and desktop icons and system stalls.  Check the Task Manager shows explorer.exe has not been loaded.  The first couple of times this happened it, CTRL + ALT + DELETE is the Task Manager, and I chose restart from, even when you are connected, and then explorer.exe should boot and load.

  I have not checked yet to see, if and when this condition occurs again, if explorer.exe is going to load by clicking New Task Manager tasks.

  Safe mode and running last last known good configuration worked the last time.

  What should I look for in the registry?

  mchain

  Please let us know.

  John

• Programs and browser suddenly fail on Xp.

  My problem on my laptop that works under Xp sp3. There are several times when I use Chrome, Firefox or IE it looks suddenly "shockwave flash failed" and not related to the browser together programs would crash or say "error please insert an installation disc," sometimes even my Norton AntiVirus just pop up and say 'antivirus has been extinguished', but after a system restart everything seems back to normal not until he is suddenly up like all programs has failed. I always update my virus definitions and scan my laptop but it is clean. The laptop does not slow down or make any what else bad is just a matter sometimes of programs all of a sudden I think it has to do with the problem of the shock wave, failure can be. I was wondering what is the problem and how to fix it. Thank you

  You cannot have two ANTIVIRUS at the same time, or need more running real-time antivirus, malwarebytes, free version do you use on a scanner at the request. I scan a quick scan whenever I'm on the internet, takes a few minutes and every week or if I run a full scan.

  AVG is also prone problem, but if it works for you use it.

  If you have any other questions. :)

• SUPERantispyware

  I won't really care to ask what it does but it conflict with what whatever and you recommend it?

  All these programs are reasonable detection and excellent removal however they all come upward a bit short
  competing reside (permanently in memory) in my opinion. So I put them to work as on-demand
  scanners only and get the benefits without the negatives.

  SUPERAntiSpyware is a fine program however she has problems with other similar programs like
  IE in Vista and Windows 7. The best way to run it is to disable the functions of resident using AutoRuns and
  then use it as a scanner at the request on don't forget to update its definitions before scanning.

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/06303a9a-04d1-43a8-A1E9-1ef30025f218

  SpyBot has similar problems:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/a3f86d5e-AD51-4647-9c3c-c88b3fe119d1

  Remember how I suggested to define AdAware

  http://social.answers.Microsoft.com/forums/en-IE/vistasecurity/thread/e179a3c2-3b41-4fc6-B542-6ecba521c33d

  One of the reasons I like Prevx in resident mode is fast, uses little memory and system resources and therefore
  until now it has not caused a single hiccup on systems that I know not.
  Rob - bicycle - Mark Twain said it is good.

• Cannot remove trojan apparent - continues to add registry entries

  I am working on a Dell 2400 that was not (until recently) updated or properly protected with a firewall / virus protection.

  I tried the copy of the demo of Norton Antivirus and it had detected I think:
  Trojan.fakeavalert and another who was virtumundo trojan.vundo or Trojan (I forgot the name)

  Recently, I uninstalled NAV installed the following:

  ZoneAlarm Internet Security (and all updated)
  AdAware 2008 - free version (and it's also up-to-date)

  The two ZoneAlarm & AdAware run fairly clean except for the cookies, etc. (low priority stuff)

  My problem right now is that there is something that is adding entries to the registry (even in safe mode), and it causes many web pages to pop up in IE7 or FireFox.
  The entries that I find in the registry are:
  \HKLM\software\microsoft\windws\currentversion\run
  Rundll32.exe "c:\windows\system32\rulufutu.dll",a"
  Rundll32.exe "c:\windows\system32\piyudijo.dll",a"
  Rundll32.exe "c:\windows\system32\kitehuvu.dll",a"

  When I delete these entries (even in safe mode), they are added in a few seconds.

  Try scans with both of these programs in the following order:

  Please disable other security software that may cause conflicts with the scans. (Remember to enable it later.)

  Instructions on how to do that are HERE.

  Please download for your desktop Malwarebytes' Anti-Malware here or here

  Double-click on mbam - setup.exe to install the application.

  • Make sure that a check mark is placed next to the Update Malwarebytes' Anti-Malware and launch of Malwarebytes' Anti-Malware, and then click Finish.
  • If an update is found, it will download and install the latest version.
  • Once the program has loaded, select "perform quick scan", then click scan.
  • The analysis may take some time at the end, so please be patient.
  • When the scan is complete, click OK, and then view the results to view the results.
  • Make sure that everything is checked
    Click Remove selected.
  • End of disinfection, a log will open in Notepad and you may be prompted to restart. (See additional Note)
  • The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.

  Additional notes:
  If MBAM finds a file that is difficult to remove, you will be presented with 1 of 2 prompt, click OK to either and let MBAM proceed with the disinfection, if asked to restart the computer, you can do so immediately.
  * If you cannot download or install MBAM on your computer, see if you can use the computer to a friend or family member to download MBAM. Use this link to update here to manually download the update. Once downloaded, rename the Setup file "mbam - setup.exe" to something like "catchjunk.exe". Copy the installation file and the update on a CD or a flash drive file. Transfer the file on the infected computer. Install the "catchjunk.exe" file, and then run the update so that you get the current definitions. After that, run a full scan of the system and select to have the program REMOVE everything it finds.

  * If you need to re - install MBAM but problem by reinstalling, try using the MBAM Cleanup utility by downloading from http://www.malwarebytes.org/mbam-clean.exe

  Download and scan with Super Anti-Spyware free for individuals. It is available HERE:
  * Double-click on SUPERAntiSypware.exe and use the default settings for the installation.
  * An icon will be created on your desktop. Double-click this icon to start the program.
  * If it is asked to update the program definitions, click "Yes." If this isn't the case, update the definitions before scanning them by selecting 'Check for Updates. (If you have problems downloading updates, download and unzip them from heremanually.)
  * Under "Configuration and preferences, click Preferences .
  * Click the scanning control tab.
  * Under Scanner Options make sure the following is checked (leave all other non controlled):

  Close browsers before scanning.
  Search the rejected.
  Terminate memory threats before quarantining.

  * Click on the "Close" button to leave the control center screen.
  * Back on the main screen, under "Scan for harmful software" click Scan your computer.
  * On the left, make sure you check C:\Fixed drive.
  * On the right, under "Complete Scan", choose perform complete scan.
  * Click 'Next' to start the scan. Please be patient while it scans your computer.
  * Once the scan is finished, a Scan summary box will appear with potentially dangerous elements that have been detected. Click on 'OK '.
  * Make sure that everything is checked, and click "next".
  * A notification will appear this "quarantine and removal is complete. Click 'OK' and then click on the 'Finish' button to return to the main menu.
  * If it is requested if you want to restart, click 'yes '.

  If that does not solve the problem, maybe it would be good according to a journal of control on the malware removal Forum.

  Be sure to read the instructions at the top of the forum.

• System restore lost, don't visit a support site

  I was recently looking at google and you have clicked on a number of Web sites (open in the window of the tab), and then in about 30 seconds my computer beginner and I knew I had a virus. So I'm going to the my system restore and try to restore but all my restore points disappear up until this day.

  Well I get pop up windows and when I googled some sites it will charge the support page.

  Is there a way to retrieve my restore points? Any help would be greatly appreciated.

  The first step would be to get rid of all that is the source of the problem.

  Try scans with both of these programs in the following order:

  Please disable other security software that may cause conflicts with the scans.

  Instructions on how to do that are HERE.

  Please download for your desktop Malwarebytes' Anti-Malware here or here

  Double-click on mbam - setup.exe to install the application.

  • Make sure that a check mark is placed next to the Update Malwarebytes' Anti-Malware and launch of Malwarebytes' Anti-Malware, and then click Finish.
  • If an update is found, it will download and install the latest version.
  • Once the program has loaded, select "perform quick scan", then click scan.
  • The analysis may take some time at the end, so please be patient.
  • When the scan is complete, click OK, and then view the results to view the results.
  • Make sure that everything is checked
    Click Remove selected.
  • End of disinfection, a log will open in Notepad and you may be prompted to restart. (See additional Note)
  • The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.

  Additional notes:
  If MBAM finds a file that is difficult to remove, you will be presented with 1 of 2 prompt, click OK to either and let MBAM proceed with the disinfection, if asked to restart the computer, you can do so immediately.
  * If you cannot download or install MBAM on your computer, see if you can use the computer to a friend or family member to download MBAM. Use this link to update here to manually download the update. Once downloaded, rename the Setup file "mbam - setup.exe" to something like "catchjunk.exe". Copy the installation file and the update on a CD or a flash drive file. Transfer the file on the infected computer. Install the "catchjunk.exe" file, and then run the update so that you get the current definitions. After that, run a full scan of the system and select to have the program REMOVE everything it finds.

  Download and scan with Super Anti-Spyware free for individuals. It is available HERE:
  * Double-click on SUPERAntiSypware.exe and use the default settings for the installation.
  * An icon will be created on your desktop. Double-click this icon to start the program.
  * If it is asked to update the program definitions, click "Yes." If this isn't the case, update the definitions before scanning them by selecting 'Check for Updates. (If you have problems downloading updates, download and unzip them from heremanually.)
  * Under "Configuration and preferences, click Preferences .
  * Click the scanning control tab.
  * Under Scanner Options make sure the following is checked (leave all other non controlled):

  Close browsers before scanning.
  Search the rejected.
  Terminate memory threats before quarantining.

  * Click on the "Close" button to leave the control center screen.
  * Back on the main screen, under "Scan for harmful software" click Scan your computer.
  * On the left, make sure you check C:\Fixed drive.
  * On the right, under "Complete Scan", choose perform complete scan.
  * Click 'Next' to start the scan. Please be patient while it scans your computer.
  * Once the scan is finished, a Scan summary box will appear with potentially dangerous elements that have been detected. Click on 'OK '.
  * Make sure that everything is checked, and click "next".
  * A notification will appear this "quarantine and removal is complete. Click 'OK' and then click on the 'Finish' button to return to the main menu.
  * If it is requested if you want to restart, click 'yes '.

  Let us know if that helps.

• Is there a way to disable the automatic creation of a restore point for Windows Defender, when he made an update of definition of the window? It is for the definitions of update itself, not the option 'restore point before the scan' can I disable with a

  I want to keep only a single copy of a System Restore Point that I created mine so I know when I did and why I did it.

  With Windows Defender, I noticed that a new restore point is created whenever there is an update of Windows definitions, if I use the method of automatic or manual update.  I found that when I opened the system restore and found a new copy with description: "Installation: Windows Update.  In the history of Windows Defender, I noticed that the time corresponded to when the update the definitions file.

  I unchecked the box under Windows Defender does not create a restore point before a scan of the system.  I tried the Google search to find answers and can't seem to find someone mentioning this.  Also MS sites does not seem to explain on the restores automatic system during the update of the definitions.

  I'm also curious whether Windows Essentials will have the same problem that I am planning to use Essentials instead of Defender and thus get rid of Avast.

  Hi Dudeus,

  Yes, it is not possible to disable your system being created before windows updates restore.

  Bindu S - Microsoft Support

• There is an error produced so that the definition of scanner when scanning through Windows photo gallery properties

  Original title: scanner MEM48U does not not under vista

  Hi, I use MEM48U scanner under xp. The scanner even when it is installed with vista installed and updated the driver. But when tried to browse the Windows Photo Gallery, it is said that a "error occurred when setting the scanner properties. If another program uses Pl waiting and let it fill. »

  Hello components,

  I couldn't even Memorex MEM48U on the site Web of Memorex. It must be abandoned. On other 3rd party sites, I found Windows XP and earlier operating systems drivers.
  If you try to use on a Windows Vista system, it may not work because of the lack of a Windows Vista driver.

  The Windows Vista Compatibility Center does not list this product compatible with Windows Vista. You can try to install in compatibility mode with Windows XP drivers and see if that helps.

  Run the installer in compatibility mode:

  1 right click on the file icon installation.
  2. click on properties > compatibility.
  3. Select the compatibility mode for Windows XP.
  4. click on OK.
  5. run the installation program.

  After installation, run the program in Windows XP compatibility mode by doing the same thing with the installed program.

  I hope this helps.

  Marilyn

• Sharing Photos to iCloud for Windows: can I include PDF scans of Readdle Scanner Pro?  I don't only see MOV and JPG images.

  I have iPhone, iPad, and a PC with Windows 10.  I find that I can download photos and other images to iCloud.  But miss me scans PDF documents that I made using Readdle Scanner Pro.  Can I get these too?

  Hi there, Bill-to-ipad!

  Thank you for using communities Support from Apple! From what you have posted, I understand you want to download the PDF files that you have created. I can definitely see the convenience which provides for the establishment, and I'd be happy to help you with information on how you can do it.

  iCloud drive will allow you to share documents, such as PDFs, in all of your devices. The following article will help you get iCloud drive configured on your iOS devices and your Windows computer.

  Implement the iCloud Drive on all of your devices - Apple Support

  I would also check the following article, the link that will give you some more information about iCloud drive and it can do for you.

  iCloud Drive FAQ

  See you soon!

• HP MFP M277 dw: scanned image is not horizontal

  Hello

  I have problems with scanning.

  The scanned image is not right, not horizontal, the image / lines slightly tilting. The right of a line that is slightly below the line on the left. Looks like the book was a little twisted, but it's not. The left and right margins are straight and vertical, but the lines is tilted slightly.

  This occurs regardless whether I put the paper on the glass or using the paper feeder.

  My MFP is almost new, and this problem has happened all the time.

  / Paul

  @Paul_Sund

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you have not already done so, try setting "Calibrate" to help improve performance.

  The User Guideexplains the procedure on Page 121

  Calibrate the product in order to harmonize colors
  Calibration is a function of product that optimizes print quality.
  Follow these steps to solve the problems of quality of printing such as misaligned color, shadows, fuzzy graphics or other color print quality problems.
  1. on the product control panel, press the Setup button.

  2. open the following menus:
  ● System Configuration
  ● print quality
  Color calibration ●
  ● Calibrate now

  3. a calibration message appears on the control panel of the product. The calibration process takes a few minutes to complete. Do not turn off the product until the end of the calibration process.

  4 wait until the product is calibrated and then try to print again.

  

  If nothing helps, I suggest that you contact HP Support.

  Explain the problem and ask for options / help.

  HP Contact Information - sales, Technical Support, other Contacts - USA / Canada

  Fill out the form to receive the case number and Contact information

  Contact HP support - USA-

  Contact HP - including UK information

  HP technical support / Service delivery - some English Speaking countries

  HP global support

  Warranty check

  HP customer support - product warranty check

  Plans of optional guarantees:

  Enter your product number in the screen to view the different warranty plans available for this system:

  Care Pack Central

  Definitions (file may be slow to load in Firefox - Edge is faster...):

  Definitions of Care Pack Services

  HP Services to consumers (Service purchase information)

  1-866-724-8600

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• HP Photosmart 7520e: HP 7520-e not scanning to E-mail more

  I had my Photosmart 7520e for over a year and have been able to perform all the activities about it without problem. However, the other day I found that I could scan is no longer e-mail. I tried to unplug the router and the printer and reconnect, as has been suggested but cela did not work. I selected manual DNS server and entered for the preferred manual DNS Server 8.8.8.8 and 8.8.4.4 for the other DNS server, but it does not work either.

  When I enter the IP address of my printer I can see that I'm connected to the network and ePrint. everything seems to work as it should. But, when I click on Scan to Email I always get the same message on the printer screen: Server connection error. Unable to connect to Web Services. Confirm access to the Internet, and then try again.

  Hi @ronalds173,

  Thanks for getting back to me.

  I have extra information that might help.

  1. Restore the default settings of your printer directly affect the printing on the computer software, however, to re-establish a wireless connection, your printer may be assigned to a different IP address than what you had before.  The significance of this is that you will have to do some tricks with your configuration on the computer to keep print smoothly. Click the icon of your printer on the desktop of your computer after you do the reset - if it loads the software HP Printer Wizard successfully, you are ready to go and that he should still be able to print from PC.  If you get a pop up that says "Connect a new printer", click that and the printer software automatically detects your printer on the wireless network.  The most pessimistic scenario (very unlikely) and if you lose completely any ability to print, click here to install the HP print and Scan Doctor for Windows.

  2. your printer wireless Direct name and default password - these will remain the same no matter what happens.  The SSID (which is the name of your wireless network) will not be affected by the reset.

  3. you will definitely enter DNS information I posted earlier under section of configuring DNS address.  It will be be switched to "auto". Click to set as "Manual" and enter the numbers as shown.  You should not need to access the IPv6 section for this step.

  4. I recommend to leave this setting alone as the default values are already being optimal for any type of impression you make.

  If you need information more don't be shy to answer.  Thanks again for posting and have a good.

  Kind regards