TextFiled defined area AutoFill
I created textareas in Illustrator with fill colors.
I want to do this automatically 5px 2px padding up and down and left and right padding.
I know that this is possible in Indesign, but I need the same function in Illustrator to be used as a Smartobject in Photoshop.
Joint a screenshot of what I am after.
Thank you
Mikael
A pile of appearnace will take care of it
- Text
- Set fill None - this remove the fill at the character level
- Flyout appearance > add the fill color of cyan text (this adds to the level of the type)
- Flyout appearance > add the fill color for the purple background and move under the text fill color
- Add effect > convert to shape > rectangle over purple filling
- Add effect > path > describe the object, move to where indicated (this helps Center the text described, no such text designed cast iron size)
I want to delete all fills to the level of the character. Although the level of the type replace that, I find it cleaner and less confusing for future changes.
Tags: Illustrator
Similar Questions
-
Where is the 'Zone' or 'help ' defined area in WebHelp?
Hello
I'm new in Robohelp Server 9 and I have what I hope is a fairly "simple" question I'm going to build an environment of Robohelp 9 for a client in which they use Webhelp and Webhelp Pro to publish. With this new environment, they would be first publication only through Webhelp. My question is when they broadcast WebHelp Pro, they can point to the 'help' area where they want their published project. In WebHelp, they do not get an option to set this field 'help '. I have correctly installed Robohelp 9 on the server and created a context for this user to publish. The problem is now when they attempt to publish, they have the opportunity to provide the name of the server in which they publish, but there is nowhere to indicate the location or 'Zone' created to publish. Once more, they try to publish via WebHelp.
Thanks for your time,
VUJ
WebHelp is not designed to work with RoboHelp Server, so it will not have the possibility to define an area. Why do they want to WebHelp, turn on the server rather than WebHelp Prol?
You say that you have installed RoboHelp 9 on the server. I hope you mean that you have installed RoboHelp Server on the server.
WebHelp can be on the same server as RoboHelp Server, but it cannot be published to the latter.
See www.grainge.org for creating tips and RoboHelp
-
form name and email are autofilled. Cannot remove
I use the latest firefox 4/Vista... .see below
When I go to some sites, the user name and the e-mail I used before a loooong time ago on another site automatically appear in the name field and email (in the comment section).
I've never visited these sites before and still less posted something on them or used the e-mail/logon in a different way. There is no cookies associated with these sites in my cookies.
I tried turnign off remember search and form history
I tried to delete and move delete
whenever I return to these areas of the site, same thing.
I don't use any plugin autoform.I think that extra detective work may be necessary. Here's a thought. Some sites share comments, reviews and investigations. If you right-click close the form with the unwanted information in it, is there a 'this framework' in the context menu? If so, which follow to display the frame information see the area of the true source. You may need to clear cookies from this domain.
-
Is there a way to insert a form field in an AcroForm which allow users of Reader to browse and insert an image in this form field?
I know that LiveCycle can do, but I need to do using an AcroForm. Or maybe there is a third party plug-in that can be used in an AcroForm to do this?
No, you don't need 11 Acrobat to create a form that uses this method, but your Reader users will have to upgrade. I don't see that they have yet to announce the date output to drive, but in the past, it was usually in about a month of the announcement.
-
Add to keychain but no AutoFill
I want to store all of my passwords with Keychain Access iCloud, but I don't want some passwords to autofill. For example, I don't want my user name and password for Auto-filling for my bank accounts - I always feel like typing in manually. However, I still want these passwords to be stored safely in Keychain Access, in which case I forgot. What is the best procedure to achieve this? Currently, all passwords stored in Keychain Access are AutoFill in Safari do anything. If I delete a specific set of keys and manually type in my name of user and password in Safari and then select never "for this site" when you are prompted to save the password, then the password is not stored. All I want is to store the passwords without AutoFill in Safari them! Thanks in advance!
Hi chrisnatrop,
I understand that you want to keep your important passwords in haberdashery, but you don't want them to be autofilled using Safari. You can set the right to auto-fill your Safari app settings. Here is a great link that can help you with fixing Autofill to work exactly how you want that it to. Safari 9 (El Capitan): use AutoFill to enter contact information, passwords and more
Change AutoComplete settings:
Choose Safari > Preferences, and then click AutoFill.
To enable or disable AutoFill, select the information you want to include in the auto-complete, uncheck the rest.
To change or remove the information AutoFill, click on Edit next to the information you want to edit or delete.
Important: Safari auto your information to anyone who uses your Mac with your user login. It also auto your information to anyone who uses your devices if these devices and your Mac have iCloud Keychain set in place.
Please use the Apple Support communities to post your question. These steps are just what to do the job.
Have a great day.
-
How do you define boundries when entering text?
I'm using Elements 5.0. Is it possible to limit the text when entering in a defined area. Can't seem to find anything like a bounding box that prevents 'leaks' on the side/s of the image. Nothing compares to the margins in word for example?
Thanks for any help!
What type of paragraph?
With the text tool selected, draw on a paragraph box as well as the text are not going outside the bounding box.
http://www.Dummies.com/how-to/content/create-paragraph-type-in-Photoshop-elements-10.html
-
How to copy a line and the textFormat of textField
the example of my problem is:
I have 2 textFiled there are:
1. myTextFied (to store the original text)
2 displayText (to show a line of original text)
I have try this:
myTextField.htmlText = "< B > THIS IS A TEXT LINE 1 < /B > \n ' +.
' < I > This IS a LINE of TEXT 2 < /I > \n "+
' < U > This IS a LINE of TEXT 3 < /U > ';
myTextField is narrow and I set myTextField.wordWrap = true;
If the result of myTextField screen like this:
It IS a TE XT
LINE 1
This IS a TEXT
LINE 2
This IS a TEXT
LINE 3
and I use displayText to get the text of line 2 and line 3 of myTextField:
so I try this:
displayText.htmlText = myTextField.getLineText (1);
displayText.htmlText += myTextField.getLineText (2);
but the result of displayText like this:
LINE 1, there IS a TEXT
It is not even the original textFormat.
I want it to appear like this
LINE 1
THIS IS A TEXT
How do I know this. Guy you can please help me!
Thank you
and sorry for my English.
After you added the text in text, you can get a line format in myTextField, and then define the respective displayText:
FMT var = myTextField.getTextFormat (lineStartIndex, lineEndIndex);
displayText.setTextFormat (fmt, start, end);
-
Cross compiling Qt on windows?
Hello
I managed to install Qt and the NDK on linux (a virtual machine, in fact), and I have already created an application to work. Wiki said it is possible to crosscompile Qt for qnx in Windows (it's my main development plataform, and copy the project whenever I want to test in the playbook is a PITA ) but I can't do because the compiler says a lot of #define are missing and fix causes other errors. I tried with cygwin and mingw with no luck.
Any idea? Has anyone able to do? All documentation miss me?
Seems there is something that needs fixing on Windows. Here's a recent Twitter conversation with Eduardo Pelegrí response, the guy from open source to the RIM:
-
By selecting the part of a picture in paint
When I open a picture in Paint in Windows 7, there is a small white square "handles", bottom, right and the lower right corner. I can use these to crop the picture from the bottom and right sides, but there is no squares at the top and to the left for some reason any. Why are these squares on the top and left sides? What is the point of them only being down and to the right? If photos open in paint with these grips on all sides and corners, it would make cropping extremely simple, since you have not all first select an area, you just move the margins to where you want the border of the picture to be.
So if I want to crop from the top or left, I opened the with the rectangular selection tool select and draw a rectangle around the area I want to keep. This works very well for simple cropping where the location of the agricultural frontier of dotted line is not critical. The defined area that results from cutting is described with a line dotted with the same white square "handles" on the sides and the corners, but this time, they are on all sides and corners, as it should. The problem is, once you release the button of the mouse and the harvest dotted area is defined, you can not adjust the crop box by entering one of the white squares and dragging the dotted line without DISTORTING the content within the cropped area. Why would you do THAT? I thought that these handles were there, so you can just move the initial harvest defined by the tool border select.
Does anyone know how to accurately adjust the selected area in a photo?
I have to admit that I don't know the details of the use of paint, but you could download IrfanView, which is free, able to view a wide variety of image format files, converts between these formats of image files and cultures of the images in the way you describe how you think it should work.
It is in IrfanView, you set the crop area by dragging on the area and can then adjust by moving the up, down, left or right (not the corners). The image in the collection area does not distort.
-
Hello
I use TextStyleDefinition in every QML to set the style of the labels that I use.
The problem is that I want to use these TextStyleDefinition in several QML, I want to reuse them because these styles I'm defining are used throughout the application. I tried to create a just QML for TextStyles but I can't seem to work with attachedObjects.
How can I achieve this? Basically, I want to create TextStyles which can be used in each QML (Pages or sheets).
Thank you so much
Concerning
Use the global object of Qt:
onCreationCompleted: {}
Qt.myTextStyle = myTextStyle
}
attachedObject:]
{TextStyleDefinition}
ID: myTextStyle
}
]
-
Hello
I'm get inter vlan routing to work on a 300-24 ports switch DF. I have a network of business existing on 192.168.111.0 and want to create a vlan on 192.168.1.1 which can talk to 192.168.111.0. I activated the layer 3 routing on the switch through the console and also provided ip routing commands. I have the following VIRTUAL networks:
Vlan1 - default 192.168.111.0
VLAN2 - 192.168.1.0
I turned on DNS and provided my two servers DNS 192.168.111.82 & 192.168.111.212.
I updated the VLAN1 interface 192.168.111.217 and VLAN2 interface 192.168.1.1.
The FE1 - FE15 ports are access ports and assigned to VLAN1 (unidentified)
FE16 - FE24 ports are access ports and assigned to VLAN2 (unidentified)
I put a default route for the switch to 0.0.0.0 0.0.0.0 192.168.111.254 (router Draytek 2600). I have connected a computer (A) at the port of VLAN1 FE3 and a computer (B) to VLAN2 FE16 port. I put its IP address and computer default gateway has to 192.168.111.217 to 192.168.111.94. I updated computer B default gateway 192.168.1.1 and 192.168.1.2 IP.
Computer A has access to the Mdaemon Server files via the network grows but no internet (cannot ping google) and can ping computer B and RDP on computer B.
Computer B can ping computer A and RDP on A computer but do not have access to the company network i.e. MDaemon, file server etc. It can also access the internet.
The console I can ping www.google.co.uk and all the ip addresses in the network of the company i.e. 192.168.111.82 (DNS server). I do not understand what I am doing wrong and have been banging my head for staretd a few days a new job and desperately need to work so any help would be greatly appreciated
If I have computer scanner a wireshark wirh internet starts working wheird!
Show the configuration below:
switch7c0a71 #show run
database of VLAN
VLAN 2
output
Add a voice vlan Yes-table 0001e3 Siemens_AG_phone___
Add a voice vlan Yes-table 00036 b Cisco_phone___
Add a voice vlan Yes-table 00096e Avaya___
Add a voice vlan Yes-table 000fe2 H3C_Aolynk___
Add a voice vlan Yes-table 0060 b 9 Philips_and_NEC_AG_phone
Add a voice vlan Yes-table 00d01e Pingtel_phone___
VLAN voice Yes-table add Polycom/Veritel_phone___ 00e075
Add a voice vlan Yes-table 00e0bb 3Com_phone___
interface vlan 2
IP 192.168.1.1 255.255.255.0
output
interface vlan 1
IP 192.168.111.217 255.255.255.0
output
IP route 0.0.0.0 0.0.0.0 192.168.111.254
interface vlan 1
no ip address dhcp
output
Hello interface range vlan 1
hostname switch7c0a71
No complexity of passwords allow
No server snmp Server
interface fastethernet1
switchport mode access
output
interface fastethernet2
switchport mode access
output
interface fastethernet3
switchport mode access
output
interface fastethernet4
switchport mode access
output
interface fastethernet5
switchport mode access
output
fastethernet6 interface
switchport mode access
output
interface fastethernet7
switchport mode access
output
interface fastethernet8
switchport mode access
output
interface fastethernet9
switchport mode access
output
interface fastethernet10
switchport mode access
output
interface fastethernet11
switchport mode access
output
interface fastethernet12
switchport mode access
output
interface fastethernet13
switchport mode access
output
interface fastethernet14
switchport mode access
output
interface fastethernet15
switchport mode access
output
interface fastethernet16
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet17
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet18
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet19
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet20
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet21
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet22
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet23
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet24
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface vlan 2
name of development
output
Hi Richard,
43 - permit Protocol: any / all
42 - Protocol deny EVERYTHING 192.168.2.0 0.0.0.255-> to 192.168.111.0 0.0.0.255
41 - Protocol to deny ALL 192.168.111.0 0.0.0.255-> to 192.168.2.0 0.0.0.255
40 allow the RDP Protocol TO ALL
etc.
To block everything, including MSSQL, with the exception of the RDP and other ports that you defined above. The other defined are simply not the RDP Protocol and service work?
Richard, do note useful messages and identify the right answers.
Best,
David
-
Hello
Not very familiar with the ZBF on the SR520, can anyone please provide me with a configuration allowing the SR520 send ping reply´s.
Concerning
Eivind
Zone firewall configuration can be confusing, especially if one is used to the old configuration of the CBAC-type FW.
Your best resource for this problem is the
Design of the area Guide of Application and firewall policies
http://www.Cisco.com/en/us/products/sw/secursw/ps1018/products_tech_note...
Annex B has an example configuration that would allow ping responses.
There are four basic steps to set up the firewall.
(1) define areas
(2) define the class cards to identify traffic between zones
(3) create a strategy map that defines the action to be taken in terms of class
(4) set up the pair area and apply the policy
In Annex B, you'll see the class map specifying which traffic to inspect. The names of the class map and policy-map could be anything.
class-map type inspect match-any L4-inspect-class
match protocol tcp
match protocol udp
match protocol icmpThe policy map here indicates what action to take, and in this case, the only action is to 'inspect'.
If it was 'drop', the connection would be denied.policy-map type inspect clients-servers-policy
class type inspect L4-inspect-class
inspectHopefully that helps!
Addis
-
How to set authentication with domain name in PL/SQL WebService
Dear Sir
I could see the content of the Web service in a browser with the user name and password then I'v tested with soupUI and I had to enter the user name and password and domain but I couldn't
No information in pl/sql. I think my problem is how to define area.
Browser authentication: OK
username = "TST\saeed".
password = 'test '.
soupUI of authentication: OK
username = "Salam".
password = 'test '.
domain = "TST".
PL/SQL: failure
declare
Utl_http.req req;
resp utl_http.resp;
RW varchar2 (32767).
Start
Utl_http.set_Proxy ('http://127.0.0.0:80');
Req: = utl_http.begin_request ('http://test/sendDATA.ASMX');
UTL_HTTP. SET_AUTHENTICATION (req, 'TST\saeed', 'test', 'Basic', TRUE);
resp: = utl_http.get_response (req);
loop
Start
RW: = null;
Utl_http.read_line (RESP, rw, TRUE);
SYS. DBMS_OUTPUT. Put_line (RW);
exception when others then
"exit";
end;
end loop;
Utl_http.end_response (resp);
end;
Result:
< ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" > ""
" < html xmlns =" http://www.w3.org/1999/xhtml ">
< head >
< meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"
< title > 401 - Unauthorized: access is denied due to credentials not valid. < /title >
< / head >
< body >
< div id = "header" > < error Server h1 > < / h1 > < / div >
< div id = "content" >
< div class = "content-container" > < fieldset >
< h2 > 401 - Unauthorized: access is denied due to credentials not valid. < / h2 >
< h3 > you are not allowed to view this directory or page using the credentials you supplied. < / h3 >
< / fieldset > < / div >
< / div >
< / body >
< / html >
Kind regards
Saeed.
Dear all,
I found with the software "Fiddler Web Debugger" authentication type is notBasic"is"NTLM authentication"so it solved my problem.
Unfortunately, the Oracle UTL_HTTP package does not support NTLM authentication (it only supports basic via the SET_AUTHENTICATION procedure).
Reference: http://ora-00001.blogspot.co.uk/2011/08/ntlm-for-plsql.html by Morten Bråten
Kind regards
Saeed.
-
Pass a request APEX of a database to another database
Hello
Should the method and what steps I follow to physically move an application Oracle APEX of one database to another?
I mean, just by using DataPump export/import of the schema that contains the application data is not enough.
It is also expport posible the entire application as a SQL file from one database to another.
However, other components such as images, logos that are usually defined are shared in APEX components are not exported and lack iin the new database.
Some know how to import applications from APEX, including logos, images to a different database?
Thank you in advance for sharing your experience.
Kind regards
Hi Patrick,
Should the method and what steps I follow to physically move an application Oracle APEX of one database to another?
Using items of support in the way to go.
I mean, just by using DataPump export/import of the schema that contains the application data is not enough.
When you export your application from one database to another, the Data Pump exports just as the objects in the database, as you said quite rightly however under the app go support objects and add the relevant information (DML, Images, objects package scripts and more).
These links could be useful.
- APEX supporting objects: introduction packaged appsApexNinjas | ApexNinjas
- Martin Giffy Souza on Oracle APEX: incorporation of files within the APEX: support objects
- https://docs.Oracle.com/CD/E14373_01/AppDev.32/e11838/deploy.htm#HTMDB11003
It is also expport posible the entire application as a SQL file from one database to another.
However, other components such as images, logos that are usually defined are shared in APEX components are not exported and lack iin the new database.
Yes indeed it is possible, just go through the docs and see if that helps.
Kind regards
Benjamin.
-
Adding data to the ESX host store
Hi all
We are automating the process of adding data to the esx host store. We have all the necessary inputs as a host, Cluster, data center, data store name, store (VMFS) Pat data.
Do we have the cmdlets to get the result? What is the data store should be added after the configuration of the network?
We need confirm that the data store must be there in vcenter/Cluster?
Please help explain the process.
Thanks and greetings
Riyas Hussain has
If the LUNS on which these data warehouses are defined are zoned and correctly configured as a shared, they become automatically visible on the ESXi node.
Do you see the LUN on different nodes of ESXi under storage adapters?
Maybe you are looking for
-
Upgrade to El Capitan has replaced the boot on Configuration partition dual boot
I've been using find for a dual-boot my Macbook Pro with OSX and Ubuntu. Today, I decided to upgrade my OSX Yosemite to El Capitan. After downloading all the 6G, which took about six hours, and the installation program, I received a prompt to restar
-
Driver for Keysight 34461 A DMM instruments works with GPIB, errors with USB
I try to remotely control a DMM of 34461a Keysight using the driver of instruments located here: http://sine.NI.com/apps/UTF8/niid_web_display.model_page?p_model_id=21589 The pilot of the aircraft works like a charm the DMM is connected via GPIB, but
-
How to display waveform data in a Trace of squirm and Wiggle Plot?
Anyone has any advice on how to do it (easily)? Basically, all the foregoing (right) of the axis is filled with color axis.
-
8.1 current Windows of execution, computer laptop has i5 3230 M and a search on the Intel site says 'yes' to display wireless but if I try to install the software to display wireless (sp63552 or sp62309) to get error "this platform is not compatible
-
I lost 16 months of emails when I click "Compact Messages" in Outlook Express - Help!
I searched on the internet and made the following to address my problem- . Working offline with Outlook Express . Open Recycle Bin on the Windows desktop . The '.bak' file located I wanted back . Clicked on the file '.bak' with the right button of th