that cu
I have Tel 6plus
- which I pay to change my phone because my broken screen I'll send to NY USA I need steps
- their way to change my ringtone in whats app
If you bought a device in the United States, it must be repaired in the United States. Cannot send a device via mail or sender of Apple in the United States, they do not accept international shipments. You have to bring yourself back, or send it to a family member or friend to Apple. Costs for 6 more in the United States are $129 for the screen, except if there are more difficult and out-of-warranty replacement cost is $329.
You must contact the support of Whatsapp to see if there is a way to change their tone.
Tags: iPhone
Similar Questions
-
Why do I get a message saying that my computer is not registered for me
I show the icon of the application that will not download because I get a message that says my computer it is not mine or is not saved for me. WHY!
What is the EXACT message you get?
-
AutoCorrect has learned the word that breaks down when it is typed iOS 10
I've been using iOS for more than five years, it seems that my library for automatic correction has become corrupted at least for a specific name entry 'Toni smith' I
Whenever I type the employees name AutoCorrect changes this name string to something that freezes the iOS and iPad all crashes recently I turned off auto correct - dictionary - predictive parameters and it is solved.
ID like to use once again, AutoCorrect is their way to change a setting in the scholarly dictionary?
At first, I thought it was just a keyboard problem, but then I went to the dictation and every time at the end of the dictation. Once again the crashes of iOS it happened in Facebook, ios e-mail and enamel with frozen then similar results to crash.
How to reset my dictionaries through all my idevices. Happening now on ipad and iphone
Settings > general > reset > reset the keyboard dictionary
-
An error in this Applescript that I can't understand
Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:
runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.
Thanks for any help with this problem,
Mike.
property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary
property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}
the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")
the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")
game runScript to 1
tell application "System events".
the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)
the value allVolumes to name of every element of disc of rootVolumes
the value numofallVolumes to the County of allVolumes
Repeat with the present book in allVolumes
say application 'Finder '.
if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then
if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2
runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted
runScript If = 2 then
try
duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume
on error number errorNumber errorMessage
_error value of errorMessage
_errorNum the value to errorNumber
If errorNumber is -15267 then
display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10
If the returned button of result is 'No' then
Error number-128
on the other
If the result is 'OK' or back button gave up lead and then of
eject the present book
display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5
return
end if
end if
end if
end try
Try
duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume
on error number errorNumber errorMessage
_error value of errorMessage
_errorNum the value to errorNumber
If errorNumber is -15267 then
display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10
If the returned button of result is 'No' then
Error number-128
on the other
If the result is 'OK' or back button gave up lead and then of
eject the present book
display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5
return
end if
end if
end if
end try
display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10
If the returned button of result is 'No' then
Error number-128
on the other
If the button returned of result is "OK" or gave up a result then ejection of the this book
display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5
end if
end if
end if
end say
end Repeat
end say
The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:
If the present book is in the ignoredVolumes then
game runScript to 1
on the other
if (the present book as text is not '. ') DS_Store') then
if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2
end if
end if
Of course, you need to remove a "end if' the end of the script.
-
After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue. Connect the printer to my MacBook Pro via USB, I am able to print without problem. Other computers on the network continue to be able to print wireless. When I connect via USB and try to scan a updated driver, download cause analysis a software fault message. Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS? The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.
Open System Preferences > Printers and Scanners and select the print tab.
Then the right or control click on the printer on the left then click: reset the printing system
-
I tried to download macOS Sierra on my macbook pro iOS 10 for a few hours and it still has several hours to go. Should I just download the Capitan instead? All sites tell me that I should update my Safari or I wouldn't even through this disorder.
You must complete the download of Sierra. It is a very large file and will take some time, especially on a slow Internet connection.
(145165)
-
Time machine backup is too large, that is not true, said
After the upgrade to OS Sierra, Time Machine always tells me that the backup is too big to fit on the external drive that I use. I erased the disc and checked all volumes, I don't want to back up. He always tells me that the backup is 2 TB.
My boot drive has 155 GB in use, I do not understand why TM attempts to use 2 TB. I've removed the preferences, he always tells me that it is too big. The external drive has 1 TB of free space.
Any suggestions?
If you open Applications > utilities > Terminal and paste the following command and press return, what is the result:
DF h
-
How to restore a security entrancecode that was not installed by updating to ios10?
Work with the 5s iphone I recently could update to ios10. I did it during the evening. In the morning, I was told the update required an entrycode that was not installed.
I use an entrycode before this and the same works after that.
No longer is my ability to import on my Imac out of the photo on my iphone, it says in Iphoto: cannot import as device is held by entrancecode, you need to unlock the device to import the photo.
My unlock does not work. I tried to connect to itunes, tried to reset, but so far nothing works.
What can I do?
Hello
Go to settings touch id & password if you can't do this support.apple.com contact
See you soon
Brian
-
pop up saying that a device is connected to my Imac with IP
My iMac is completely compromised after having an intrusion on my internet router.
I supported everthing this summer. I tried to reset my IMac to factory settings.
A pop up came in September saying that another device is connected to my internet
connection with an IP address. I called my provider of intellectual property, and they said it was a
Xerox printer. I don't have a Xerox printer.
I followed all the steps in trying to get rid of malware and successfully, I think, to get rid of
It is for 1 or 2 days. But something else is in my system.
Because I tried to protect my computer. I'm changing my internet provider
This week and I would like to hide my IP to my iMac.
Hide my IP to my iMac when I'm on the internet?
K
Depending on your router model, there should be a way of
disable DHCP. It is a method used by the router to assign
IP addresses on your local network when any device attempts
connect you to it. You can then manually assign IP addresses to only
These devices that you want to have access to your router.
If you haven't already done so, you must also change the password (and also
username if the router required) to something else and much stronger.
If it is always the default, with which it was delivered, anyone can understand this.
In addition, if the router is a network capable wireless as well, you must disable the comments
access and create stronger passwords.
Also, make sure that all firewalls is enabled on devices and the
router.
As every router is different, you will need to check the manufacturer's instructions
to make these changes.
-
That the face is lit mode bedside table may be shortened? He remains too bright for too long
That the face is lit mode bedside table may be shortened? He remains too bright for too long.
Hello
No, it is not currently possible to customize the duration for which the screen remains lit mode bedside table.
If you want to send feedback or feature requests to Apple, you can do so here:
-
The upgrade to the will of the Sierra that software redundent
Upgrade to Sierra will make it redundant software?
Hello Robert,
Thank you for using communities Support from Apple!
I see Your ' e concerned about the software that you have installed on your Mac and its compatibility with macOS Sierra. You will need to check with the developers of the software that is installed to see if the version you have is compatible with macOS Sierra, or if there is an update available for her. As a precaution, you can back up your Mac with Time Machine and then, if your software is not supported under macOS Sierra, just go back to your previous backup:
Use Time Machine to back up or restore your Mac
Take care.
-
After Malware that my login is disabled cannot start in safe mode
Hi if anyone can help.
A friend tried to watch movies online, I'm not sure of the site they visited, but were asked to install MacKeeper and I believe that they did, as I noticed it was to download and installed the following day and I asked them why they did this and they said it was the only way to watch movies!
Anyway to cut a long story short my friend then called me to say they received a "pop" window to say that my computer has a virus and call a number of 1800... I told them to do nothing certainly not call the number and I would like to sort.
So basically since then that then I can not connect to my main account at the start, the section where you type your password won't let me type into it and there is a symbol of the brand of 'question' next to it. If I hold my mouse over the question mark I get a dialog box stating "Please enter your password to iCloud as... as well as the date. I can only login as a guest and I cannot connect in 'safe' mode by holding down the SHIFT key.
I deleted the MacKeeper Application (and also another OS player application that is newly installed the same day!) and empty the memory cache of my browsers and also now upgraded to 10.11.6
I also run disk utilities, but still I'm getting this problem trying to connect to my main user account!
I think that it is some kind of malware, does anyone have ideas how to solve at least the connection problem?
If I could stamp out to see if there is any malware stuff going on behind the scenes it would be too great!
All suggestions welcome.
Thanks, Ciaran
How did you uninstall the MacKeeper application? Please be as specific as possible, unless you have followed the steps, I suspect that your system has installed to uninstall. If this is the case then you will need to re-install and uninstall immediately by following the instructions of developers. Otherwise, the best thing to do is to do a wipe and installing OS X and then manually install your applications and restore your data from your Time Machine backup.
I'm sure you probably learned to not let this 'friend' enter the 100' of your computer.
-
I think I need to replace my iPad in order to do that I need to know if I can go to my nearest apple store and ask for a replacement or I should send it to the store where I bought my iPad? because I bought the Japan but at the moment I live in China.
If it's a single wi - fi device, you should be fine in China. However, if it's a camera cell phone WiFi, you will have to go back to Japan with her.
-
iPhone 7 more sudden that it recharges when you use the camera
My iPhone more brand-new 7A they weird sudden reboots when I start the camera application. I hear the camera application, point, shoot the picture and everything becomes black and the phone made a quick restart. This means that it takes only about 3 or 4 seconds for the phone to come back alive and operational (I have to return my password instead of use the fingerprint).
This happens too often, but not always. It can happen at the launch of the application of the camera itself or when you try to use the camera via Whatsapp or Facebook Messenger for example.
Is this a known bug or should I consider taking the phone...
You can try to reset your device. Press and hold On / Off and the Volume key down until you see the Apple logo.
-
Something is wrong! Start in safe mode, but it turns out that for Normal mode.
Mac Mini (late 2014)
Processor 3 GHz Intel Core i7
16GB 1600 MHz DDR3 memory
Start drive Macintosh HD
Iris 1536 MB Intel graphics card
Monitor: DELL U2713HM, use the Apple adapter to connect to the Mac Mini
I upgraded from Capitan in Sierra and got the problem that after I pressed the power button, the screen is full white. This problem has occurred on the Sierra, never happened in Capitan.
I went to the Apple store today, they made a few diagnostic and found no problem. Everything is good. System is fine too. In the Apple store, they showed me to press SHIFT after I press the power button and it will start up the Mac in safe mode. They told me this can sometimes help fixing the boot issue. My Mac actually works very well in the Apple store. I tried the power and turned off twice in the store, and there is no problem. I am happy and come home.
After I go home, I turn on my Mac, it always has the same problem before you go to the Apple store, after I pressed the power button, the screen is completely blank. So I tried to boot mode safe by pressing Shift and taking until I saw the Apple logo on the screen.
After I log in, I checked my Mac mode, this is actually Normal mode!
If I intended to power to the top of my Mac in safe mode but it turns out to be normal.
If I do not press SHIFT and hold it pressed down after I turn on the power, I'll have just a white screen!
It works very well in Apple store, but not in my own House.
Anyone know what is happening?
What is different between your system and the store? Have you taken your own keyboard & they were they that? If you use a bluetooth keyboard try using a wired USB one instead. Is this an original Apple keyboard?
Do you have other devices connected? If you delete them.
Please see the article below from Apple, it has information about starting in safe mode without keyboard (by setting a NVRAM variable). If you enter a work boot, you can put the mini in safe mode from there, via the command appears on this page...
Try safe mode if your Mac does not end commissioning - Apple Support
I would like to start trying to make another bootable OS disc - either an installation disc or a complete operating system to see if the Mac can be started OK to a different installation of OS - which indicates if the operating system or disk are part of your question, or if the material is simply unable to work correctly at all.
-
My iPod touch is safe after that?
I was using just my iPod touch 6th generation to navigate on the internet. I am enrolled in a Forum that I visit daily to freeforums & he began to reorient me very quickly but nothing CAMR upward. I closed my browser & deleted my settings. Signed in the forum again & it's the same thing.
The forum can give me a virus, Trojan, malware or something? Everything else seems to work fine now, but I am worried bc I use my iPod a lot (at the time)
is I do?
Abe how do I know when I should return to the site?
It's probably a malicious ad on the site. sometimes site owners know, other times they get their ads with a company and they have no idea what drives this company.
It is also possible that the forum has been hacked to repel the bad things. I would just avoid it.
Maybe you are looking for
-
which driver to download for my hp probook 430 g1?
which driver for wireless download for my hp probook 430 g1? in support, there are a lot of what I can download? I have a mediatek mt7630e
-
Hi all My boss asked me to set up an OS X server from scratch and I have no knowledge of how while I am qualified as a graphic designer and only have knowledge of management of minor network which has been accumulated over the years. I have no form
-
PC see Droid when connected but will not have access
When I connect the droid to PC is the new player - when I try to access a message appears "insert a disk in the removable drive. any thoughts? Thank you...
-
I recently updated a graphics program, Paint.Net, to the most recent version v3.5.5. He properly installed and works well in all means, until I selected the text tool. This automatically causes the program to crash. I sent several newspapers acci
-
role of the crypto map sequence number
I'm setting up IPSEC in four sites in a manner completely mesh. The problem I have is one of the sites is our main hub and everything works on a class B network. Creating ACL to get from one place to another is relatively simple, but getting a site o