PC see Droid when connected but will not have access

Similar Questions

• I canceled my plan creative cloud, but still make me take days of billing, but do not have access to my creative cloud products.

  I canceled my plan creative cloud, but still make me take days of billing, but do not have access to my creative cloud products.

  I can't find any subscription/order on the adobe ID associated with this profile. Could you please provide the email address in a personal message.

  Kind regards

  Hervé Khare

• Watch WiFi is connected but will not connect to internet

  I have an iPad 2 which, all of a sudden (in the Middle streaming), is more connected to the internet.  I rest the network settings, when this does not work, I have reset all settings, stopped and rebooted, all done basically.  It shows that its connected to my WiFi, but will not connect to internet.  All the other devices in my house work, then there must be a problem with the iPad.

  Reset the router: just pull the power for a few seconds and reconnect. No parameter to get lost.  Other devices operating with success is not serious. The router has probably received an invalid address for the iPad.

• Cannot access Internet. It says I'm connected but will not display web pages.

  Original title: web no

  Unable to connect to the web says I'm connected but does not display pages

  Hello

  I suggest that refer you to the articles below that explain some troubleshooting steps basic to perform when you receive Internet connection problems.

  Why can't I connect to the internet?

  http://Windows.Microsoft.com/en-GB/Windows/cant-connect-Internet

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-GB/Windows/cant-connect-to-network

  If the advice above do not work, try to run a startup mode in minimum mode which must start Windows with only a minimal set of services and programs.

  How to do a clean boot mode

  http://support.Microsoft.com/kb/929135

  Note: After you perform a clean boot, be sure to check the "How to reset the computer to start normally after a boot minimum troubleshooting" section on the article above to start Windows normally.

  Thank you

  Legaede

• WAG54GS allows wireless clients to connect but will not assign IP addresses for full connectivity

  I have three XP 3 computers connected between them in a MS home network via a wired hub and access to the internet through a wired connection to a router WAG54GS.  DHCP is enabled on the router, the IP addresses are correctly assigned and internet access to these computers Wired is not a problem.

  In the past, I've connected also with success of laptops to the internet via the feature wireless router, but having not used that for a while, I think now it will not work.  I tried to connect with laptop computers running XP 2 and Vista Home and the problem is the same.  Laptops find broadcasting wireless router and connect but they are not assigned IP addresses during the phase of "Acquiring IP address" resulting in a "Limited or no connectivity message."  Packets are sent to the router, but none are received in return. It is with the strength of the Signal at 73% and the quality of the link to 100%.  Ipconfig displays no deafult assigned gateway and the IP auto configured to be 169.254.96.1 for example.  Ping the router gives "Destination host unreachable".  Not surprisingly, laptops are able to 'see' other computers wired on the MS. network  These laptops connect correctly to the MS network and internet if I change the wired connection.

  If I check the status of the network wireless router configuration good laptops MAC addresses are displayed, but the computer name and the IP address are missing.  I usually use a protection WEP 128 bit on two channels 6 and 13, but it makes no difference if I change this without guarantee, once again the connection occurs, but no IP address is assigned.  DHCP is enabled in the tab for basic configuration of router from 192.168.1.100 with selected up to 50 users DHCP (and DHCP works very well for cable customers).  The IP address of the router is set to 192.168.1.2.  Wi - Fi router is set to "allow everything".  Default settings are used for the parameters wireless advanced, although I tried to reduce the 100 interbval tag at 50 and the RTS and Fragmentation threshold to 2304.  The policy of Internet access on the router is disabled.

  If I have (for purposes of testing only) connect laptops to one of my neighbors secure networks (there are several) to connect laptops very well so I can access the internet, DHCP works great on laptops.  Firmware is v1.00.08 (I looked this modernization, but while I can identify my router version 1.2 downloads talk about types of Annex A and Annex B are mutually exclusive and I'm not clear I have.  I am also doubtful as to if the firmware upgrade would make a difference, because there is no trace of the upgrade solve this kind of problem and I had the Wireless does not work if long ago).  I'm running out of ideas, is there something that I missed?

  Well in this case you can try to upgrade the firmware of your router, go to the website http://www.linksysbycisco.com/UK/en/support/WAG54GS/download...insert of your router model serach tab... select the correct version of your router... Download the firmware file... save this file on the desktop.

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Once you re-configured settings of your router, and you are able to go online Wired computer, here are some settings that you can configure your wireless router, I think this might solve your problem

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings... Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... And check if you are able to navigate.

• Operating system on laptop hard drive lost. I have a XP Recovery CD, but do not have access due to no operating system.

  Hard drive has been reformatted but not as a system disk. Laptop lacks a floppy drive to boot from. Any ideas on the question: How can I format HD as system disk?

  Highlite,
  So unless you have a floppy, it seems that you could be in trouble.  If your BIOS will not boot from CD then you can contact the manufacturer and see if they can send you a diskette or if they have another way to get the system to boot from the CD.  Or there's always the ebay... you may be able to find a set of readers for sale.  :(  A local PC shop may be able to help. QQ learn manage!

• I have a subscription to creative cloud, but do not have access to acrobat reader dc

  I have a subscription to Creative cloud which says that I have access to the full version of Acrobat Reader DC. However, when I open Acrobat Reader DC and I connect with my creative cloud user account, I get only have access to the free version of Acrobat Reader DC, which excludes features such as PDF editing functions (delete page for example).

  Hi tweedie,

  Please download Acrobat DC of your application in creative cloud on your system.

  Then you can 'Edit PDF' under the Tools menu in Acrobat DC. Acrobat Help. Edit PDF files

  Let me know if you need additional assistance.

  Kind regards

  Meenakshi

• Re: My Satellite C660 is connected to my router but did not have access to the internet

  Hello

  I have a Satellite C660 (Windows 7) that I've had for more than a year. I had no problem with the connection to the internet before, but last week I went online and had a small yellow triangle down, at the bottom right of my screen against the bar of connectivity. When I click to connect to my router, it says that it is connected with a signal excellent but says that I have no internet access.

  Can someone please?

  Have you tried to reboot your router?
  Please, do it and check if the problem still persists.

• I have paid subscription for ExportPDF but do not have access after a day-why?

  Yesterday I subscribed to ExportPDF - paid for it.   Was later said it would take a couple more hours before it could be used.  A day later, the site only wants you re-register!

  Please tell us how to make it work.

  Hi Fedup

  Please join adobe Support and they will help you.

  We invite you to contact our support at http://adobe.ly/yxj0t6 team

  Or

  Contact by phone: 1-800-833-6687

• I bought a license and installed on 3 computers but do not have access to 2 of them now, how can I disable these computers?

  I don't know the product key more. Is it maybe linked to my adobe account? Or y at - it a way to make adobe look it up?

  Sign in to your Adobe account.

  Adobe ID code

  If you can't get satisfaction, contact Adobe customer via phone or Live Chat.

  Contact the customer service

  Nancy O.

• A DBA how to set permissions so that its users can submit to its form but do not have to execute queries or touch the database?

  Original title: InfoPath/SQL

  I am familiar with InfoPath, but I'm a DBA to a database on SQL server. The person created the infopath form and there users who can submit to the form, however, the only ones who can submit to the form are those who have access to SQL. A DBA how to set permissions so that its users can submit to its form, but do not have access to run queries or press my database. Thank you

  Ask the question in the SQL Server forums:
  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

• Windows Live ID account compromised. Do not have access to the email address there at - it another way to verify my account?

  First of all, my hotmail account has been hacked.  When asked to verify my account my e-mail is an old e-mail account that I no longer have access to.

  I am able to change my password and connect, but may not have passed the first page.

  Now, my account was closed and I contacted the support (13 March) and received a ticket support number but have not received anything back (March 15).

  There is anything I can do to get my active account even once, as I have a lot of important information in my Inbox that I need to get access to as soon as possible.

  Any help would be appreciated.

  Thank you very much

  Submit queries from Hotmail on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• Satellite L300-135 see WLan network but will not connect

  Well well, (new laptop) initially, it worked with my BT hub at home... then decided to not stop working - receives no signal or response from the router - even though other laptops in the House can connect without any problems

  and now the Wireless does not work - IE. I can see the wireless connection but cannot connect.

  I don't know that the wireless is not cut (until someone suggests)

  I looked for more up-to-date drivers, but nothing seems to work.

  Help, please!

  Hello

  First of all, you should check if your wireless network card is correctly recognized.
  I mean to check in the Device Manager!

  Your wireless network card must be the Realtek 802.11 g (RTL8187B)
  Download and install the latest driver WLan in the Realtek page.
  Then update the BIOS.

  Finally, reconfigure all WLan settings.
  In the Device Manager-> properties-> Advanced tab card WLan disable energy saving settings and check the other parameters that may affect the connectivity.

  Good luck

• Firefox shows upwards on the taskbar but will not maximize when clicking on window

  I tried re installation, but when I click the icon it will appear on the taskbar but will not maximize.

  It is a more detailed explanation of the above.

  Sometimes, a window is "off the screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or the search for the start bar menu (or Windows 8.1 may bar charms bar research?) type or paste the following and press ENTER to drill down to the profiles folder:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions