That errro again... host currently has no error management network redundancy
I don't get the "host currently has no error management network redundancy.
I think that I have the correct configuration, but not sure since our network guys gave me the IP addresses to use for HA.
Here is the config for HA
ESX Server 6.
Service console is on 0 to 172.16.1.106 in 255.255.0.0 vSwitch
The second redundancy console) is on vSwitch 4 to 77.77.77.10 in 255.255.255.0.
ESX Server 5.
Service console is on vSwitch 4 to 172.16.1.105 in 255.255.0.0
The second redundancy console) is on vSwitch 4 to 77.77.77.9 in 255.255.255.0.
I've reconfigured HA on ESX Server 6 and ESX Server 5 and even restarted them but still not the mistake of redundancy...
Something is not properly configured?
stanj wrote:
If the collection of network adapters offer the same functions of redundancy, so why so many articles point to using a second console HA redundancy?
It's simply the options given. There are several ways to provide a redundancy of HA heartbeat.
The article also indicates HA advanced features such as das.isolationaddress2 and das.failuredetectiontime will be charged when you set up a secondary service console. It is an approach more effective, but still more complicated?
These advanced options are not always available and also provide another way to configure HA redunancy.
Here's something interesting to look at as well
http://www.yellow-bricks.com/VMware-high-availability-deepdiv/
For me, I always learned the KISS method (Keep it Simple stupid). Add a second NETWORK card is the easiest way to keep your redundant environment, in my opinion
Tags: VMware
Similar Questions
-
"This host currently has no management network redundancy", but there are?
While in vcenter, the summary for a host tab displays this message:
"This host currently has no management network redundancy.
I have attached photos of the host > Configuration > network and host > Configuration > network cards pages. It seems to me that the management network is behind 2 NIC's team together.
What I am doing wrong? How can I fix?
Thank you
More than an idea. Righ click hosts and run "reconfigure for HA.
André
-
I use Chrome.
When I try to down load a creative Cloud application, I answer the questions, then click on "continue".
I get an error message in the browser window that says: ' we are currently experiencing some issues, please try again later ".
It makes no difference to try again later.
Try links below:
WINDOWS:
https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe
MAC:
https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg
-
My intelli mouse stopped working and what I get is "(32 Rudll) windows host process has stopped working" what's happened?
Hi Stevan I am,
1. for how long have you been faced with this problem?
2. did you of recent changes on the computer?
3 do you mean the computer crashes when you get the error?Method 1:
You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to perform a Scan SFC -
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/929833Method 2:
You can perform a clean boot and check if you are facing the same question to the clean boot. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -
http://support.Microsoft.com/kb/929135
If the problem is resolved check which service is causing the problem; referring to article and following the other steps.
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:a. Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.b. on the general tab, click the Normal startup option and then click OK.
c. When you are prompted to restart the computer, click on restart.
I hope this helps.
-
I tried to empty the trash. After clicking on empty the trash. An error comes up saying that this cannot be done due to the error 50.
Tried to check and repair disk permissions. This finished.
Then tried to empty the trash again and got the same error 50 yet.
I rebooted my macbook. When it restarted it flashed the apple logo, progress bar began to charge up to 15%, then the black and white code popped up for a few seconds, then a box pops up saying "your computer has restarted because of an error, press any key to restart." It is now is an endless restart loop.
I can't go in safe mode or in disk utility.
Any suggestions on what to try?
Thank you
What happens when you try to restart without danger as indicated to OS X Yosemite: start in safe mode
-
I have a hp Pavilion working with XP but recently I installed Windows Office 2007. Since then, I have problems with the sound system. I got a message saying that the Generic Host Process for Win32 Services has had a problem and will end. Then I have no more sound. I can't open the volume control as the system says that nothing is installed. I always need to restart my computer to get the sound working again. Help!
Thank you, Jerry. I'll try it, but for now it works well. I fit it and it seems to have done the trick.
See you soon,.
Karine -
Control Center cataslyst error "the host application has stopped working".
Hello
Is anyone know the cause & how to fix error "catalyst control Center - host application has stopped working"?
Hello
1. when exactly you get this error message?
I suggest you to follow these steps and check if that helps:
Method 1:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
Method 2:
Try to update the latest drivers for the graphics card and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyIt will be useful.
-
Once again; same problem, others have encountered but nothing seems to work.
An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.
We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated
1 physical servers
-Internal IP address; 172.16.160.21
-FARM FirewallvCenter Server
-Internal IP address; 172.16.1.85
-Local Office (ALX)
Location of destination (ESXi host):
-Internal IP address; 172.16.153.20
-Firewall ROOMMATE
Already completed:VMware KB: disable SSL on VMware Converter Standalone 5.x encryption SSL disabled in converter-worker
Firewall are open / Tunnel is open throughout the environment.
I have attached the logs.
Thank you very much
POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?
-
Site not give me the ability to download Flash CC, when I click on download it says: "we are currently experiencing issues, please try again later" there is no error code at all. Do this please be fixed soon? I spent all night my O.S. Update prepares to use the Flash, and now I can't download it. I have I need to work on important projects.
Hello Becca,
Please try to download the CC application directly on the link below:
Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools
Hope that helps!
Kind regards
Sheena
-
I get the message that the installation was successful but patch has no error number U44M1l210
Tried to install twice now. First of all a failure. I uninstalled then downloaded again. Second time get exactly the same error again.
I get the message that the installation was successful but patch has no error number U44M1l210
Creative cloud help / error U44M1I210 | Install the updates:
http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1i210-installing-updates-CCM.html
-
"previous installation of host services has detected the error.
I posted this in the beta forum and not answer. I'll try here... Here is the link to the beta forum: http://communities.vmware.com/thread/278405
Try to uninstall a component, vShield, in this example, the portion of Port Group isolation. I get the following error:
"previous installation of host services has detected the error.
ESXi V4.1
VMkernel is on a dvSwitch
Thank you
Mike
THIS ONLY if APPLIES to vShield Zones / App vShield
One last thing, you mentioned this announcement on the beta site which tells me that you had a pre - GA on areas/App version installed. If that were the case, or maybe a previous installation of App/areas (Beta) had an installation/uninstallation failed, then do this procedure to clean the host of all the previous components.
1. remove the vmservice-vswitch created during installation (assuming that there is no other device that uses this vswitch)
2 remove the address 169.x.x.x, given the Net.DVFilterBindIpAddress of the host property.
Detailed procedure:
1. go through the uninstall process each time as
possible (if one of the components to show as it is installed). Then go to the
next steps.
2. search for the vmservice-vswitch and delete
it. it is a vSwitch without physical adapters service that was created
during the installation. It will have 2 groups of ports, one called
vmservice-vmknic-pg and the other vmservice vsheild pg.
3. Select the ESX host on the left hand side
tree on the right hand click the Configuration tab pane and click
Advanced settings of the software. In the Advaced search page settings
the Net section, then select it. Scroll through all the
way down and then make your way up until you find
Net.DVFilterBindIpAddress = 169.254.1.1. Remove the 169.254.1.1 and
Click OK.
4. installation of APP vShield vShield Zones should now work.
-
Hello, I use MS Outlook 2007 and Windows Vista. I get an error message when it is sent and receipt that States - "your IMAP server wishes to alert you on the following: 100 (1032), that mail is not currently available."
I have studied this issue online and I was unable to find a solution. I went to the MS Office support, they have major problems, but they do not have a space where you can type in your question, which was not helpful. I also went to Outlook - Tools - account settings - then I fixed the 6 emails that have IMAP. It will setup process and once finished it is said: "Congratulations," I have sent test emails to other emails to all IMAP accounts and I received. The error message constantly, and I don't know what else to do. Help, please!
I also have two accounts pop.
I thank anyone who can help me with this in advance.
Vivian
Hello Lunabear,
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to MS OUTLOOK and would be better suited in the DISCUSSION GROUP of the AGENCY. Please visit the link below to find a community that will provide the support you want.
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
Click a topic under Outlook, created a new sketch and post your question and that someone in the group will be able to help you on the way to solve this problem
Hope this information is useful.
David O
Microsoft Answers Support Engineer
Visit our and tell us what you think. -
Get the Error message host application has stopped working
What is a catalyst control center? I get a warning saying that my catalyst control centre: host application has stopped working. is it important, and should I re - download? If so where what to do?
Hello
The ATI Catalyst Control Center is a control application of 3D acceleration that allows you to control features of your graphics card. ATI Catalyst Control Center can be used to fine-tune your graphics settings, enable or disable connected display devices, and change the orientation of your desktop, etc. Many features show you a preview of your changes before applying them.
You can download from following link catalyst control center and check if the problem is solved or not.
http://support.AMD.com/us/pages/AMDSupportHub.aspx
Hope that helps.
-
a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available
Check if you have picked up malware in your travels.
I see a lot of recommendations here for programs such as -
Malwarebytes' Anti-Malware
http://www.Malwarebytes.org/MBAM.phpSuperAntispyware
http://SUPERAntiSpyware.com/Check in safe mode.
Vista advanced boot options
http://Techblissonline.com/Vista-advanced-boot-options/See if you can isolate a possible cause.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135 -
Original title: update windows
I downloaded windows 10 but not able to install that, due to a problem. now m by downloading again n it's show error 80010108. pls help me.
thanku
Try to upgrade manually:
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: determine if a device application or hardware is compatible with Windows 10
- Will remain the documents and applications, or install app must
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
Maybe you are looking for
-
SCXI-1378, R8 - R39 riders shorting terminal block.
I am starting a small passage / measurement of resistances 10 devices inside a cold room project. I'm using an SCXI chassis. The chassis contains a SCXI-1121 (4 Ch isolation AMPS) with a block to connect SCXI-1325 and an SCXI-1130 (Switch Module) mo
-
Hello, I had this little mini stuck in a drawer for some time and he finally came out to tinker a bit with her... And for the life of me cannont remember exactly what the password is supposed to be... If someone here can help me with this it would be
-
Here's the thing - I need a tip, the internal sticker shows many Chinese photo, the only thing that is written in the Latin alphabet is the first line: Know it: 1584-100 (space) S/N: a very long number - do not know if I should paste here. It is a ve
-
What PCMCIA or USB DAQ card to buy?
For the purposes of my project, I would like read 2 quadrature encoders and2 analog outputs (0 to + 5 V) duty to control 2 Motors simultaneously.What PCMCIA or USB card that you would recommend for me? The PCI card that I used for the same project wa
-
I get an 80070663 error when installing an update on the computer.
Original title: impossible to install KB2687499 on Windows Vista The microsoft Installer Update continues to detect sequences of security update Microsoft Office (KB2687499) 32 - bit Edition if necessary to install on my system and continues to fail.