Get the Error message host application has stopped working

Similar Questions

• I'm having a problem at the opening of the pdf document.  I get the error message: 'Adobe Reader has stopped working ".

  I'm having a problem at the opening of the pdf document.  I get the error message: "Adobe Reader has stopped working" then I get Windows to search online for a solution, but then my document is closed. I tried to uninstall and reinstall Adobe Reader XI, restarted my computer, but it did not help.  I get the same message. What should do?

  Can you open Reader by itself?  If so, check that disable the Protected Mode improves the situation [Edit |] Preferences | (Improved) security].

• Whenever I log in I get an error message "Windows Update has stopped working".

  original title: everytime I log in I get an error message "Windows Update has stopped working".  I tried a manual update as well and it does not work.

  In details, the error message is:

  Signature of the problem:

  Problem event name: BEX

  Application name: wuauclt.exe

  Application version: 7.4.7600.226

  Application timestamp: 4a7b870b

  Fault Module name: StackHash_6bc7

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 00404968

  Exception code: c0000005

  Exception data: 00000008

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 2057

  Additional information 1: 6bc7

  More information 2: f3f6a1403802118ada460cd45530935b

  Information additional 3:6477

  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  HiTunnywig,

   

  (1) since when are you facing this problem?

  (2) are - what you remember for change?

   

  Wuauclt.exe rest reside in the background and checks the Microsoft Web site for updates to the operating system. Originally, wuauclt.exe is a legitimate system process, which is located in C:\Windows\System32, but there are cases where wuauclt.exe is actually a disguised virus, Trojan or worm.

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:  Run the fixit available in the article below to reset the Windows Update components

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• After the update to the latest version of iTunes, it includes the error message 'Push Apple has stopped working' and ITune could not be started

  iTune cannot be started on Win 7 after recent update with error message "Push Apple has stopped working"

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• Error message "Xtray application has stopped working."

  I get the following error messages when I start my computer and enter the part of Windows Vista from the boot sequence.  I am able to close these error messages and works normally, but I fear that they could be a precursor to more serious problems later.  Anyone who understands what is perhaps the underlying problem and how to fix it would be greatly appreciated.

  Error messages

  1. "the procedure entry point? 0CAlert @ QAEQW4ALERT_TYPE@PAUHWND_@@HPB_W2222H2HH_N@Z not found in the Win32RenderingEngine.dll dynamic link library. »

  2. "XTray Application has stopped working".

  Google has no useful info relating to your problem.

  ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Continue to receive the Error Message: "SystemK Module has stopped working".

  Update Google Earth yesterday.  Since then, received message: "SystemK Module has stopped working".  Any ideas on how to get rid of this message?  Thank you, Janet

  

  I solved the problem myself.  He returned to an update to Google Earth.  Another search engine has been installed (I tried to abort)... that's what has caused this problem.  Once I deleted all the files from search engines and (Yes, yet another program associate (!), the problem solved).

  Thank you.

• Recently loaded a tax program and I get an error message (HR Block has stopped working) trying to open the program.

  Disk load and got the habit successfully installed. Click the icon to open and get the program has stopped working. Removed and reinstalled, but get the same results.

  Hi Nerraw,

  If you are able to access the program from another user, then your user account is damaged. You must follow the steps in the following article to resolve the corrupted user account.

  Difficulty of a corrupted user profile

• soft arc provided with my computer, but now I get an error message that it has stopped working

  soft arc has been installed on my computer when I boughtit, but it has suddenly stopped working

  Hi Baynyts,

  ·         What is the full error message?

  ·         What version of the operating system is installed on your computer?

  I suggest you to uninstall and reinstall the software and check if it helps.

  You can visit the article to uninstall and reinstall the program:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I hope this helps.

• Receive error message "MFC Application has stop working" when you try to run a PED Basic on Windows 7

  Original title: I am trying to run a PED Basic on Windows 7, I am not able to access my creations on my hard drive. When I try to open the file, I get a MFC Application has quit job message. Any ideas? __

  Window 7

  1.06 based PED

  Hello photoheiress,

  Check the following:
  1) go to Brother Web site and check you have the latest Windows 7 drivers/software for your Brother model.
  (2) try to run in Compatibility Mode. If your Brother model is compatible with Windows XP, then choose XP or the brother Software was written for any operating system.
  (3) when you install the setup.exe or .msi file, right click and select "run as Administrator".

  If please reply back and let us know if none of the suggestions helped solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Whenever I restart my computer, I get the following message: PrinterSelect.exe has stopped working. Windows can check online for a solution to the problem.

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: printerselect.exe
  Signature of the problem 02: 1.0.2453.22313
  Signature of the problem 03: 450fe152
  Signature of the problem 04: mscorlib
  Signature of the problem 05: 2.0.0.0
  Signature of the 06 problem: 4a7cd8f7
  Signature of the problem 07: e4
  Signature of the 08:10 problem
  Signature of the problem 09: System.Security.Security
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  To install a new all-in-one, I'm afraid that I will continue to have problems and the same error message.  Any help would be appreciated.

  Hi dtwes,

  try to stop the program from running at startup:

  Tutorial: http://www.vista4beginners.com/System-Configuration-Utility
  deselect 'printerselect.exe '.

  I hope this helps.

• Error message "Windows Explorer has stopped working"

  I have windows vista home edition, I get the error message "Windows Explorer has stopped working"

  I have two options, either to find a solution online and restart the program or restart the program. in all cases I restart Explorer and again get the error message, and then restart, etc...

  The following are the details of the problem. I tried to remove all CMD services and reboot, but it did not help

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: explorer.exe

  Application version: 6.0.6002.18005

  Application timestamp: 49e01da5

  Fault Module name: 2287.tmp

  Fault Module Version: 4.80.0.0

  Timestamp of Module error: 4c8c71fb

  Exception code: c0000005

  Exception offset: 000a7d70

  OS version: 6.0.6002.2.2.0.768.2

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Read our privacy statement:

  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Problem event name: APPCRASH

  Application name: explorer.exe

  Application version: 6.0.6002.18005

  Fault Module name: 2287.tmp

  Fault Module Version: 4.80.0.0

  Hello

  Start Search ShellExView [1] for the 2287.tmp file and disable the entry.

  André

  [1] http://www.nirsoft.net/utils/shexview.html

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Control Center cataslyst error "the host application has stopped working".

  Hello

  Is anyone know the cause & how to fix error "catalyst control Center - host application has stopped working"?

  Hello

  1. when exactly you get this error message?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Method 2:
  Try to update the latest drivers for the graphics card and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• "CatalystControlCentre: the host application has stopped working".

  I get this message when I boot: ' CatalystControlCentre: the host application has stopped working. . Caused A problem blocking the program works correctly. Windows will close the program and notify you if a solution is available. " This happened after I got malware and have since sent to quarantine. A / the result is that the wallpaper is gone replaced by a black screen. Some of the icons on the screen and the line along the bottom disappeared. How can I fix it? What I have to find and pay a professional to do it, or can I fix it myself?

  Hi Eagle-B

  
  Did you put the virus in quarantine?

   

  It seems that you still have the virus or malware present on the computer. I suggest you to contact the team of experts on the issue. Also, you can visit the Microsoft security essentials forum for assistance for the number and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/msescan/threads?filter=answered

   

  I hope this helps.

• Satellite L500D-144 - CCC of the host Application has stopped working

  Ladies and gentlemen,

  My PSLT6E - 007004GR is almost a year.
  This month, there was an update - possibly to leave Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
  Catalyst Control Center. The host Application has stopped working, it is looking for a solution.

  A new installation of the driver graphics card and Catalyst Control Center has not changed. Instead, a standard Microsoft graphics card driver is installed.
  Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  Is it reproducible.

  Have already reported more customers or I'm the first?

  What can you do to the problem?

  Sincerely,

  CBluebaerchen

  Hello

  > Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  To do this the display of Windows Update driver update?

  If so, restore the system to an earlier point and disable this update of the display driver and choose only the updates of Windows. That s enough.

  Otherwise, you can try running CCleaner. It can clean and fix registry problems.

• Why my Catalyst Center: the host application has stopped working?

  When I log on my computer, a window opens in two separate occasions stating that Catalyst Center: the host application has stopped working... How can this be repaired?

  Hi Missy,

  This probably isn't a problem MSE or malware.  It could be a problem with the video software (which is otherwise commonly) and I have it on my system as well for my ATI graphics card.

  This just started recently - as the last day or more?  If so, try a system restore to before it started to see if that helps. If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

  Good luck!

  Kosh