That 'exactly' the brightness setting in the press?

Similar Questions

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I want to restore the factory setting. I press F8 and their credentials for 'user '.

  Original title: I tried to restore my computer and it shows the other user. What should I do?

  I have a windows vista Dell and I want to restore the factory setting. I press f8 when the computer starts and then I choose the repair option. After that, it shows a written page another user with two spaces a username and another for the password. I tried to write my username and leave the password blank, but it does not work. I want to know if there is another way to restore or if should I do something?

  Hello

  This is Dells use of their recovery partition information

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  For more information, contact Dell

  http://support.Dell.com/

  or try the dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• Could the developers of Firefox please re - implement the functionality that allows you to set a specific webpage for recently open tabs (as prevented from 2015-Oct-03)?

  October 4, 2015.
  This question is more for developers and users.
  With the introduction of new controls tab an hour or two there is the subject: Config, definition of browser.newtab.url is no longer works. I found this feature very useful, and many don't like new tabs display of my pages preferred in form of icons (or other), or just to be a Virgin.
  If this question does not reach developers (people who I'm and all Firefox users are in debt, although not financially), could they consider adding a parameter new tab control that provides the ability to define a selected page that may not necessarily be the homepage?
  Thank you.

  Hi, 41 of Firefox, you must use the add-on tab override (browser.newtab.url replacement), to make changes to the page tab.

  Once installed, open the Add-ons (Ctrl + Shift + A) Manager > Extensions, and then look for the new tab override and click Options to set your preference.

  Notice, if you want only the new tab to be the same as your home page, you can use the Add on new tab homepage instead.

  You will then need to restart Firefox for all changes to take effect.

  If you want to go back to the Mozilla developers, you can do here.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• How can I make sure that only the Web site that sets the cookie can read it?

  I want some websites to be able to store cookies and use them, but I don't want other sites to use these same cookies.
  I know how enable/allow per session/block and I have same cookie manage extensions.
  What I can't find anywhere is information on who can read the cookies once they are defined.

  Only website (server or domain) that sets a cookie can read this cookie, but it can be an iframe embedded with another domain that defines the so called third-party cookies.

  You can disable third-party cookies.

  • https://support.Mozilla.org/KB/disabling+third+party+cookies

• I just started using my new iMac 27 "and in Mail, I can't find the setting to display a column that shows the number of emails in each folder.  Mavericks, I had this column.  I have checked all the menus and preferences and search online.

  I just started using my new iMac 27 "and in Mail, I can't find the setting to display a column that shows the number of emails in each folder.  Mavericks, I had this column.  I have checked all the menus and preferences and search online.

  Click the triangle next to the Inbox to view the Inbox for each account. Then select the desired mailbox and the information will be displayed in the upper part.

  You are entitled to 90 days telephone support from Apple. Try to contact them.

  Apple Support contact

  Apple Support by email or chat

  Contact Apple Support - phone

• Setting the properties of elements of façade in XControl to a VI that uses the XControl

  Hi all

  I'm new to XControls and I try to use them to make a generic digital indicator that fit into a matrix of waveforms of a similar measure and allow the user to display the first value of a waveform, it chooses by selecting the name of the desired channel in the waveform table. I have the XControl work, with a ring filled automatically with the NI_ChannelName of the input waveform array fields and the value of the ring being used to index the waveform table to select the appropriate data.

  What I want to do next is automatically set the value of control of ring in the XControl to the value that the user has selected the last time he ran the VI that uses the indicator. However, the properties of the control ring do not seem to be accessible from the VI that uses the XControl, and none of the XControl General properties seem to be accessible from the front VI in the XControl. The value of the ring is not part of the entrance of DataIn cable waveform table, so I don't have a good method to pass data to the control of the ring outside of what is in this table of waveform. I might add the value in the waveform table, if this helps, but indicators XControl do not transmit their return DataOut appellant VI to allow me to record the user selected value.

  Is there a good way to read and write the properties of façade elements in an XControl of VI that uses the XControl?

  I apologize for not posting my code; the computer with LabVIEW license is having network problems at the present time. I'll post the code when I can.

  Thank you!

  Erik

  In your State cluster typedef container, include a reference to a control of the ring.

  In your vi of façade, in the case of change of Direction, create a reference to your ring and connect to a plan by which he sends out the view state.  Also be sure to write true to the status changed in the result of the Action.

  In your xctl, select New-> property.  Name it after the property in the ring that you want to access.  Use the view clustered State (in your new property VI) to access the reference to the ring; son of a property node.  Change the control value in the appropriate type & connect to the property you want.

  Be sure to connect the path error through everything that might cause an error.

  When you drop an instance of the xctl and create a property from this node, your new property will be available.

• I noticed that many of my updates there is 2 times. The same exact. Can I safely delete those that are lined and exactly the same thing? Seems I don't need the same exact 2 and 3 updates times.__Thanks__Michael

  I noticed that many of my updates of widows is 2 times. The exact same ones. I can safly remove those that are lined and exactly the same thing? Seems like I don't need at the same time exact windows updates 2 and 3.
  Here's what are installed now that confuses me.
  Running vista Home premium
  version 6.0.6002 Service Pack 2 Build 6002
  PC x 64
  Intel Core 2 Duo CPU T5550 1.83 GHz, 1833 MHz, 2 Lossnay, 2 Log
  4.00 GB
  Microsoft Silverlight
  These files were add and remove.
  Update for Microsoft Visual C++ 2005 ALT kb973923 - x 6...
  Update for Microsoft Visual C++ 2005 ALT kb973923 - x 8...
  Microsoft Visual C++ 2005 Redistributable
  Microsoft Visual C++ 2005 Redistributable
  Update for Microsoft Visual C++ 2005 ALT kb973924 - x 8...
  Microsoft Visual C++ 2005 Redistributable - x 86 9.0.2...
  Microsoft Visual C++ Run Time Setup Lib
  Would it not be better to uninstall all these and start from scratch with Silverlight?
  Or!
  To uninstall only some?
  Very confused about this.
  Some tips would help a lot.
  I think I posted all the files that were related to this as well as information on the system.
  Thank you
  Member of 1care Michael B.

  Mike

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/b9132e0a-31ad-4f3c-af7d-8719972453ab

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Try to load Quick time. All goes well until I get "administrator has set policies that prohibit the installation of this program.

  original title: rules of the administrator

  Try to load Quick time.  All goes well until I get "administrator has set policies that prohibit the installation of this program.

  I am the system administrator, logged as such, can't find a way to change these policies of 'administratoer' to allow me to download and install a program that I want to install!

  Hi J1walters,

  ·        The computer is connected to a domain network?

  ·        Which edition of Windows vista is installed on the computer?

  ·        You are able to install other programs outside of Quicktime?

  However, you can try the steps below and check if it helps to install Quick time.

  Method 1

  a. open the location of the downloaded program.

  b. right click on Setup.exe or install icon.

  c. click the run as Administrator option.

  Check if the program is installed.

  Method 2

  Try to temporarily disable control user account (UAC) on the computer and try to install the program and check if he moved very well. Subsequently re-enable the UAC settings after installing the program.

  Access the link below to see how to enable and disable the UAC settings.

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• Installed Sonic RecordNow DELETE. Ste 7.0, but the program says that my readers arwe set to 'off '. They are not. What's wrong?

  Program installed but starts it gives the error that my readers are set to disabled. (DUH!) My drives are NOT set to off. I know that the program is not compatible with Win 7 (element DLA not install), but it is not necessary to start the program.

  So, what's the problem?

  Duplicate thread:

  I have a problem with RecordNow 7.0.

  When I run the program, I get a message that says that my drives are set to disabled. they are not. I had this problem before and resolved, I think, by installing the latest PX engine update. This time, however, that has not worked. Any ideas?

  Hello

  Given that the program is not compatible with the windows operating system 7 install the program in compatibility mode.

  Most programs written for Windows Vista also work in this version of Windows, but some older programs might run poorly or not at all. If a program written for an earlier version of Windows does not work, you can try changing the compatibility of the program settings, either manually or by using the program compatibility problems.

  To run the troubleshooting program compatibility Troubleshooter

  1. open the program compatibility problems by clicking on the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under programs, click run programs made for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

• Do stuff to PL/SQl that returns the value and redirect to modal page by setting this value

  Hello

  a button click Page1 I would perform a PL/SQL procedure that returns a value in P1_ITEMVAL and then redirect to a page 2 (modal page) and the value of an item on this page with the value previously returned. To do the same thing with a normal page is quite easy:

  Button action is present, then process of PL/SQL that returns the value in the P1_ITEMVAL element and, finally, a branch at page 2 that sets P2_ITEMVAL with P1_ITEMVAL. I really have no idea how to do the same thing when the target is a modal page.

  I created a unit test on https://apex.oracle.com/pls/apex (application 1554 - redir_to_modal)

  Workspace: tests

  USER: supporter

  PWD: supporter1234

  Any help would be much appreciated.

  Kind regards

  Pavel

  Pavel

  If you prepare a URL using the value calculated in the PLSQL of DA part you can then use a subsequent stage of javascript to set the location of the window.

  This will jump to the top of the page of the modal dialog box

  : P1_URL: = apex_util.prepare_url)

  ' f ? p ='|| : APP_ID - Application id

  |': 2' - Page id

  ||': ' || : APP_SESSION - Session id

  ||':'                      -- Request

  ||':NO'                    -- Debug

  : ': ' - Clear Cache

  : ': ' - Settings

  ||' P2_ITEMVAL'

  : ': ' - Parameter values

  || (: P1_ITEMVAL);

  then in the action of javascript

  Window.Location.Replace ($v ('P1_URL'));

  Hope this is of some use

  Concerning

  Kelvin

• I have a monitor with a resolution of 1366 x 768, when I install the CC 2015 Adobe, adobe is the resolution recommended at 1440 x 900, y at - it all the parameters that can match their set so the display can look good?

  I have a monitor with a resolution of 1366 x 768, when I install the CC 2015 Adobe, adobe is the recommended resolution of 1440 x 900, y at - it all the parameters that can match their set so the display can look good?

  Hey Boi,

  Please refer to the system requirements | Adobe Creative Cloud

  Hope that helps!

  Kind regards

  Sheena

• When you access all tasks of merger Applications home page, "an error has been received for the task manage worker research of goal setting." This task is identified by the HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS code that calls the program/WEB-INF/oracle/

  We have installed version of the Application from merger 11.1.7 HCM and CRM modules.

  It is 2 node architecture IDM IE components installed in a single node and Fusion components installed in another node.

  We are able to start the components of IDM and Fusion successfully, but when users try to access any task of merger application home page, they receive the below error

  
  

  A consumer of portlet error has been received for research of parameter task manage worker objective. Report the error details to the product owner next goal management.
  
  An error has been received for research of parameter task manage worker objective. This task is identified by the HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS code that calls the program module code fndSetup /WEB-INF/oracle/apps/fnd/applcore/lookups/publicUi/flow/ManageCommonLookupsTF.xml#ManageCommonLookupsTF. Review logs consumer and producer for details about this error.

  
  

  
  

  This may be related to your other question about "FUSION_APPS_WSM_APPID-KEY" as newspapers contains exceptions such as:

  oracle.wsm.policymanager.PolicyManagerException: WSM-02081: failed to logon to perform the requested action.

  Please refer to the document Fusion Service account password Expiration causes Portlet producer errors of Application (1486388.1) to learn how to check and set the password. There is also exception:

  javax.security.auth.login.FailedLoginException: [Security: 090302] authentication failure: User FUSION_APPS_PROV_PATCH_APPID refused

  This is probably caused by an expired password, please see Fusion applications servers are not in - password policy error: 9000: GSL_PWDEXPIRED_EXCP: your password has expired (1629927.1).

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• Where exactly the username is. I know that my ID and PW, but I can't connect to the installer of creative cloud

  Where exactly the username is. I know that my ID and PW, but I can't connect to the installer of creative cloud

  Use the e-mail address associated with your account.