That is the antivirus soft is best for ios9?

Similar Questions

• Is that what the AC adapter compatible 40Y7663 for Advanced Minidock 42W4630?

  Hello!

  I bought a 42W4630 Advanced Minidock used (P/N 42W4631, FRU P/N 42W4630, Type 2504) for my Thinkpad T400 (6474 Type) but there is no 90-W adapter with it. Due to the http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T400-advanced-mini-dock-250410U-POWER-ADAPT... I also ordered a 90W AC adapter 40Y7663.

  But I don't know if the ACadapter is compatible with the docking station. I have not found a suitable compatibility list.

  You have an idea if the power adapter is compatible for my docking station? What would happen in the worst case?

  This adapter works because it's the type of adapter supplied with the advanced mini dock.

• Is there a virus that causes the "cannot find server" message for any website?

  Having had no problem at all with firefox, after that my brother found himself on a "questionable" site that has closed the browser suddenly, any time I opened my browser to look at any page on my home pc I got the message 'server not found '. My laptop and phone are sailing very well without any problems. Thanks for your help.

  Make a check of malware with a few programs to scan for malware.
  You must use all of the programs, because each detect different malware.
  Make sure you update each program to get the latest version before doing a scan.

  http://housecall.trendmicro.com/ - Trendmicro online

  http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware

  http://www.superantispyware.com/ - SuperAntispyware

  http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free

  http://www.Microsoft.com/Windows/antivirus-partners/Windows-XP.aspx

  See also for a rootkit TDSSKiller infection.

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Thanks again

• If I put more lower memory card on a computer that has the memory card fast (just for the diagnosis of scenario) can damage the computer?

  Hello

  If I put a memory ddr3 or ddr2 has a speed lower than the an origin whch is on the motherboard (just to diagnose the scenario), which would damage the computer?

  Thank you

  Johan

  Hi Johan,.

  DDR2-400 has a transfer rate of 3200 MB/s. DDR2-533 has a transfer rate of 4266 MB/s.

  High speed DDR2 DIMMS are compatible with low speed DDR2 DIMM, although the motherboard or controller memory CPU will be bound to the limits of the low-performance modules.

• Which IE Tab extension is the last/best for FF 14 +?

  The library contains several IE Tab extensions. Their names and version numbers do provide no clue about what is the most recent or best for the current versions of FF. I just found out I have 3 extensions of IE Tab. Should I not I need one? Which one?

  https://addons.Mozilla.org/en-us/Firefox/addon/IE-tab-2-ff-36/?src=search

  Seems to have the best user reviews lately.

  BTW, not the best idea to have several similar modules installed, even if only one is enabled at a time. If you are looking to test and compare similar modules you use better separate Firefox profiles for each.

• Problem with the new sizes of icons for iOS 7 while that submitted to App Store

  Hello

  I have compiled my AIR application that includes the new sizes of icons for iOS 7 (76 x 76, 120 x 120, 152 x 152 and the Spotlight search result 40 x 40 and 80 x 80 icons) from the command-line using AIR 3.9. Here is the section of the icon of my XML application descriptor:

  <>icon

  < image29x29 > icons/icon29x29.png < / image29x29 >

  < image48x48 > icons/icon48x48.png < / image48x48 >

  < image57x57 > icons/icon57x57.png < / image57x57 >

  < image72x72 > icons/icon72x72.png < / image72x72 >

  < image114x114 > icons/icon114x114.png < / image114x114 >

  < image512x512 > icons/icon512x512.png < / image512x512 >

  < image58x58 > icons/icon58x58.png < / image58x58 >

  < image144x144 > icons/icon144x144.png < / image144x144 >

  <!-icons additional app for iOS - 7 >

  < image40x40 > icons/icon40x40.png < / image40x40 >

  < image76x76 > icons/icon76x76.png < / image76x76 >

  < image80x80 > icons/icon80x80.png < / image80x80 >

  < image120x120 > icons/icon120x120.png < / image120x120 >

  < image152x152 > icons/icon152x152.png < / image152x152 >

  < / icon >

  App (.) IPA) is installed and works very well in all the all devices (Ipad, IPhone). While submiting the same application to Apple's App Store with app store available profile, I received three warnings. Those are the following:

  (1) ITMS-9000 WARNING: 'Missing recommended file icon. The package does not contain an icon of the app for iPhone / iPod Touch exactly 120' x 120' pixels, in .png format. "to SoftwareAssets/SoftwareAsset (MZItmspSoftwareAssetPackage).

  (2) WARNING-ITMS-9000: 'Missing recommended file icon. The package does not contain an icon of the app for iPhone / iPod Touch exactly 76 "x 76" pixels, in .png format. "to SoftwareAssets/SoftwareAsset (MZItmspSoftwareAssetPackage).

  (3) ITMS-9000 WARNING: 'Missing recommended file icon. The package does not contain an icon of the app for iPhone / iPod Touch exactly ' 152 x 152' pixels, in .png format. "to SoftwareAssets/SoftwareAsset (MZItmspSoftwareAssetPackage).

  Can someone help me?

  3.9.0.960, who was transferred recently.

  -Pahup

• Desktop HP Pavillion Mini: unify dongle that connects the wireless keyboard and mouse on the HP Pavilion Mini Office

  I bought the product online at Amazon.com. I lost the unifying dongle that connects the keyboard and mouse wireless for the mini PC. No knowledge of a store selling the usb dongle online in the USA? Here is the data on the area where the mouse: model number: MG-1451 / 1452-RG, country of origin: China, identification number of the KCC: IPMPC-CRY-HPK-MG-1451 and IPMPC-CRY-HPK-RG-1452. Help, please. Thank you.

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.
  If you are unfamiliar with works as a private of the Forum messages, this post has instructions.
  http://h30434.www3.HP.com/T5/first-time-here-learn-how-to-post-and-more/how-to-check-your-messages/TD-p/3547355

• Antivirus soft

  My Acer has been infected by the "Antivirus Soft" malware and I don't know how to remove it.  Help, please.

  Follow the instructions to remove Antivirus Soft:
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-soft

  http://deletemalware.blogspot.com/2010/01/how-to-remove-antivirus-soft-fake.html

• TMS (driver) reserves of the current CTC of resources for future conferences

  Hi all

  Can someone confirm how the CTC works with TMS regarding the control and booking resources? There are also some questions long to answer...

  From my experience, after you have created a conference TMS is communicating to the CTC.  CTC verifies resources (log messages: "device.query";) "participant.enumerate") and reserves (all the time: since the moment of creation until the Conference ends). This period reservation comes from problems we have with the planning of future conferences (not all logs or statistical).

  Is it possible to control the resources reserved on the CTC? How to enable the CTC to oversubscribe? How do resources reserve TMS - CTC ONLY for the period of time conference planned and not to the creation period time up to the end of the Conference?

  I read in the documentation, that if the MCU is dedicated only for the scheduled conferences, then resources are reserved ONLY for a regular conference time (no this time, it was created). If anyone can confirm?

  How to divide microcontrollers for a group of 3 MCU for scheduled conferences and one for Ad-hoc?

  Thanks inn advance for the replies and advice!

  Without specifying ports content dedicated to the conductor, when a content port is used at a conference, conductor will see that as a video port use when the MCU actually uses a dedicated content port.

  Ports to limit the number of regular participants, deadline just the Conference to allow than those that have been planned in SFT, others who might try to join will not be able to.

• Which of the many Adobe products best fits my idea of greeting card?

  Hi all and I apologize in advance if this seems to be a really naïve question, but I'm a complete noob. I have a small online store that sells continental antiques and what I wanted to do was to reproduce and sell old vows or vintage cards. My problem is that I like cards in foreign languages and being old maps are a bit shabby around the edges.

  I am looking for a kind of desktop Publishing adobe software that would allow me to a) resize maps, b) slightly change the colors of the cards and c) reprint real greetings in a foreign language, in English, but in the same fonts and finally, c) that would allow me to reset the slightly torn edges and clean foxed in those white lines.

  Adode do so many things and some software costs hundreds and hundreds. As a small merchant, I want something good enough to perform the tasks above, without the unnecessary fancy stuff.

  Also, can anyone recomment a suitable canon or epson printer that makes the fantastic details and brightly for up to 300 g/m² greeting cards, without costing the Earth

  If you guys could give me the benefit of your experience, I would be extremely grateful. Unfortunately, there is a huge amount of deskstop edition of the "stuff" out there, but I'm at a total loss as to how to work what is good for me.

  Huge thanks in advance :-)

  x

  From your description, I understand that the main part has to do with the restoration of the greeting cards. This means that you first need an image editing program. The program should also be able to work with text.

  To not make it easier for you: there are many programs that can it needs. You can set with Adobe Elements (in this case, Photoshop CS6 or CC is an overdose) but there are also programs such as The Gimp, which is free to use.

  I guess others here on the forum can come up with more appropriate solutions.

  The main point is that perhaps you should not opt for an expensive package but rather invest time learning how to use the software for your publishing goals.

• my pc cannot accept the installation of antivirus, it shows that the system is not suitable for running ms Dos and ms windows app com help me install

  my pc has failed to install any antivirus it shows that the system is not appropriate for the execution of ms - back and ms windows application help

  Hello

  problems to install your anti-virus software, contact the manufacturer of the anti-virus

  also scan for Malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• What that look the best programs to download & burn videos net flv on disc for TV?

  I.ve tried * FS (Free Studio), * Free Video to DVD Converter & * Free DVD video burnr; Yet, I can't Burn flv file Types from my ' Video-favorites-lists ' compiled separatelyof love YouTube, Daily Motion, Metcalf , etc... I don't get that jump - comes up telling me that these "File Types" are not supported for IO to be burned to disc... I have a whole list (roughly a 150) of short flv videos compiled on "RealPlayer" of all sources of the internet; &, although most have downloaded & replay on RealPlayer - they don't burn to DVD for TV-play Ultimate unless I have buy "RealPlayer Plus" for an another $40.00

  Any suggestion would be appreciated... I might even consider the $40. Purchas, if I thought for sure it would work on all the stored (?) of RealPlayer videos... However, I still would not have found a way to burn to disc the "favourite lists" of Dailymotion or Youtube, etc... In addition, frankly my hope is that there is already a free affiliate program w/Windows 7 that would easily deal with this conversion (!)... Pls help me out here; some of these vids have sentimental value clear!  -Much appreciated, Steve

  I.ve tried * FS (Free Studio), * Free Video to DVD Converter & * Free DVD video burnr; Yet, I can't Burn flv file Types from my ' Video-favorites-lists ' compiled separatelyof love YouTube, Daily Motion, Metcalf , etc... I don't get that jump - comes up telling me that these "File Types" are not supported for IO to be burned to disc... I have a whole list (roughly a 150) of short flv videos compiled on "RealPlayer" of all sources of the internet; &, although most have downloaded & replay on RealPlayer - they don't burn to DVD for TV-play Ultimate unless I have buy "RealPlayer Plus" for an another $40.00

  Any suggestion would be appreciated... I might even consider the $40. Purchas, if I thought for sure it would work on all the stored (?) of RealPlayer videos... However, I still would not have found a way to burn to disc the "favourite lists" of Dailymotion or Youtube, etc... In addition, frankly my hope is that there is already a free affiliate program w/Windows 7 that would easily deal with this conversion (!)... Pls help me out here; some of these vids have sentimental value clear!  -Much appreciated, Steve

  ======================================
  Have you tried Windows DVD Maker, which is included
  with Windows 7? If you format compatibility issues...
  You may need to convert the video files to the. WMV format.

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

  Also... DVD Flick has not been updated for a while but
  might still be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD-flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Tutorials:

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• Someone at - it advice so that the app is best for me?

  Hey people! I need to recolor the portions of photographs, layers can cut parts of photographs and see the layer behind, so that to shoot photographs. It is for professional use.  I use Pixelmator now, but I don't get the results or ease of use that I want.  Do I have to buy all the Apps in the PS for all the functions in the above sentence?  I also want to rethink my business logo using photoshop. I am not opposed to spending money, I don't want a ton of stuff I won't use.  Please let me know if there is any advice out there.  Thank you.

  The $ 10/month is the plan of photographers on an annual basis. The search in the list of features of Pixelmator, all you named should be possible here too.

  I suggest you first make the trial. Look at the first beginner tutorials: CC Photoshop tutorials | Learn how to use Photoshop CC

• how spyware &amp; best for macbook pro antivirus software

  e-mail account hacked. possibly get password spyware or virus vi somehow, I downloaded on my Mac. What is best spyware / virus scan software for MacBook Pro (El Capitan 10.11.5 running OS X version)

  What makes you think that you have been 'hacked '?

  Download and run MalwareBytes. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.

  There are no viruses that can attack Mac.OS X. For example, anti-virus programs are selling a cure for a disease that does not exist. And they are known for the Mac was systems.

  A Mac peut picking up malware, but not if you just use common sense. Really need to actively invite some malware in for making it happen. This means that download and knowingly give your password for it to download. Mac offers all the protection you need with SIP (Protection of the integrity of the system). I have on the Protection of the integrity of system on your Mac - Apple Support

  If you happen to download adware, you can use MalwareBytes to get rid of it. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software. If you use torrents, don't. Torrents are a good way to pick up malware because something can to hitchhike in on a download.

  Safari pop ups are different and easier to deal with. In Safari 9.1 and later simply close the window. For previous versions force quit and hold the SHIFT key while restarting Safari.

  https://support.Apple.com/en-us/HT203987

  Finally, away from programs that are intended to «clean your Mac» They can do damage to your system. Your Mac should any in the first place of cleaning. Any necessary cleanup is systematically supported by OS X.

• I use my MacBook Air as a desktop computer. Should I leave the charger plugged all the time or should I drain the battery and then recharge? What is the best for the battery?

  I use my MacBook Air as a desktop computer. Should I leave the charger plugged all the time or should I drain the battery and then recharge? What is the best for the battery?

  Keep the computer plugged in whenever possible.

  If you keep the computer always connected, make sure that at least twice a month

  Run it on battery until battery charge level falls to about 40-50%.

  Please don't completely discharge the battery. Discharge the battery completely will reduce wear and tear on the battery.

  For more information:

  Section: To optimize the battery life

  http://support.Apple.com/en-us/HT204054

  Citing at the bottom of the linked article.

  "The question is often asked:" should I disconnect my laptop from the mains when not in service? Under normal circumstances it should not be necessary because as soon as the lithium-ion battery is full, a properly functioning charger will stop the load and load the pad will only engage when the battery voltage drops to a low level. Most of the users do not remove AC power, and this practice is safe. »

  http://BatteryUniversity.com/learn/article/bu_808c_what_the_user_can_do