That means in fact "analysis of the system recommended?

Similar Questions

• Why do I get a message saying 'you are running an operating system that InDesign can't. See the system requirements for a complete list of the supported platforms. » ? What does that mean?

  Why do I get a message saying 'you are running an operating system that InDesign can't. See the system requirements for a complete list of the supported platforms. » ? What does that mean?

  This means that your machine does not meet the requirements of system for InDesign.  Check the system requirements for InDesign against those of your machine to see where your machine is delivered in default.

  InDesign - http://helpx.adobe.com/indesign/system-requirements.html

• Is there a process or program that I can use to restore the system and configuration of the system to the original

  Hello

  I would like to know if there is a microsoft tool or a suggested list of Microsoft that could help me restore the system and the system configuration files in the appropriate State. is not the restoration of the system. I don't know of retoring my computer to an earlier time, nor on the restoration of computer purchase. 

  I thought that my computer has been compromised in some way, and the intruder was accessing my unit via some sort of connection distance.

  I received the support of the malicious software company, and I think that my computer is fine now.

  And so the question with which I opened this post: I would like to know if there is a Microsoft tool or a suggested list of Microsoft that would help me to restore the system and the system configuration files in the appropriate State. I'm not taling about system restore. I speak not of retoring my computer to an earlier time.

  Whenever I start to notice the strange behaviour of my computer, I would like to launch this program and follow this procedure to reset all the settings and files to a suitable State. The reason why run alone to detect malware problems, and that if there is remote access to my computer inadvertently, the intruder can do a lot of editing of files which is not identified by the malware. and I believe that if I was able to run a program like this, all the changes took place, which expose my device, but the rules of behavior systems can be reversed for a proper state.

  I read an article on how to repair my operating system, but it forced me to get a copy of it; However, given that the supplied operating system with preinstalled on this computer, I could not follow the instructions. Article I read to all system and configuration files that meet the standards of the manufacturer, without losing files and installed programs.

  Thank you

  Hello

  Already, you mention that you can do; either a repair installation.

  "How to do a repair installation to repair Windows 7"
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  And make sure that read you all the information under 'warning'.

  It also tells you what drives you can and cannot use to do.

  ________________________________________________

  You can use this to fix the corrupted system files.

  "Command SFC/scannow - System File Checker.

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  «Use the System File Checker tool to repair missing or corrupted system files»

  http://support.Microsoft.com/kb/929833/en-us

  But if SFC detect serious errors in the file system, you may need to do a repair installation as in the instructions in the first part of this answer.

  See you soon.

• Said computers that windows could not connect to the system event notification service

  Said computers that windows could not connect to the system event notification service. Does not connect as an administrator.

  I played the system restore. Solved the problem, but why did it happen?

• I have a purchased copy of PhotoShop Elements 9.  When I run it now I get an error message - error: 213:19.  What does that mean?  How to use the software I paid?  Thanks a lot for your help!

  I have a purchased copy of PhotoShop Elements 9.  When I run it now I get an error message - error: 213:19.  What does that mean?  How to use the software I paid?  Thanks a lot for your help!

  See here:

  In Photoshop Elements license error

• my computer recently crashed and when I tried to use photoshop, then I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  My computer recently crashed. A fixed it but! When I then tried to use photoshop I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  Update or restore your graphics driver.

• I had to change my computer (too slow), I'm trying to reinstall Adobe Acrobat 9 Pro. I have a serial number that is not an upgrade, but the system ask me a previus serial number which I don't have

  I had to change my computer (too slow), I'm trying to reinstall Adobe Acrobat 9 Pro. I have a serial number that is not an upgrade, but the system ask me a serial number previus wicht I did not

  Acrobat 9 pro serial number you use is an upgrade by also the installer would not be asked to select the previous (for example, acrobat 8) version.

  If you are allowed to choose acrobat 7 as the upgrade, you may be able to use the serial number, error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

• I am student discounts 1 year full-time that means I can't get the student?

  I am student discounts 1 year full-time that means I can't get the student?

  Hello

  Please see student software discounts, eligibility student | Adobe

  Hope that helps!

  Kind regards

  Sheena

• activate my membership and paid for it as well, but the creative cloud app shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been

  I activated my subscription and paid for it as well, but the creative application cloud shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been activated?...

  Kindly Contact customer and details of payment verified. [Make sure that you are connected to the Web site with the valid Adobe ID under which the product is licensed].

  
  

  
  

• Drive CD/DVD not visible in BIOS, Device Manager or Windows Explorer - only during the analysis of the system.

  Until a few days ago, this problem didn't exist - I know.  My CD/DVD drive is no longer recognized in Windows Explorer, BIOS or Device Manager.  It doesn't, however, appears briefly in Windows Explorer in the analysis of the security of the computer.  It allows to open/close, etc.  and when it is visible, I am able to open the drive and see the contents of the CD.  Then it disappears again.  The light flashes indicating that he works and I can hear it trying to read the CD.  I uninstalled iTunes because I read somewhere that this may have been the issue - but that didn't work.  I tried the system restore, registry cleaners, removal of upper/lower case filters from the registry, used the program Fixit found on the site Web of Microsofts etc and still no luck.  Any ideas?  The computer is a gateway SX2850 (?) with Windows 7 Home Premium installed.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Okay, so my problem is that Disk Defragmenter, disk checking and the system restore will not work.

  I tried to go to the c drive and right on it and going click Tools then error checking, but it did not work. I tried dfrg.in and right click to install. I tried to use cmd fixes, I found on the net. I tried a lot of bugs, but nothing helped. Any ideas? Thanks for your time. Here are some links with difficulties, I've tried. I don't know he said that my c drive is dirty my c drive is mt RAW disk fnctions used due to the command chkdsk/f.

  http://www.theeldergeek.com/forum/index.php?showtopic=28251
  http://www.andreasroom.com/blog/archive/2004/01/18/Defrag.aspx

  xador,
  If you start the command prompt and run Chkdsk/r you get an error right then or after restart and tries the kick-off of the check?  What is the error message you get?  You have all the maintenance of the system or registry cleaner program installed or running?  You have your running antivirus software?

  Let us know. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Analysis of the system.

  Free Edition Avira Antivirus starts to scan and about 14% of what the whole system hangs until I manually closed.

  Free Edition Avira Antivirus starts to scan and about 14% of what the whole system hangs until I manually closed.

  try using scan

  http://www.Malwarebytes.org/ and http://www.surfright.nl/en the TWO RECOMMENDED

  http://www.systweak.com/AntiSpyware/

  IF THAT DOES NOT SOLVE THE PROBLEM THEN

  prepare your computer to clean boot, by typing msconfig in Start menu and then pressing on enter then disable all startup items and no services windows then reboot, see if it makes a difference?

  IF SHE DID THEN GO BACK AND SEE WHAT CASUED A PROBLEM? RE-ENABLE THOSE YOU REALLY NEED!

• That means managers when setting using the workspace

  Hi Experts,

  My client is using bpm12c, they asked if the administrator sets the managers in the workspace-> administration-> organization unit-> managers (in the right-hand panel), does that mean actually, it auto generate relationship report for members of the org (and org subunit) unit?

  Best regards

  Good idea for the reporting of organizational unit, but there isn't.

  As you know, you can associate an OU with a process so that only individuals and groups within the organization or its hierarchy can work on tasks for this process.  I've never tried, but adding a handler to an OU that nobody (or group) can then have access to instances in the processes associated with the organization unit.

  Dan

• Windows XP stops by a complete analysis of the system

  Under Windows XP. Whenever I try to run a full scan of the computer system will stop. This occur during execution of Microsoft and Norton full scan of the system. Must unplug computor and reboot several times, sometimes over an hour so he could restart. Also from time to time get notice High CPU. Made a lot of getting the ride of the files, history, Favorites, trash, etc. Must have viruses - anyway to solve the problem?

  uptom

  Under Windows XP. Whenever I try to run a full scan of the computer system will stop. This occur during execution of Microsoft and Norton full scan of the system. Must unplug computor and reboot several times, sometimes over an hour so he could restart. Also from time to time get notice High CPU. Made a lot of getting the ride of the files, history, Favorites, trash, etc. Must have viruses - anyway to solve the problem?

  uptom

  Try more powerful on line scanners or a restoration of the system at an early happy time

• Adware that remains even after reinstallation of the system

  Hello

  Some time ago I noticed a strange behavior while searching Google. He keeps asking my computer and other computers in our home network to enter captcha. Later, I noticed that I have other Google ads on multiple websites. There are even ads on http://euronews.com/ . Furthermore, I see these ads in all browsers on my Mac only - ads are not displayed on the Windows computer connected to the same Wi - Fi. I have the same problem if I am connected to an another Wi - Fi.

  I tried all the forms of Internet tips to remove the Adware from Mac - nothing works. Yesterday, I deleted the hard drive and reinstall the Mac operating system... and the ads are always display (again, no advertising on the Windows computer).

  

  

  Could someone please explain to me how this is possible? Thank you in advance.

  Ivan

  I don't think that there is no adware involved: I see the same ads on Euronews. So either they are specific to Mac users, or your Windows computer has an anti-ad. (The latter will also solve your problem on the Mac.)