Windows XP stops by a complete analysis of the system

Similar Questions

• Computer stops when I run a program as a complete analysis of the Norton System or a program to convert video.

  When I launch a program like the complete analysis of the Norton System or a program to convert video on a DVD from my computer stops without warning.  Yes, I cleaned and blew all the dust inside.  Y at - it a program that will monitor the heat inside that is compatible with Vista?

  Hi, what type of program you use to convert video?

  Also, take a look at the following site Web de Norton:

  http://community.Norton.com/T5/Norton-360/full-scan-shuts-down-or-freezes-my-computer/TD-p/469270

• When I click on anything it either in the Outlook Express Preview window to stop answer and I have use the ctrl-alt-del combination for her all over again.

  When I click on anything it either in the Outlook Express Preview window to stop answer and I have use the ctrl-alt-del combination for her all over again. Anyone out there have the same problem? If so what did you do about it.

  Original title: I'm under Oulook Express 6 Windows XP Home SP3 environment.

  Bruce:

  The problem has been fixed (I think) but in a most unusual way. Let me explain.

  When I was closing down to give the computer a rest yesterday, there was a pop up saying that vprotector expected to close. He really wanted the process of closing until I clicked on finish the process. Curious to know what vprotector is, I searched on the net and got a lot of shots, saying: it is a virus and should be deleted pronto. So I searched the hard drive for the vprot. * and found in the folder program files for AVG!

  I then went to AVG to see if it's really a part of AVG and they said yes. If there is a problem with vprot, the toolbar is at fault and needs to be reinstalled. There was one click here to download and run the part of the program to fix the problem. However, I had WebRoot antivirus running that stopped the download of this program as a virus. Because I trust AVG, I've disabled WebRoot and reinstalled the AVG search bar.

  I haven't restarted WebRoot and computer flying along as it should, and OE is the link to IE when I click on a link as it has always done.

  Seems to me to be the faulty AVG toolbar and a cross with two virus programs upward was at fault. Thank you for your time. Your reply gave me a chance to think differently this problem could arise.

  Computers are really complicated machines and we have to be complicated to deal with their problems.

  Thanks again,

  Fred

• Backup Windows XP to create the complete image of the system?

  Original title: Windows Xp backup for the new update to reader.

  I want to get a new larger internal hard drive.  However the idea of trying to reinstall all my programs and settings have discouraged me it doing so. My Mac is great in that it allows me to back up my entire system with time machine on an external hard drive, and I can put it all right even if I accidentally erase my whole machine.

  Window xp Backup Wizard can do the same?

  Under the Backup Wizard tool, it seems to be a selection that says that "all information on this computer.  So once I have replaced my old internal drive with the new and improved, can simply paste in my external drive in the USB port and reinstall everything as it is?  is this possible?

  I realized with the technical stuff you just can't assume anything and that things go wrong or you need something more...

  Hi Yes,

  This isn't the functionality of Windows XP. However, you can find this feature in Windows 7.
  Win 7 backup and restore: complete Image of the system expects a full recovery of the system easier if there is a hard drive or a computer failure.
  For more information, see backup and restore: frequently asked questions

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I got an answer from Microsoft after a "windows has stopped working" I have to delete the virus Win32/Small.CA.

  Original title: Win32/Small.CA

  I got an answer from Microsoft after a "windows has stopped working" I have to delete the virus Win32/Small.CA.  I ran the security scan and the answer was "no viruses or malware found."  Could someone tell me how to deal with a Win32/Small.CA and how to determine if I really get it.  Thank you.

  Hello
  Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• Error message: Windows Media Player could not complete burning because the disc is not compatible with your player...

  I have one of the same type of disc engraved the other day without problem. Tried to burn a CD today the progress achieved 99%, then I got the error message. Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.

  Hi David,

  Thank you for giving us the opportunity to help you with this problem.

  According to the problem description, you were not able to burn a DVD with Windows Media Player.

  You get the error that the disc is not compatible with your drive.

  Let me ask you a question.

  (1) what is the type of DVD or CD you want to create?
  (2) don't you make changes to your computer before this problem?

  I would suggest a few troubleshooting methods. Run the Windows Media Performance troubleshooting tool and follow the steps in the link to burn a CD or a DVD.

  Method 1: Run Windows Media Player Performance convenience store.

  Please follow the steps below to do so.

  (a) key Windows + W keys on your desk.
  (b) write the Troubleshooting in the search box in the upper right.
  (c) select the Troubleshooting option after the search.
  (d) select the option of Performance of Windows Media Player .
  (e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.

  Method 2: Follow the steps in the link here and burn the CD or DVD.

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

  I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.

• How to restore Windows Safe Boot to Normal of startup using the System Configuration?

  Hello
  I changed my home base boot of windows vista in safe mode of configuration of the system by mistake, windows tries to start in safe mode, but does not start, now how can I return windows to boot in SafeMode the normal start?
  Thank you.

  Hi Muhummad,

  Please contact Microsoft Community Forum.

  I understand that you are unable to start your computer in normal mode.

  I will certainly help you in this matter.

  Please follow the methods.

  Method 1:

  Please complete the restore of the system of the environment of Windows Recovery for the date and time when the computer was working fine.

  See the link.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-in/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2:

  Follow the steps in the link.

  http://Windows.Microsoft.com/en-in/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  NOTE: a custom (clean) installation of Windows will permanently delete all of the files on your computer and reinstall Windows, so only use this option if all other recovery options have been unsuccessful. After installation, you will need to reinstall your programs and restore your files from backup copies

  In case you have questions about the Windows operating system, please post on the Forum of the Microsoft community.

• Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\.config file. Error: (the system cannot find the specified file. (0 x 80070002))

  I received this notification from my last backup. Some files were not saved.

  "Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\.config file. Error: (the system cannot find the specified file. (0 x 80070002))

  Should I worry. My previous backup was cancelled and not by me.

  OT: Warning backup

  Hello

  I suggest you try the steps from the following link:

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281

• Microsoft Windows has stopped working a problem due to the closing of the program

  original title: MICROSOFT WINDOWS has STOPPED WORKING A PROBLEM CAUSE THE PROGRAM to CLOSE__

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • MICROSOFT WINDOWS HAS STOPPED WORKING
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Aries19,

  Are a. When you this error?

  B. recent changes made on the computer?

  C. when exactly do you get this error?

  D. don't restart your computer / closed applications after this error?

  Let us try these methods.

  Method 1:  [Scan sfc] System File Checker

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. click Startand type cmd in the box start the search.

  2. right click on cmd in the list programs and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command calls, the following line and press ENTER: sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Visit the following link for more information:

  http://support.Microsoft.com/kb/936212

  Method 2: Virus Scan

  You try to run a Microsoft online virus scanner and check if it detects something.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Method 3: Clean boot

  Clean boot uses a minimal set of drivers and startup programs and helps eliminate software conflicts.

  (a) click Start, type msconfig in the start search box and press enter.

  (b) under the Services tab, check hide All Microsoft Services.

  (c) under the Startup tab, click on disable all, then click Ok.

  (d) If you are prompted to restart the computer, click Restart now.

  When the computer is in a clean boot, applications and third-party services are disabled. Once the computer is restarted, check if the problem occurs right now.

  Check out this link that talks about how perform a clean boot
  Note: Follow all of the steps in the link to know what software are contradictory.
  http://support.Microsoft.com/kb/929135

  Don't forget to reset the computer in a Normal startup once find you what software is conflicting.

  Hope this has been helpful.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Update stops to take back me to the restore point

  Windows Update stops to take me back to restore point windows 7

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Family using in Windows Vista Premium 32 bit, I have error "host of transformation for Windows has stopped working" when you turn on the PC.

  Original title: Windows Vista 32-bit Edition home

  Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.

  HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.

  Nobody knows what's happening with pc or how that I should do to fix this problem.  Any help or advice will be

  appreciated.

  Thank you

  EJ

  Hello

  1. you remember to make changes to the computer before this problem?

  Method 1:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Put your computer in a clean boot state and then check if the problem persists

  Follow step 1 in the link.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:

  The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.

• Explorer Windows has stopped working when I click on the start icon

  Gud afternoon, I have 2 problems.

  1 problem is inCD.exe (which i already clear it but sure my window stopped Explorer working Isit because of this problem stop does not work)

  2nd problem is whenever I click on the icon start at the bottom left and right now I move my mouse select the icon Any1... I had to have this word says

  Explorer Windows stopped working

  Explorer Windows restarts...

  And everything is empty unless I keep trying many times.

  It happen since last night until now.

  So far, I only download Call Of Duty: Modern Warfare 2

  ISIT there is Sthing wrong download this game?

  If someone knows how to Slove this... Please help me... Thank you very much

  Hello

  Check to see if the following is useful.

  Step 1: Run the next Fixit and check if it helps.

  Problems with the overall speed of the system and performance

  Step 2: Search for the issue in a clean boot state. To do this, follow these steps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the result of clean boot.

  Step 3: Check out this thread that might have a possible solution to your problem.

  Explorer Windows stopped working

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  I hope this helps.

  Kind regards

  Ramata Thakur.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Drive CD/DVD not visible in BIOS, Device Manager or Windows Explorer - only during the analysis of the system.

  Until a few days ago, this problem didn't exist - I know.  My CD/DVD drive is no longer recognized in Windows Explorer, BIOS or Device Manager.  It doesn't, however, appears briefly in Windows Explorer in the analysis of the security of the computer.  It allows to open/close, etc.  and when it is visible, I am able to open the drive and see the contents of the CD.  Then it disappears again.  The light flashes indicating that he works and I can hear it trying to read the CD.  I uninstalled iTunes because I read somewhere that this may have been the issue - but that didn't work.  I tried the system restore, registry cleaners, removal of upper/lower case filters from the registry, used the program Fixit found on the site Web of Microsofts etc and still no luck.  Any ideas?  The computer is a gateway SX2850 (?) with Windows 7 Home Premium installed.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Computer was accidentally arrested during a complete restoration of the system to the factory settings. Help!

  OK, so I did a complete system restore to my netbook in its factory settings. Everything went well until I'm gone, and I find that the computer has been stopped during the restoration of the system. I turned it on and it loads and then displays the screen that says

  "Setup prepares your computer frst use."

  but after about 2 seconds this screen a pop up comes and says:

  "The computer shut down unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click OK to restart the computer, n then restart the installation. »

  Well I click OK and I have let it restart but then he did the same EXACT thing each time only. Please help me find a soloution because I can't my school without her wok!

  Start the full system restore process to repair what has been damaged
  on the first attempt.
   
  "hillcon2" wrote in message
  News: * e-mail address is removed from the privacy... *
  OK, so I did a complete system restore to my netbook in its plant
  Parameters. Everything went well until I left and I find the computer
  has been closed during the restoration of the system. I turned it on and it loads up and
  then displays the screen that says
  "Setup prepares your computer frst use."
  but after about 2 seconds this screen a pop up comes and says:
  "The computer shut down unexpectedly or encountered an unexpected error." Windows
  installation cannot continue. To install Windows, click OK to restart the
  computer, n then restart the installation. »
  Well I click OK and I have let it restart but then he did EXACTLY the same thing
  every time. Please help me find a soloution because I just can't get with my
  wok to school without her!
   
   

• I could not fix Windows XP Home service pack 2 upgrade. The system indicates that it cannot find a previous version of Windows installed .__I lost the previous version disk.

  Hi, I'm in big trouble.

  I just try to repair my Windows XP service pack 2/3 upgrade.

  The system asked me to save the copy, but after trying to save the computer freezes.

  I try several time to reinstall and now the system asked me to reinstall the software, I need to reinstall the earlier version of Windows that has been '2000', but unfortunately I throw away a few months ago.

  I bought a new hard drive were I have installed a new version of XP 64-bit.

  Is it possible to transfer all my documents, files, settings, etc in the new hard drive?

  All advice avaiable?

  Thanks in advance.

  CICO.

  Disconect your drive, insert your disk again as master, install Windows XP on the new drive. Once msupdate was executed and the manufacturers drivers have been installed and the sys works ok.

  Stop, connect the old drive as slave, restart

  Transfer data as needed. You may need to "take possession of records" - see victory help (donot attempt the transfer settings)