That means that a PXI embedded controller is NOT certified "operation 24/7?

Similar Questions

• Can I use PXI embedded controller connected to the PC under LINUX operating system

  Hi all

  We ara tries to connect to PXI8106 (in 1042 chassis) to PC under LINUX via ethernet (cable cross at the moment), is the version of labview 8.5.

  Can I use PXI embedded controller connected to the PC under LINUX operating system?

  If Yes, where can I find its configuration in the .ini file?

  Thanks in advance.

  Hello bachir_elec,

  I'm sending you two links that I don't provide the information you need.

  Using Linux on an Embedeed PXI controller:

  http://digital.NI.com/public.nsf/allkb/821E0C115A3B4EF286257069004B8352?OpenDocument

  Configuration of your PXI Linux system:

  http://digital.NI.com/public.nsf/allkb/5CEEC941FB7B0488862573F700653B21?OpenDocument

  You can take a look?

• Driver error issues "PCI Simple Communications controller has not a driver"

  I am trying to connect my printer, an hp deskjet 2050 printer, but I get the message that PCI Simple Communications controller does not have a driver and PCI Serial Port doesn't have a driver... what should I do?

  William

  Go to HP and download the driver, then install it.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• I had to reload XP Pro with sp3. Realtek 97 a/c, says that I need bus controller drivers. Where can I find what I need? Thank you

  I had to reload XP Pro with sp3. Realtek 97 a/c, says that I need bus controller drivers. Where can I find what I need?  Thank you

  Best places would be the site Web of the manufacturer of your computer or your motherboard manufacturer.

• Network controller is not properly understood, impossible to download anything, the diagnostic report saying that there is no driver installed for this device

  Original title:. network controller error?

  the device, network controller, is not understood correctly. report "tv_ConfigMgrErr1". Impossible to download whatever it is or it causes Internet Explore stops working. I get a diagnostic report saying that there is no driver installed for this device. It was working fine yesterday and then around 05:45, my computer made automatic updates and it was after that when I tried to download a game for my grandson and started to get in trouble. I'm no computer expert so I don't have any idea what to do.

  Hello

  1. you are using an internet connection wired or wireless?

  2. What is the exact error message you get when you try to download?

  3. what happens when you try to download the game?

  4. What were the updates that were installed yesterday on your computer?

  Check out the following link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Method 1:

  You can see the following link.

  Solve the problem of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  See also:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2:

  You see the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211

  Method 3:

  I suggest you uninstall and reinstall the network card and check. Follow the steps.

  (a) click Start and type devmgmt.msc and press ENTER.

  (b) find the network card and expand it.

  (c) right click on the Uninstall adapter selection.

  (d) restart the computer.

  Windows should install the necessary drivers.

  You can now try to install the latest driver on the manufacturing site.
  Check out the following link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• I have a VIA card mother U8668-D and in Device Manager it is said that the "Multimedia Audio Controller", "PCI input device" and "PCI Simple Communications controller" function.

  I have a VIA card mother U8668-D and in Device Manager it is said that the "Multimedia Audio Controller", "PCI input device" and "PCI Simple Communications controller" function. I posted a link to the image below.

  Nevermind, I deleted the image by accident. Oops.

  https://SkyDrive.live.com/redir?RESID=D50158D65A52CBBA! 1928 & authkey =! AKdLQ4hGMOynvnc

  If the manufacturer of the motherboard doesn't provide drivers specific win7 there is none.

  If there is the bit Vista drivers ' appropriate ness, what they would usually work

• Cannot replace the PXI embedded clock with clock oscillator PXI-6682 on PXI back plane

  I installed a module of synchronization PXI-6682 to slot 2 of a PXI-1031chassis with a PXI-8110 controller running hypervisor and RT.  The 6682 is installed on the RT system hypervisor for GPS sync during the measurements, but I would like to ask the TCXO on the PXI-1031 chassis backplane (which replaces the PXI embedded clock).  When I try to run the "Clock.vi route" that I found in the finder of the example, all I get are error messages indicating that a parameter for this operation is not valid.  The Terminal source is "Oscillator" and terminal of destination is "PXI-Clk10_In"  How can I determine which parameter is not valid?  Any suggestions?  Thank you

  Hi vugt.

  You are right that the physical switch determines which one to use and you should not have to route signals.  If you are having problems with clocks after the synchronization module 6682 please let us know!

• 1042 q with PXI 8360-controller and maps of Pickering

  Hello

  I have a 1042 q with a PXI-8360 controller chassis and some maps of Pickering.

  Connected to the XP - PC with a PCI-e-card-

  Installed is only neither Max nor-PXI, Ni-Visa...

  Now the question is how to set up the chassis in the 4.7 or max?

  In Max, I see a line with PXI system (unidentified) under "Geräte und interfaces". I tried to load some of the deliverered ini with pxi OR cd files, but I can't control anything.

  Can someone me a gibe hint what to do?

  I have doenloaded a pickering Web site pipx40vpp.zp file which should cover all my map of pickering a has also a few frontpanles.

  But at the start of the frontpanels it says "no card detected". I think I must first of all put in correct place in the max.

  Thanks for any help

  Thank you very much for the help.

  Problem is now solved:

  The main problem was that the PCIx1 slot is not working. I put the card in an another PCIx slot and then he worked at the same time.

  I found this trick here:

  http://digital.NI.com/public.nsf/allkb/05B7131814A5DDA38625710F006BB098?OpenDocument

  Try different PCI or PCI Express locations in the host PC for you MXI interface.
  The algorithm that use certain BIOS has best behavior in certain time slots than others.

  Maybe someone will need it in the future.

• Folders that I create in Thunderbird do not arise outside of Thunderbird (on the web client for my emails)

  Hello

  It's my first post because I can usually find supported using google, but I can't see any advice on this.

  Lets say I create a folder and name it 'sites' in Thunderbird, I created a rule for every email I get from stores online on their promotions go in this folder, so they do not distract the important emails, but I can view them later if I want.

  When I then log in my account outlook through their web client or if I check on my phone (which is where I'm mainly going through emails), the folders that I created in Tbird, do not show on my phone or the email provider webclient.

  I tried logging in and out of my web client and Tbird but records do not update, they remain in the Tbird but do not show in the web client or on my phone, which means that I can not read the messages held except when I home on Tbird.

  I appreciate your response.

  When your problem has been fixed, please mark the thread as "resolved".
  Thank you.
  Have a complete backup of your profile folder is strongly recommended in all cases.

• Error message appears when you try to connect to World of Warcraft. The message indicates that the System32\icm32.dll is not designed to run on windows or contains an error

  Original title: icm32.dll error message of World of Warcraft

  Error message appears when I try to connect to World of Warcraft.  The message indicates that the System32\icm32.dll is not designed to run on windows or contains an error.  This pop-up has an "OK" button that you can click, but the message appears again and again.  I am running Windows 7 Pro 64-bit and never had this problem before and I don't know how this file was damaged

  System Type x 64-based PC
  Processor Intel Core i5 - 2500K CPU @ 3.30 GHz, 3301 Mhz, 4 Lossnay, 4 logical processors
  BIOS Version/Date American Megatrends Inc. 0805, 10/11/2011

  What should I do to solve this problem.  And any idea on what may have caused the problem.

  Thank you

  Hello

  1. What is the exact full error you get when you try to play the game?

  2 have you made changes on the computer before this problem?

  Method 1:

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem persists.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  I suggest you to check the question in the clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 3:

  I also suggest that you scan your computer with the Microsoft Safety Scanner. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Note: All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

  If the problem persists, contact the game manufacturer for assistance.

• Create a model that can be replicated, but will not show changes in the original model, which occurs in any comps duplicated from it?

  I imported a doc I - 4 layers. Then I dragged these 4 layers in a new comp - comp1. I would like to reproduce this model so that I can try different things using these same 4 layers. But when I duplicate the comp I did - comp 2 - any change I make appear in comp1. How can I create a model that can be duplicated - but will not show changes in the original model, which occurs in any comps duplicated from it? Thank you very much!

  (CS5.5)

  It is a common misunderstanding when you start working in Ae. It takes time to get used to, and even veterans are still this error from time to time. Here's the thing, you have to get in your head: your project Panel is where your source material is, and the timeline is the place where there is a representation of this source. This means that if you duplicate an item in your timeline (particularly relevant for the precomps) it will duplicate a copy, not the source. so, if change you it - it will change all instances of this copy. If you want to duplicate a precomp and create another source, you will need to do it in a 4 step operation:

  1. duplicate your precomp in the timeline (you got that day)
  2. Select the source of this copy in the project Panel (currently the same precomp)-right click on the-> precomp 'reveal the source layer project.
  3. duplicate the precomp selected in the project Panel
  4. replace the copy in your panel mounting with the duplicate of the Source Panel (shortcut - Ctrl + alt + / when both are selected, or drag it to double with pressing Alt)

  what you are really duplicate the precomp twice - once in the project window and once in the timeline, and then one link to the other.

• Embedded controller

  I tried this thing over and over again nested controller, it simply doesn't train 'me '.

  I don't know why, I can get something as simple as that. I followed this example

  < fx:controller = "VBox com.foo.MainController" >

  < fx: include fx:id = "of dialogue" source = "dialog.fxml" / >

  ...

  < / VBox >

  
  

  SerializableAttribute public class MainController extends Controller {}

  Private @FXML dialog window;

  @FXML private DialogController dialogController;

  ...

  }

  Here is my code:

  App. Main.fxml

  " < AnchorPane prefHeight ="200"prefWidth ="320"xmlns:fx =" http://JavaFX.com/fxml "fx:controller =" app. MainController">

  < children >

  < button layoutX = we '126' = "90" text = "Click Me!" onAction = "#handleButtonAction" fx:id = "button" / >

  < layoutX label = "126" on = "120" minHeight = "16" minWidth = "69" fx:id = "label" / >

  < fx: include source = "InnerFile.fxml" fx:id = "innerfile" / > "

  < / children >

  < / AnchorPane >

  
  

  App. MainController.java
  

  public class MainController {}

  @FXML

  label private;

  @FXML

  private button;

  @FXML

  controller of InnerFileController private;

  @FXML

  Private Sub handleButtonAction (ActionEvent event) {}

  System.out.println ("you clicked me!");

  label.setText ("Hello World!");

  }

  public void initialize() {}

  controller.here ();

  }

  }

  I call a method of the nested controller ' controller.here ();    '

  and nullpointerexecption.

  I don't know what hurts. Some can help me please.

  @FXML injection works via the variable name, not by the type. Your name of the variable for the injected controller does not match the fx:id you used in the fx: include the tag. The rule for fx: include controllers is that if the fx:id is x, the name of the injected controller must be xController.

  Specifically, since you have in Main.fxml, you must

  @FXML

  Private InnerFileController innerfileController;

• Cannot install Flash Player as it says that I have when I'm not?

  Hi all

  On Web sites with videos I can't watch them as it says you do not have Flash player and I need to download adobe flash player. The main one I use is Twitch.tv. I click on this link to download it, but having said that I already have flash player and try the troubleshooting for Windows 10 method. This does not at all. Whenever I try to download it, it goes to this troubleshooting instead of the download page page and says he works. But it is quite obviously not. I'm under 10 64-bit windows.

  I hope you can help.

  Thank you

  First of all, check that the ActiveX filtering is configured to allow Flash content:

  https://forums.Adobe.com/thread/867968

  Internet Explorer 11 (and Edge) introduced a number of changes both in the way the browser is identified with remote web servers, and how it treats JavaScript for behavior targets specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the provider of content changes their site to conform to the new approach to development required by the modern versions of IE.

  You can try to work around these problems by using the compatibility view:

  http://Windows.Microsoft.com/en-us/Internet-Explorer/use-compatibility-view#IE=ie-11

  If it's too inconvenient, using Google Chrome may be a better alternative.

  If you have a discreet set of links that work in some browsers but not IE/Edge, links would be useful to determine if this is a content problem, flash problem or a matter of IE/Edge...

• an iPhone app that is a data base, BUT not a database of traditional who needs a server.

  As you will see with my question, I am a newbie.

  It is possible through Dreamweaver , then PhoneGap , to develop an iPhone app that is a database, BUT is not a traditional database that needs a Server.  All the info, the user will create will be stored on the phone.  If no server is required, but I need the fields drop down menu for the type of database, etc..

  Thank you

  Billy

  Hello

  If you use phonegap, then you can build your app using html5, which also means that you can use the api offline storage, which is a simple method to provide the date page so that offline, (including the use of cache manifest) and also includes the ability to use a simple database.

  See http://www.whatwg.org/specs/web-apps/current-work/multipage/webstorage.html#webstorage.

  http://www.WHATWG.org/specs/Web-apps/current-work/MultiPage/offline.html#offline

  &

  http://dev.Opera.com/articles/view/taking-your-Web-apps-offline-Web-Storage-AppCache-websq l.

  PZ

• Just bought an album &amp; download, a track that has been 'Album' only has not downloaded, but it has been purchased?

  Just bought an album & download, a track that has been 'Album' only has not downloaded, but it was purchased?

  Ive tried everything I can think off, but cannot get loaded. Tried all the usual verification, for available downloads etc. both my Mac and iphone but its does not work.

  When I view the album on Itunes, her show songs that downloaded, except this last song, which only says: 'bought', but no option to download.

  So, ive got 7/8 of an album! which is a rip off and very frustrating?

  Anyone have any ideas?

  Steve

  You and I can have a similar problem. Has been the "Skeleton Tree" album by Nick Cave and the Bad Seeds?

  I am facing the same issue. I can get the song 'Album Only' to appear in my music library by clicking on the album and then clicking on "See the complete Album." However, I still cannot sync with my iPod/iPhone, and unless I click on "Show full Album", I can't do my music library to interact with it at all (that is, if I play the full album, it ignores the song 'Album Only'). And even if I do this, I can't move it to a playlist or something like that.

  I would really like to have an answer to that as well.