That means the acronym 'BSS' for?

Similar Questions

• That means the MXML abbreviation for?

  Hello world
  
  for the moment I'm writing on my diplom thesis.
  In my fundamental element of the thesis, I describe MXML, but I can't tell the reader what the letters in MXML.
  Some of you will say 'no problem ask support', but I already did without result. I had a cat and a phone call.
  
  I already looked on the web, where I found the following descriptions possible.
  
  -Magic Extensible Markup Language
  -MX Extensible Markup Language (because of Macromedia MX products)
  -Macromedia FleX Markup Language (which I think is the right one)
  
  Maybe he's the one who has the right description.
  
  Concerning
  
  Jeffrey

  Hey

  If you read the wikipedia article (which I believe you can trust) it is that Adobe has no official meaning of the acronym MXML.

  See you soon

  Dietmar Paulus

• That means the abbreviation DWT for?

  The models have a TPL file type. Does that mean that dynamic Web template, or model DreamWeaver?

  Of course, it does not matter, but I'm asking as a curiosity.

  In the case of dreamweavers means model dreamweaver.

  In Expression web (and web visual studio etc.), this means a dynamic web template.

  PZ

• That means the small arrow on the desktop icons?

  That means the small arrow on the desktop icons?

  It designates the actual icon ' points to ' (or is a shortcut to) the actual file. You can create a shortcut to a file or a folder by right click, then click on "create shortcut". If you delete the shortcut, the original file is not removed.

  For more information, see:

  http://en.Wikipedia.org/wiki/File_shortcut

• That means the AHCI Mode, Mode RAID & SATA IDE Mode in the BIOS settings means

  That means the AHCI Mode, Mode RAID & SATA IDE Mode in the BIOS settings means

  My computer is having problems when I bought all first it was from another provider which came as a set overclocked PC up the unit everything needed had to be put in my case & add existing hard drives & DVD etc. readers added on the implementation. I used the same location for more than 10 years before that I always built them myself I can build a good setup computer I correspond to different parts inside each other, and then he tested & sent.
  Unfortunately, the store has closed & the owner is sick cannot get their hands on him more & I had to get some add on things like new SSDS & some other bits in my system & the young boy said he would could do this job, but everything went wrong & I lost all new so I decided to recycle me like I used to do it before windows 7-64 came out I was going through a rough patch with me being paraplegic in any case it is difficult to build a new PC, so I chose this store & their confidence that went wrong now & I've been research & learn to catch up with the new technology, I do what I do anyway.
  Thing is my system is never one that you can purchase a manufacturer & I left it with the young boy & it came out all memory & was not necessary but of course upset of that ruined the setting completely overclocked so I did it myself & I got the work faster than ever, & quieter PC I just got the score that he had now , so I'm happy with it, but the names I came across while overclocking I came across that I'm not average or really lot as were dealing with Fast CrossfireX DDR RAM 1600 MHz.
  Please don't tell me that I should not be messing around with what I made since 1989 & made great strides in how everything works, I am not aware about this sort of thing I know SATA what it is & done, but those responsible for setting came from the part of overclocking in the BIOS I put then correctly , but I wanted to know what they represent in more depth. Thanks to anyone who can put me wise on these 3 points only. Malcolm.

  I'm pretty sure that you are on the wrong "forum" for this type of topic. This forum is designed as a support Pro-type Surface ultrabook/tablets and tablet-like Surface.

  That said,

  AHCI - Advanced Host Controller Interface - this is a hardware mechanism that allows the software to communicate with the devices Serial ATA (SATA). It offers features such as connecting hot and native command queuing (NCQ).

  IDE - Integrated Drive Electronics - IDE is basically the 'old' version of AHCI without connection to hot and NCQ. (It is usually used during the era the Parallel ATA (PATA) hard drives)

  Now. Mode AHCI and IDE mode - what is - this? IDE mode is to give you the greatest compatibility with older operating systems. AHCI is as I mentioned above, a modern version of the IDE - use the AHCI mode if you are running recent operating systems (Windows Vista + and Linux kernel 2.6.19+).) IDE mode will allow you to connect older operating systems with SATA drives.

  As I mentioned above, SATA is Serial ATA and the replacement of hard drives Parallel ATA (PATA).

  RAID - this is a storage technology where combine you multiple disks in a unit of 'single', depending on the mode, there may be RAID-0 and RAID-6 and each with different hard drive configurations. I will explain the simple examples: RAID-0 , which is the distribution but no parity or mirroring, this means that there is no data redundancy, if there is a failure on a disc, it will cause the loss of data on the entire RAID array. Ex: You 0110 as writing the data, 01 goes on disk 1 and 10 goes on disc 2, allowing a faster data read/write access.

  RAID-1- This is the opposite of RAID-0, which is mirrored without interlacing (no parity or the other). Basically, this means that you have an exact clone of disk 1 disk 2 disk 1 failure.

  RAID0 + 1 is that both RAID 1 and 0 is, IE interlacing (write data simultaneously to two [or more]. disks more mirroring failure) the minimum amount of disks required for this type of installation is 4 IDENTICAL drives.

  There is also RAID 2, 3, 4, 5, 6. That is just more implemented different configurations of distribution/parity/mirroring on disks.

  That being said, your RAID mode will allow you for some type of RAID configuration, if you choose to do so.

  Supplement: Many SATA controllers can enable AHCI separately or in combination with RAID support. Recommend Intel choose RAID mode on their motherboards, allowing also the AHCI, rather than AHCI/SATA mode for maximum flexibility (in the case that you ever want to build a RAID array), because there are a few problems that occurs, usually BSOD, when you choose a different mode once an operating system is already installed.

• That means the 'SBB '?

  I'm just curious.

  That means the 'SBB '?

  This acronym is the "CFF"?

  Thank you

  Compact font format.

  Peter

• After that turn the power off for a few days and then back on... all my desktop ICONS was reorganized.

  After that turn the power off for a few days and then back on... all my desktop ICONS changed. I placed the worms where I want that they and computer restarted and they get rearranged again. Help, please.

  Hello Kenneth Pincus,

  You can create a new profile on the computer and if the desktop icons stay on their position. If this is not the case, the other profile is corrupt. To create a new user profile, you can see the article mentioned below for the procedure.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

   

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  Let us know the results.

• We are a non-profit 501 c 3 that is the subscription price for us?

  We are a non-profit 501 c 3 that is the subscription price for us?

  Hello

  Adobe products are available from Adobe re sellers for Non Profit Organizations. Please refer following eligibility non-profit organizations

  For the list of Adobe re sellers nearby, please visit http://adobedealreg.force.com/PartnerSearch?lang=en

• that means the error: 213:11

  that means the error: 213:11

  I have tried to re - install, but it keeps returning the same error

• That means the (B) the acronym for when you enter a new task start Date?

  When you start a new task, the start tag says:
  Departure (B):

  What does the acronym for the (B)?

  Thank you!

  I don't know about you, and I do not have Thunderbird here with me to check right now. In your position, I would like to experiment. I suspect it's a keyboard shortcut to start ('start'?) a new definition of the task with a single keyboard action.

• What does the acronym FROSTED for?

  Hello

  I see the acronym FROSTED or OP so everywhere used instead during the sale to load of the cables for the devices, but I can not find any of the terms online dictionary which defines it.  Someone can tell me what he means and means?

  Thank you

  Wonder Woman

  Hello

  OPS is the name of a third-party manufacturer / brand name.

• That means the (3) in a network connection

  I noticed that sometimes I'll see a Mac connected on a network from parenthesis after its name, as in Bob's Mac (3).

  What does the (3)?

  This can be a cause or an index of network problems?

  If so, what would be the cause or the index.

  Thank you

  M.

  Typically, this means that there is the third incarnation of the "Bob Mac' your system has seen.

  The sidebar is filled with servers that are available on the local network. Over time the BONE songs which sound servers view, but if she sees a machine with the same name as another device but, for some reason, it don't think it's the same device, it adds an integer name of the server.

  Typically, this would indicate that there are three machines on the network called "Bob Mac", but it could also be a flaw in the heuristics that make the OS think that is not the same "by Bob Mac" has been seen previously (either because of a bug, perhaps a system upgrade, etc.).

• Shortcut that replicates the button sleep for Windows Tablet 8.1

  I am trying to create a shortcut icon on a Windows 8.1 tablet that does the following.  I hope someone with knowledge of Microsoft can answer definitively.

  It must accurately reproduce the function being called when I quickly press the power button on the side of the tablet. What do I mean by that?  I mean that when I push the power button.  The Tablet goes into a State of "sleep".  If the button is pushed once again, or the menu button 'Start' then the Tablet refers to the lock screen.  I currently have a Toshiba Encore 2, but I am aware of postings on the internet that others have different tablets like Dell coming Pro.

  Because someone will suggest.  There is a particular reason, I want to avoid the power button.  These tablets seem to have a very small, delicate, poorly designed power button that slides out of the internal contact.  I'm afraid that the button won't survive the abuse of my children, so I'll try to give them a soft touch.  The goal is to reduce the time they need the physical button.

  I've been around the internet on this.  I want to clarify things that DO NOT WORK on THIS TABLET.   In addition, nothing is 'evil' with the tablet.  This is something that is not well documented, or is not possible on Windows 8/8.1 Microsoft

  1. it DOES NOT WORK: Rundll32.exe powrprof.dll, SetSuspendState - it hibernates the tablet. What I'm looking for.

  2. it DOES NOT WORK: Rundll32.exe powrprof.dll, SetSuspendState sleep - this also extended to the tablet. What I'm looking for.

  3. it DOES NOT WORK: Rundll32.exe powrprof.dll, SetSuspendState 0,1,0 - this also extended to the tablet. What I'm looking for.

  4 powercfg-h off failover makes 1-3 doesn't DO NOTHING, don't sleep reported, suggested, documented

  5. in the course of running powercfg /a reports that s1 - s3 sleep and hybrid are not supported "when connected standby is supported.

  6. I don't want a solution consisting in autohotkey - I'm looking for a management system dll that can be called from a shortcut without having to install a utility

  7. it would seem that the bios/firmware that supports connected disabled standby mode options 1-3 + 4 as viable

  8. the shortcuts are not what I'm looking for on a tablet like win - x or alt - f4 - I am aware of these and how they work

  9. I know that I can get to sleep using the power icon in the menu of charms.  In fact, this icon works in the way, I'm looking, but is less convenient that just touching an icon in the start menu.

  I guess what I'm looking for is.

  1. explanation of this sleep mode, I want to talk to (is it connected standby?)
  2 clarification about whether this "standby" is accessible via a dll or another system call which can be shortened would be - of course there is a system call because the charms of power icon is accessed.

  Thank you for any input constructive or educational.

  RS

  The closest I could find is to create a vbs script and save it > create a shortcut to the vbs script

  Dim ObjShell
  Set objShell = CreateObject
  objShell.ShutdownWindows
  Set objShell = nothing
  Set WshShell = CreateObject ("WScript.Shell")
  With objShell
  WScript.Sleep 200
  WshShell.AppActivate "closing Windows.
  WshShell.SendKeys "ss".
  WshShell.SendKeys "{TAB}".
  WshShell.SendKeys "{Enter}".
  Ends with
  Set objShell = Nothing

  http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Windows_7/A_10680-A-script-to-put-Windows-7-into-sleep.html

  You can also consult the RCMP in any kind

  https://www.grc.com/Wizmo/Wizmo.htm

• that means the value '*.local_listener '?

  Hello

  I have a few databases of production (all 10 gr 2 [10.2.0.5] ad hoc with no expectations) and two from then to contain this in the settings:

  • * .local_listener = '(description = (address = (protocol = ipc) (key = register)))'

  Please could someone explain what means this parameter value?

  And a server 10 g ASM [10.2.0.5] 2. In the settings of the ASM, I found this:

  • * .local_listener = "LISTENER_ + ASM"

  Like many, I know, ASM does not headphone. If that is correct, what is the purpose of this?

  Best regards

  user130038 wrote:

  Hello

  I have a few databases of production (all 10 gr 2 [10.2.0.5] ad hoc with no expectations) and two from then to contain this in the settings:

  • * .local_listener = '(description = (address = (protocol = ipc) (key = register)))'

  Please could someone explain what means this parameter value?

  And a server 10 g ASM [10.2.0.5] 2. In the settings of the ASM, I found this:

  • * .local_listener = "LISTENER_ + ASM"

  Like many, I know, ASM does not headphone. If that is correct, what is the purpose of this?

  Best regards

  LOCAL_LISTENER indicates, how to find a listener with which register the instance.  Just like saying any client program (like sqlplus) how to find a listener to ask a database connection.  You can hard code connection info, or specify a network service name to be resolved via tnsnames.ora

  As the doc

  LOCAL_LISTENERSpecifies a network name that resolves to an address or a list of addresses of Oracle Net local listeners (i.e. listeners who are running on the same computer as this instance). The address or the address list is specified in the TNSNAMES.ORA file or another trustee address configured for your system.

  I guess that the weakness, there is that like many 'reference manual' documentation, it tells what something does, but no explanation of why you might want to do.

  See: http://edstevensdba.wordpress.com/2011/07/30/exploring-the-local_listener-parameter/ (exploring the local_listener parameter) for more explanations.

• That means the "unexpected internal application error?

  Hello world
  
  I just saw this message for the first time tonight. Nobody knows what it really means?
  
  "An unexpected internal application error has occurred. Please contact < MyCompanyName > and provide reference # for further investigation. »
  
  This message seems not familiar to me at all. I do not know where Apex becomes my company name of. Any ideas?
  
  Thank you
  Kim

  Hi Kim,

  I assume you are using the example of database Application or similar application. This message is displayed by the 'manipulation function Error' demand. Go to "Edit Application Properties"-> "Error Handling"-> "error handling function. The referenced function is a stored function or package in the database that contains the code needed to handle the error in the application. It allows you to map errors in a new text of the error. See http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-1/ and http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-2/

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf