That port with which protcol connects InDesign to the folio producer?

Similar Questions

• Using of Windows 8, need to remove outside wireless connections that interfere with my wireless connection - unable to do

  Two unwanted connections always connect, and I guess they are somewhere in the neighborhood.  'Delete' never appears, I read means that they have security blocks are not actually using my computer.  However, they interfere in some way because whenever I have remove control of these two connections and click on mine, they come immediately with the checkmarks.  Therefore, the Explorer, "you are not connected to the internet."  Quite frustrating.  Sure that if I use explore 9 or 10, as note am access to explore my office rather than splash screen.

  Link in double wire and content:

  http://answers.Microsoft.com/en-us/IE/Forum/IE10-windows_8/need-to-delete-outside-wireless-connections-that/3413ce5b-400C-4C83-9cab-6fd54d13e1e6

  need to remove outside wireless connections that interfere with my wireless connection - unable to do.

  2 outside wireless users interfere with my wifi connection. Cannot remove them. Today, my wifi was totally blocked on Windows 8 with an asterisk in addition to the wifi icon. Finally, shut down the computer for a while, started again and immediately accessible all 3 networks and disconnected two parasites. However, computer won't let me remove them entirely (i.e., no ' delete'). Is there a way to do it - makes me crazy? One person suggested access "Manage network connections", but couldn't find where, he said, it would be. Thank you.

  Hello

  Thanks for the reply. Refer to these methods and check the status of the issue.

  Method 1:

  a. open the charms bar, click/click on settingsand then click / tap on the Network icon.

  b. click right , or tap and hold on the wireless network (ex: Brink-router) in the list of networksand click/click on forget this network.

  Note: Windows does not provide the option 'Forget this network' if there is a profile high-speed Mobile which is supplied by the carrier. The option appears only when a custom or user profile is created.

  Note: 'Forget this network' is not available for networks wireless listed that not create you a network profile for.

  Method 2:

  Alternatively, you can refer to this method:

  a. press the Windows and X keys .

  b. click on (Admin) command prompt.

  (c) in the command prompt, copy and paste the following command and press ENTER.

  NOTE: this command will give you the list of all profiles of wireless network on your PC.

  netsh wlan show profiles

  d. in the command prompt, type the following command and press ENTER.

  NOTE: this command will delete the wireless network profile.

  netsh wlan delete profile name = "WirelessProfileName".

  For example, if I wanted to delete my profile from the 7shp (name) listed wireless network, I must type the following command exactly.

  " netsh wlan delete profile name = ' ' 7shp '

  e. close the command prompt and check the status of the issue.

  I hope this helps.

• I have 2 computers and 2 discs of software windows 7, but did not label them regarding that goes with which computer - how do I know?

  I have 2 computers and 2 discs of software windows 7, but did not label them regarding that goes with which computer - how do I know?

  They are the same version of windows? If so, it does not matter. If they are not: win + pause/break or start menu, make a computer right click, properties. This will pull up what edition you are running (32 or 64)

• All of the fonts that come with Dreamweaver CS6 are licensed for the use of the web?

  All of the fonts that come with Dreamweaver CS6 are licensed for the use of the web?

  I also have Creative Suite 5, which I think is delivered with a set of Adobe Fonts. These are all licensed?

  A license?  Yes, but not necessarily for the web. Some licenses permit use on paper or images but not the web.

  • Custom Web fonts

  For legal reasons don't assume that you can use any font you want on the web. Fonts are protected by the intellectual property laws in the same way that software is protected against illegal copy, modify or distribute. In other words, an owner of fonts can of course, saying "you can use my font, but you cannot change it, you can not reproduce and you may not distribute." On the web, which is a deal breaker, because you must be able to do all three.

  These font families are common to most Windows/Mac systems.

  • Battery CSS Fonts: Web Safe and family of Web fonts with HTML and CSS code.

  Adobe Edge and TypeKit Web fonts are licensed for use on the web.

  • Free fonts, web fonts | Download the free trial version Adobe Edge Web Fonts
  • Typekit

  Nancy O.

• Can I use the the same validation key that came with my computer is restored after the installation of a hard disc more?

  I bought a refurbished Dell desktop and you want to install a hard drive, can I use the the same validation key that came with my refurbished computer and if now what can I do?

  Original title: renovated

  Yes, you can, but I recommend that you use the following method to pass safely the license to drive bigger hard:

  http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

• Object with several States and slider in the "folio" are pixelated, settings seem correct.

  I can't keep an object with several States to be rasterized text, as well as a slider which is also dithering.

  I read that you are supposed to adjust the folio, and article up to be .pdf and the cursor should have the possibility of vector chosen.

  I have not found anything to object state multi for these parameters.

  What happens is when I exit the folio to Adobe Content Viewer, only the text of these items is rasterized. All other texts to be crispy. Tested on Mini iPad and iPad retina and both are blurred.

  Is there a way to force the vector option? It seems even with the selected options it is still screening test in interactive elements.

  Thank you!

  I don't know if I missed something, but it seems to work now. Maybe the v26 option (I deleted the old folio and recreated, and it works as expected now.)

  Can you send me a link to information about the scrolling content and the position of the document? The method I used the frame was from an article of Adobe, although it could be old.

  Thanks for your help!

• Cannot remove the tape on the printer cartridges that came with my new printer according to the instructions.

  Product name/number - Deskjet 1000 printer J110 Series

  Operating system - Windows 7

  No error message, I can't get there

  No changes, he just arrived by mail

  The installation sheet says to remove the ink cartridges before pushing the transparent tape.

  There is a clear pink band which I couldn't remove a little bit of a corner and have toner all over the fingers to do. The band is perhaps too dry, be flexible, but I can't do it. What can I do?

  I have not tried the printer connected to my computer again, because I did not get that far in the installation instructions.

  Hi gmaharriet,

  Looks like that you actually remove the strip of copper flex of the cartridge. Remove more of the band with blue or pink tab is not covered by the warranty of the cartridge. You will need to purchase a new cartridge to complete the setup of the printer. Take a picture of the cartridge and then attach it to this post.

  Please see the following for a good removal of the protective film.

  http://support.HP.com/us-en/document/c02227508

  

• Windows Vista tells me that I have a wireless connection. However, the internet does not work. How can I fix it?

  The small globe appears telling me that I have a connection and bars 1 to 3 (of 5) but I can't load the internet or online games. I just installed a game called Rohan online. Se that screwed up my connection? Also, I use AVG as my virus protection. I see that it blocks the packets, but even when I turn it off temporarily can't connect to the internet. What is the problem?

  Hi Morgan0o0o,

  (1) web browser you use to access the internet?

  (2) what is you receive the exact error message?

   

  Method 1: You can see the steps outlined in the article below

  You cannot connect to the Internet from a Windows Vista computer that uses a .pac file local

  http://support.Microsoft.com/kb/937151

  Method 2: How to troubleshoot network connectivity problems in Internet Explorer

  
  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211

   
  

  Method 3: We can consider the uninstallation of Rohan online game and then check if the problem persists.

• FTP with Dreamweaver CC connects not to the point Windows 8.1

  I just bought a new system and went to Windows 7 where everything worked very well, to 8.1 Windows. With the same settings, I can not connect via FTP to my server.

  I checked with the firewall and its not be blocked.

  Does anyone know why this would be?

  Thank you, turned out to be McAfee!

• computer that crashed with cs5, how do I get the new computer

  My old computer crashed.  I was at school and got the student of cs5 version I downloaded there.  How can I get that on my new computer without having to buy new?  I bought lightroom for my new computer, but it really lacks the power of cs5.

  You can download CS5 through the page linked below, but you must purchase your serial number to activate it.

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

• reports that runs with status FINISHED_WITH_ERROR.how to see the error log

  Hello
  I executin the following codes
  
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, ASYNCHRONOUS);
  SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_FILENAME,'/U02/oradata/data/reports/PE4.RDF');
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, file);
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'PDF');
  SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_DESNAME,'/U02/oradata/data/reports/AA.PDF');
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_SERVER, 'rep_ora_apps');
  v_rep: = RUN_REPORT_OBJECT (repid);
  IN all, REPORT_OBJECT_STATUS (v_rep) in ('MARKET', 'OPENING_REPORT', 'PENDING')
  LOOP
  message ("status is ' |") REPORT_OBJECT_STATUS (v_rep));
  i: = i + 1;
  If I have > 100 then
  "exit";
  end if;
  END LOOP;
  message ("status is ' |") REPORT_OBJECT_STATUS (v_rep));
  
  ----------------
  The messages I've had are
  
  IN QUEUE
  IN QUEUE
  IN QUEUE
  IN QUEUE
  RUNNING
  RUNNING
  RUNNING
  FINISHED_WITH_ERROR
  
  Could you please tell me how I can see the error log?
  
  Concerning

  Hello

  to see the error:

  1 generate the error again
  2. Enter the following URL in your browser:

  [http://:/reports/rwservlet/showjobs? rep_ora_apps = server]

  You will see the last task. Click x status to see the error.

  Kind regards
  Joe

• Problem with USB auto connect with clients that connect through the Security server...

  Lack of VMware View 5.0.1 with 2 servers connection and a security server. When the clients connect directly to the server connection, USB connection works very well... users can use their USB drives and other devices with their VM. The problem occurs when they attempt to use their USB devices when negotiated through the Security server.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing so it does not always work... customers just to get the scrolling message of office in the USB menu initialization.

  Our current facility is:

  External IP address-> DMZ (Security Server)-> connect to server

  Entrust us our firewall config through our ISP (we are not overloaded with scientists here, it's just me, so things like little help my work load). They are certainly not incompetent (or at least were not in the past). I had to open the external 32111 IP port to the DMZ, then of the DMZ to our connection server that is used for external connections. Everything about VMware View works perfectly for the clients that connect this way, but not USB devices.

  One thing I give is if our having a configuration of VLAN dedicated for customers views influence what either. I'm trying to keep an eye on what ports are open that for our firewall for my records, but I do not see where I openly opened ports on the internal side of security server to our internal network. He must have the port opened directly from the internal face of security server of vmware 32111 discovers clients?

  The firewall Guys tell me that they checked over and over that port 32111 is open throughout the. They also said that they tried to telnet 32111 to our security server port and have nothing back (should have gotten garbage at least according to them).

  An idea of the next steps to take? It is obviously a blocked port, I just have no idea why at this stage.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing it still does not work

  This is not what it takes. The agent is listening on the port 32111, you must open the firewall to allow connections to the Security server for the desktop on port 32111 (same thing you must allow RDP and PCoIP).

  Mike

• Is it possible to update the version of paint which comes with vista home premium to the version of paint that comes with Windows 7?

  Greeting cards

  Hello

  Is it possible to update the version of paint which comes with vista home premium to the version of paint that comes with Windows 7?

  Hi, the paint that comes with Windows Vista is designed by default design. See the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-paint

  It will be useful.

• connection for printing from a computer wireless with a connection cable to the router usb printer?

  Produst name: HP Officejet Pro L7555.

  Works with Windows 7.

  A new router and the modem was installed when Comcast installed our wireless connection.  This of course did not work with the current setting of the printer.  The printer is connected via USB cable to the router.

  Are you sure it's a USB and not an Ethernet cable?  I bet it's in the affirmative:

  1. disconnect the Ethernet cable.

  2. on the printer: Setup > network > default settings.

  3 reconnect the Ethernet.

  Now, remove the printer in Control Panel > devices & printers, then add it again like this:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• I'm waiting times tries to access a parallel port with VISA

  I get VISA time-out errors when you try to write to the parallel port. MAX said that the port works and I should be able to communicate with him. Device Manager Windows 2000 also said that the device works. I use writing to the parallel port with VISA example I found on the site of nor. To make it even more confusing (or), it runs on one computer but not another. All software and drivers are the same on both machines. On one who gives me the error of time-out, I am able to write to the parallel port using "accesshw".

  What a coincidence. The computer that I had problems with is also a Dell Optiplex. The pins of wiring together the way that you have specified has solved my problem of timeout. The cable I got with just bad has terminals 11 and 12 low attached as indicated on the page with a link to the code sample titled "with the help of VISA to access the Parallel Port in LabVIEW" I know why the original cable worked with a bridge but not a Dell Optiplex. Thanks for the quick fix!