I'm waiting times tries to access a parallel port with VISA
I get VISA time-out errors when you try to write to the parallel port. MAX said that the port works and I should be able to communicate with him. Device Manager Windows 2000 also said that the device works. I use writing to the parallel port with VISA example I found on the site of nor. To make it even more confusing (or), it runs on one computer but not another. All software and drivers are the same on both machines. On one who gives me the error of time-out, I am able to write to the parallel port using "accesshw".
What a coincidence. The computer that I had problems with is also a Dell Optiplex. The pins of wiring together the way that you have specified has solved my problem of timeout. The cable I got with just bad has terminals 11 and 12 low attached as indicated on the page with a link to the code sample titled "with the help of VISA to access the Parallel Port in LabVIEW" I know why the original cable worked with a bridge but not a Dell Optiplex. Thanks for the quick fix!
Tags: NI Software
Similar Questions
-
Original title: trying to access Wireless Utility Setup with a printer LexMark impact S305 on windows 7, can nybody help me?
lxeapss: error loading DLL communication, I get this pop-up box several times trying to access Wireless Utility Setup with printer. I have tried, defrag, virus scan (vipre), stop, went to the Lexmark Web site to get the latest software downlaod for printer?
Hello
Click on the link below.
http://support.Lexmark.com/index?page=content&ID=so4452&locale=en&UserLocale=en_US
Hope this information helps.
-
I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?
I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.
In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.
Hello
I suggest you to visit these links and check if it helps:
It will be useful.
-
Trying to access a specific clip with a chain
OK, what I'm trying to do is create videos as much as I need, and then access these video clips using string values. These string values are stored in a table and coincide with a given instance movie clips name. See the following code:
I think my problem is that Flash is trying to call methods of clip from movie on a string instance. I don't know how to type cast in Flash, or even if it is possible, but how would access channels under the video clips?DuhChamp,
> I think my problem is that Flash is trying to call the movie
> clip on a string instance methods.> I don't know how to type cast in Flash, or even if it is
> possible, but how acceding like movie channels
> clips?Use eval() or the access to the table operator, []. Details here...
http://www.quip.net/blog/2006/Flash/ActionScript-20/reference-objects-dynamically
David
Stiller (at) quip (dot) net
Dev test: http://www.quip.net/blog/
"Luck is the residue of good design." -
I have blank page while trying to access the virtual shop with Journ.E tou
After the update and reset, the page is empty, no access to the virtual store
as I entered the serial number S / n: PX1530U-1ET1 :-) the correct S / n: this is not used and I don't know how I can fix it with correct password
What to do about it? Without virtual store shelf is useless.
Thanks for any solution...
Post edited by: mirokmiro
My personal accounts is: 33460
Can't anyone help me?
Thank you
-
RV220W - rules of access/redirection of port with multiple WAN IP addresses
I just installed a Cisco RV220W - that works very well for outbound traffic, however for incoming it seems unable to work with multiple WAN IP addresses.
We have a block of 6 WAN IPs assigned to us by our ISP, and I want to use each of them to expose certain ports on our servers to the outside world.
I tried to do with rules (by using HTTP, for example) with the following parameters:
Connection type: Inbound (WAN (Internet) > LAN (local area network))
Action: Always leave
Service: HTTP
Source IP: Unique address
Start:
Send to the Server Local (DNAT IP):
Use other WAN (Internet) IP address: disabled
Status: Activated
However, the port of the inaccessible Server/rest.
I tried:
- Restart the server with power power off again
- implement the same port forwarding settings
- triple-checking all the IP addresses used
The only way that I have working is by changing the access rule so that it applies to any specific source rather than to another address... but this isn't a solution for us because we need to use specific IP addresses to the internal servers/ports specific.
The interface of the router admin certainly suggests that this should be possible, but using it seems to break all incoming access!
Any suggestion is welcome.
You must use "ANY" as the source IP address, you publish your internal server to the internet and the internet means that the request comes from any source IP address (you don't know what it is, so that's all.
Basically, you want any source IP to hit one of your WAN IP on port 80, and then your firewall will redirect the request to the internal private IP address of the server on the same port 80. And when the answer comes back internal server, the firewall will already have this translate entry in and reverse NAT won't happen (you must configure it, the default firewall function).
I hope that I have answered your question.
Please mark as correct, if you like the answer.
Thank you
-
Part using the computer seems to have picked up a virus. Another person signed and restore the system. That seems to have stopped virus but when the person initially tries to use their sign on happens c\windows\system32\rundll32.exe message when it tries to access some programs (check mcafee, visit the center of security etc.) when you try to open some programs on the main screen, it says "choose program to open this file" mcagent.exe. Any help would be appreciated.
Hello
It seems that the virus is not completely removed. I suggest that refer you the link to retrieve the computer of infection and check if it helps.
Computer viruses: description, prevention, and recovery
http://support.Microsoft.com/kb/129972
Let us know if it helps.
-
five out of six times (approximately) to start outlook express 6, it crashes while trying to access the first message. This happens several times, and each time the first message (even) appears in the Inbox, even if the process is not complete. sometimes clear the cache, or cleaning IE temp. the files seems to help - but not always.
It's VERY frustrating!
Do a household.1: do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.Information on the maximum size of the .dbx files that are used by Outlook Express:
http://support.Microsoft.com/?kbid=9030952: after you're done, followed by compacting your folders manually while working * off * and do it often.Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.3: disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3For some programs, turning it off is not enough. You may need to uninstall and reinstall in custom Mode and remove the analysis when e-mail messages. -
I'm trying to access the functions tells me windows explore stopped workingI
original title: Explore Windows crash
Unable to access any windows especially update function, which is where I am responsible for the problem. I'm trying to access the functions tells me windows Explorer has stopped working
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Server wait times 2012 - Win 7 - DNS Client
Background:
Single Server R2 of 2012:
Domain controller: * field (192.168.0.12)
Primary DNS Active Directory integrated, double cards configured network team
Clients Windows 7 Pro:
Quantity 15 (with an assigned static IP, no DHCP, all cables, wireless), defined primary DNS on 192.168.0.12
Cisco SmartSwitch SG200-26 - show NO error on one of the ports
Randomly the DNS server stops just in response to DNS queries.
Clients receive Error 1014: no DNS servers responded ORS
Wait times when Internet browsing and access to the local server
Computers lose all network connectivity, (as long as I use 192.168.0.x references I can access files on the network) just DNS resolution
Customers (when it works)
nslookup microsoft.com
Server: server2015.* *.
Address: 192.168.0.12
Non-authoritative answer:
Name: microsoft.com
Address: 23.100.122.175
When things do NOT work
nslookup microsoft.com
Server: unknown
Address 192.168.0.12
Unknown can't find microsoft.com: no response from Server
After a few minutes, I can retry the command NSlookup and return works.
All Windows updates have been installed on the server and the clients.
This server / configuration is only 2 months old. New server hardware and software. Replace Windows SBS 2003. Customers have been the same.
Tried to disable all anti-virus, disabling all services necessary, re-configured to use only one network card. The problem is more common that a new server has just arrived.
I have no idea where to go from here.
Thank you
The problem ended up being the on the DNS server. The local ISP changed the DNS server address and the forwarder was not set correctly on the DNS server.
Thanks for all the support.
-
Suspect Maleware / Trojan.
This has happened
Each time Firefox opened
== I tried to access a website
Hello Dave deaf.
It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.
If you need help with one of your modules, you will need to contact the author.
In addition, it is possible that your system is infected by malicious software. To search for malicious software, install, update and run these programs in this order. They are all free for personal use, some have limited functionality in their 'free mode', but the features you won't miss are not really necessary to find and remove the problem you have. Remember that not all programs detect the malware even!
Malwarebytes' Anti-Malware - malwarebytes.org/mbam.php
SuperAntispyware - superantispyware.com
AdAware - lavasoftusa.com/software/adaware
Spybot Search & Destroy - safer-networking.org/en/index.html
Windows Defender - microsoft.com/windows/products/winfamily/defender/default.mspx
Dr Web Cureit - freedrweb.com/cureitIf they can't find it or cannot erase it, please tell me and I will provide you with further assistance.
-
Error 1706 Outlook Express tries to access MS Pic there! 2002 flat Pub to check spelling?
Lately, whenever I try to send an OE email trying to access my MS Pic there! Pub dish. 2002 program to do?
It's never happened before.
How can I get it back to normal?
Here's my sys Info:
Name of the operating system Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
Manufacturer of operating system Microsoft Corporation
Name of the COMANCHE system
System manufacturer MICRO-STAR INTERNATIONAL CO., LTD.
System model MS-7238
System Type X 86-based PC
Processor x 86 Family 15 Model 4 Stepping 1 GenuineIntel ~ 2999 Mhz
BIOS Version/Date American Megatrends Inc. V1.8, 01/12/2007
SMBIOS 2.5 version
Windows C:\WINDOWS directory
System directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
The local United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
UsernameTime Zone MST
Total physical memory 048,00 MB 2
2.65 GB available physical memory
Total virtual memory 2.00 GB
Available virtual memory 1.96 GB
Page file space 6.34 GB
Paging file C:\pagefile.sysWhat other information do you need?
I would like to just get back to 'normal' mode to check spelling before you send it without the strange access to MS Pic?!
I believe that the Association is messed up but do not know how to fix
Thank you
PS - Here's the msimn.exe version: 6.0.2900.5512
I was not able to find something new.
- What spell do you use? (OE has its own).
- Spell check only causes this, or pressing on send do as well?
- The only way to reinstall OE is to reinstall XP, because it is a part of it.
Try in a new identity. File | Identity | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.
Note: Do not use the main word in the name of the new identity.
How to create and use identities in Outlook Express
http://support.Microsoft.com/?kbid=209169Bruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA -
"My laptop works on Vista. I get a message warning that a program is trying to access my computer and fix it in unusual ways on my C drive. It comes from the library of Visual C++ from Microsoft and reports a runtime error. When I try to make the X it told me to wait, and when he finished my screen go empty. I took the battery out and restart with the power cable the same pop-up window. (I've got press din't ok cause someone else did and it dint work) Error running Visual C++ Library. I get a message warning that a program is trying to access my computer in an unusual way on my C drive. It comes from the library of Visual C++ from Microsoft and reports a runtime error. When I try to turn the x he go wait for me and then my screen is white. I took the battery out and restart with the power cable the same pop-up window. How can I fix this please.
Hi Macyiorge,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
Method 2: You can reinstall Visual C++ Library Runtime components.
You can uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.
Step 1: To uninstall the package:
a. open programs and features.
b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.
c. right click top and select Uninstall.
d. restart the computer.
Step 2: Download and install the latest package and see if it helps.
For reference:
-
Application module tries to access the secure API
Hi all.
We are new to Blackberry Java development and have some problems with it.
We use the same BlackBerry Bold 9000 and OS worm Simulator. 5.0 in Eclipse JDE.
The JDE version is 5.0.0
We signed HelloWorldDemo with tool of power, provided by BB. It worked fine on the Simulator AND the device.
Then we signed our own application, based on PictureScrollFieldDemo.
The thing is, on the simulator of OUR application works fine, but when we try to run on the device, it failed with an error that says something like this: "Application module tries to access the secure API."
After that many times we tried to remove the code all potentially dangerous and recompile the application. After that it stopped working at all (when you click on the application menu, ABSOLUTELY nothing happens).
Then, we decided to try to launch PictureScrollFieldDemo, the sample provided by BlackBerry. Also, it did not work
Finally, the HelloWorldDemo has stopped working or the other...
During all this madness, we rebooted the unit several times.
Please help, appreciate any advice.
Thanks in advance, geezmo.
You should have received 3 keys, RBB, CPR and RRT. You imported all 3 when you have been setting up the signature tool?
-
Event 1002 DHCP while trying to access Adobe Elements 8
WHILE TRYING TO ACCESS THE HELP OF ADOBE ELEMENTS 8 PROGRAM STOPS RESPONDING. AFTER TALKING TO ADOBE, WE FOUND THAT I AM GETTING A DHCP ERROR 1002. I LOOKED THROUGH, BUT I CAN'T DECIPHER THE APPROPRIATE RESOLUTION. ANY CONTRIBUTIONS TO THIS ISSUE WOULD BE APPRECIATED
Is your version of 32-bit Windows or 64-bit?
Your internet connection is working correctly? This error message is produced by Adobe, when he fails to connect? What browser do you use? What firewall and malware in real-time what software is installed?
You have installed all updates of Adobe?
http://www.Adobe.com/support/downloads/product.jsp?product=40&platform=Windows
Hope this helps, Gerry Cornell
Maybe you are looking for
-
Satellite L500-13D-CD/DVD drive does not read CD
Hello I have a Toshiba Satellite l500-137 laptop with vista sp2.There is a cd writes that my dvd drive would not read, the driver can read other CDs & DVDs well.who says cd's seems to be fine as it can become red from the other computer. any suggesti
-
How can satellite P500-024 - I do a new partition with full disk space?
Hello I just bought the Satellite P500-024 and it came with 640 GB HARD drive. I just found when clicking on * my computer * which is the HARD drive is cut to the drive C: and D: drive. How can I add the D drive half of the HARD drive on the C: drive
-
IPv6, WRT1900AC, Android and Google Services
Hey guys,. I recently discovered that I had to disable IPv6 in my rotor must be able to connect to Google services on my android products. Does anyone else have this problem? Any ideas as to why this would be the case? I am running the latest FW for
-
Can I use a working android code to build a pure Java application. I don't want the port directly. I want to convert an android app for Bb 10 working versions of a Java for BB 6.0 and 7.0 application verson etc.
-
I have a dell dimension e520 desktop pc that turns on but only the fan goes inside the pc & it does not start any HELP!