That's what I get as my CR - ROM status and I can'r read CDs or DVDs again... Can someone help me please?
No available drive
Description CD-ROM drive
Loaded media no.
UNKNOWN media type
Name of the Oxtiazc (D ^ D (R_ ID - 7 = 68 a (ATA Device)
Manufacturer (Standard CD-ROM drives)
State error
Transfer rates 307.13 KB/sec
SCSI target ID is not available
IDE\CDROMOXTIAZC PNP device ID (_D ^ D (R__ID - 7 = 68 a (___DH18___\5&2A7BAA5D&0&0.0.0)
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
Can someone help me please? my email has been hacked and my password was changed, I don't know what to do, please help someone
Hello
If you are referring to the problems of hotmail please repost in hotmail forums
http://www.windowslivehelp.com/product.aspx?ProductID=1
Consult with Microsoft Certified SolutionsClick on the links to go directly through your chemical below problem -
l accidentally changed the info in the upper left corner of my pic in Lightroom to display the parameters of the camera and prefer would be - it to show pixels. Can someone help me please change it back? l have no idea what l knocked on
to change to the 1st place.
Hi VickeyD,
Please 'I' on your keyboard again.
You can change these settings in view > view options
Concerning
Assani
-
Two days ago I have introduced photos of my baby in my PC and automatically became the program Adobe Photoshop Album Starter Edition 3.2. Then they were deleted from my camera. Then I tried to access the photos in Adobe Photoshop Album Starter Edition 3.2, but I read that since the end of June we need a code of decoding and that now it is not availabel. So I do not have this code, and I need to access the photos. Please, can someone help me?. Thank you.
Mona, go to My Documents, my pictures, click on the file "Adobe", click on the photos to digital devices and you should see your last download by date or by any name you assigned to a .jpd file. I hope it works for you. Fred
-
I get major errors that led me to think my windows files have been modified and currupted I just can't install microsoft updates they download, but I'm unable to install, I'm unable to use the Disk Defragmenter and disk scan as it said my system is already in use. I am also unable to use my acer factory restore settings because it loads but never finishes running can someone please help! I am not in a position to buy or pay for a new cd of windows so that I can make a new clean instalation as I can't afford it can someone please help!
Download of updates of work but the installation of updates arnt working
installation of games arnt working cd - I get errors
disk defragment simply does not work I click top but nothing happnens - perhaps sumthing to do with priviliages admin, but I am the administrator.
Scan disk does not work as it says system is already used but works if I put it to run at reboot
MY acer DEFAULT factory restore setting does not work it loads but never short - that led me to believe I have no control over my privliages of basic windows system, but I am the adminsitror.I already had major problems when WIndows would break and stops working when you start up, I managed to solve this problem in safe mode and disabling some start up programs to check the malware was eventually attached to my system using windows scanner and malwarebytes defnder, I managed, but it seems that it is undetectable.
I am unable to afford a new cd for a new clean instalation of windows, I think I need. can someone please
Hello
There is no Windows Vista downloads available from Microsoft.
You can contact Acer and ask them to send you a set of recovery disks.
They should do this for a small fee.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
It comes to the use of the partition Recovery of Acer to restore factory settings.
http://Acer.custhelp.com/app/answers/detail/A_ID/2631
Note: During the process, all data stored on your computer will be overwritten. This means that all of your files, such as e-mail and photos, will be deleted. Therefore, we recommend making a backup of all data before starting the recovery process.
To start the system recovery:
- Restart the computer.
- When the Acer logo appears on the screen, press the left Alt and F10 keys.
- If you are prompted with a Microsoft Windows splash screen, press the Enter key.
- After that the Acer eRecovery Management application is loaded, select your type of restore.
- Read the review and then click Next when you are ready.
- Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
- Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Some manufacturers have more available Vista recovery disks.
If this happens or the recovery Partition is damaged, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
I tried to fix this problem buy posing difficulty it Center Microsoft, but they can't too. My problem is (1.Recycle Bin is corrupt) (2. Icons randomly change to different icons). Can someone tell me what caused this and how he can fix? Thanking you. Roy rose.
Hello RoyRose,
For the question, Recycle Bin is corrupted check to see if KB article below may help you:
Article number: 297760 - Error Message: the trash on C:\ Is damaged or invalid. Don't you want to empty the Recycle Bin for this...
http://support.Microsoft.com/kb/297760To cause change of the different icons icons, see the article below:
Article number: 132668 - icons randomly change to different icons
http://support.Microsoft.com/kb/132668I hope this helps.
-
Yesterday it was working fine, this morning, I tried to open cs6, and I get the above message. Tried to put the file in my laptop (copied to a USB key) and when I close all the windows files is not displayed again, and ps6 shows me this message above. I use a 27 "iMac computer. I've installed a plugin (WhiteWindowworkaround.plugin1_0_6.zip) to correct my problem of cursor. PLEASE HELP ME...
The first thing I would try would be to manually reset preferences. If this fails, try to uninstall the plugin and see if the problem goes away.
In case you don't know how to reset:
Reset preferences
(1) close the program, and then press Ctrl + Alt + Shift (Win) / command + Option + shift (Mac) (not reversible) starting
or
(2) move the folder. See:
http://www.Bugge.com/family-and-friends/Illy/Illy.html
-OB
-
I tried a system restore to an earlier date, that I went that far back that could, and it still does not. I have had no file BITS so I followed some advice and managed to get one via a command and now it does not start. I am trying to install what is called the hotfix for windows (using some other tips) it worked for over an hour now. I wouldn't hold my breath that it will work for all advice would be welcome. Thank you.
Sweet!
-
I tried to look it up and it is said that something an antivirus if he stops working, but the antivirus is mckaffee and I have avast then mounting steps are completely different and I have no idea what im doing.
Hi bloomfieldroader,
1. did you of recent changes on the computer?
2. what Messenger or the program you use to video call?
3 when was the last time it was working fine?
If you use Windows Live messenger see link and check if that helps.
(V14) Microsoft Live Messenger 2009 videoconferencing functionality does not work after installing SiteAdvisor
http://service.McAfee.com/faqdocument.aspx?ID=TS100601
If the previous step fails you can post your query in Windows Live forums if you are using Windows live messenger or MSN messenger.
-
I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working
Hello
· Faced with this problem specific to uninstalling the application with the printer, or with another application?
· What is the brand and model of the printer?
You can follow the method below and check if it helps.
Method 1:
I would say as you put your computer in a clean boot state and check if it works.
How to troubleshoot a problem by performing a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.
Method 2:
I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.
http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program
Hope this helps,
-
What can I do? I get this error when updating the app Photoshop CC (U44M1P34)
U44... Update error http://forums.adobe.com/thread/1289956 can help
-
I have tried everything I can think and suggested in your base of knowledge, but FF does not open. I downgraded to a version earlier, but which did not help so I uninstalled everything and did a clean reinstall of the 7.0.1. I restarted at every stage.
However, when I tried to put my favorite chrome (so I could continue to work) he says that FF was opened. Same thing when I went to uninstall. The Task Manager is not running. Chrome works is not my internet connection.
I have not installed a new software or hardware recently, although I've improved Roboform to the latest version. This is the reason to update to FF addon RF was not compatible with the version of FF I used.
I scanned for virus and the machine is clean.
I'm on a PC running Windows 7 Home Premium. Right now I'm working on my old laptop but I need to FF works on my main machine.
Any help much appreciated.
Thank you
Kathy
-> Recovery of data from an old profile
Check and tell if its working.
-
Hello. I just tried to send an email from an account that I do not usually use. It failed, and now I can't send from another account that I do not have an Outbox and is not in the air currents. Any suggestions? Thank you.
I just searched on the web and after hearing accounts offline, closing mail then the reopening and taking it up online accounts, the Outbox reappeared!
-
error code 80070490 cannot install windows update.
Ken,
0 X 80070490 - ERROR_NOT_FOUND
Corrupted system file. You will need to perform an upgrade on the spot or reinstalling the operating system.
Ignore the title: Some Windows Vista functions may not work, or Windows Vista may stop respondinghttp://support.microsoft.com/kb/929833
A repair install is that the usual of SFC/scannow solution does not work.
You receive an error code "0 x 80070490" when you use Windows Update or Microsoft Update Web sites to install updateshttp://support.microsoft.com/kb/958044
-
I just the Z3 away iTunes.
I just want to drag and drop music ontop my phone from my XP computer. No software stupid man in the middle. IE use the Z3 as a SD card can be used as a phone and a music player.
Im not that technicale and I too want to be. I just that it works without becoming a scenetist of the computer.
I checked the Device Manager and there is no exclamation point. Also when I plug my Z3 or our it plays the tone USB (my XP computer)
Any help much appreciated.
Have you installed the software companion of Xperia?
In addition, you can change the type of connection to charge only?
I think it's in the settings, more and the USB connection mode
Maybe you are looking for
-
I can't connect my Satellite L500 WLAN
Laptop:Toshiba Satellite L500, windows 7 Home premium Problem:Something wrong with the wireless adapter, where it works very well for 30 minutes after the start of the computer, but all of a sudden, it is is turned off by itself and I couldn't allow
-
best keyboard for iPad 2 air wireless
I just recently bought an iPad 2 64 GB air. as a gift. I'm looking to get my daughter a wireless keyboard. I looked at the keys to logitech to go ultra portable this varied reviews on Amazon and my husband has noticed that there are no £ sign key j
-
How to make a table with ActiveX Excel using Excel_RangeSetValue2?
Hello I want to make a table in Excel. For this, I use two functions: Excel_WorksheetGetRange and Excel_RangeSetValue2. I write the table on Excel file, but only the first instance of the table is copied. Here, a part of my program: char * DataToWrit
-
When I put a photo on my "office" he says that this feature is disabled, how can I fix this so I could place a personal picture as my desktop?
-
Alerts calendar of Smartphones blackBerry does not
My calendar entries have yellow bells by them, but the Bb do not give any kind of alert beep or a vibration when the APPT is due. I looked in the calendar options, profiles, where my Bb has the 'normal' value and settings, but nothing on the calendar