that text is open in any window

Similar Questions

• I have an ASUS M4A88TD-M/USB3 motherboard. The problem is that I can't find any windows 8 compatible LAN drivers for it.

  Problems of Windows 8 pilots.

  I just installed Windows 8 preview of developer on a virtual machine, I have an ASUS M4A88TD-M/USB3 motherboard. The problem is that I can't find any windows 8 compatible LAN drivers for it. All solutions?

  Given that Windows 8 has not been released yet not all drivers will work with him. Some drivers are very precise on the version of operating system, you may need to wait until they release the pilots of Windows 8 (if they make it to your model).

  If the drivers do not install, try their installation in compatibility mode.

  Troubleshoot Compatibility

  This can help with some (but not all the) programs/drivers:
  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.
  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.
  (3) after he set up see if it works properly. Note: some programs are perhaps not able to run in Windows 8.

• What is the best PDF output for a vector that can be opened on any vector program?

  0 down vote favorite

  I m a vector problem with PDFs made with Illustrator (Ai CC 17). When I send them to other designers or clients with an older version (CS5) that they can't open PDFs in artificial intelligence. I thought Universal PDF and should work with ANY version of AI, as well as any version of ANY program there vector (Inkscape, Corel, etc.) ... If it has to do with my output PDF Properties dialog box when save as PDF in my CC Ai? -What I need: I want to be able to output my vector illustrations in a PDF format that is UNIVERSAL and can be opened and edited by everyone about what vector program, they have and even Word documents. -Someone told me to deselect the option "preserve Illustrator editing capabilities" in the PDF output dialog box.  It will be enough?

  Please enlighten me

  This kind of work falls into a category that should be editable in many applications of vector. But maybe not all in the same easy manner. And maybe not in other software such as Word.

  More compatible file format is EPS (version 3). But this file format is a bit dated and indeed should not be used in modern workflows. So even if you enable some users, you turn off others.

  Therefore, it is best to offer multiple formats. But even in this case, you will get all of your users.

  You might want to delve deeper into other software formats and file if you want to get into this new.

• Create a hyperlink that does not open a new window if a window containing the url is already open?

  Is there a way to create a hyperlink to a url that ' climbs to ' window of the URL if it is already open in the browser?  Therefore, a new window does not open and the existing window containing the hyperlink would not change either.

  If the target url is not already open, then yes the link could be open in a new window or in an existing window.

  Does anyone know if there is a command/code for this?

  Hello

  from the point I understood, that I see, is the relative to the appearance as described here (I used "function in my DW help):

  http://help.Adobe.com/en_US/Dreamweaver/CS/using/WScbb6b82af5544594822510a94ae8d65-7d2da.h tml

  Quote:

  In the target menu in the property inspector, select the frame or window in which the document is bound to appear:

  • _blank opens the document in a new browser window, leaving the current window untouched.

  • _parent opens the document linked in the frameset parent of the frame that the link appears, replace the set of frames together.

  • _self opens the link in the current frame, replacing the content in this context.

  • _top opens the document in the current browser window, replacing all frames.

    Frame names also appear in this menu. Select an image named to open the document linked in this framework.

  Hans G.

• Icons and links do not work, they all say .encre and get an error "to open this file, windows needs to know which file was used to create".

  I uninstalled a program a few days ago and I think that it uninstalled the things I needed. All my icons tell .lnk and a message appears that says "to open this file, windows needs to know which file was used to create it.  I can't access my add or remove program file.

  I can't delete email, a lot about different programs does not work when I click on them with my mouse.  I have windows 2005.  My PC is in good condition with a lot of memory left and I have antivirus protection.  Help?

  Hello

  I suggest following the link below and follow the steps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/Windows-file-associationunable-to-load-eg-vlcink/d14b86ae-b02f-40fd-bf3f-5bf7922f5542

  I hope that the above information is useful!

• Microsoft office outlook error: "cannot open the outlook window.

  Outlook office 7 will not open this am.  It worked yesterday.  The message is simply that it "cannot open the outlook window.

  Try;

  Start > run... outlook.exe /resetnavpane (NB the space between exe /)

• save emails as files text or doc that can be opened by other programs, such as word or program credits doc.

  Hi, I am looking to save important legal email a text or document file that can be opened by word or a generic document program because lawyers have no firefox. Any help appreciated thanks

  The integrated capability that you can use is to save e-mail messages in HTML format. File | Save under... and you select HTML as the file type. It will be opened in a browser, or even a word processor. But they can be complicated to transport since there are often an auxiliary file for embedded images.

  I hope that if you save messages in format eml native, your lawyer email client should be able to open them.

  In both cases, the ImportExportTools add-on - it can make your life easier if you need to record a large number of messages.

  I think a safer option for you would be to print to PDF. If your OS has not this built, there are various free PDF writers. My own experience with the lawyers, it's that they seem to like the PDF format, so that they are likely to have a PDF reader. And of course Windows had PDF display and built-in since Windows 7 capacity-building.

• Can I change the text in the pop-up window that appears when I hover over an icon to the toolbar?

  There are three icons of the toolbar I need to change the popup text.
  They are:

  "Window or close the open tab".
  "Close all tabs but the selected one.
  "Close all tabs".

  I would like to know where this text is stored so that I am able to change my wording preferred, such as:

  "Close this tab".
  "Close other tabs".
  "Close all Tabs" - OK, the last one is great!

  Thanks for any help you can give.

  - Baht
  

  OK, I found the text.

  The text is called the "tooltip" and it is an extension called "buttons of the toolbar.

  The file is called "button.dtd" and is located in the buttons.xpi toolbar / chrome / button.jar / local / en - us.

  I edited the text, replace the .dtd file in button.jar, updated the button.jar file in the as file and reinstalled.

  Now my ToolTips, look like I want to.

  Hope this helps others.

  - Baht
  

• When I click on the + to open a new window I don't like the images that arise. I tried to change that in all: config; Browser.newtab.URL, but it will not

  When I click on the + to open a new window I don't like the images that arise. I tried several times to change that through words: config; Browser.newtab.URL. I put in the site I want and it won't change. I tried to put in: blank and it don't work. I'm obviously something wrong - can you help please?

  Thank you

  If Firefox is ignorant preference browser.newtab.url, the usual culprit is an extension.

  You can open the page in Firefox Add-ons using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons
  • in the Windows "Run" dialog box, type or paste
    firefox.exe "about:addons"

  In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions. Do not forget that all extensions are optional, none come with Firefox, and you can learn more about them by checking their reviews on the site of the Add - ons.

  Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?

• When I click on a link that opens a new window, it takes an unusual long time to open. (16 to 20 seconds). Even with the opening of Firefox when I turn on my laptop.

  Once it is open, it works fine. I can move the document or page without any problems, it's just the opening. This does not happen when it opens a new tab. Only, when it opens a new popup page. Same thing with Firefox from opening in the morning. I did the same process in IE and has not had the same problem.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Also, make sure that your security software is blocking windows (pop-up).

• If Firefox is set as the default browser and any application tries to open a new window, it doesn't work and I get the error "Firefox is already in running... »

  Here's what I'm running:
  Microsoft Windows 7 Service Pack 1, fully updated to 04/10/2012
  New installation of Firefox 11. No add-on enabled following troubleshooting.
  I am a user has administrator rights
  SAMU is disabled.

  For starters, this has happened since Firefox 10 or more. A couple of months now.

  I am able to open Firefox. My modules worked (ABP, Flashblock, ABP Element Hiding Helper, IETAB2, Downthemall, Greasemonkey, extension of 4chan) had no problem. Firefox is defined and has been fixed for the past two years as my default browser.

  But since about 10 or so, maybe Firefox before, if I opened a session of Firefox and any other application attempts to open a session in a new window, I get the Firefox is already running but not responding do not error. »

  I tried to follow the advice of already posted troubleshooting (glance to parent.lock files left [no date], several sessionstore.js [no date] files, create a new user profile, has tried to erase the 'read only' permission in windows 7, but as soon as it is cleared, only read permission back.)

  As a last resort, I deleted the Firefox folder, the directory %APPDATA%/Mozilla in its entirety and then used CCleaner to remove all references to Firefox in the windows registry, and then made a complete re - install, without extensions installed right now.

  I checked the preferences and have the option "open new windows in a new tab" checked. The problem persists without worrying if this option is checked or not. This problem persists in or out of safe mode, even with the new facility.

  Test case:

  All cases:
  Firefox is selected as the default browser for windows 7

  Case 1: Log in to firefox. Use any other program that is trying to open a link to their Web site in a new window browser or the new browser session. "Firefox is already running" error

  Case 2: Open a firefox session. Right click on Firefox in the taskbar. Select 'open in new window '. "Firefox is already running" error

  Case 3: Open a session of firefox. Select the Firefox Menu > new tab > new window. In fact, a new window opens.

  This is the only method of opening a new window in the same browser session or profile that actually works on my system. Attempting to open a browser session from the task bar "open new window dialog" or opening a new window while a current window/session is running will not open firefox in a new window or a new tab in the current session. The "Firefox is already running, but is not responding" error will occur every time.
  

  Make sure that you do not start Firefox with the - No.-remote switch or have defined the MOZ_NO_REMOTE = 1 environment variable (Control Panel > system > advanced > environment variables).

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• Every folder I open it in Windows Explorer starts to run an analysis that goes anywhere in the address bar. How can I stop this?

  In earlier versions of Windows, I would allow the address bar appears at the top of any folder that has been opened.  I'm on Vista Ultimate SP2 now and I'm not sure if the same name is still assigned to this bar at the top that displays inside the location of the folder structure of windows to the folder that is open.

  It is the same field that indicates the status of your search in Vista.  This is the area, to which I am referring.  In the upper left of the folder.

  Whenever I open a folder, it starts what appears to be a search, and the progress of the present poster with the field more in more blue from the far left and go right.

  I thought that since that acts of domain the same when I do an actual search, as she does when I open a folder, that maybe Vista makes some sort of search, or perhapes an indexing function.  I disabled indexing on my system.

  But when even scan darn, or whatever it is, starts on every window I opened.  Is it that a folder with pictures, the pictures does not show until scanning, or everything he does ends or is almost finished.

  Whenever this address bar starts its thing, I can him an 'X' that appears to the right of the address field.  The blue progress bar will suddenly zip through as if it ended, but often nothing happens, like the display of thumbnails for a period after you click 'X'... as if it still makes of anything, that he was not concerned that I hit the 'X '.

  Sorry for the length of this post.  I'm strugglng to describe my question clearly enough.

  If you know what is happening and how to stop it, I'd love to help...

  Thanks for the clear explanation.  I've never heard of this problem before, but it does not sound like opening the file automatically starts the search function - a problem that could be caused by a number of things.  The first that comes to mind is a recent installation program or the Windows Update (or a corruption of the registry) that is causing the problem.  We will approach the problem systematically until we discover the problem (with the procedure with the highest probability of success first).

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  If this started recently, I think that this procedure can solve the problem without requiring you need to go further (but I could be wrong, and the problem may be with some corrupted system files that must be identified and repaired).

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  This could also be malware (although I have never seeen before a kind). Let us make sure that it is not.  In Safe Mode with network (click several times F8 during the boot process) try to run anti-malware programs. To resolve this problem (if it is a problem) download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx (with the same caveat that only program AV one ALONE can be installed and running on your system at any time). Set the scans to be comprehensive analyses and configure the program to fix any problems they find.  Restart after you have completed all the scans. http://www.vistax64.com/tutorials/88236-repair-install-Vista.html , as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure:

  Lorien - a - MCSE/MCSA/network + / A +.

• Impossible to remove e-mail messages in windows mail after that that they were opened

  Windows Mail

  Impossible to remove e-mail messages in windows mail after that that they were opened as a unknown code message keeps popping up

  Go to view | Layout and turn off the preview pane.  Then, you can highlight the message without opening it and delete it.  Also you can go to tools | Options | Read and check the possibility to read messages in plain text only and should not be the same questions when opened.

  Steve

• alt text bug: open windows distort when plane

  apologies if this has already been asked - found nothing

  When I'm analyzing data with PASW statistics package software or play Chess Titans (possibly other programs don't know, this is a recent problem), hovering over * nothing * that has alt text graphics and distort the dimensions of the window (see image).

  http://img687.imageshack.us/img687/5303/alttextbug.jpg

  This bug occurs in the absence of any window in any browser.

  It is incredibly distracting and not helpful in the review of statistical data or have fun with games in leisure.  Y at - it a patch or a fix that I could apply?  Any program that gives birth to this?

  Go to the Web site of the manufacturer of your computer laptop/computer/Graphic card > drivers and downloads Section > key in your model number > looking for the latest graphics drivers for Vista > download/install them.

  See you soon

  Mick Murphy - Microsoft partner

• It seems that whenever I open a folder of photos, stored on my hard drive, a duplicate folder fits in my library of images from windows, which I don't want it to do.

  It seems that whenever I open a folder of photos, stored on my hard drive, a duplicate folder fits in my library of images from windows, which I don't want it to do.  (Windows 7 OS)

  Can anyone help?

  Thanks in advance.

  You go to + photos through libraries > photos?

  Where are you seeing any duplicate?