The 460W power supply will be sufficient for the GTX 1070?

Similar Questions

• This power supply will work with my PC?

  This power supply will work with my PC?  I have a Compaq Presario SR5816F

  http://www.Newegg.com/product/product.aspx?item=9SIA4CP1GF8726&cm_re=power_supplies_500w-_-9SIA4CP1G...

  http://www.Amazon.com/solid-gear-series-ATX12V-SDGR-500BX/DP/B00FF7VEJE

  JCGood1984, welcome to the forum.

  The computer should take a standard ATX power supply unit (PSU).  I suggest to measure the existing PSU and compare measures in the links.  If the measurements are the same, it should fit.  I don't know anything about the brand, however.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• 29W power supply will work for iPad 9.7 Pro

  My iPad Pro 9.7 inches provided with a power of 10 watts. It takes about six hours is responsible for the depletion of the layer to be 100% responsible. I would like to be able to do it faster. I noticed that the iPad Pro with a larger screen has a 29 Watt power supply available in the Apple Store. I bought this with the cable Apple to convert USB type C USB 2, which I am connected to my Flash a USB cable.  When I try on my Pro 9.7 inch iPad it charges no faster than six hours. Anyone who has tried using a larger power and they have managed to improve the loading time?

  The smaller iPad Pro does not have lightning speed USB - C compliant connector which has the bigger iPad Pro, so the special USB - C cable and 29W power supply wiil lightning does not work with the smaller iPad Pro to load more quickly.

  Return these back to Apple for a full refund.

  Sorry

• Adding a new power supply will void the warranty

  Hello

  I would like to replace the power supply 350w comes with the HP Pavilion p6-2378.  I have a 500w I'd replace it with.  Will this void my warranty?  This is the standard of 1 year.  I do that so that I can put a secondary graphics (AMD Radeon 4650 [assuming there is enough electricity to 500w?]) and take advantage of the GPU power and additional outputs. Then, would it be making void my warranty?

  Thank you

  Upgrade your PC with approved HP and parts supplied will not void your warranty.

  However, if you upgrade your PC with parts that are not approved HP and HP determines that the changes caused failure HP is not required to honor the warranty.

  Some PC outside the United States are delivered with seals and if broken the warranty is voided.  I have yet to see the seals on the PC of American consumers.

• In view of the XPS 8700 with GTX 970 upgrade, what would be the necessary power supply / & will fit in the case?

  To anyone who has successfully upgraded their diet to accommodate a more power hungry GPUS, what EXACT PSU did you purchase and how much was easy to install? Links to sites of sale would be great.

  Thank you.

  Personally, I bought a power supply Corsair CX600M it was 150mm, so it should fit in your case.

• Block of power SUPPLY or AC adapter for Satellite 1130-z24

  I just bought a 2nd hand TOSHIBA SATELLITE 1130-z24 laptop.

  He came without a power SUPPLY or charger power.

  Apart from Toshiba own PSU, can I use a universal laptop charger which is compatible with other Toshiba laptops?

  SATELLITE 1130-z24 will cap size similar to that used on other Toshiba laptops.

  Hello

  As far as I know the universal AC adapter part number: PA3165E - 100-240V AC, 50-60 Hz, 75W with DC 19V output would be compatible.

  Just Google for certain online offerings.

  See you soon

• Power supply and graphics card for p6230y

  I have a pavilion p6230y.

  There is no PCI-express slot, but I'm looking for update in the radeon HD 6850 with the new power supply.

  power supply - http://www.newegg.com/Product/Product.aspx?Item=N82E16817139023

  graphics card - http://www.newegg.com/Product/Product.aspx?Item=N82E16814121419

  they work on my desk?

  Thank you!

  The graphics card will be fine, but the power supply may cause problems of space because of the type of power supply (non-modular).

  The OEM case, you should look at modular PSUS. With modular units, you don't have to figure out what to do with all the extras, the unused connectors and wiring. Modular units you come a connectn those needed.

  This OCZ ModXStream Pro 600W Newegg should be perfect. I used power supply, OCZ for years and never had a problem. It is actually less expensive than the Corsair you asked.

• Upgrading power supply and graphics card for HP-Pavilion VD012AA-ABU m9753uk

  Hi guys

  I have a HP-Pavilion VD012AA-ABU m9753uk with OS windows 7 ulitmate and I want to upgrade my graphics card to a Nvidia GTX 560Ti and I was wondering if this card would hold on my motherboard. I know that the motherboard has a PCI Express x 16 slot and be ok 1, but I don't know that I need to look at, I know there are several variants such as ATX and others because I have only a 300 watt power supply, I need to spend at least a power of 500 watts power however im don't know what connectors my computer has to power supply and what kind you provide and also is here a chance to overcharge me my other components such as my processor or CPU due to the increase in power as I currently have a graphics card Nvidia GT 220 installed if that helps at all

  Here are the specs for my graphics card (http://www.geforce.co.uk/hardware/desktop-gpus/geforce-gtx-560ti/specifications)

  also here are my computer Specs (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01817967&prodT...

  any advice you could give me the guy would be great I never made any changes to my computer with acclamations im not sure what to do

  Hello

  Consult this publication document for more information.  Open your PC and measurement.  The NVIDIA 560 TI type is 9 "long.

  I don't see a problem with the NVIDIA TI 560 and the m9753uk.

  You will need a power of 500 watts.  The Corsair CX500 is an excellent choice.

  ' HP ' how-to ' articles should be useful.

• new power supply and HARD drive for t350.it

  Hi, I should install an ATI 4650HD on a t350.it, but the requirements of the system says I need a 400W power supply, while this pc has a 220 W one. Can someone confirm this for me? In this case, can I install a 500W power supply in this pc? Another question, it should be installed even a 500 GB Sata HARD drive, but the location that contains the drives are very close, you can see in the attachment to page 104 page signed 'disco rigído' with the G, can this cause a problem of high temperature? This pc is compatible with a Seagate Barracuda 500 GB SATA?

  You are right.  Is there an AGP version of the card.  I just wanted to make sure that you were aware of the correct version.  Many have made the mistake of buying the wrong type.

  Yes, the PSU's power supply.  Sorry for the use of the acronym without explanation. You will find it difficult to find a more powerful power supply which will be insert in your case.  The 220W is about it.  There is a lot of discussion on the forum about this problem.  I don't want to specify on the thing, however.  The amount of power supplied by a PSU is only as much as the system needs to run.  It has the production capacity of 600W, does not mean that it will be clocked at that power all the time.  It would not damage your motherboard (motherboard) If you have installed a.

  Message edited by old_geekster on 09/09/2009 16:05

• Upgrade HP Pavilion Elite 420it - Radeon HD5770 OK with HP 460W POWER supply?

  I have a HP Paviillion Elite 420it (Core i5 750-6 GB DDR3 RAM - Radeon HD5570 - 460W PSU)

  I think to change the graphics card, mi it is:

  If buying a graphics card AMD Radeon HD5770 1 GB, my pc HP POWER supply can manage consumption Watt?

  The HD5570 2 GB standard in my HP pc standard was low, so I ask that.

  Should we change the PSU, or 460W standard handle for you the new card?

  P. s.

  I don't have a device that uses energy, only the USB mouse & keyboard.

  I'm waiting for the answer before buying the HD5770

  Thank you!

  I bouth the CUCORE of ASUS HD5770, but I felt unsafe to use the HP PSU, so I took the GS600W CORSAIR.

  Power supply and video card fit perfectly in the case, so all is OK now with my pc HP upgrade

• Legacy with defective power supply unit. Looking for replacement source

  RND4000 (ReadyNAS NV + v1 [v3]) group legacy with a power failure. Looking for replacement source. Not after replacement free of charge since it is obviously out of warranty and end of product life. However, it is a little expensive Kit to replace. If I did, I would still want to use it as a backup of synchronization for the new.

  I was unable to find any power supply corresponding by the name given to the unit (ST-220FUB-05F), all the results of my research resulted in a power different with smilar looks and namesake. Main differences are slight changes in the output rails, different output connectors. Also include a fan that mine didn't, perhaps a clue to the failure there.

  I was shocked to find that he was / is none replaceable fuse in the power supply and if there was a gauge commonent that he was unable to do the job because a cracket big mosfet to clean his radiator, think that's what it is, hard to see in here. Unable to find a replacement, I'll have to try to replace the component that is visibly damaged. Not easy because it's crowded in there and may fail because there are perhaps other failing components that didn't explode or evacuate. I really need ot get this unit backup and running.

  Help, please. Consider the purchase of an equivalent of second hand RND4000 for parts. See you soon.

  Hello EkDor,

  This replacement of power supply was free until supplies last and I heard they already ran out of it.

• This power supply will in a HP Pavilion G5410UK?

  Hi, Im running Windows 7 64 bit
  I Am aqquiring a power supply for my graphics card work and I was just wondering if this power supply would take?
  http://www.Amazon.co.UK/Corsair-CMPSU-650TXV2UK-enthusiast-series-performance/DP/B004O0P9TO/ref=sr_1...

  If you can not findout could you please tell me the Dimensions of the PSU that's already in the pre-built system, thank you in advance

  Hello

  You need to open your PC and measure the physical dimensions of your diet. Here is a list of the things to consider:

  1. technical characteristics
  2. the total power - important
  3. amperage 12 + v - important
  4 modular - is not required, but I like the flexibility
  5. guarantee
  6 i7 and SLI ready
  7. energy efficiency
  8 cost
  9. size - standard ATX PSU is 5.5 "by 5.9" by 3.4 "give or take a few tenths
  10. a single + 12 volt rail is a better choice.

  The Corsair PSU that you mentioned could fit but measure just to be certain. It's a two way street and you have to do some work.

• Is a power supply of 300 watts for an EVGA GTX 750 ti sc?

  300W power is the bare minimum for your system according to the specifications you noticed down and would be at the edge of the chasm with a Nvidia GTX added 750.

  Disconnect the USB ports wouldn't make a real difference. You would need a bigger power supply. I would go for a minimum 450W to give unused production capacity. What you don't want is a power constantly work at or near's maximum... :-)

  This power supply 430 Watt would work? Its the only one that I found which fits in my case.

• What power supply should I get for a dell xps 8700 to run a gtx 970

  With the update of the BIOS A10 xps 8700 can now run the 970 gtx, but in my case, I have the same power supply provided with the xps 8700, I was wondering what psu be will need to run the gtx 970.

  It has been reported that it is better to buy a PSU with a depth of approximately 5.9 "
  Power supply ATX Corsair AX760 760w
  http://www.Corsair.com/en-us/ax760-ATX-power-supply-760-Watt-80-plus-Platinum-Certified-fully-modular-PSU

  SEASONIC X-650 (650 KM Active PFC F3)
  http://www.seasonicusa.com/NEW_X-series_KM3_650-750-850.htm

• What power supply continuous is necessary for the HP Photosmart 325 printer?

  I have the above printer that has not been used for a few years and the food is gone!  Can someone tell me please the correct voltage required to operate the printer?  I tried 6 volts and even if the led does not illuminate, the screen displays a series of thin vertical lines color across the width.

  Can somenody offer please... any help?

  Thank you very much

  Hello again,

  I found my diet and so the problem is solved.  Tried to add to it, but have no idea how it works!

  Kind regards

  Alan Munro (happichap78)