the 60334498 BIOS code

Similar Questions

• The HP bios code

  Hello, I'm having problems with my HP Pavilion start and went to watch the boot seq in my BIOS and I cannt gain access.

  I get a code after 3 attempts to default password

  58101397

  Can someone please help?

  Thank you

  Use the posted above unlock code to access the BIOS

  Disable all passwords that are enabled

  If current password request - type the unlock code

  New password, simply press the ENTER key
  Repeat the same thing to check the password column.

  Then exit the BIOS saving & exit option to save the changes.

• Satellite L500 - BIOS update the 100 error code

  I downloaded "sln0v190.exe" (Phoenix WinPhlash 64) and extract to a folder and then choose to run the BIOS flash of routine.

  I get the following error:
  "Failed to retrieve information from the system bios.
  Block BCPSYS signature not found
  Error code - 100"

  As I can't read - and save - the old corrupt BIOS I can't Flash the BIOS again!

  Any ideas please?

  Hey Buddy,

  Update you the BIOS with the administrator account?
  Have you disabled the security software on your computer?
  Toshiba Value added Package is installed?
  What operating system do you use?

  But can I ask why you want to update the BIOS? Problems with the computer? If not I Don t do this update. As you know probably never touch a system running ;)

• Pavillipn g6: helps the avoidance of the bios code please

  Hello. Im trying to get around the bios code on my hp laptop Pavilion g6 series. The code is 68614182. Can someone help me please? Thank you very much

  @Frosties1

  Enter: 77772104

  Kind regards

  DP - K

• Can someone help me to unlock the bios code for HP Mini 110-1134cl

  Need the bios code for 110-1134cl halt code is CNU9412QL2

  Please try: e9lov375k7

  Thank you

  GBL84

  Although I am an employee of HP, I speak for myself and not for HP

• Satellite Pro L20 running Vista has the formidable problem code 12

  I try to get my L20 to use all cards PCMCIA with Vista, but I get the dreaded 12 code problem.
  Y at - it a patch for this problem? I know some Toshiba must have a Vista BIOS works correctly, but there doesn't seem to be one for the L20.

  P.S. cards will work perfectly under XP. Server 2008 also has the same problem.

  You should maybe contact the card manufacturer and ask for help. They are responsible for the functionality of the card and not the manufacturer of the laptop.
  They write clearly that it should work with Vista. So contact them and ask for help.
  They should have enough experience with the configuration and the use of own products.

  Also, I assume that they tested the functionality of the map before they we offered on the market.

• Update the necessary BIOS for Lenevo 3000 G530 on Windows 7 (32 bit)

  I searched the forum and found a topic, I also tried to Flash the bios of my self, but I was unable to do so.

  I downloaded 6get19ww.exe to download driver and when I tried to flash I got an error message saying: "cannot load the C:\DRIVERS\BIOS\6get19ww\PHLASHNT driver. SYS. Please verify that your accounts, if you have no administrator privileges, please sign in again! The error specified has been marked for deletion. Error code: 1072. "

  I tried to launch the updated bios update as an administrator, and I do all of this from an administrator account.

  I am running Windows 7 (32 bit) and would be highly appreciated if you guys can help out me.

  Thank you

  have you also tried to run the bios executable file by selecting "Run as Administrator" (right click > run as admin)

• Aspire One D257-13478 does not start after the system BIOS flash.

  I gave my child a D257 - 13478 new ASPIREONE.

  It came with Windows7 starter - was very slow, crippled and crashed a lot.

  After a while, I have re-formatted the HARD drive to remove Windows-resources-pork-7, and I installed Windows XP Professional (SP3).

  After which, the netbook has been much faster, and I could navigate with 5 windows open browser (FireFox) and NEVER receive (not RESPONDING), as I was always getting with Windoze 7. He's been good for 5 months.

  Anyway, it worked fine except that I could not find driver XP for [CODE 10] Broadcom wireless card,.

  so we were not using WiFi.

  Today I read the suggestion to update my BIOS to correct [CODE 10 number}. I went to acer link and downloaded the BIOS of the Organizer, RAN the EXE and the netbook went to restart.

  When the ACER logo appears, a blue screen flashed QUICK, and the netbook RESTARTS again.

  Asking me to start Windows normally just repeat what's happening above

  When I choose Safe Mode... drivers will charge up to Mup.sys and then the system just REBOOTS.

  When I try the last good Configuration known, same thing.

  Enter the system (F2) shows, Version of the system Bios configuration utility: v1.15

  It used to be all about v1.10.

  .................................................

  Then. What is my next step?

  Will be my HD reformatting and reinstall WIndowsXP DIFFICULTY this problem?

  or

  How can I RESET my Bios to v1.10 (when everything was fine).

  No software to use on a USB key to solve this problem? (because theres no CD don't drive of course)

  Thanks in advance.

  Hi MOne

  The flash will have changed the BIOS settings, so go in the BIOS settings and verify that the setting of the HARD drive is in AHCI mode. If it still does not start XP, then it is worth trying to format & reinstall Windows from scratch.

• HP mini 3125: get the system off code 63327201 on HP mini 3125 - need password to unlock

  The password in the BIOS of a mini HP 3125, someone entered a power... Need password to unlock... The system disabled code is 63327201.

  @cr47

  Enter 72085827

  Kind regards

  DP - K

• Here the details of the blue screen code: (0x84bc8e30, 0xc000009c)

  Looking for a few details to the BSOD codes as follows: * STOP: 0x000000ED (0x84BC8E30, 0xC000009C)

  Has been preceded by: UNMOUNTABLE_BOOT_VOLUME

  No new installation of equipment, etc... computer turned on just as usual and it is in a boot loop that would go as far as the Windows XP screen apearing load for about 5-6 seconds.

  By selecting the mode without failure or any other check-out option made no difference to the cycle...  I hit the F8 key and disabled automatic reboot, see blue screen info.

  I'm hoping not to reformat HD...

  Any help would be greatly appreciated. I don't have the Windows CD

  Thank you

  Here are some gibberish of Microsoft on this message:

  http://support.Microsoft.com/kb/297185

  Goggledygook: any text containing the jargon or particularly convoluted English which results because it is too difficult to understand or even incomprehensible.

  .. and here's my UN-gibberish that tells you how to create a CD from Recovery Console bootable XP in order to be able to run chkdsk/r (which sounds like a good idea):

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• When you try to activate Windows 7 Ultimate, the error occurs: code: 0 * C004F063

  When I try to activate my windows 7 ultimate with the product key. the following error occurs: code: 0 * C004F063, Discription: the software licensing service reported that the computer BIOS is missing a required license. Please solve my problem, thanks.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Downloaded the wrong BIOS update

  Hello, I'm val. It's my pc, http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5071... I downloaded updated bios wrong, H-RS880-ΜATX Motherboard BIOS update which I discovered that my mother board need to update BIOS of motherboard of N-Alvorix-RS880 and I am on this computer now it works very well the only difference I noticed is after I started my computer and log I get a black screen for a while until Windows explore lights, which takes more time to do this, I usually start to the top of the Explorer windowse myself. whenever I'm trying to download the N-Alvorix-RS880 motherboard BIOS update it gives me the bios image 252 error code is invalid or damaged. I have no idea of what having the wrong bios update will do to my computer but I keep my computer on at all hours of the day. I've been looking online and I see computer most people becomes useless and I wonder why mine is not useless, but in any case I hoping to get help, please save me to things I am aware of a .

  Hello Valentink,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you believe that you have installed an incorrect BIOS update on HP Pavilion Elite HPE-510y desktop PC. I checked and the two BIOS updates you link to are for your computer, the only difference is the version the update of the BIOS of motherboard ΜATX-RS880-H is Version 6.11 Rev has what is more recent, then the N-Alvorix-RS880 card motherboard BIOS update which is Version 6.07 Rev A. You cannot install the second update is because the you have a more recent version.

  I wouldn't worry have the incorrect BIOS up-to-date is one you have for the computer. As you can see on the page the two updates BIOS Drivers of HP Pavilion Elite HPE-510y desktop PC are listed for your computer.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• How to reset the iCloud security code

  Can you reset the Security Code iCloud until one has the entered incorrectly too many times?

  (I am connected to iCloud on my MacBook and want to connect on my iPad, but am unsure of the security code to use, so I want to reset it on the MacBook.)

  Apple Help topic for If you register your iCloud Security Code wrong too many times... says:

  …

  On a Mac using OS X Yosemite or later:

  Choose the Apple menu > System Preferences, and then click iCloud.

  Click Options next to keychain.

  Click on change the Security Code, and enter a new cryptogram iCloud.

  My prefs do not show 'Options' beside keychain. (Keyring is enabled).

  I have to go through the process of entry that he incorrectly too many times on the iPad before 'Options' will appear on the Mac?

  There is no way to reset the iCloud security code as it comes to Apple servers.  What specific problems you encounter when you try to connect to your iPad?

• I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  does anyone have a solution to this?

  Hello

  The following steps can help (try again after each):

  • On your iPhone, in the application of the watch, go to: Watch My > general > use > software update - remove any file update, if one is displayed.
  • Delete all profiles beta (on your iPhone and/or the watch), then restart both devices (this applies only if you have already participated in a program of Apple Beta software).
  • Restart your iPhone and your watch:
    • Close open applications on your iPhone:
      • Double-click the Home button, and then drag upward on each Preview app to close.
    • Close the two devices together, and then restart your iPhone first.
      • Restart your iPhone, iPad or iPod touch - Apple Support
      • Restart your Apple Watch - Apple Support

• What is the best terminal codes to rebuild spotlight in the Sierra of MacOS?

  What is the best terminal codes to rebuild spotlight in the Sierra of MacOS?

  The recommended method for re-index/reconstruction is to open Spotlight preferences panel in system preferences, click on privacy. Now add the drive that you want to re - index to privacy window. Now delete this same player of the Privacy window, and it will now be indexed/rebuilt. No necessary terminal command.