Aspire One D257-13478 does not start after the system BIOS flash.

Similar Questions

• HP elitebook 2540p does not start after the successful bios update

  Hello people,

  I need your help.

  my hp elitebook 2540p with 2.5 "hhd does not start after a successful bios f.03 to f.24 upgrade done through windows 7.

  When I turn it on the blue light of wifi and power is on but nothing happen.

  I tried to remove the chip from the bios, cmos, hdd, ram, wifi battery... all, but nothing doesn't happen.

  I also tried to start it with the victory + b procedure and win + procedure four arrows so without USB key the caps lock flashing indefinitely but nothing happens, only the fan works quickly with a blue light

  with the USB the system restarts itself every two seconds and I have to remove the USB key.

  I do not know how...

  Thanks for any help.

  Luigi

  all very well now. I used the f.20 rom based on the internet and everything works again.

• Aspire One D257-13404 does not start with 2 GB of RAM

  Already, it has 1 GB in there and works very well. However when I put this module, it simply won't start.

  This is the module that I put in.

  http://www.crucial.com/USA/en/ct25664bf160bj

  It tested fines in a Dell laptop, I have here.

  Any ideas?

  Hello

  I checked the part number of the memory module said:

  Sorry, this part is not compatible. view the compatible parts

  Aspire One D257-13404 check another system.

• Windows does not start after the system recovery

  I have a Pavilion dv9700 w/Windows Vista 32 bit Home Premium.

  After running the system since the disk partition recovery hard (supposed to be successfully), it restarts to:

  "Unable to start windows.  Recent change hardware or software may be the cause.

  "Insert the windows disc" - the computer did not come with one.

  «Computer or system manufacturer contact administrator»  -HP now wants to charge me for the real-time chat agree that came with my system was "free of charge as long as you own the PC."

  "File windows\system32\winload.exe".

  'status 0xc000000f '.

  'could not be loaded.  The file may be missing or damaged. »

  Help, please!

  Finally found someone who had a Vista disk, so I did a clean install, which fixed the problem.  Then, I downloaded and installed all the HP drivers/software.  It's a shame that computer manufacturers do not issue a disk with the operating system when they sell computers more.  If they gave me one, I could have it fixed in one day.

• Satelite P300 does not start after the failed Bios Update

  Hello world

  I tried to update the bios of a P300 to this:
  18/03/10
  Update the BIOS
  Toshiba Windows 7-32 Bit 4.20 - WIN32 World Wide
  That I downloaded here: http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK after entering my laptops specs.

  The process flash hanged during the update and the laptop became screen starts, blank when turning on and nothing else...
  I tried to use the Phoenix of emergency crisis, created a diskette with the file Bios image that I downloaded but nothing succeeded.

  Access to the floppy drive USB floppy when you enter the recovery mode, I hear the beeps that indicate that a process is carried out, but when everything stops and restart... the problem remains.

  -Does anyone have a clue what to do next?
  -The warranty is void after a bios update attempt?

  Thank you for yor time.

  > - Someone at - it an idea what to do next?
  Well in this case, you will need to contact a local ASP (Toshiba authorized Service Provider).
  Guys could clean CMOS and flash the BIOS ROM module with a BIOS disk special crisis

  You will find here all the FSA all over the world:
  http://EU.computers.Toshiba-Europe.com-> support download &-> locate an authorized Service partner

• Windows xp does not start after the system restore

  Hi, a few days ago, I restored the system to my computer because it showed no hard disks that have been added to the computer. I had no problem before, so I restored the system to the same day. AGTER system restore, my computer would not start. Well, it's not to the point where I'm supposed to pick a user, but instead of a list of users, it shows 'windows xp' on a blue background. I turned the computer off tension and Trier to start in "safe mode", but it did not help. What should I do? Thank you.

  Hello

  Follow these steps and check if they help.

  Step 1:

  Remove all external devices such as printers, USB and then try to start.

  Step 2:

  I suggest that you perform the installation of repair XP on your computer and check if that helps.

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

  Note: Make sure you have uninstalled the latest version of Internet Explorer if installed before to perform the repair facility.

  Reference:

  http://support.Microsoft.com/kb/917964

• aftermath video does not start after the publication of flash catalyst project

  I created a Web site in flash catalyst. I used a video I made after affects only the intro of the site. When I run the project in flash catalyst everything works fine, but when I publish it for deployment on the web and run the .swf file, nothing happens. Anyone know what can be the problem?

  Hi Kirill.

  You do not see the video because Your ' e running the .swf generated to deploy to the web folder. You must deploy to the web to download the content of the files to your web server and it will work fine. (same thing happened to me once)

  You can see the video of intro of your machine by clicking in the .swf in the Local run folder.

  Its happens because the video you created is not embedded into the main.swf.

  See you soon.

• Satellite A100 does not start after the wrong Bios Update

  Yesterday, I upgraded my BIOS of 1.90 to 2.20 for VISTA... now, apparently, I downloaded the BIOS bad a100 to my A100 (PAAS...)

  Now the computer turn on (no display) then a few seconds later stops offshore and turns on again (without interruption), I am under warranty (and the computer is in the store) but I was wondering what to do if Toshiba is not honor the warranty?

  Thank you very much for your help!

  Hello

  I'm sorry to say, but it seems that you don't have the choice.
  You can ask him authorized partner in your country for the help that I know, BIOS update errors are not covered by a warranty and you will have to pay a small fee for fixing.

  In the worst cases, the motherboard must be replaced:(mais peut-être avez_vous une évasion chanceuse et seulement la puce ROM doit être flashée à nouveau)

• Two iMacs does not start after the 10.11.4 update.

  Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

  More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• XP does not start after the installation of avira. Blue screen: STOP: 0 x 00000024 (0 x 00190203, 0 x 87174270, 0xc0000102, 0x00000000)

  Original title: xp does not start after the installation of avira

  I have a HP Slimline s7410
  XP Home Edition SP3
  I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
  I have a cd/dvd drive of work.
  I don't have an XP bootable installation CD

  My system worked well until: I installed the free version of Avira

  Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
  I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.

  Here's what my BSOD looks like:

  Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:
  STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)

  Any help is greatly appreciated! :)

  My first suggestion is to do a system restore at this time point.

  second suggestion is to keep your external drive connected to the pc at all times.  only detach when necessary.   of course, it would be better to install a second hard drive in the computer instead.   in any case, keep your personal files out of the system disk is a wise thing to do.   You can also download and store files for free on the Microsoft Skydrive site.

  third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month.   Basically, you can open the Explorer and right-click on the drive letter.  then select Properties, and on the Tools tab, you will have the opportunity to run the disk check.  then reboot and do a Defrag.   where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.

  Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.

  so my suggestion is to do a series of tests using your cd bootable your computer works.  see if you can actually run a chkdsk/r at the moment with them.    If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them.    in any case, see if your boot at the moment media can run a check disk at all, and let me know.

  fifth proposal is to install "microsoft security essentials" like your anti virus program.  even if you have run ubantu, it is not likely to have been an infected copy.   anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations.    the people who make the virus deliberately their engineer for the windows operating system.   If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too.     Although they no doubt, attacks are more frequent for the windows os.

• Z600: computer does not start after the installation of the 5 TB SATA drive

  My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

  Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• computer does not start after the installation of vista updates.

  computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

  Hello

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope that information was useful