the 7th gen iPod stuck not recognized in iTunes

Similar Questions

• IPod nano not recognized by iTunes - 10 Windows

  My new iPod Nano (7th generation) is not recognized by iTunes (version 12.3.2).  Windows 10 is pleased to recognize the Nano as a USB and I can copy files to the Nano using Windows Explorer.

  When I open iTunes and connect the Nano screen Nano said that it is connected, windows 10 tells me that it is connected, but iTunes displays the message "an iPod has been detected, but it could not be identified properly.  Please disconnect and reconnect the IPod and try again. "

  Tonight, I uninstalled iTunes, followed the instructions on the Apple support site to stop and restart the "Apple Mobile Device Service".  I also uninstalled the windows drivers, the computer uses and then reinstall the drivers, but the only ones that appear are the original windows ones.

  In Device Manager, the iPod is listed in 3 places:

  Hard drives - Apple iPod USB Device

  Mobile devices - IPOD

  Apple Mobile Device USB Driver - universal series Bus controllers

  Serial - USB Mass Storage Device Bus controllers

  When I click on Player update "mobile devices - iPod" it tells me that "the driver software is up-to-date Volume filesystem driver. WPD

  All you other ideas how to solve this problem?

  Thank you

  Have you tried:

  iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  It's the iPod touch forum. I asked that your post be moved to the iPod Nano forum

• 5 Gen iPod will not sync with itunes 12 in 10.11.2

  Hello

  I had a timing problem, where the my iPod Gen 5 has not been recognized under Yosemite anymore. Upgrade to El Capitan - all worked ok until the first OS / X update for 10.11. Now, iTunes 12.3.1.23 as the iPod is not recognized.

  I've tried resets and hard disk mode - nothing has worked.

  To work around this situation, I ended up installing iTunes on a virtual 10 Windows on the same Mac computer. 10 Windows VM detects the iPod correctly and I am able to sync after that I added all the music and books audio to iTunes for Windows library.

  But, I want to turn on my Mac and have the Mac with iTunes for Mac OS sync my iPod. He worked for many years without problems.

  So, I want to come back under Mac OS, re-formatting, and sync as usual.

  Anyone have any idea why the rMAc fo iTunes is not recognizing iPod, iTunes for Windows works?

  iPod classic, OS X El Capitan (10.11.2), iPod Gen 5

  Information module,

  the system log shows that these entries:

  10.12.15 15:32:38, 701 SystemUIServer [812]: try to set a time of iPods, if I don't have any client user.

  10.12.15 15:32:41, SystemUIServer 605 [812]: try to set a time of iPods, if I don't have any client user.

  Bus USB recognizes the iPod correctly and Parallels virtual machine also. The instance of iTunes in the Windows virtual machine recognizes everything is fine.

  Just iTunes 12.3.1.23 under native Mac OS / X 10.11.2 is not!

• iPod nano not recognized in iTunes 10 Windows

  I installed Windows 10 and my. iPod nano - 4th generation is not recognized.  Are passed through all the options suggested by Apple support communities through, You tube for Windows, as well as Windows loads.  Still does not work. Any other suggestions?  Go to the Apple Store?

  I'm having the same problem with my iPod Nano (not sure what generation but I had a lot of time). Everything I've tried is not working. I'm really sorry that I have already downloaded Windows 10. I hope someone can come up with a fix to this problem.

• iPod Touch is not recognized by iTunes

  I did everything in the support pages, but he has yet to recognize my iPod. I tried different cables, ports, computers (it is taken over by other computers with the same iTunes), I uninstalled iTunes several times. I get a prompt my iPod on my laptop is looking to access the photos and videos of my iPod. I always agree (or allow the option says) I'm starting to think that it maybe that my computer can access only the pictures and videos on my iPod and that maybe why iTunes is not pick it up. I have movies on my iPod to my iTunes in sync but I'm really grasp what either. I used the same computer connection, iTunes and iPod for about a year and all of a sudden it happens. I have no idea why this is happening.

  I also posted this topic, subject badly too, help with pointing me in the direction that will be helpful too.

  Help, please

  Try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  Or try the iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  TT2

• iPod iPhone not recognized byiTunes AMD

  I'm picking up a PC of 1 year of my son. There no iTunes installed before installed and I checked all programs like Apple, support for mobile devices etc. work. When I connect my iPod Touch or iPhone that they are not recognized by iTunes. I ran through all the help topics, but all seems fine, except devices do not display upwards. I ran diagnostics under help and he says "not found, no USB port" as well as iPod etc. The iPod and iPhone fortunately appear in the 'My Computer' menu to Windows is to see very well. How iTunes to see them? I use Windows 10 and bang iTunes to update software

  Try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Universal Serial Bus Controllers > Apple Mobile Device USB Driver
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  Or try the iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  If not try a complete tear down and rebuild in accordance with the resolution of the problems with iTunes for Windows updates.

  TT2

• The 7th generation ipod nano has a 30 connector pins

  Hello

  I recently lost my 5th generation ipod nano & want to go to the 7th gen.

  My question is: the 7th gen has the same connector 30 pins, so I'll still be able to use it with my Klipsch iGroove dock?

  Thank you!

  Wendy

  Brightening connector only > iPod nano (7th generation) - technical data sheet

  Check the Apple store for an adapter.

• iPod nano not recognized by windows xp

  Nano 16 gb

  taken but not recognized by the computer or itunes

  Hi Steve_Mills,

  Check out the links below and try the steps mentioned them, check to see if it helps.

  iPod not recognized in 'My computer' and in iTunes for Windows

  http://support.Apple.com/kb/ts1369

  iPhone, iPad or iPod touch: device not recognized in iTunes for Windows

  http://support.Apple.com/kb/ts1538

• has ran windows (vista ultimate) update and then find that my ipod is not recognized by windows or itunes

  ran windows (vista ultimate) update and concluded that my ipod not recognized by itunes or windows, can anyone help?

  Hi BRIANMOODYRU

   

  You can view the articles below and check out them if the steps to help you resolve the issue-

  http://support.Apple.com/kb/TS1538

  http://support.Apple.com/kb/TS1496

  If you need assistance, you can also consult resources and specific apple. You can get in touch with the community of Apple or the support Web site for additional assistance on the issue:
  http://discussions.info.Apple.com/index.jspa
  OR http://www.apple.com/support/

   

  I hope this helps.

• After the recent update to iTunes, my computer is not recognized in iTunes game.

  After the recent update to iTunes, my computer is not recognized in iTunes game.  I am subscribed to iTunes game. My library shows the status of iCloud, and yet when I go into the Match iTunes from the iTunes store, it asks if I want to add this computer.  When I connect and ask the computer to add, nothing happens.  Shouldn't iTunes recognize my that my computer is a Subscriber?

  Hello

  Connect to iTunes. Go to Menu > iTunes > Preferences > general and make iCloud sure music library is checked.

  Jim

• My itunes has been updated the software on my iphone 6 and then it crashed and now my iphone is showing the connect to itunes symbol - but now, it is not recognized by itunes?

  My itunes has been updated the software on my iphone 6 and then it crashed and now my iphone is showing the connect to itunes symbol - but now, it is not recognized by itunes?

  These can help:

  http://support.Apple.com/kb/HT1808

  For a Windows PC, try this http://support.apple.com/kb/TS1538

  For a Mac, try this http://support.apple.com/kb/TS1591

• I have an ifone6 that is not recognized by iTunes. It has a newer version of iTunes, but when I check the updates, it says I have the latest version. Thinking that it is a matter of Win XP. Thanks for help.

  I have an ifone6 that is not recognized by iTunes. It has a newer version of iTunes, but when I check the updates, it says I have the latest version. Thinking that it is a matter of Win XP. Thanks for help.

  You can run the latest version of iTunes for your version of Windows, but you are not running the latest version of iTunes is available and it's iTunes 12.3. You must run Windows 7 at least. I'm not a Windows user, but I think 7 is newer than XP.

  Check this.

  http://www.Apple.com/iPhone-6/specs/

• Solution: The USB floppy drive is not recognized during installation of XP of RAID

  Hello

  This Solution is for notebooks Qosmio with RAID driver during (manual installation of windows)

  I found the Solution to this problem,

  [When you install Microsoft Windows XP by using a floppy drive USB on a player who]
  requires a driver during the installation, the USB floppy drive is not recognized in all
  installation. When Windows XP searches the driver of the second time, he will not be able to see
  the floppy USB drive drive and prompts the user for the driver (RAID) again.
  The installation will never reach this point. ]

  Solution:

  This is a limitation of Microsoft, the Floppy Drive are do not appear in the file Windows 'txtsetup.sif.

  Simply change the floppy drive in another brand and avoid Usb 2.0 external Usb floppy plus old 1 Try
  Also note the back of drive sometimes they write (no bootable) avoid this also

  I personally Test this and it does not work it is "IBM Portable floppy drive" drive silver
  P/N 27L 4226, FRU P/N 05K 9283 TEAC CORPORATION MODEL NO. FD-05PUB

  The following USB floppy drives are listed in the file "txtsetup.sif" and are supported:

  Device ID = VID: 057B and PID: 0000 for external floppy USB SONY drive, Sony 09K 9835 part number

  Device ID = VID: 0644 and PID: 0000 for floppy drive to the external USB, TEAC, IBM replacement part number (FRU) 13N6752

  USB\VID_03EE & PID_6901; Mitsumi USB floppy drive

  USB\VID_057B & PID_0000; Floppy drive USB YEData, Sony part number 09K 9835

  USB\VID_0644 & PID_0000; Floppy drive USB TEAC 27L 4226, FRU 05K 9283 IBM option part number

  The following USB floppy drives are not listed in the txtsetup.sif file and are not supported:

  USB\VID_03F0 & PID_2001; HP
  USB\VID_054C & PID_002C; Sony
  USB\VID_057B & PID_0001; YEData
  USB\VID_0409 & PID_0040; NEC
  USB\VID_0424 & PID_0FDC; SMSC

  If you want manual of Installation of Windows Xp Media Center Edition 2005
  then check out my discussion here

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16498

  Thank you for the very interesting topic.
  I think that it s an enemy of information all of you who have the same problem.

  Thanks ;)

• Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  What do you mean by "assigned to this disk as the location of the Archive" is this something to do with the software you use?

  The drive is formatted for Mac?  Menu go to menu, click Finder go > utilities > disk utility > click on external drives partition - format it sets out Mac OS X extended.   Otherwise, to save the files on the disk and ease than Mac OS

  

• Hello, I recently bought a new iMac and I am wanting to install Lightroom for her, but I'm having some trouble with the key to series is not recognized. There is no disk drive on the new Mac, so I can't just pop the disc in. Is there anyway I

  Hello, I recently bought a new iMac and I am wanting to install Lightroom for her, but I'm having some trouble with the key to series is not recognized. There is no disk drive on the new iMac, so I can't blow my disc. Is there a way I can download it simply by using the key to series on my package? I tried the section "Redeem Code", but said air key is not valid. Thank you

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq