the account invited on our laptop with Vista now is administrator. I can't turn it off.

Similar Questions

• Problems with resetting the firmware and get a laptop with vista to connect

  I have a router and when I registered the product there is a link to a firmware. I have dl and it was v 1.25 in 2002. The Web site settings, I lost a lot of taps. There are now only 3. I would like to know how to recover my original.

  Also, I have a vista laptop. He used to connect to the wireless router when it was unsecured. I tried to wep and secure 64-bit and then used a flash drive to help the implementation of my laptop. The short of it is that it does not work. I get limited connectivity and something about local access only.

  Can someone help me?

  Make sure that you type the correct network on the wireless computer key.

  Also, if it please to wire another computer to the router and check if you have found all the tabs.

• I have firefox 4 beta on Windows XP - do I need vista or W7 to have this orange menu button on the left? on my laptop with Vista FF4 looks different than on pc with XP - why?

  What should I do to have this orange button in FF4 on Win XP?

  Right click on the Menu bar (file, editing, etc.) and click on the Menu bar item in the context menu, so the check mark disappears.

• I can not install the KB2530548 update on laptop with Vista SP2

  I use a laptop with Vista SP2 - cannot update and install the following KB253 548 and switch of IE8 to IE9

  Hi DericKemp,

  1. what happens when you try to install the update?

  2. you receive messages or error codes?

  You can check which version of Internet Explorer is installed on your computer.

  Find out what version of Internet Explorer you are using

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  Step 2:

  You can also check out the following link and try to install the stand-alone update package.

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2530548)

  Hope this information is useful.

• I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again. How do I do that? Thanks in advance

  I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again.  How do I do that?  Thanks in advance

  I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again.  How do I do that?  Thanks in advance

  First, make sure the taskbar don't are not "locked"...
  Right-click on an open space of the taskbar > make sure there is no checkmark at "lock the taskbar".

  Now, make a left click inside of a space open to the taskbar and HOLD > drag the slider down until he goes back down > drop PREY > lock the taskbar. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Dell Inspiron Laptop with Vista installed at the factory does not start.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Dell Inspiron Laptop with Vista installed at the factory does not start. The display shows

  Indicator of treatment MM061 series white 80% in all of the BIOS revision A13 treatment indicator always goes to the same place and stops. I tried to tap the F8 key, but nothing happens.

  If you used Dell or the recovery Partition recovery disks to restore the system, you must talk about Dell problem because it's their software - not Microsoft.  We don't know what's on it or its operation.  We have no information to help us help you.  You need to deal with them.

  Sorry we can't be more helpful.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• the touchpad on my toshiba laptop with windows vista is disable and I don't know who to make it work again

  the touchpad on my toshiba laptop with windows vista is disable, and I don't know who to make it work again.

  Hello

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
  and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
  So usually loaded at the top of the screen.

  There is also usually a TouchPad control utility that loads in the Notification area next to the clock
  at the bottom right.

  Toshiba support - click Communcate for links to the Forums and Contact Toshiba.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba forums - good source of info from others who have the same system or similar
  http://laptopforums.Toshiba.com/

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Also check the control - Mouse - touchpad settings panel.

  You can also try this:

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
  The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
  (drivers), now right CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
  RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
  of work.

  Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
  device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the website of the manufacturer of system (Toshiba downloads - access your model - listed above)
  and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I have a HP laptop with vista that no longer starts.

  I have a HP laptop with vista that no longer starts. I get the initial screen of HP and can access the configuration, but after that, all I get is a black screen with a blinking cursor. I ran the diagnostic test on my hard drive and it happened, but my computer still does not start.

  Hi Shannon6836,

  1. Since when are you facing this problem?
  2. you remember to make changes to the computer before the question?

  3. are you able to boot in safe mode?

  See the methods mentioned below and check if that helps.

  Method 1:

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  If you are able to start in safe mode, follow the steps mentioned below to complete the restore of the system:
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  Note: System Restore does not affect personal files, such as e-mail, documents, or photos. You can only restore files that you have deleted if you have made backups of these files.
   
  Method 2:
   
  I suggest you to disconnect all devices external one except keyboard and mouse and try to start your computer and check if it helps.

  Method 3:

  I also suggest you perform a startup repair and check if this solves the problem.

  Follow the steps below:

  a. Please insert the Windows Vista DVD and restart the computer.

  b. when we are invited to press a key to boot from the DVD, please press enter or the SPACEBAR.
  c. choose your language settings, and then click Next.
  d. click repair your computer.
  e. Select the operating system you want to repair, and then click Next.
  f. in the System Recovery Options menu, click on the Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.
   
   
  If the Startup Repair tool is an option of recovering preinstalled on your computer:
  a. remove all floppy disks, CDs, and DVDs from your computer, and then restart your computer.

  Restart the computer

  b. do one of the following:
  i. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  
  II. If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.
  III. in the display Advanced Startup Options , use the arrow keys to select repair your computerand press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).
  IV. Select a keyboard layout, and then click Next.
  v. Select a username and enter the password, and then click OK.
  VI. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.
  Access the link below for more information on the Startup Repair:

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information helps

• Cannot use the HD on Qosmio G30 drive with Vista OS

  I installed Vista Ultimate on my G30-102. End Ali adapt when I try to use the HD player software. Get the following message:-"unable to output the video to an external device. Please switch display you device by pressing Fn + F5 keys... »

  I'm not trying to use an external device/monitor

  Saw another thread talked about this, but no response. Any help would be appreciated.

  Hello

  Have you bought this laptop with Vista or did you install it manually?

  On the Toshiba driver page, you will find a more recent version of the HD DVD player.
  This time it s a 3.51.06 version for Windows Vista released on 03/08/07.
  Try to update this player and the graphics card driver!

  I wonder if it helps?  :|

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My games suddenly stopped working on my laptop with vista SP 2 after a single pass?

  Ideas: I use a Gateway laptop with vista Home premium sp 2, AMD turion x 2 dual core x 64 bit, fitted an ATI HD 3200 graphics card. (The card is built-in.) He is more than capable of handling the Dead Space, Bioshock, big chase and combat arms and run each of them perfectly at maximum quality, except for dead space, which had to be alleviated a little to improve the speed and responsiveness.

  • Programs: Borderlands, Dead Space, Bioshock, Grand Chase, Combat arms.
  • No error message. Games freeze just to the preloader or splash screen. The processes are still ongoing, but there is no game window or the game got stuck on splash screen. (I have to 'end of process' to stop smoking completely.)
  • Recent changes made to your computer: just closed, each of these games after their execution 1 time, and they would not work again. Problem occurred after a standard, so that could have linked somehow.
  • What you have already tried to solve the problem: compatibility, analysis antivirus, cleaning Mode, running in as long as administrator, disabling firewall, protection against viruses, disabling the registry Disabling UAC, each administrator, update drivers for graphics card, system update, reinstall everything THAT I can think of who could fix this problem.
  • NOTE: I ran these games on another computer and they work fine. A solution to this issue has completely escaped me.

  Have you tried to reinstall or update your directX? or your visual c ++ Redistributable files? Sometimes, if this stuff is corrupted (and you won't know until you start a game generally because it stops working) and you need to reinstall such things.

• I bought a laptop with vista and I was told I have to upgrade to windows 7 free. How do I do that?

  I bought a laptop with vista and I was told I have to upgrade to windows 7 free. How do I do that?

  http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx

  Above Microsoft link has info for the Windows 7 upgrade Options from the various participating computer manufacturers.
  Read the info here to see if you qualify.

  http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx

  FAQ about the upgrade is at the link above.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't install XP multiboot on my current laptop with Vista.

  I would install XP multiboot on my current laptop with Vista. I created a new partition in the goal, but my XP CD (old) does not run the installation program. The error message says it's because the operating system is a later version.

  How can I solve this problem?

  Turn on the laptop. Place the XP disk in the CD/DVD drive. Do a fresh install of XP using the partition that you created.

  Now, Vista does not start because its charger has been replaced by the XP loader.

  See here for the methods repair:

  http://support.Microsoft.com/kb/919529

  This, http://neosmart.net/wiki/display/EBCD/Installing+XP+After+Vista

  from the section installation dual boot could be useful.

  Tom Ferguson

• HP laptop with vista

  I have a HP laptop with vista and when you try to start I get a disk failure hard error 0301... the hard drive is still just working trying to get off the files until it is too late, but the system startup repair prevents me to reboot... any help would be apprieciated, thank you...

  I have a HP laptop with vista and when you try to start I get a disk failure hard error 0301... the hard drive is still just working trying to get off the files until it is too late, but the system startup repair prevents me to reboot... any help would be apprieciated, thank you...

  Probably need to make the drive of the machine, connect it to an external USB adapter and get things off that way.

  Or start on an Ubuntu or other stuff OS CD/DVD and copy bootable on the local hard drive.

• The WPS54G Wireless Print Server works with Vista?

  The WPS54G Wireless Print Server works with Vista? I have a new Dell Vista laptop and unable to connect to the print server. The other XP machines on my network will connect correctly.

  I just got credit working mine in the answers above with a few small differences.

  1. Add the appropriate printer from the control panel > printers > add printer

  2. Select local printer, and then select [Create New Port] > [Standard TCP/IP Port]

  3. [device type] > [TCP/IP device]. Host name or IP address must be the IP address of the print server device.  I use a linksys router and difficulty mine to 192.168.2.10.  Check and are not [query the printer for and auto...]

  4. once nothing is detected, select [custom] > settings

  5. Select LPR, L2 the name value in the queue for a USB printer.  Turn on [LPR active of counting bytes.  Queue names are distinguished by the printer and I think as Mfg ("queue name" search and replacing your printer for queue names.)

  6. Select the Mfg and printer

  7. If the test page does not have a last thing, it is turn on [Control Panel] LPR Print Services > [programs and features] > [activate Windows features ON OFF] pane.  Go to [Print Services] and check on [LPR Port Monitor]

  Hope that makes the magic for you.